It had nothing left in it that was used but wasn't in dix-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
ajax deleted the evdev driver in the removal of fbdev and the linux
backend.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
There is no pixmap associated with source-only pictures.
Fixes Xephyr -fakexa crashing on startup.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This ends up passing 0 as the bpp argument to fb screen setup, which is
not really the best plan.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the screen pixmap or the corresponding texture creation with glamor
fails, exit cleanly with an error message instead of segfaulting.
Fixes: https://bugzilla.redhat.com/1431633
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
If we're never painting anything in the window, we probably don't need
to map it.
v2: Drop ephyr_glamor_gles2 from hostx.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Useless as an XVideo implementation with zero adaptors might be, it's
apparently a thing in the wild. Catch this case and bail out of xv init
if it happens.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This speeds up headless testing of Xephyr -glamor with softpipe from
"a test per minute or so" to "a test every few seconds".
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
With no users of the interface needing the readmask anymore, we can
remove it from the argument passed to these functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Delay expose or configure processing until the event queue is empty so
that we don't end up processing a long series of events one at a
time. Expose events already have a check waiting for the last in a
series, this further improves that by discarding multiple
series of events.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If we end up reading all pending X events in the course of other server
execution, then our notify FD callback won't get invoked and we won't
process them. Fix this by noting that there are queued events in the
block handler, setting the poll timeout to zero and queuing a work
proc to clear the event queue.
v2: use a work proc to clear the event queue rather than doing it in
the block handler directly.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Under glamor, we need to re-create the screen pixmap at the new size
so that we can ask glamor for the associated texture. Fortunately, we
can simply use ephyr_glamor_create_screen_resources to create the new
pixmap.
Because this is being done after the server has started, we need to
walk the window heirarchy and reset any windows pointing at the old
pixmap. I could easily be convinced that this TraverseTree should be
moved to miSetScreenPixmap.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The screen block and wakeup handlers are the only ones which provide a
well known ordering between the wrapping layers; placing these as
close as possible to the server blocking provides a way for the driver
to control the flow of execution correctly.
Switch the shadow code to run in the screen block handler so that it
now occurrs just before the server goes to sleep.
Switch glamor to call down to the driver after it has executed its own
block handler piece, in case the driver needs to perform additional
flushing work after glamor has called glFlush.
These changes ensure that the following modules update the screen in
the correct order:
animated cursors (uses RegisterBlockAndWakeupHandlers dynamically)
composite (dynamic wrapping)
misprite (dynamic wrapping)
shadow (static wrapping)
glamor (static wrapping)
driver (static wrapping)
It looks like there's still a bit of confusion between composite and
misprite; if composite updates after misprite, then it's possible
you'd exit the block handler chain with the cursor left hidden. To fix
that, misprite should be wrapping during ScreenInit time and not
unwrapping. And composite might as well join in that fun, just to make
things consistent.
[v2] Unwrap BlockHandler in shadowCloseScreen (ajax)
[v3] ephyr: Use screen block handler for flushing changes
ephyr needs to make sure it calls glXSwapBuffers after glamor finishes
its rendering. As the screen block handler is now called last, we have
to use that instead of a registered block/wakeup handler to make sure
the GL rendering is done before we copy it to the front buffer.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
As the man page for the latter states:
The effects of signal() in a multithreaded process are unspecified.
We already have an interface to call sigaction() instead, use it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently Xephyr doesn't inherit host X server's keymap, which
may lead to keymap mismatches when using a non-US keyboard in a
window inside Xephyr. This patch makes Xephyr change its keymap
to match host X server's one (unless XKB support is disabled),
using xcb-xkb to retrieve the needed XKB controls.
This implementation is analogous to Xnest one at commit 83fef4235.
Supersedes: https://patchwork.freedesktop.org/patch/67504
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
Option -seat passed to Xephyr requires -sw-cursor to be passed as well,
otherwise the mouse cursor will remain invisible for the given seat.
This patch takes care of enabling -sw-cursor if -seat is passed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
When used for single-GPU multi-seat purposes, there's no need to enable
ephyr virtual input devices, since Xephyr is supposed to handle its own
hardware devices.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
Multi-seat-capable display managers commonly pass command-line options
like "-novtswitch", "-sharevts", or "-layout seatXXXX" to Xorg server,
but Xephyr currently refuses to start if these options are passed to it,
which may break Xephyr-based single-GPU multiseat setups.
[ajax: shortened summary]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
This should fix aborts()s from epoxy on old software stacks.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This only worked if the backend server supported DRI1, which is
stunningly unlikely these days.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
On desktop GL, ask for a 3.1 core profile context if that's available,
otherwise create a generic context.
v2: tell glamor the profile is a core one.
v2.1: add/use GL version defines
v3: let glamor work out core itself
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Core contexts require the use of vertex array objects, so switch both glamor
and ephyr/glamor over.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Eliminates polling every 20ms for device input.
v2: rename ephyrPoll to ephyrXcbNotify and fix the API so it can be
used directly for SetNotifyFd. Thanks to Daniel Martin
<consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Cc: Daniel Martin <consume.noise@gmail.com>
There's nothing in configure to enable this, and KdTsPhyScreen isn't
defined anywhere.
[ajax: Rebase, also clean up Xfbdev]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
This improves the case for when we paint an area without SHM.
xcb_image_subimage() is used to create a subimage for the damaged area, which
is converted to native format if necessary.
Signed-off-by: Ian Scott <ian.scott@arteris.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
This is a trivial patch that moves host_has_extension() implementation
from ephyr.c to hostx.c so that it can be called by hostx.c internal
functions. Also rename function to hostx_has_extension() for consistency.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
xorg/xserver/hw/kdrive/ephyr/ephyr.c:979:9: error: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘ScreenPtr’ [-Werror=format=]
This looks like a genuine bug, and ephyrCursorScreen->myNum was meant here
rather than ephyrCursorScreen
v2:
Insert a ":" as well
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
I doubt anyone builds with this turned off or has done for a long
time.
It helps my eyes bleed slightly less when reading the code, I've left
the define in place as some drivers use it.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The image is created in the native byte order of the machine Xephyr is
rendered on however drawn in the image byte order of the Xephyr server.
Correct byte order in the xcb_image_t structure and convert to native
before updating the window.
If depths of Xephyr and host server differ this is already taken care of
by the depth conversion routine.
It is a terrible wase to always convert and transmit the entire image
no matter of the size of the damaged area. One should probably use
sub-images here. For now we leave this as an exercise.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xcb_image_put() prints the entire image, therefore don't use an offset.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The DDX specific command line parsing function only gets called
if command line arguments are present. Therefore this function
is not suitable to initialize mandatory global variables.
Replace main() instead.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ephyr_glamor_connect() returns NULL if we failed, but applying
xcb_connection_has_error() to NULL is not permitted.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
By dropping the unconditional logic op disable at the end of
rendering, this fixes GL errors being thrown in GLES2 contexts (which
don't have logic ops). On desktop, this also means a little less
overhead per draw call from taking one less trip through the
glEnable/glDisable switch statement of doom in Mesa.
The exchange here is that we end up taking a trip through it in the
XV, Render, and gradient-generation paths. If the glEnable() is
actually costly, we should probably cache our logic op state in our
screen, since there's no way the GL could make that switch statement
as cheap as the caller caching it would be.
v2: Don't forget to set the logic op in Xephyr's drawing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Remove these defines as we start to remove support for non-standard
glamor layering as used by the intel driver.
v2: Rebase on the blockhandler change and the Xephyr init failure
change (by anholt), fix stray NO_DRI3 addition to xwayland.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
In Xnest or Xephyr, pressing CapsLock when focus is on another
window does not update the state in the nested X server.
This is because when synchronizing the lock modifier, sending a
keypress or a key release only is not sufficient to toggle the state,
unlike regular modifiers, one has to emulate a full press/release
to lock or unlock the modifier.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xephyr's pseudocolor emulation added in:
commit 81a3b6fe27
Author: Matthew Allum <breakfast@10.am>
Date: Mon Nov 8 22:39:47 2004 +0000
Add support to Xephyr for lower depths than hosts
only tracks one global colormap for the whole (Xephyr) display. Move
this to per-screen state so each screen's colormap can be correct.
[ajax: rebased to 1.17, cleaned up commit message]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michele Baldessari <michele@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch makes it possible to use C-S key combinations
within Xephyr without losing access to the host window manager's
commands.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
A careful read shows that it was always NULL. It hasn't always been; as
the DDX spec indicates, it was the "occluded region that has backing
store", but since that backing store code is long gone, we can nuke it.
mi{,Overlay}WindowExposures get slightly simpler here, and will get even
simpler in just a moment.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When dix hands us a new cursor we proxy it through to the host server;
since we keep the host XID on the cursor bits private we can switch
among them with just ChangeWindowAttributes.
v2:
Use xcb-renderutil for argb format lookup (Uli, Keith)
Fall back to core cursors for host RENDER < 0.5 (Keith)
Drop useless ephyrEnableCursor
Consistently create/destroy the cursor image GC on both paths
Treat null cursor from dix as invisible
v3:
Initialize the invisible cursor's image (Keith)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If a given output is passed via new -output option, Xephyr will query
host X server for its info. If the following conditions are met:
a. RandR extension is enabled in host X server;
b. supported RandR version in host X server is 1.2 or newer;
c. the given output name is valid;
d. the given output is connected;
then Xephyr will get output's CRTC geometry and use it to set its own
screen size and origin. It's just like starting Xephyr in fullscreen mode,
but restricted to the given output's CRTC geometry (fake "Zaphod mode").
This is the main feature needed for Xephyr-based single-card multiseat
setups where we don't have separate screens to start Xephyr in fullscreen
mode safely.
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
With this patch, one can launch Xephyr with option "-screen WxH+X+Y"
to place its window origin at (X,Y). This patch relies on a previous
one that extends kdrive -screen option syntax to parse +X+Y substring
as expected.
If +X+Y is not passed in -screen argument string, let the WM place
the window for us, as before.
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
All users of glamor had the same value set, and it complicated things
for no reason.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The usual mechanism for freeing a damage structure when the pixmap is
destroyed does not work for the screen pixmap as it isn't freed in the
normal way.
The existing driver cleanup function, scrfini, is called after the
wrapped CloseScreen functions, including damageCloseScreen, are called
and thus ephyr can't free the damage structure at that point.
Deal with this by providing an early CloseScreen hook in KdCloseScreen
which ephyr can use to free the damage structure before damage itself
shuts down.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This should be useful for glamor development, so you can test both
paths (which are significantly different, and apparently
glamor_gradient.c was broken on GLES2 as of the import).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The difference between the two is that XF86 has the clip helper that
lets you upload less data when rendering video that's clipped. I
don't think that's really worth the trouble, especially in a world of
compositors, so I've dropped it to get to shared code.
It turns out the clipping code was broken on xf86-video-intel anyway.
To reproduce, run without a compositor, and use another window to clip
the top half of your XV output on the glamor XV adaptor: the rendering
got confused about which half of the window was being drawn to.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Now that we don't have to worry about the generic adaptors code,
there's no need to have a list of pointers to different sets of
adaptors.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
glx will sometimes select a non-root visual, deal with that by
creating a suitable colormap and using that instead of attempting to
use the default colormap.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This reverts commit b5a61239e2.
Not only did I screw up and introduce a warning, it turns out
glXChooseFBConfig() explicitly ignores this attribute. Thanks, GLX.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
The XResizeWindow call wasn't replaced by the xcb equivalent, so we
were no longer setting the initial window size, only wm size hints.
Regression from commit a2b73da "Xephyr: start converting hostx.c over to
xcb"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74849
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reported-by: Laércio de Sousa <lbsousajr@gmail.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Glamor has a mode where pixmaps will be constructed from numerous
small FBOs. This allows testing of the tiled pixmap code without
needing to create huge pixmaps.
However, the render glyph code assumed that it could create a pixmap
large enough for the glyph atlas. Instead of attempting to fix that
(which would be disruptive and not helpful), I've added a new pixmap
creation usage, GLAMOR_CREATE_NO_LARGE which forces allocation of a
single large FBO.
Now that we have pixmaps with varying FBO sizes, I then went around
and fixed the few places using the global FBO max size and replaced
that with the per-pixmap FBO tiling sizes, which were already present
in each large pixmap.
Xephyr has been changed to pass GLAMOR_CREATE_NO_LARGE when it creates
the screen pixmap as it doesn't want to deal with tiling either.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Looping around LoadExtension() meant that ExtensionModuleList was reallocated
on every extension. Using LoadExtensionList() we pass an array thus the
function can do the reallocation in one go, and then loop and setup the
ExtensionModuleList.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
v2: Update ephyr [Keith Packard]
v3: Eliminate const warnings in LoadExtensionList [Keith Packard]
Signed-off-by: Keith Packard <keithp@keithp.com>
This hasn't actually been a problem, since the server hasn't allocated
any glyphs before our glyph private initialization during
CreateScreenResources. But it's generally not X Server style to do
things this way.
Now that glamor itself drives both parts of glyphs setup, DDX drivers
no longer need to tell glamor to initialize glyphs. We do retain the
old public symbol so they can keep running with no changes.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Markus Wick <markus@selfnet.de>
Fixes misrendering with cairogears. I had noticed the failure while
trying to figure out what was going on with traps. Cairogears was
apparently putting its results on the screen through putimage, which
is a texture upload, so the last GL drawing was done to the size of
the cairogears window, not the size of the xephyr screen.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
It broke after commit 9fe052d90c
"xephyr: Build support for rendering with glamor using a -glamor
option."
See http://tinderbox.x.org/builds/2014-03-07-0004/logs/xserver/#build
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is the same thing that Qt ended up doing to get DRI2's event
mangling to happen despite using an XCB event loop.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: Avoid making the Ximage for the screen that we'll never use, and
drive the screen pixmap creation for glamor ourselves.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com> (v1)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Any time the colormap is changed, the entire screen needs to be
repainted to match.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
I'm not sure why ephyr thinks that ddxUseMsg shouldn't return, but
it's not declared to exit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xephyr wants ctrl+shift to grab the window, but that conflicts with
ctrl+alt+shift key combos. Remember the modifier state on key presses and
releases, if mod1 is pressed, we need ctrl, shift and mod1 released
before we allow a shift-ctrl grab activation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c: In function ‘ephyrProcessMouseMotion’:
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c:946:188: error: ‘ephyrCurScreen’ undeclared (first use in this function)
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c: In function ‘ephyrProcessButtonPress’:
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c:980:186: error: ‘ephyrCurScreen’ undeclared (first use in this function)
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c: In function ‘ephyrProcessButtonRelease’:
/jhbuild/checkout/xorg/xserver/hw/kdrive/ephyr/ephyr.c:1007:186: error: ‘ephyrCurScreen’ undeclared (first use in this function)
Fix ephyr compilation when ./configure'd with --enable-debug after commit
46cf6bf569, some instances of ephyrCurScreen were
not converted to screen->pScreen->myNum.
v2: Don't use a trivial local variable which will be unused when ./configure'd
with --disable-debug
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
A multi-head Xephyr instance has the pointer stuck on one screen
because of bad coordinate calculation. The coordinates passed to
GetPointerEvents are per-screen, so the cursor gets stuck on the left-most
screen by default.
Adjust and mark the events as POINTER_DESKTOP, so the DIX
can adjust them accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The fb layer of X can't deal with strides that are not a multiple of
4, so when Xephyr allocates its own framebuffer it should make sure to
align it.
This fixes crashes and rendering corruption when Xephyr runs in a
depth that is different from the host X server and its screen size is
not a multiple of 4 / depth. (This is particularly easy to trigger if
you use the -resizeable option).
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When the depth of the Xephyr server matches that of the host X server,
Xephyr simply uses the buffer associated with the XImage as its
framebuffer. In this case, it is correct to get the bits_per_pixel and
bytes_per_line values returned from hostx_screen_init() from the XImage.
However, when the depth doesn't match the host, Xephyr uses a private
framebuffer that is periodically copied to the XImage. In this case,
the returned values of bits_per_pixel and bytes_per_line should be
those of the private framebuffer, not those of the XImage.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
KdScreenInfo is constructed at server startup time, and not
re-generated at server reset time. Freeing the 'driver' element at
reset time means this information is lost, and the server crashes
pretty quickly afterwards.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=69388
Commit c100211034 (dix: only show the cursor
if a window defines one (#58398)) broke the default cursor behaviour in
Xephyr (unless run with -retro). Restore the default cursor visibility
so that '-retro' or '-host-cursor' are not needed to have a visible
cursor.
Signed-off-by: Michele Baldessari <michele@acksyn.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
as of ba387cf21f "ephyr: Use host (HW) cursors
by default." this only applies if -sw-cursor is given on the cmdline.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When DEBUG is enabled Xephyr compilation fails:
ephyrdriext.c:343:133: error: 'is_ok' undeclared (first use in this
function)
EPHYR_LOG("leave. is_ok:%d\n", is_ok);
Just reemove bogus is_ok variable.
Signed-off-by: Michele Baldessari <michele@acksyn.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no reason not to, and it simplifies quite a few callers.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
No DDX overrode this, and we never actually called through that slot
anyway.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Like commit ac1a60e7b6, re-add
initialization of GLX after it was accidentally dropped from non-Xorg
servers in 5f5bbbe543.
Signed-off-by: Sebastien Bacher <seb128@ubuntu.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62346
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Given that the window title says "ctrl+shift", having pressing those
keys in that order not ungrab you is fairly mean.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Otherwise when you're doing the ctrl-shift mouse grab thing, you
don't know what state you're in until the next rendering occurs.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Unless you're working on the sw cursor rendering code, you surely want
to have real hardware cursors.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Eric Anholt
Michel Dänzer
Adam Jackson
Olivier Fourdan
Keith Packard
Laércio de Sousa
Dave Airlie
Jamey Sharp
Ian Scott
Jürg Billeter
Jon TURNEY
Egbert Eich
Egbert Eich
Alan Coopersmith
Michele Baldessari
Peter Hutterer
William ML Leslie
Julien Cristau
Gaetan Nadon
Emil Velikov
Søren Sandmann Pedersen
Michele Baldessari
Laurent Carlier
Sebastien Bacher