xf86RotateCrtcRedisplay() is about to be used outside of xf86Rotate.c in
order to copy transformed pixmaps, so fix up its interface by specifying
the source drawable and destination pixmap rather than assuming the root
drawable and rotated pixmap, respectively. In addition, add an argument to
make xf86RotateCrtcRedisplay() not perform any transformations, which is an
indicator that it should only copy a transformed pixmap rather than
actually transform a pixmap.
These changes make it possible to use xf86RotateCrtcRedisplay() to not
only copy transformed pixmaps, but also actually transform pixmaps, making
it very useful outside of xf86Rotate.c.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
This was overlooked when converting the function to use libxcvt.
Bring back name initialization from old code.
This was causing a segfault in xf86LookupMode() if modes where
name is NULL are present the modePool list.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Quite a lot of applications currently expect the screen DPI exposed by
the X server to be 96 even when the real display DPI is different.
Additionally, currently Xwayland completely ignores any hardware
information and sets the DPI to 96. Accordingly the new behavior, even
if it fixes a bug, should not be enabled automatically to all users.
A better solution would be to make the default DPI stay as is and enable
the correct behavior with a command line option (maybe -dpi auto, or
similar). For now let's just revert the bug fix.
This reverts commit 05b3c681ea.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
The assumption in the upsampling code was that the crtc->gamma_size
size of the crtc's gamma table is a power of two. This is true for
almost all current driver + gpu combos at least on Linux, with typical
sizes of 256, 512, 1024 or 4096 slots.
However, Intel Gen-11 Icelake and later are outliers, as their gamma
table has 2^18 + 1 slots, very big and not a power of two!
Try to make upsampling behave at least reasonable: Replicate the
last gamma value to fill up remaining crtc->gamma_red/green/blue
slots, which would normally stay uninitialized. This is important,
because while the intel display driver does not actually use all
2^18+1 values passed as part of a GAMMA_LUT, it does need the
very last slot, which would not get initialized by the old code.
This should hopefully create reasonable behaviour with Icelake+
but is untested on the actual Intel hw due to lack of suitable
hw.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
If randrp->palette_size is zero, the memcpy() path can read past the
end of the randr_crtc's gammaRed/Green/Blue tables if the hw crtc's
gamma_size is greater than the randr_crtc's gammaSize.
Avoid this by clamping the to-be-copied size to the smaller of both
sizes.
Note that during regular server startup, the memcpy() path is only
taken initially twice, but then a suitable palette is created for
use during a session. Therefore during an actual running X-Session,
the xf86RandR12CrtcComputeGamma() will be used, which makes sure that
data is properly up- or down-sampled for mismatching source and
target crtc gamma sizes.
This should avoid reading past randr_crtc gamma memory for gpu's
with big crtc->gamma_size, e.g., AMD/MALI/KOMEDA 4096 slots, or
Intel Icelake and later with 262145 slots.
Tested against modesetting-ddx and amdgpu-ddx under screen color
depth 24 (8 bpc) and 30 (10 bpc) to make sure that clamping happens
properly.
This is an alternative fix for the one attempted in commit
617f591fc4.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
The xf86CVTMode() was implemented in a standalone source file because it
was being used for both the xfree86 API and the standalone cvt utility.
Now that the cvt utility is removed (as part of libxcvt) we can move the
small xf86CVTMode() function with the rest of the xf86Modes sources.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Replace the local implementation of the VESA CVT standard timing
modelines generator with the one from libxct to avoid code duplication.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Physical dimmension of display can be obtained not just by configuration or
DDC, but also directly from kernel via drmModeGetConnector(). Until now
xserver silently discarded these values even when no configuration nor EDID
were present and fallbacked to default DPI.
Commit 1e3f9ea1 removed some NULL checks from xf86RandR12.c, on the premise that
they can't be reached unless RandR has already been initialized. For threesuch
calls, that's not true:
xf86Crtc.c::xf86CrtcScreenInit():
if (c == config->num_crtc) {
xf86RandR12SetRotations(screen, RR_Rotate_0 | RR_Rotate_90 |
RR_Rotate_180 | RR_Rotate_270 |
RR_Reflect_X | RR_Reflect_Y);
xf86RandR12SetTransformSupport(screen, TRUE);
}
else {
xf86RandR12SetRotations(screen, RR_Rotate_0);
xf86RandR12SetTransformSupport(screen, FALSE);
}
xf86Crtc.c::xf86CrtcCloseScreen():
xf86RandR12CloseScreen(screen);
This change adds checks back to xf86RandR12Set{Rotations,TransformSupport}() and
xf86RandR12CloseScreen(), checking that xf86RandR12KeyRec has been registered.
Without this, X will hit an assert that causes it to abort.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
EDID1.4 replaced GTF Bit with Continuous or Non-Continuous Frequency Display.
Check the "Display Range Limits Descriptor" for GTF support.
If panel doesn't support GTF, then add gtf modes.
Otherwise X will only show the modes in "Detailed Timing Descriptor".
V2: Coding style changes.
V3: Coding style changes, remove unused variate.
V4: remove unused variate.
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/313
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Avoids a crash in xf86RotatePrepare -> DamageRegister during
CreateScreenResources if rotation or another transform is configured for
any connected RandR output in xorg.conf. The generic rotation/transform
code generally can't work without the root window currently.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/969
Fixes: 094f42cdfe "xfree86/modes: Call xf86RotateRedisplay from
xf86CrtcRotate"
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If a new rotate buffer was allocated. This makes sure the new buffer
has valid transformed contents when it starts being displayed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Slightly simplifies the callers since they don't need to check for
non-NULL anymore.
I do extremely hate the workarounds here to suppress misprite taking the
cursor down though. Surely there's a better way.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This fixes 'non-desktop' displays staying powered on after their lease
has been revoked.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111620
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
If the user sets Option "Enable" "TRUE" for a monitor, the X
server will connect the connector a crtc but tell the user it
is disconnected.
However the user in this case is mutter, when it gets it's view
of the output configuration it sees the output is disconnected
and never sets it up again, which seems like the right thing to do.
If we let the user enable a monitor, lets just set it as always
connected.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Normally, the X server infers the initial screen size based on any
connected outputs. However, if no outputs are connected, the X server
picks a default screen size of 1024 x 768. This option overrides the
default screen size to use when no outputs are connected. In contrast
to the "Virtual" Display SubSection entry, which applies unconditionally,
"NoOutputInitialSize" is only used if no outputs are detected when the
X server starts.
Parse this option in the new exported helper function
xf86AssignNoOutputInitialSize(), so that other XFree86 loadable drivers
can use it, even if they don't use xf86InitialConfiguration().
Signed-off-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
All of the null checks here are redundant, you can't get to those paths
unless RANDR's already been initialized. Delete them, and remove the
pointer too.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
If the driver calls xf86HandleColormaps, CMapChangeGamma updates the HW
gamma LUT of all CRTCs via xf86RandR12LoadPalette. However,
xf86RandR12ChangeGamma was then clobbering the gamma LUT of the RandR
1.2 compatibility output's CRTC with the gamma curves computed from the
screen's global gamma values.
Fix this by bailing if xf86RandR12LoadPalette is installed.
Fixes: 02ff0a5d7e "xf86RandR12: Fix XF86VidModeSetGamma triggering a
BadImplementation error"
The DIX crtc and output structures are freed when their resources are
destroyed, which happens before CloseScreen is called. As a result, we
know these pointers are invalid and referencing them during any of the
remaining CloseScreen sequence will be bad.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Cc: thellstrom@vmware.com
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
At startup, we want to ignore non-desktop monitors unless we don't
find any desktop monitors. Because there are no DIX RandR resources
allocated, let the driver store this information in a new field in the
xf86Output structure and then use that value to help decide whether to
include an output as part of the default configuration.
v2:
Suggested-by: Michel Dänzer <michel@daenzer.net>
Bump XF86_CRTC_VERSION from 7 to 8. This will let out-of-tree
drivers know whether this field is available.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
At screen depths > 24 bit, the color palettes passed into
xf86Randr12CrtcComputeGamma() can have a larger number of slots
than the crtc's hardware lut. E.g., at depth 30, 1024 palette
slots vs. 256 hw lut slots. This palette size > crtc gamma size
case is not handled yet and leads to silent failure, so gamma
table updates do not happen.
Add a new subsampling path for this case.
This makes lut updates work again, as tested with the xgamma
utility (uses XF86VidMode extension) and some RandR based
gamma ramp animation.
v2: Better resampling when subsampling the palette, as
proposed by Ville. Now reaches the max index of the
palette and deals with non-power-of-two sizes. Thanks.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk> (v1)
Cc: <ville.syrjala@linux.intel.com>
xf86PruneDuplicateModes is passed a linked list of modes, and after
pruning the duplicate nodes, the new head of the list is returned. If
the first element is removed, the head of the list will change and the
returned value needs to be assigned.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103722
Thanks: John Lumby <johnlumby@hotmail.com>
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The only way to get at xf86Info.disableRandR from configuration is
Option "RANDR" "foo" in ServerFlags, which probably nobody is using
seeing as it's not documented. The other way it could be set is if a
screen supports RANDR 1.2, in which case we set it to avoid trying to
use the RANDR 1.1 compat code. If the second screen is not 1.2-aware
then this would mean we don't do RANDR setup on the second screen at
all, which would almost certainly crash the first time you try to do
RANDR operations on the second screen.
Fix that all by deletion, and just check whether the screen already has
RANDR initialized before installing the stub support. If you want to
disable RANDR, use the Extensions section of xorg.conf instead.
v2: Also remove a now entirely pointless log message, telling you to
ignore a line we will no longer print.
v3: Explain the fallback path in InitOutput. (Keith Packard)
v4: Check whether the RANDR private key is initialized before trying to
use it to look up the screen private.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tsk. This broke vesa for me, the rrGetScrPriv in InitOutput will crash
if randr's screen private key hasn't been initialized yet. That seems
dumb, but let's not leave it broken.
This reverts commit c08d7c1cdd.
The only way to get at xf86Info.disableRandR from configuration is
Option "RANDR" "foo" in ServerFlags, which probably nobody is using
seeing as it's not documented. The other way it could be set is if a
screen supports RANDR 1.2, in which case we set it to avoid trying to
use the RANDR 1.1 compat code. If the second screen is not 1.2-aware
then this would mean we don't do RANDR setup on the second screen at
all, which would almost certainly crash the first time you try to do
RANDR operations on the second screen.
Fix that all by deletion, and just check whether the screen already has
RANDR initialized before installing the stub support. If you want to
disable RANDR, use the Extensions section of xorg.conf instead.
v2: Also remove a now entirely pointless log message, telling you to
ignore a line we will no longer print.
v3: Explain the fallback path in InitOutput. (Keith Packard)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This makes sure the CRTC's cursor is hidden before we hand the CRTC
over to some other application.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Avoid adding a "standard" mode timing if we've already got a matching
detailed timing. To help with that, parse CEA blocks for detailed
timings before doing standard or established timings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The CEA extension short video descriptors contain the VIC, which starts
at 1, not 0.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Roundhouse kick replacing the various (sizeof(foo)/sizeof(foo[0])) with
the ARRAY_SIZE macro from dix.h when possible. A semantic patch for
coccinelle has been used first. Additionally, a few macros have been
inlined as they had only one or two users.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Spotted by Appveyor:
xf86Crtc.c:3281:1: warning: ‘xf86_crtc_box_area’ defined but not used [-Wunused-function]
xf86_crtc_box_area(BoxPtr box)
^~~~~~~~~~~~~~~~~~
xf86Crtc.c:3268:1: warning: ‘x86_crtc_box’ defined but not used [-Wunused-function]
x86_crtc_box(xf86CrtcPtr crtc, BoxPtr crtc_box)
^~~~~~~~~~~~
xf86Crtc.c:3256:1: warning: ‘x86_crtc_box_intersect’ defined but not used [-Wunused-function]
x86_crtc_box_intersect(BoxPtr dest, BoxPtr a, BoxPtr b)
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
When the default behaviour was changed from clone mode to horizontal
extended layout, a boolean ScrnInfoRec member preferClone was introduced
to choose the old default behaviour. Option "PreferCloneMode" allows
setting this preferClone member.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
E.g. because Xinerama is enabled.
Fixes crash on startup and wrong colours in that case.
Bugzilla: https://bugs.freedesktop.org/100293
Bugzilla: https://bugs.freedesktop.org/100294
Fixes: 62f4405257 ("xfree86/modes: Move gamma initialization to
xf86RandR12Init12 v2")
Tested-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The X Server never generates a global config.h, and instead all these
paths are including dix-config.h or xorg-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Multiple calls to xf86EdidMonitorSet (which can be triggered e.g. by
running xrandr) would potentially keep adding the same modes, causing
the Monitor->Modes list to keep growing larger and using up more memory.
Fix this by calling xf86PruneDuplicateModes after adding the modes
returned by xf86DDCGetModes. This makes sure there's only one instance
of each unique mode in the list.
v2:
* Replace semicolon with {} for empty for loop (Emil Velikov)
* Slightly tweak commit log to avoid minor inaccuracy about what
xf86PruneDuplicateModes does
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99521
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Based on v4 by Alexandre Courbot <acourbot@nvidia.com>
There is currently no reliable way to report failure to set a HW
cursor. Still such failures can happen if e.g. the MODE_CURSOR DRM
ioctl fails (which currently happens at least with modesetting on Tegra
for format incompatibility reasons).
As failures are currently handled by setting the HW cursor size to
(0,0), the fallback to SW cursor will not happen until the next time the
cursor changes and xf86CursorSetCursor() is called again. In the
meantime, the cursor will be invisible to the user.
This patch addresses that by adding _xf86CrtcFuncs::set_cursor_check and
_xf86CursorInfoRec::ShowCursorCheck hook variants that return booleans.
This allows to propagate errors up to xf86CursorSetCursor(), which can
then fall back to using the SW cursor immediately.
v5: Updated the patch to apply to current git HEAD, split up into two
patches (server and modesetting driver) and adjusted the code slightly
to match surrounding code. I also removed the new exported function
ShowCursorCheck(), as instead just changing ShowCursor() to return Bool
should not affect its current callers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Detailed mode reports 108 mm x 68 mm which is for smaller display.
Maximum image size reports 15 cm x 10 cm which aligns with its physical
size, use this size instead.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Commit b4e46c0444 ("xfree86: Hook up colormaps and RandR 1.2 gamma code")
dropped the providing of a pScrn->ChangeGamma callback from the xf86RandR12
code. Leaving pScrn->ChangeGamma NULL in most cases.
This triggers the BadImplementation error in xf86ChangeGamma() :
if (pScrn->ChangeGamma)
return (*pScrn->ChangeGamma) (pScrn, gamma);
return BadImplementation;
Which causes X-apps using XF86VidModeSetGamma to crash with a
X protocol error.
This commit fixes this by re-introducing the xf86RandR12ChangeGamma
helper removed by the commit and adjusting it to work with the new
combined palette / gamma code.
Fixes: b4e46c0444 ("xfree86: Hook up colormaps and RandR 1.2 gamma code")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is a preparation patch to allow easier usage of init_one_component
outside of xf86RandR12CrtcInitGamma.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes XRRGetOutputPrimary and xrandr not reporting a primary output after
startup. This was especially confusing when an output was explicitly
marked as primary using Option "Primary" in Section "Monitor".
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When a slave-output is rotated the transformation is done on the blit
from master to slave GPU, so crtc->transform_in_use is not set, but we
still need to adjust the mouse position for things to work.
This commit modifies xf86_crtc_transform_cursor_position to not rely
on crtc->f_framebuffer_to_crtc, so that it can be used with GPU screens
too and always calls it for crtcs with any form of rotation.
Note not using crtc->f_framebuffer_to_crtc means that crtc->transform
will not be taken into account, that is ok, because when we've a transform
active hw-cursors are not used and xf86_crtc_transform_cursor_position
will never get called.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
xf86_crtc_rotate_coord should be the exact inverse operation of
xf86_crtc_rotate_coord_back, but when calculating x / y for 90 / 270
degrees rotation it was using height to calculate x / width to calculate y,
instead of the otherway around.
This was likely not noticed before since xf86_crtc_rotate_coord
until now was only used with cursor_info->MaxWidth and
cursor_info->MaxHeight, which are usally the same.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Sultan Alsawaf
Matthieu Herrb
Povilas Kanapickas
Matthieu Herrb
Mario Kleiner
Olivier Fourdan
Daniel Strnad
Alex Goins
Dave Airlie
Alan Coopersmith
Aaron Ma
Michel Dänzer
Adam Jackson
Andres Rodriguez
Andy Ritger
Michel Dänzer
Keith Packard
Jeff Smith
Hector Martin
Daniel Martin
Eric Anholt
Michael Thayer
Kai-Heng Feng
Hans de Goede