diff --git a/.moonraker.conf.bkp b/.moonraker.conf.bkp
index 199ded2..0af90d0 100644
--- a/.moonraker.conf.bkp
+++ b/.moonraker.conf.bkp
@@ -3,22 +3,19 @@ host = 0.0.0.0
 port = 7125
 klippy_uds_address = /home/biqu/printer_data/comms/klippy.sock
 
+[file_manager]
+enable_object_processing = True
+
 [authorization]
 trusted_clients = 
 	10.0.0.0/8
 	127.0.0.0/8
-	169.254.0.0/16
-	172.16.0.0/12
 	192.168.0.0/16
-	FE80::/10
-	::1/128
 cors_domains = 
 	*.lan
 	*.local
 	*://localhost
 	*://localhost:*
-	*://my.mainsail.xyz
-	*://app.fluidd.xyz
 
 [octoprint_compat]
 
@@ -28,6 +25,14 @@ cors_domains =
 channel = dev
 refresh_interval = 168
 
+[update_manager Klipper-Adaptive-Meshing-Purging]
+type = git_repo
+channel = dev
+path = ~/Klipper-Adaptive-Meshing-Purging
+origin = https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging.git
+managed_services = klipper
+primary_branch = main
+
 [update_manager mainsail-config]
 type = git_repo
 primary_branch = master
diff --git a/KlipperScreen.conf b/KlipperScreen.conf
index f84b448..e28e7eb 100644
--- a/KlipperScreen.conf
+++ b/KlipperScreen.conf
@@ -9,4 +9,9 @@
 #~# [main]
 #~# screen_blanking = 300
 #~# show_heater_power = True
+#~# 
+#~# [graph Printer]
+#~# temperature_sensor mcu = False
+#~# heater_bed = False
+#~# extruder = False
 #~#
diff --git a/hardware/manta.cfg b/hardware/manta.cfg
index 5a73cc1..a231a59 100644
--- a/hardware/manta.cfg
+++ b/hardware/manta.cfg
@@ -4,6 +4,13 @@ sensor_type: temperature_mcu
 [temperature_sensor SoC]
 sensor_type: temperature_host
 
+[temperature_sensor chamber]
+sensor_type: Generic 3950
+sensor_pin: PB0
+min_temp: 0
+max_temp: 100
+gcode_id: chamber
+
 #####################################################################
 # 	Bed Heater
 #####################################################################
@@ -45,6 +52,7 @@ min_temp: 15
 max_temp: 80
 target_temp: 50
 max_power: 0.5
+shutdown_speed: 0
 
 #[heater_fan hotend_fan]
 ##	Hotend Fan - CNC_FAN1
diff --git a/hardware/steppers.cfg b/hardware/steppers.cfg
index 0f2a664..11d318c 100644
--- a/hardware/steppers.cfg
+++ b/hardware/steppers.cfg
@@ -15,7 +15,7 @@ endstop_pin: tmc2209_stepper_x:virtual_endstop
 position_min: 0
 position_endstop: 350
 position_max: 350
-homing_speed: 100   #Max 100
+homing_speed: 25   #Max 100
 homing_retract_dist: 5
 homing_positive_dir: true
 
@@ -26,7 +26,7 @@ interpolate: True
 run_current: 0.8
 sense_resistor: 0.110
 stealthchop_threshold: 0
-driver_SGTHRS: 80
+driver_SGTHRS: 70
 diag_pin: PF4
 
 ## Y Stepper on Motor2 (A Motor)
@@ -43,7 +43,7 @@ position_endstop: 350
 position_max: 350
 
 ##--------------------------------------------------------------------
-homing_speed: 100  #Max 100
+homing_speed: 25  #Max 100
 homing_retract_dist: 5
 homing_positive_dir: true
 
@@ -55,7 +55,7 @@ run_current: 0.8
 sense_resistor: 0.110
 stealthchop_threshold: 0
 diag_pin: PF3
-driver_SGTHRS: 80
+driver_SGTHRS: 60
 
 #####################################################################
 # 	Z Stepper Settings
diff --git a/macros/print-start.cfg b/macros/print-start.cfg
index 947dd3c..860361e 100644
--- a/macros/print-start.cfg
+++ b/macros/print-start.cfg
@@ -88,4 +88,4 @@ gcode:
   G0 Z0.4                                          # Raises Z to 0.4
   G91                                              # Incremental positioning 
   G1 X100 E20 F1000                                # Purge line
-  G90                                              # Absolut position
\ No newline at end of file
+  G90                                              # Absolut position