By default, Xwayland (as any Wayland client) uses the keymap set by the
Wayland compositor using the standard Wayland protocol.
There are some specific uses cases where a user would want to let the
X11 clients control the keymap. However, the Wayland compositor may
(re)send the keymap at any time, overriding whatever change was made
using the X11 mechanisms.
Add a new "-nokeymap" option to Xwayland to instruct Xwayland to simply
ignore the standard Wayland mechanism to set the keymap, hence leaving
the control entirely to the X11 clients.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a output name to the xwl_screen.
This is preparation work for fullscreen rootful on a specific output,
no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
This replaces int glamor parameter with a new enum to be more clean
and prepare for more glamor options.
No functional change.
Signed-off-by: Konstantin <ria.freelander@gmail.com>
With EI support wired to XTEST, and oeffis being enabled unconditionally
means that Xwayland will always go through the XDG portal for XTEST when
supported.
While this the intended behavior for the general use case of Xwayland
running rootless on a desktop compositor, that breaks when Xwayland is
running on a nested compositor, because the portal is for the entire
session and not limited to the nested Wayland compositor.
Xwayland itself, as a regular Wayland client, has no way to tell that it
is running on a nested compositor.
So to keep backward compatibility with existing (and also common) use
cases such as nested compositors, best is to disable support for the XDG
portal by default, and add a new command line option "-enable-ei-portal"
for the Wayland compositors (who spawn Xwayland rootless) to explicitly
enable support for the input emulation XDG portal in Xwayland.
A Wayland compositor running nested should not use that command line
option with Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Fixes: a1333342 - xwayland: Add XTEST support using EIS
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1586
See-also: https://gitlab.gnome.org/GNOME/mutter/-/issues/3047
glamor ensures that a depth 32 pixmap backing a depth 24 window contains
fully opaque alpha channel values for the window's pixels, so we can
allow this without implicit redirection, saving pixmap storage and
intermediate copies.
Second attempt, after fixing a few regressions from the first attempt.
glamor ensures that a depth 32 pixmap backing a depth 24 window contains
fully opaque alpha channel values for the window's pixels, so we can
allow this without implicit redirection, saving pixmap storage and
intermediate copies.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Sort protocol #includes lexically.
* memcpy to &xwl_feedback->main_dev directly in
xwl_dmabuf_feedback_main_device. ]
Implements the xwayland_shell protocol which makes the surface
association happen via a shared serial, rather than sharing a wl_surface
resource ID across an X atom.
This solves a race that can happen if the wl_surface
associated with a WL_SURFACE_ID for a window was destroyed before the
update of the atom was processed by the compositor and another surface
(or other object) had taken its id due to recycling.
Closes: #1157
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
X11 and Wayland requests are unordered, causing a race in the X11 window
and wl_surface association.
To mitigate that race, delay the wl_surface destruction by 1 second,
so that the compositor has time to establish the association before the
wl_surface is destroyed: to see both the wl_surface created and the
WL_SURFACE_ID X11 property set.
This is only a mitigation though, a more robust solution requires a
future dedicated Wayland protocol.
v2: Clean up pending wl_surface destroy on exit as well.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1157
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Joshua Ashton <joshua@froggi.es>
Tested-by: Sterophonick <sterophonick@gmail.com>
See-also: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/163
Because of the design of most Wayland compositors, where the compositor
is both a Wayland server and an X11 window manager, any X11 client
issuing a server grab (i.e. XGrabServer()) can possibly hang the whole
desktop when Xwayland is running rootless.
This can happen with e.g. ImageMagick's import command with mutter.
1. "import" is launched and issues an XServerGrab(),
2. Xwayland restricts access to that "import" X11 client alone,
3. mutter continues to process events until it needs to sync with
Xwayland (there's variability in time before the hang occurs),
4. When mutter does an XSync() (explicitly or implicitly through some
other Xlib call), it will stop waiting for Xwayland to reply,
5. Xwayland waits for the XServerGrab() to be released by import,
6. "import" waits for a user input to release the XServerGrab(),
7. mutter is stuck waiting on Xwayland and does not process input
events...
To prevent this, re-route the GrabServer/UngrabServer requests and
pretend the grab works but actually does nothing at all for all clients
but the X11 window manager (which can still issue X11 server grabs, at
its own risks).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Closes: https://bugzilla.redhat.com/1914021
When running rootful, the Xwayland window is not decorated (as all
Wayland surfaces), which makes it quite inconvenient to move on screen.
libdecor is "a client-side decorations library for Wayland clients"
which can be used precisely for adding decorations to Wayland surfaces.
Add optional support for libdecor in Xwayland to gain decorations when
running rootful and a new command line option "-decorate".
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1332
Add a new command line option "-host-grab" to disable the keyboard
shortcuts and confine the pointer on the host so that Xwayland can
receive all keyboard events.
This is useful when running a complete desktop environment within
Xwayland rootful.
Use [CTRL]+[SHIFT] to release the keyboard and pointer.
This option is not compatible with rootless mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a new command line option "-fullscreen" to make the rootful Xwayland
window appear fullscreen.
This requires viewport support in the compositor and when used with
"-geometry" can emulate the full range of XRandR resolutions.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When running rootless as well as rootful, Xwayland gets its outputs
configuration from the Wayland compositor.
When running rootful, it means that we end up with a large black
surface the size of all monitors combined, that's not very convenient
and there is no way for set the desired size of the Xwayland window.
Add a new command line option "-geometry" to force a specific mode when
running rootful for the user to specify the root window size to use for
Xwayland.
That option has no effect when Xwayland is running rootless.
v2: Not using libxcvt as the mode may not be a valid CVT mode.
v3: Add a set of XRandR modes and the RR hooks to make that work.
Update the man page for Xwayland.
v4: Add RandR 1.0 support for older clients
v5: Fix XVidMode failing with a BadMatch
v6: Add a separate xwl_output specifically for fixed mode, instead of
using the existing output list - that will allow for further
improvements like a fullscreen mode eventually.
v7: Sort the RR modes
v8: Fix RandR 1.0
v9: Add physical size
v10: Cleanup
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1338
Xwayland uses an output serial number it increments each time a new
Wayland output is added.
On server regeneration, that static value is not cleared, and therfore
the output numbers keep increasing each time the Xserver restarts.
To avoid that issue, make the output serial part of the xwl_screen,
which gets recreated on server regeneration, so that index is reset to 0
automatically on server regeneration.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds a -force-xrandr-emulation cmdline switch that always exposes extra
modes when viewporter isn't exposed by the Wayland compositor.
Having the additional modes exposed by the X server is important for
games to function and be configured
Compositors, such as Gamescope (the compositor for Steam Deck),
support only a single window that is rendered in the centre of the
screen that is scaled up to fill the screen by the compositor based
on some user scaling settings.
Exposing viewporter, wouldn't make sense here, and could mislead native
Wayland clients, so exposing dummy modesets in X is preferred here.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This commit allows X11 clients running through Xwayland to lease
non-desktop connectors from the Wayland compositor by implementing
support for drm-lease-v1.
In order to not deadlock with the Wayland compositor if its response
to a lease request is delayed, the new interface in _rrScrPriv
introduced in the last commit is used, which makes it possible to
block the X11 client while a response is pending.
Leasing normal outputs is not yet supported, all connectors offered
for lease will be advertised as non-desktop.
Co-authored-by: Xaver Hugl <xaver.hugl@gmail.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
The implementation is relatively straightforward because both wayland
and Xorg use libinput semantics for touchpad gestures.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
If Xwayland's EGLstream backend supports hardware acceleration with the
NVIDIA closed-source driver, the GLX library also needs to be one
shipped by NVIDIA, that's what GLVND is for.
Add a new member to the xwl_screen that the backend can optionally set
to the preferred GLVND vendor to use.
If not set, "mesa" is assumed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This is preliminary work for hardware accelerated rendering with the
NVIDIA driver.
The EGLStream backend can possibly also use the dmabuf interface, so
move the relevant code from the GBM specific source to the common bits.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Mutter recently added headless tests, and when running those tests the
Wayland compositor runs for a very short time.
Xwayland is spawned by the Wayland compositor and upon startup will
query the various Wayland protocol supported by the compositor.
To do so, it will do a roundtrip to the Wayland server waiting for
events it expects.
If the Wayland compositor terminates before Xwayland has got the replies
it expects, it will loop indefinitely calling `wl_display_roundtrip()`
continuously.
To avoid that issue, add a new `xwl_screen_roundtrip()` that checks for
the returned value from `wl_display_roundtrip()` and fails if it is
negative.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Recently, rooted Xwayland crashes on wlroots-based compositors, because
wlroots removed the deprecated wl_shell protocol.
This MR fixes this by changing the code in question to the xdg-shell
protocol. My motivation do this: on etnaviv-based embedded platforms,
rooted Xwayland is much faster and doesn't cause UI rendering bugs
compared to rootless Xwayland.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
Not only hook the ResizeWindow method of the screen (which really is
MoveAndResize) but also hook the MoveWindow method for checking if we
need to setup a viewport for resolution change emulation.
Our resolution change emulation check if the windows origin matches
the monitors origin and the windows origin can also be changed by just
a move without being resized.
Also checking on a move becomes esp. important when we move to checking
on changes to the top-level non-window-manager client (X11)Window instead
of on changes to the xwl_window later on in this patch series.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of iterating over all clients which are listening for events on the
root window and checking if the client we are dealing with is the one
listening for SubstructureRedirectMask | ResizeRedirectMask events and thus
is the window-manager, cache the client-id of the window-manager in
xwl_screen and use that when checking if a client is the window-manager.
Note that we cache and compare the client-id rather then the ClienPtr,
this saves reading the ClientPtr from the global clients array when doing
the comparison.
Suggested-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move Xwayland screen related code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Olivier Fourdan
Konstantin
Michel Dänzer
Xaver Hugl
Austin Shafer
Joshua Ashton
Drew DeVault
Povilas Kanapickas
mntmn
Hans de Goede