eh

KlipperScreen.conf

@@ -12,17 +12,14 @@
 #~# show_heater_power = True
 #~# move_speed_xy = 491
 #~# move_speed_z = 300
-#~# print_view = list
 #~# 
 #~# [graph Printer]
 #~# temperature_fan ebay_fans = False
-#~# extruder = False
 #~# temperature_sensor frame-front-right = False
 #~# temperature_sensor frame-rear-left = False
 #~# temperature_sensor mcu = False
-#~# temperature_sensor cb2 = False
 #~# heater_bed = False
 #~# temperature_sensor t0 = False
 #~# temperature_sensor t0_motor = False
-#~# temperature_sensor stepper_x = False
+#~# extruder = False
 #~#

hardware/manta.cfg

@@ -4,13 +4,6 @@ sensor_type: temperature_mcu
 [temperature_sensor CB2]
 sensor_type: temperature_host
 
-[temperature_sensor chamber]
-sensor_type: Generic 3950
-sensor_pin: PB0
-min_temp: 0
-max_temp: 100
-gcode_id: chamber
-
 #####################################################################
 # 	Bed Heater
 #####################################################################
@@ -38,12 +31,9 @@ pid_kd: 431.393
 # 	Fan Control
 #####################################################################
 
-[multi_pin ebay_fans_pin]
-pins: PF7, PF8
-
 [temperature_fan ebay_fans]
 #	Print Cooling Fan - CNC_FAN0
-pin: multi_pin:ebay_fans_pin
+pin: PF7
 hardware_pwm: false
 control: watermark
 max_delta: 5
@@ -61,6 +51,19 @@ shutdown_speed: 0
 pin: PF6
 hardware_pwm: false
 
+ 
+[temperature_fan nevermore]
+pin: PF8
+hardware_pwm: false
+control: watermark
+target_temp: 50
+max_power: 0.5
+sensor_type: Generic 3950
+sensor_pin: PB0
+min_temp: 0
+max_temp: 100
+shutdown_speed: 0
+
 [fan_generic exhaust]
 pin: PF9
 hardware_pwm: false

misc/bed_mesh.cfg

@@ -1,8 +1,8 @@
 [bed_mesh]
 speed: 600
 horizontal_move_z: 2
-mesh_min: 20,20
+mesh_min: 10,10
-mesh_max: 330,330
+mesh_max: 340,340
-probe_count: 7,7
+probe_count:9,9
 algorithm: bicubic
 adaptive_margin: 5

misc/homing-override.cfg

@@ -3,18 +3,19 @@ axes: xyz
 set_position_z: 0
 gcode:
 
-  G0 Z15
+  G0 Z15 F600
   {% set home_all = 'X' not in params and 'Y' not in params and 'Z' not in params %}
 
-  {% if home_all or 'X' in params %}
-    _HOME_X
-  {% endif %}
-  
   {% if home_all or 'Y' in params %}
     _HOME_Y
   {% endif %}
   
+  {% if home_all or 'X' in params %}
+    _HOME_X
+  {% endif %}
+  
   {% if home_all or 'Z' in params %}
-    G28 Z
+    G1 X175 Y175 F36000
+    G28 Z F600
     G1 Z10
   {% endif %}

misc/misc.cfg

@@ -5,4 +5,4 @@
 [include homing-override.cfg]
 [include arcs.cfg]
 [include skew.cfg]
-[include tmc-autotune.cfg]
+#[include tmc-autotune.cfg]

misc/tmc-autotune.cfg

@@ -13,27 +13,20 @@ max_current: 2.00
 steps_per_revolution: 200
 
 [autotune_tmc stepper_x]
-motor: 17hs19-2004s-ab
+motor: ldo-42sth48-2804ah
-sg4_thrs: 150
+sg4_thrs: 60
 tuning_goal: performance
 
 [autotune_tmc stepper_y]
-motor: 17hs19-2004s-ab
+motor: ldo-42sth48-2804ah
-sg4_thrs: 100
+sg4_thrs: 60
 tuning_goal: performance
 
 [autotune_tmc stepper_z]
 motor: 17hs19-2004s-c
-tuning_goal: performance
-
 [autotune_tmc stepper_z1]
 motor: 17hs19-2004s-c
-tuning_goal: performance
-
 [autotune_tmc stepper_z2]
 motor: 17hs19-2004s-c
-tuning_goal: performance
-
 [autotune_tmc stepper_z3]
 motor: 17hs19-2004s-c
-tuning_goal: performance

printer.cfg

@@ -7,10 +7,10 @@
 
 
 [printer]
-max_velocity: 500
+max_velocity: 300
 max_accel: 4000
 kinematics: corexy
-max_z_velocity: 50 			#Max 15 for 12V TMC Drivers, can increase for 24V
+max_z_velocity: 30 			#Max 15 for 12V TMC Drivers, can increase for 24V
 max_z_accel: 500
 square_corner_velocity: 12.0
 

toolhead/t0.cfg

@@ -6,7 +6,7 @@
 # See docs/Config_Reference.md for a description of parameters.
 
 [mcu t0]
-canbus_uuid: 09006bc75877
+canbus_uuid: 336f4a59eb4e
 
 [temperature_sensor t0]
 sensor_type: temperature_mcu
@@ -25,9 +25,9 @@ accel_chip: adxl345
 probe_points:
     175, 175, 20
     
-[temperature_sensor t0_motor]
+# [temperature_sensor t0_motor]
-sensor_type: Generic 3950
+# sensor_type: Generic 3950
-sensor_pin: t0: PA3
+# sensor_pin: t0: PA3
 
 [extruder]
 step_pin: t0: PD0
@@ -41,12 +41,13 @@ control: pid
 pid_kp: 19.512
 pid_ki: 0.798
 pid_kd: 119.265
-rotation_distance: 5.53014
+rotation_distance: 4.637
 filament_diameter: 1.75
 nozzle_diameter: 0.6
 max_extrude_cross_section: 10
-max_extrude_only_distance: 101
+max_extrude_only_distance: 500
-pressure_advance: 0.018
+pressure_advance: 0.025
+pressure_advance_smooth_time: 0.03
 
 sensor_type:MAX31865
 sensor_pin: t0: PA4
@@ -60,17 +61,23 @@ rtd_num_of_wires: 2
 ## Probe Port
 [probe]
 pin: t0:PB6
-z_offset: -1.5
+z_offset: -0.625
 
 [tmc2209 extruder]
 uart_pin: t0: PA15
-run_current: 0.9
+interpolate: true
+run_current: 0.85
+stealthchop_threshold: 0
+driver_TBL: 0
+driver_HEND: 6
+driver_HSTRT: 7
+driver_TOFF: 4
 
 [fan]
-pin: t0: PA0
+pin: t0: PA1
 
 [heater_fan hotend_fan]
-pin: t0: PA1
+pin: t0: PA0
 heater: extruder
 heater_temp: 50.0
 

toolhead/t1.cfg

@@ -0,0 +1,81 @@
+# This file contains common pin mappings for the BIGTREETECH t0
+# Canbus board. To use this config, the firmware should be compiled for the
+# STM32G0B1 with "8 MHz crystal" and "USB (on PA11/PA12)" or "CAN bus (on PB0/PB1)".
+# The "EBB Can" micro-controller will be used to control the components on the nozzle.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[mcu t1]
+canbus_uuid: 96ef5bff5739
+
+[temperature_sensor t1]
+sensor_type: temperature_mcu
+sensor_mcu: t1
+max_temp: 100
+
+[adxl345]
+cs_pin: t1: PB12
+spi_software_sclk_pin: t1: PB10
+spi_software_mosi_pin: t1: PB11
+spi_software_miso_pin: t1: PB2
+axes_map: x,y,z
+
+[resonance_tester]
+accel_chip: adxl345
+probe_points:
+    175, 175, 20
+
+[extruder]
+step_pin: t1: PD0
+dir_pin: !t1:PD1
+enable_pin: !t1: PD2
+heater_pin: t1: PB13
+min_temp: 0
+max_temp: 300
+microsteps: 16
+control: pid
+pid_kp: 32.859
+pid_ki: 12.170
+pid_kd: 22.180
+rotation_distance: 4.3135092
+filament_diameter: 1.75
+nozzle_diameter: 0.4
+max_extrude_cross_section: 10
+max_extrude_only_distance: 101
+pressure_advance: 0.018
+#sensor_type: NTC 100K MGB18-104F39050L32
+sensor_type: Generic 3950
+sensor_pin: t1: PA3
+smooth_time: 0.50
+
+# 	Probe
+#####################################################################
+## Probe Port
+[probe]
+pin: t1:PB6
+z_offset: -0.85
+
+[tmc2209 extruder]
+uart_pin: t1: PA15
+run_current: 0.6
+
+[fan]
+pin: t1: PA1
+
+[heater_fan hotend_fan]
+pin: t1: PA0
+heater: extruder
+heater_temp: 50.0
+
+#[neopixel hotend_rgb]
+#pin: t1:PD3
+
+#[bltouch]
+#sensor_pin: ^t1:PB8
+#control_pin: t1:PB9
+
+#[filament_switch_sensor switch_sensor]
+#switch_pin: t1:PB4
+
+#[filament_motion_sensor motion_sensor]
+#switch_pin: ^t1:PB3