Later patches will insert reader_list entries from other entry points.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Josh Triplett <josh@freedesktop.org>
This incantation is supposed to be a no-op on earlier automake versions.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Josh Triplett <josh@freedesktop.org>
It's possible to call xcb_wait_for_reply more than once for a single
request. In this case we are nice and let reply waiters continue so
that they can notice that the reply is not available
anymore. Otherwise an event waiter could just signal the reply waiter
that got its reply to continue but leave a waiter for an earlier reply
blocked.
Below is an example sequence for reproducing this problem.
thread #1 (XNextEvent)
- waits for events
thread #2 (XSync)
- executes request #2
- waits for reply #2
thread #1
- reads reply #2
- signals waiter of reply #2 to continue
- waits for events
thread #2
- handles reply #2
thread #3 (XCloseDisplay)
- executes request #3
- waits for reply #2
thread #1
- reads reply #3
- nobody is waiting for reply #3 so don't signal
- wait for events
Of course it may be questionable to wait for a reply twice, but XCB
should be smart enough to let clients continue if they choose to do
so.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Windows' file handles have never been small or consecutive, so Windows'
select has always been implemented the same way as everyone else's poll.
On Windows, FD_SETSIZE is the size of the poll array, not the maximum
SOCKET number.
Signed-off-by: Peter Harris <git@peter.is-a-geek.org>
If lots of requests are send without one causing a reply, xcb can get confused
about the current sequence number of a reply. Document the requirements of an
external socket owner to avoid this problem.
The return_socket callback for xcb_take_socket() originally was supposed to
return the last sequence number used, but the version committed to libxcb never
actually had this signature. This fixes the function's documentation not to
mention this non-existent return value.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Signed-off-by: Julien Danjou <julien@danjou.info>
If the initial get_peer_sock_name(getpeername ...) succeeds, the
pointer to allocated memory is overwritten by the later call to
get_peer_sock_name(getsockname ...). Fix that up by freeing
the allocated memory before overwriting the pointer.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Julien Danjou <julien@danjou.info>
If you discard a sequence number that has multiple responses already
read, this will do more allocations than necessary. But nobody cares
about ListFontsWithInfo.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
This simplifies the critical section of xcb_send_request and fixes a
couple of subtle bugs:
- It's possible for xcb_send_request to need to issue two sync requests
before it can issue the real request. Previously, we counted sequence
numbers as if both were issued, but only one went out on the wire.
- The test for whether to sync at 32-bit sequence number wrap has been
incorrect since we switched to 64-bit sequence numbers internally.
This change means that if the output queue was already full and the
current request is bigger than the output queue, XCB will do one more
write syscall than it did before. But syncs are rare and small requests
are the norm, so this shouldn't be a measurable difference.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
By calling memmove instead of memcpy, and walking the buffer backward
from the end, *_unserialize is safe to use in-place.
Signed-off-by: Peter Harris <pharris@opentext.com>
In support of this, consolidate the two static error_connection
definitions into one so we don't try to free the static out-of-memory
error_connection.
Commit by Josh Triplett and Jamey Sharp.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
If a client calls close(2) on the connection's file descriptor and then
flushes writes, libxcb causes a hang in the client.
Any flush eventually calls _xcb_out_send() with has the following loop:
while(ret && *count)
ret = _xcb_conn_wait(c, &c->out.cond, vector, count);
_xcb_conn_wait(), if built with USE_POLL, gets the POLLNVAL error. It only
checks for POLLIN and POLLOUT though, ignoring the error. Return value is 1,
count is unmodified, leaving us with an endless loop and a client hang.
XTS testcase Xlib3/XConnectionNumber triggers this bug. It creates a display
connection, closes its file descriptor, tries to send a no-op, and then expects
an error.
http://cgit.freedesktop.org/xorg/test/xts/tree/xts5/Xlib3/XConnectionNumber.m
If poll returned POLLHUP or POLLERR, we might see the same result.
If poll returns any event we didn't ask for, this patch causes
_xcb_conn_shutdown() to be invoked and an error returned. This matches the
behaviour if select(2) is used instead of poll(2): select(2) returns -1 and
EBADF for an already closed file descriptor.
I believe this fix both is safe and will handle any similar error. POSIX says
that the only bits poll is permitted to set in revents are those bits that were
set in events, plus POLLHUP, POLLERR, and POLLNVAL. So if we see any flags we
didn't ask for then something has gone wrong.
Patch inspired by earlier proposals from Peter Hutterer and Aaron
Plattner--thanks!
Reported-by: Peter Hutterer <peter.hutterer@who-t.net>
Reported-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Harris <pharris@opentext.com>
Fixes the X Test Suite's XCloseDisplay-6 test, which has this (admittedly
ridiculous) behavior:
1. Create a window w.
2. Open two display connections, dpy1, and dpy2.
3. Grab the server using dpy1.
4. Fork.
5 (child). XSetProperty on w using dpy2.
5 (parent). Verify that no event was recieved on dpy1.
6 (parent). XCloseDisplay(dpy1).
6 (child). Verify that an event was received on dpy2.
It was failing because at step 6 (child), the server had not actually ungrabbed
yet because the file descriptor for dpy1 was still open in the child process.
Shutting down the socket during XCloseDisplay matches the behavior of non-XCB
Xlib, which calls shutdown() from _X11TransSocketDisconnect.
Thanks to Julien Cristau for noticing this.
Signed-off-by: Aaron Plattner <aplattner at nvidia.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Peter Harris <pharris@opentext.com>
This fixes the test case I have so far for Havoc's report that
xcb_request_check hangs.
Rationale: Since we have a void cookie, request_expected can't have been
set equal to this sequence number when the request was sent; it can only
have become equal due to the arrival of an event or error. If it became
equal due to an event then we still need to sync. If it became equal due
to an error, then request_completed will have been updated, which means
we correctly won't sync.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29599
However, Havoc reports that he can still reproduce the problem, so we
may be revisiting this later.
Reported-by: Havoc Pennington <hp@pobox.com>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
- API compatibility with valueparam
- request _aux() auxiliary functions
- _serialize() and _unserialize() auxiliary functions
- new data type that allows mixing of fixed and variable size members
launchd: Explicitly search /sbin
Previously, launchd wasn't found if /sbin wasn't in the user's PATH.
https://bugs.freedesktop.org/show_bug.cgi?id=29028
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
I was surprised to see that xinput was not installed. Looking at
configure.ac, it seems that it is disabled by default. Maybe configure
should output the status of the different extensions.
Jamey Sharp
Rami Ylimäki
Jeremy Huddleston
Peter Harris
Vincent Torri
Jeetu Golani
Uli Schlachter
Nick Bowler
Josh Triplett
Aaron Plattner
Christoph Reimann
Julien Danjou
Eamon Walsh
Vincent Torri