[gcode_macro PRINT_END]
#   Use PRINT_END for the slicer ending script - please customise for your slicer of choice
gcode:
  SAVE_GCODE_STATE NAME=STATE_PRINT_END
  SET_FAN_SPEED FAN=exhaust SPEED=1
  SET_FAN_SPEED FAN=bed_fans SPEED=0
  M400                           ; wait for buffer to clear
  G92 E0                         ; zero the extruder
  G1 E-10.0 F3600                ; retract filament
  
  G91                            ; relative positioning
  G0 Z1.00 X20.0 Y20.0 F20000    ; move nozzle to remove stringing
  TURN_OFF_HEATERS
  M107                           ; turn off fan
  G1 Z5 F3000                    ; move nozzle up 5mm
  G90                            ; absolute positioning
  G0  X175 Y350 F3600            ; park nozzle at rear
  BED_MESH_CLEAR
  
  # The purpose of the SAVE_GCODE_STATE/RESTORE_GCODE_STATE
  # command pair is to restore the printer's coordinate system
  # and speed settings since the commands above change them.
  # However, to prevent any accidental, unintentional toolhead
  # moves when restoring the state, explicitly set MOVE=0.
  SET_SKEW CLEAR=1
  RESTORE_GCODE_STATE NAME=STATE_PRINT_END MOVE=0

  # disable motors
  M84