Fix issues with various bits related to the mainboard

- Chamber thermistor was set to use a 2.2k resistor. Should have been 4.7k
- Speed for homing increased to 600 mm/s
- Removed macros and moved them to macros/

hardware/manta.cfg

@@ -10,7 +10,7 @@ sensor_pin: PB0
 min_temp: 0
 max_temp: 100
 gcode_id: chamber
-pullup_resistor: 2200
+pullup_resistor: 4700
 
 #####################################################################
 # 	Bed Heater
@@ -40,7 +40,7 @@ pid_kd: 431.393
 #####################################################################
 
 [multi_pin ebay_fans_pin]
-pins: PF7, PF9, PF6, PF8
+pins: PF7, PF8
 
 [temperature_fan ebay_fans]
 #	Print Cooling Fan - CNC_FAN0
@@ -55,6 +55,10 @@ target_temp: 50
 max_power: 0.5
 shutdown_speed: 0
 
+[fan_generic exhaust]
+pin: PF9
+hardware_pwm: false
+
 #####################################################################
 # 	Homing and Gantry Adjustment Routines
 #####################################################################
@@ -64,7 +68,7 @@ timeout: 1800
 
 [safe_z_home]
 home_xy_position:175,175
-speed:200
+speed:600
 z_hop:10
 
 [quad_gantry_level]
@@ -78,10 +82,8 @@ points:
 	50,275
 	300,275
 	300,25
-
+speed: 100
-#--------------------------------------------------------------------
+horizontal_move_z: 5
-speed: 600
-horizontal_move_z: 10
 retries: 5
 retry_tolerance: 0.025
 max_adjust: 10
@@ -101,51 +103,3 @@ aliases:
     EXP2_5=PE10, EXP2_6=PE14,      # Slot in the socket on this side
     EXP2_7=PE8, EXP2_8=<RST>,
     EXP2_9=<GND>, EXP2_10=<NC>
-
-
-#####################################################################
-# 	Macros
-#####################################################################
-
-[gcode_macro G32]
-gcode:
-    BED_MESH_CLEAR
-    G28
-    QUAD_GANTRY_LEVEL
-    G28
-    ##	Uncomment for for your size printer:
-    #--------------------------------------------------------------------
-    ##	Uncomment for 250mm build
-    #G0 X125 Y125 Z30 F3600
-    
-    ##	Uncomment for 300 build
-    #G0 X150 Y150 Z30 F3600
-    
-    ##	Uncomment for 350mm build
-    #G0 X175 Y175 Z30 F3600
-    #--------------------------------------------------------------------
-   
-[gcode_macro PRINT_END]
-#   Use PRINT_END for the slicer ending script - please customise for your slicer of choice
-gcode:
-    SAVE_GCODE_STATE NAME=STATE_PRINT_END
-
-    M400                           ; wait for buffer to clear
-    G92 E0                         ; zero the extruder
-    G1 E-10.0 F3600                ; retract filament
-
-    G91                            ; relative positioning
-    G0 Z1.00 X20.0 Y20.0 F20000    ; move nozzle to remove stringing
-    TURN_OFF_HEATERS
-    M107                           ; turn off fan
-    G1 Z2 F3000                    ; move nozzle up 2mm
-    G90                            ; absolute positioning
-    G0  X125 Y250 F3600            ; park nozzle at rear
-    BED_MESH_CLEAR
-    
-    # The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
-    # command pair is to restore the printer's coordinate system
-    # and speed settings since the commands above change them.
-    # However, to prevent any accidental, unintentional toolhead
-    # moves when restoring the state, explicitly set MOVE=0.
-    RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0

macros/g32.cfg

@@ -0,0 +1,8 @@
+[gcode_macro G32]
+gcode:
+    BED_MESH_CLEAR
+    G28
+    QUAD_GANTRY_LEVEL
+    G28
+    G0 X175 Y175 Z30 F3600
+  

macros/macros.cfg

@@ -1,4 +1,6 @@
 [include buzz.cfg]
 [include sensorless-homing.cfg]
 [include print-start.cfg]
+[include print-end.cfg]
 # [include sb-leds.cfg]
+[include g32.cfg]

macros/print-end.cfg

@@ -0,0 +1,24 @@
+[gcode_macro PRINT_END]
+#   Use PRINT_END for the slicer ending script - please customise for your slicer of choice
+gcode:
+    SAVE_GCODE_STATE NAME=STATE_PRINT_END
+
+    M400                           ; wait for buffer to clear
+    G92 E0                         ; zero the extruder
+    G1 E-10.0 F3600                ; retract filament
+
+    G91                            ; relative positioning
+    G0 Z1.00 X20.0 Y20.0 F20000    ; move nozzle to remove stringing
+    TURN_OFF_HEATERS
+    M107                           ; turn off fan
+    G1 Z5 F3000                    ; move nozzle up 5mm
+    G90                            ; absolute positioning
+    G0  X175 Y350 F3600            ; park nozzle at rear
+    BED_MESH_CLEAR
+    
+    # The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
+    # command pair is to restore the printer's coordinate system
+    # and speed settings since the commands above change them.
+    # However, to prevent any accidental, unintentional toolhead
+    # moves when restoring the state, explicitly set MOVE=0.
+    RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0