Return errors instead of silently ignoring them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This widens almost all of the float-using code in ptrveloc.[ch] to
doubles, other than values coming from properties which are specified to
be floats by the property API.
Bumps input API to v14 as this changes the AccelScheme signature, as
used by xf86-input-synaptics.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Recent changes to the server change the default absolute input device
behaviour on zaphods to span the whole desktop too. Since these setups
usually use an xorg.conf, allow the transformation matrix to be specified in
the config as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
In all cases, the pointer was simply type-cast anyway. Let's get some
compile-time type safety going, how about that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Squashed in:
xfree86: Move definition of xf86OptionPtr into separate header file
The pile of spaghettis that is the xfree86 include dependencies make it
rather hard to have a single typedef somewhere that's not interfering with
everything else or drags in a whole bunch of other includes.
Move the xf86OptionRec and GenericListRec declarations into a separate
header.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The video driver ABI was bumped to 11.0 in commit
0de7cec907 because of a change to the
size of ATOM in commit 51f353d0a0. This
also affects extension modules, so the extension ABI version should
have been bumped too.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Stop duplicating in each os-support variant before it gets replicated
even further.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
InputOptions is not switched to use struct list for a future patch to unify
it with the XF86OptionRec.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This reverts commit 43d9edd31e.
This commit was introduced in the 1.2 cycle when hotplugging was less than
ideal (i.e. it didn't exist). From the commit message:
Always add a mouse driver instance configured to send core events, unless
a core pointer already exists using either the mouse or void drivers. This
handles the laptop case where the config file only specifies, say,
synaptics, which causes the touchpad to work but not the pointing stick.
We don't double-instantiate the mouse driver to avoid the mouse moving twice
as fast, and we skip this logic when the user asked for a void core pointer
since that probably means they want to run with no pointer at all.
To get this case above, a user would need to disable hotplugging _and_ have a
xorg.conf that only references one device. This is possible, but not a use-case
we should worry about too much now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Add support for multi-seat-aware input device hotplugging. This
implements the multi-seat scheme explained here:
http://www.freedesktop.org/wiki/Software/systemd/multiseat
This introduces a new X server switch "-seat" which allows configuration
of the seat to enumerate hotplugging devices on. If specified the value
of this parameter will also be exported as root window property
Xorg_Seat.
To properly support input hotplugging devices need to be tagged in udev
according to the seat they are on. Untagged devices are assumed to be on
the default seat "seat0". If no "-seat" parameter is passed only devices
on "seat0" are used. This means that the new scheme is perfectly
compatible with existing setups which have no tagged input devices.
Note that the -seat switch takes a completely generic identifier, and
that it has no effect on non-Linux systems. In fact, on other OSes a
completely different identifier scheme for seats could be used but still
be exposed with the Xorg_Seat and -seat.
I tried to follow the coding style of the surrounding code blocks if
there was any one could follow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Slowly merging the vastly different code-paths.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes, just readability improvements. This also gets rid of
the count variable. Count was just used for resizing the null-terminated
list. Since we're not in a time-critical path here at all we can afford to
loop the list multiple times instead of keeping an extra variable around.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
If we find the core device, move all other device pointers forward right
then and there. The break will jump out of the top loop.
They had a special on braces today, so I added some for readability (and
fixed up tab vs space indentation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes.
The options we assign are the ones from the Pointer/Keyboard device so we
might as well use those readable names instead of dev[count-1]->options.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Devices are core pointers/keyboards by default now anyway, but let's set the
option to some value instead of just NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
It doesn't matter. All devices are core pointer devices by default now
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
LogHdrMessageVerb allows passing a parameterized header to insert in a log
message between MessageType and the formatted message body string.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
LogHdrMessageVerb allows passing a parameterized header to insert in a log
message between MessageType and the formatted message body string.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of just closing the log when everything is done, put one more
message in stating that we're actually terminating. Users or scripts that
look at the Xorg.log will then know that a) the server has terminated
properly and b) why the server terminated (to some degree, given that most
real-world errors will be caused by AbortServer()).
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For hotplugged devices, xf86AllocateInput does that for us but the xorg.conf
path is different. Since not all drivers reset the fd during PreInit but may
still call close(pInfo->fd) in all cases, this can terminate the logging
early.
Reproducible: add a wacom driver InputDevice section with no Option Device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xf86ConfigLayout.inputs contains the information from the xorg.conf
file. Passing this into xf86NewInputDevice means the device will get
cleaned up on exit and the pointers in xf86ConfigLayout.inputs are left
dangling. In the second server generation, this results in a server
crash.
Also, rename pDev to pInfo. pDev is pretty much reserved for DeviceIntPtr
types.
Reproducible: AutoAddDevices off and xorg.conf input sections, trigger
server regeneration.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Devices that succeeded during PreInit and DEVICE_INIT but failed in
DEVICE_ON would be deleted through xf86DeleteInput but not removed from the
list of input devices (and not turned off). The result was a double free on
server shutdown.
Fix this by calling RemoveDevice if EnableDevice fails.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
mieqFini() already does the right thing, but it needs to be called by the
various DDXs and the XTest Extension.
X.Org Bug 38634 <http://bugs.freedesktop.org/show_bug.cgi?id=38634>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Acked-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This struct was unused and has been effectively removed in
commit 633b81e8ba
Refs: xorg-server-1.10.0-133-g633b81e
Remove the remainder, with an ABI bump to 13.0.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Usage example (tested on a dual-seat PC):
Section "InputClass"
Identifier "keyboard-all"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
MatchLayout "!GeForce|!Matrox"
Driver "evdev"
Option "XkbLayout" "us"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
It disables auto keyboard configuration for layouts "GeForce" and "Matrox".
Note that "" in patterns means "no Layout sections found", e.g.
MatchLayout "GeForce|"
is "in layout GeForce or without explicit layout at all".
Signed-off-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We've broken the ABI with some commit and drivers built against ABI 10
happily segfault now.
(The relevant patch is 51f353d0a0 which
changed the ATOM typedef from unsigned long to uint32_t, thanks to
Cyril Brulebois <kibi@debian.org> for figuring this out)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
As a good practice and for eventual double frees.
The reason of this patch is due the resilience of xf86XVInitAdaptors, where
for any adaptor failure it's able to keep trying registering the following
ones.
I discussed briefly with Pauli and Ville about a bigger refactoring of such
function, doing it in a way to return instantly when a failure happens; after
all that's how mostly of the other driver functions work. Instead, we just
thought that xf86XVInitAdaptors is wise and cool, and eventually other driver
functions should be even following the main idea of resilience.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
When xf86XVFreeAdaptor is called more than once in xf86XVInitAdaptors (it may,
but not often), the conditional being changed in this patch will always take
true path and will keep freeing pAdaptor->pAttributes, thus letting the system
error-prone.
This patch fix such problem checking for a pointer instead the number of
attributes. Such pointer will be deallocated when xf86XVFreeAdaptor is called
first and will not let the code re-run in the following calls. This is a bit
similar how the surroundings code is already doing.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
introduced in 93ca526892.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Nicolas Peninguy <nico@lostgeeks.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
each DDX has its own copy, I've taken the darwin one,
though I'm not sure why it needs the pOldClip piece that nobody
else has and the commit msg is like an "Updates from magic land"
type message.
This removes the main uses of pWin->winSize from the DDXen.
v2: drop old clip like ajax suggests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Makes reading the log file a lot easier for those that don't magically
recognise the log spew by the individual drivers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This reverts commit 1564c82417.
The drivers used the top bits of the usage_hint to store driver
private flags (intel, radeon, nouveau).
With EXA we need to get at this data so if we migrate the pixmap we
can create the correct type of pixmap in the driver, however this
commit truncates the usage_hint into 8-bit class and loses all the
good stuff.
Signed-off-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Devices usually enable SIGIO processing in EnableDevice. CheckMotion
initialises the pointer sprite, sends Enter/Leave events, etc. This leaves
us with a small window where events may be processed without the sprite or
pointer position (as seen from the protocol) is valid.
Block signals during this window.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
configScreen used a dynamically allocated buffer for XF86ConfScreenRec
when conf_screen argument was NULL. This pointer was never stored
anywhere, nor was it released, so this patch makes the function use
automatically allocated storage in that situation.
[ajax: minor grammar fix]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
The class field was unused for pixmaps, and we don't have enough classes
to justify a whole uint32 anyway.
Reviewed-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Since commit b8d9c5ff removed commonOptions, we now
need to append the "Core{Keyboard,Pointer}" options to
the existing list.
Fixes passing options to devices confirured in xorg.conf
on systems where autoaddevices is false.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This allows set_percent_option in synaptics to work as described,
and should generally enable to check option syntax without log spam.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InitInput simply initialises all input devices now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
xf86VidMode.c: In function 'VidModeGetMonitorValue':
xf86VidMode.c:637:19: warning: 'ret.i' may be used uninitialized in this function
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If none of Xv ports were affected by window tree modifications we don't
want scan the port list. To avoid useless scanning of port list
PostValidateTree hook is only registered when ClipNotify was called for
any port.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
ValidateTree calls first ClipNotify and later might call
WindowExposures. To avoid useless double reput ClipNotify delays reput
to WindowExposures or PostValidateTree.
PostValidatTree checks all ports if there is clip changes. On clip
changes reput is done to move or scale the overlay.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
If window gets exposed but clipboxes doesn't change drivers would avoid
color key fill. This makes XResizeWindo&co to lose colorkey if
background is painted.
To help drivers to avoid filling colorkey for each put server can
provide helper function if there is exposed areas. Server can subtract
exposed areas from filled region.
As a side effect we can avoid useless color key fills if window only
moves in screen without background fills.
v3:
* Change tracking to filled area to account for client initiated clip
changes
* Make overlaid XvPutImage behavior like textured XvPutImage or PutImage
* Make region dynamically allocated only when required.
v4:
* Simplify new driver interface to reduce duplicate code
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
xf86XVFillKeyHelperDrawable can be used to implement
xf86XVFillKeyHelper.
V2:
* Remove RegionTranslate that clobbered parameter region.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
DGAIsDgaEvent() is not used anymore.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Move some variables to the scope where they are used.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously some sort of absolute coordinates were sent out in
the padding of the DGA2 Motion and Button events. DGAMouseX
and DGAMouseY were used to keep track of said coordinates.
libXxf86dga doesn't use that data for anything, and at least
git history didn't show any past usage either. So let's just
remove the last remnants of of this mess.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Copy dx/dy from the internal event to the DGA2 Motion/Button events.
Do the same for Key events for the sake of keeping the code consistent.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
mieq_installed is used as a boolean, so why not make it such. Also
it's a static variable, so the the explicit zero initialization can
be removed.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Remove the handler only if it was installed. Also mark it as
uninstalled, otherwise it wouldn't get reinstalled after a
server reset.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The ET_DGAEvent handler is only installed when a client
requests relative events via DGA1. Do it also when a client
requests DGA2 events.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
DGA key event support was lost in commit
8da0ff2d51. Bring it back.
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Pass the subWindowMode from the GC/source Picture to SourceValidate.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xf86AutoConfig.c: In function ‘FreeList’:
xf86AutoConfig.c:123: warning: passing argument 1 of ‘free’ discards
qualifiers from pointer target type
/usr/include/stdlib.h:488: note: expected ‘void *’ but argument is of
type ‘const char *’
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Input drivers may use valuator masks for internal state. Having all the
valuator_mask_* functions available will help.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Bump ABI_XINPUT_VERSION minor.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Back when we had RAC this was a vaguely meaningful thing. Since then
it's been a glorified (and confusing) wrapper around xf86BlockSIGIO.
Note that the APM and VT switch code are unusual relative to other code
that cares about SIGIO state. Most callers push a SIGIO disable to
create a critical section for the duration of the caller's stack frame,
but those two effectively disable SIGIO after their return and re-enable
on their next entry.
Reviewed-by: Tiago Vignatti <tigo.vignatti@nokia.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Enter was changing server operating state, Leave wasn't. Which was
wholly redundant, since all callers of Enter would immediately change
the operating state to exactly what Enter had just done.
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This has never been buildable in any modular server release.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
What is this, I don't even.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
After collecting the driver's default options, report the list of options
set for the device before calling PreInit(). This helps with debugging those
cases where options are not merged correctly.
xf86OptionListReport reports with verbosity 5, higher than the default
verbosity so this won't generate logspam in the default case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Current order causes the user-configured option list to be overwritten with
the default list supplied by the driver. Swap around so we overwrite the
driver's default values instead.
This only affected options supplied by the driver such as XkbLayout in the
case of evdev.
Reported-by: Sebastian Glita <glseba@yahoo.com>
Reported-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Sebastian Glita <glseba@yahoo.com>
If a device doesn't send valuators, don't try to move its position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Commit 606e079cc4 moved the visual
field in WindowOptRec, breaking the extension module ABI.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This provides for separate sizes for the screen scanout and rendering
buffer and the application-visible screen size.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Single allocation point for input devices, most notably a single point to
reset default values.
Without this patch, the file descriptor default was -1 for hotplugged
devices and 0 for config devices. Drivers that don't overwrite the default
themselves would thus fail if configured in the xorg.conf.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Options set in the configuration file were unconditionally overwritten by
the server. Merge the already existing options and the new options together
instead of just overwriting ones.
Introduced in commit 2199842ed5
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Thu Sep 2 10:52:54 2010 +1000
xfree86: remove extraOptions field from IDevRec.
X.Org Bug 32115 <http://bugs.freedesktop.org/show_bug.cgi?id=32115>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: David Ronis <ronis@ronispc.chem.mcgill.ca>
Some devices should be initialised as floating from the start (e.g.
Joysticks and accelerometers benefit from this). Currently users use the
"SendCoreEvents" "off" flag for this, which isn't the most appropriate
naming.
Add an option "Floating", deprecate the others. Still parsed and handled by
the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No point calling the no-fail-alloc if you check for failure and your
only caller checks for failure.
No point calling calloc to zero fill memory you're about to memcpy over.
In the unlikely event of a loss of memory allocation, drop your previous
allocations before returning to others.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
static function only called from the matchDriverFromFiles function
that's inside #ifdef __linux__ section
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reput all ports when the display mode or panning has been changed by
RandR code. This makes the overlays appear in the correct position
on the screen.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Add a new hook ModeSet that will be called after display mode is
changed, or after the display has been panned.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Pass all of the src/dst coordinates to ReputImage so that drivers
don't necessarily have to do double bookkeeping.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Document the fact that ReputImage is used for stills as well as images.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
PutImage/PutStill respect the GC clip, however ReputImage does not.
PutImage/PutStill are supposed to be oneshot operations so ReputImage
should never expand the area covered by the clip, instead it should
only shrink if the window clip shrinks. So commandeer clientClip
into use by ReputImage and initially make it a copy of the original
GC composite clip. Whenever ReputImage needs reclipping update
clientClip with the newly calculated composite clip.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
clipOrg never changes except when clientClip changes, so instead of
keeping copies of both originals translate clientClip by clipOrg
immediately and just keep the translated clientClip.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Also reput PutVideo/GetVideo ports in AdjustFrame. This makes the
overlay track the screen panning instead of staying stationary in the
wrong place.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Nothing should change in AdjustFrame that would need the composite clip
to be recomputed.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
When ClipNotify gets called for a visible window, reput instead of
stopping the port. This eliminates nasty overlay flickering that
happens during clip changes.
If the window is invisible or if ReputImage isn't supported stop
and remove the port from the window as was done before.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Modify xf86XVReputOrStopPort() to allow stopping of all types of ports.
Will be useful later.
No functional change.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
WinPriv->PortRec should never be NULL as WinPriv itself would be removed
from the list when the port is removed from the window.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
That helps us get rid of:
| CC xf86Config.lo
| xf86Config.c: In function ‘T.174’:
| xf86Config.c:1228: warning: ‘Pointer$module’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$module’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$drv’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$drv’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$type_name’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$type_name’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$private’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$private’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$dev’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$dev’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$fd’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$fd’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$set_device_valuators’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$set_device_valuators’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$switch_mode’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$switch_mode’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$control_proc’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$control_proc’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$read_input’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$read_input’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$device_control’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$device_control’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$flags’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$flags’ was declared here
| xf86Config.c:1228: warning: ‘Pointer$next’ may be used uninitialized in this function
| xf86Config.c:1097: note: ‘Pointer$next’ was declared here
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a more accurate name for the actual functionality than
allowEmptyInput. Historically, allowEmptyInput has allowed the server to
start with no input devices. Since 1.4 and the introduction of VCP and VCK,
there are always two input devices present.
allowEmptyInput was changed in behaviour to essentially "ignore xorg.conf
devices or not", auto-adding the built-in devices if disabled.
Rename to forceInputDevices, because that's essentially what it does. When
disabled (i.e. when hotplugging is enabled), it disables all
mouse/kbd/vmmouse devices configured in the xorg.conf file.
When enabled, it forces the traditional behaviour for input devices:
- use input devices configured in the server layout
- if none are configured, use the first pointer and the first keyboard
device in the xorg.conf
- if none are configured, create the default pointer/keyboard devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
An estimated 100% (rounded down to the nearest percent) of the people who
have this in their configuration don't actually know what this option does.
Protect the users from themselves.
IIRC, AEI on was useful for some time between 1.4 and 1.5 and never since.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
../../../../hw/xfree86/common/xf86Config.c: In function 'configDRI':
../../../../hw/xfree86/common/xf86Config.c:2213:9: warning: unused variable
'i'
Introduced in 788bfbf18a
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
../../../../hw/xfree86/common/xf86Config.c: In function
'fixup_video_driver_list':
../../../../hw/xfree86/common/xf86Config.c:507:19: warning: unused variable
'atimisc'
../../../../hw/xfree86/common/xf86Config.c:507:12: warning: unused variable
'ati'
Introduced in 52577ae8ee.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Some drivers, most notably the mouse driver need this and reimplementing on
the driver side doesn't make sense.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
EventToCore as of the commit below won't generate core motion events if the
valuator mask for x/y isn't set. For DGA, we work around this check by
forcibly setting the mask in the event we pass down.
commit de8be07cc0
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Tue Aug 17 12:08:52 2010 +1000
dix: don't create core motion events for non-x/y valuators.
X.Org Bug 30267 <http://bugs.freedesktop.org/show_bug.cgi?id=30267>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Andrew Randrianasulu <randrik@mail.ru>
Tested-by: Andy Furniss
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
After we infer the aspect ratio for the screen, we pick the largest
mode matching that aspect ratio from the best mode pool available.
We then clamp virtual size to that mode, and run the resulting mode
list through the driver's ValidMode hook. In doing so we might filter
away our initial guess. If this happens we shrink the default mode
to the next largest mode from _any_ mode pool. This is usually wrong,
and we should instead pick the next aspect-matched mode from the best
available mode pool (as always, user then driver then default).
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This was only ever used from the glint driver, which has since lost its
DRI support.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This was to distinguish XFree86 3.x files from XFree86 4.x files. It
never really made sense to be looking for xorg.conf-4.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This hasn't worked since we switched to dlloader.
Reviewed-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Maybe it's just me but every time I look at it I get confused again and need
to work it out from scratch. Rename the parameters to something
self-explanatory, to/from and min/max.
No functional change.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
ScrnInfo->pixmapPrivate only existed in order to catch invalid access to
the framebuffer by making the backing data NULL across the VT switch.
This was causing more confusion in the higher layers during mode setting
without any real benefit, so remove it.
v2: Kill ShadowModifyPixmapHeader() as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Julien Cristau <jcristau@debian.org>
Cc: Andrew Guertin <lists@dolphinling.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add nds32 support for compiler related mmio codes.
It includes byte-swap or non-swap operations.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add nds32 definitions and related assembly codes to compiler header files.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Does what it says on the box.
Some drivers need to duplicate option lists from the original device to
ensure that devices created by the driver (driver-internal hotplugging) have
the same list of options as the original device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
The primary device being PCI or not has no effect on the server working. This
message is superfluous.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This patch makes xf86Configure.c free of PCI and SBUS code, moving to a more
meaningful location.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Make xf86IsolateDevice private on PCI common file.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
None of XAA, EXA, or UXA do any hardware access during CreateGC, so they
don't need VGA arbitration. I haven't found any open source drivers that
hook CreateGC, so they're safe. I'd be surprised if any driver directly
hooks CreateGC and does hardware access from it and needs VGA
arbitration.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This fix a problem introduced in commit 65466652. It closes also:
https://bugs.freedesktop.org/show_bug.cgi?id=30160
Reported-by: <xunx.fang@intel.com>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We assume already that our X implementation is POSIX compliant anyway. So
remove those redundant checking.
SA_SIGINFO is left there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
This hook is only necessary for the keyboard driver to remove the race
condition between drain_console() and the driver's ReadInput (Bug 29969).
The idea is that a driver that needs to handle events from the console
calls xf86ReplaceConsoleHandler() with it's own ReadInput (or NULL) and thus
removes the drain_console call. It's the driver's responsibility to restore
the previous behaviour when the driver is unloaded.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CC: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There are no references to it other than the commit that added them. But
since we're re-doing the API anyway, now is a good time to break things.
commit 9398d62f27
Author: Daniel Stone <daniel@fooishbar.org>
Date: Wed Mar 21 00:18:24 2007 +0200
XFree86 input: Add backwards compatibility for motion history
Add the old motion history API back, as a shim around the new mi
API.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
The input drivers that use it only do so with ABI 0 and we're long past this
one now. Input driver don't have a say in whether they send core events now
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Use xf86FirstLocalDevice() instead (but don't get me started on the naming
of that one...)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
We have a driver hook - it's UnInit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
This struct is superfluous, maintaining the same info as the InputInfoRec
(with the exception of the driver name).
This is a rather large commit with the majority of changes being a rename
from the fields of the IDevRec (idev, commonOptions) to the InputInfoRec
(pInfo, options).
The actual changes affect the initialization process of the input device:
In NewInputDeviceRequest, the InputInfoRec is now always allocated and just
added to the internal list in xf86NewInputDevice() if the init process
succeeded.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
When no identifier for the device was specified, the allocated IDevRec (and
its associated fields) need to be freed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
And unexport it, drivers don't need to call this in the new init process.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
InputInfoRec hasn't had a free function pointer since the git import.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
None of them are called by the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
The Irxon Super Mini Bluetooth Wireless Keyboard for PC/PDA/Cell Phones
keyboards have axes but not buttons. The evdev driver doesn't set up a
button class for these keyboards and a motion event handled by
DGAProcessPointerEvent dereferences the dev->button NULL pointer, causing a
server crash.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This field was only used in one location where we can use a local variable.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This was obsolete after 3eeb62e8f5 "bug #890: completely remove deprecated keyboard driver".
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This hook wasn't used by any DDX. Device addition and removal is handled by
the config backend, so we don't need to do anything special that during the
ListInputDevices request processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In theory, these hooks were to be used for DDX-specific device enablement.
None of the DDXs however did anything here. Now we call DEVICE_INIT on all
devices when they are added, so the xfree86 DDX as the only one with real
code didn't do anything here.
kdrive checked for device validity but that's already handled in
ProcXOpenDevice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Instead of shoving it in rather unrelated places, move acceleration init
into xf86NewInputDevice.
Caveat: It's not clear atm how relevant other callers of ActivateDevice
(like OpenDevice) actually are.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Two names pointing to the same struct for over 7 years now. Remove the
define, if drivers don't want to change they can always do the typedef
themselves.
Rename all "LocalDevicePtr local" to "InputInfoPtr pInfo".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Input driver messages are only standardised by convention, with the drivers
prefixing the device name to most messages. This makes it rather hard to
grep on "evdev" for example when looking for the evdev ouput.
This patch adds three new logging functions, modeled after xf86DrvMsg(), the
logging function for output drivers. New functions are
xf86IDrvMsg() - input driver log message in default verbosity.
xf86IDrvMsgVerb() - input driver log message in specified verbosity.
xf86VIDrvMsgVerb() - same as xf86IDrvMsgVerb() but takes a varargs
argument.
Default log format is <driver name>: <device name>: <message>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Make xf86AllocateInput static in the process, this function is only called
from one location.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Right now, Xephyr and others don't get to use XKB on the slave devices.
Which works given that no-one cares about SDs just yet but event processing
is different if the ProcessInputProc isn't wrapped properly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
From the documentation:
"This is mainly to allow a touch screen to be used with netscape and other
browsers which do strange things if the mouse moves between button down and
button up."
CLOSED - NOTOURBUG
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
PreInit returns a status code. Let's use that instead of having it report
Success in some cases but not set the XI86_CONFIGURED flag and thus signal
an init failure.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
These defines have been write-only for a while now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
ActivateGrab and DeactivateGrab are set in AddInputDevice() already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No-one but the joystick driver uses it and that one should be using NIDR
instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
config_info is the only reliable indicator we have in the server for
duplicate devices (drivers can test for maj/min on fds as well). Don't set
this after the device has been initialized but assume it's important enough
to set during NIDR.
This makes the option "config_info" available to the drivers as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The main change introduced in this patch is the removal of the
back-and-forth between DDX and the driver.
The DDX now allocates the InputInfoRec and fills it with default values. The
DDX processes common options (and module-specific default options, if
appropriate) before passing the initialised struct to the driver.
The driver may do module-specific initializations and return Success or an
error code in the case of a failure.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
../../../../hw/xfree86/common/xf86Xinput.c: In function ‘xf86AllocateInput’:
../../../../hw/xfree86/common/xf86Xinput.c:722: warning: implicit
declaration of function ‘DuplicateModule’
../../../../hw/xfree86/common/xf86Xinput.c:722: warning: nested extern
declaration of ‘DuplicateModule’
../../../../hw/xfree86/common/xf86Xinput.c:722: warning: assignment makes
pointer from integer without a cast
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Previously, the functions would call xf86VDrvMsgVerb with a screen of -1
despite their comments saying they were for "non-driver messages".
They now call LogVMessageVerb, which is what xf86VDrvMsgVerb does anyway
when it has a screen == -1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
These are leftovers from when X still used Xmalloc and friends for allocation.
Now that those are gone, these comments are just confusing.
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Right now, when there is more than one vide card on the machine, we're
adopting a pessimistic approach and setting all cards to decode VGA legacy
address.
Some cards may want to skip the arbitration and the only way to do so is
through pci_device_vgaarb_decodes. Therefore, send the desired kind of
resource instead force the worst case.
Note that xf86VGAarbiterDeviceDecodes is not being used so far by any
open-source driver. Even so, API break.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
This was inherited from RAC and was never used there either.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
None of them do anything useful now that pointer acceleration is
entirely handled in the server. (Does not completely nuke yet,
since that would be an API/ABI break.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Because some EnterVT code needs to remove it self from the
call chain, we need to fix all of the wrappers to correctly
unwrap/rewrap during the call chain. This is a follow-on to the fix
for bug 27114 in commit 68a9ee8370.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Jesse Barnes <jesse.barnes@intel.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Although vendor and board naming are used to create the configure file, the
server doesn't actually use it when fetching such file and probing devices.
Reported-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
X server suffers in startup time when relying on the pciaccess's linear search
to fetch vendor and video device name from PCI ID file (when existent). Such
names are only used to write the log, which may be superfluous. This
information often is provided by the drivers or likewise users can get the it
using external tools like lspci or scanpci.
This patch remove the references of those functions from X start up.
Reported-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Reviewed-by: James Cloos <cloos@jhcloos.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Often we want to apply a driver specific option to a set of devices and
don't care how the driver was selected for that device. The MatchDriver
entry can be used to match the current driver string:
MatchDriver "evdev|mouse"
Option "Emulate3Buttons" "yes"
The driver string is a case sensitive match.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently when there multiple InputClass entries of the same type, only
the last entry is used and the previous ones are ignored. Instead,
multiple entries are used to create multiple matching conditions.
For instance, an InputClass with
MatchProduct "foo"
MatchProduct "bar"
will require that the device's product name contain both foo and bar.
This provides a complement to the || style matching when an entry is
split using the "|" token.
The xorg.conf man page has added an example to hopefully clarify the two
types of compound matches.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:
MatchUSBID "046d:*"
The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:
MatchPnPID "WACf*"
A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Allow InputClass sections to match against the running operating system
to narrow the application of rules. An example where this could be used
is to specify that the default input driver on Linux is evdev while it's
mouse/kbd everywhere else.
The operating system name is the same as `uname -s`, and matching is
case-insensitive.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InputClassMatches was starting to get a little hairy with all the loops
over the tokenized match strings. This adds code, but makes it easier to
read and add new matches.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Jamey Sharp <jamey at minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
The move of the PCI device id probing into a separate file neglected to
return the number of found devices, and so the PCI devices were being
overwritten by the default entries for vesa and fbdev.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tiago Vignatti <tiago.vignatti@nokia.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
commit c2d0b3b437
"xfree86: store the InputAttributes in the input device."
introduced the new API. Bump the input version so drivers can handle this
appropriately.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301.
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
InputAttributes largely decide which configuration values get merged from
the xorg.conf.d snippets. While they are available in the config backend,
they are not available for any other callers of NewInputDeviceRequest().
Drivers implementing driver-side hotplugging do not have access to these
attributes and cannot have xorg.conf.d snippets specific to dependent
devices. For example, the following case cannot work right now:
Section "InputClass"
MatchProduct "Wacom"
Option "PressCurve" "0 0 100 100"
...
EndSection
Section "InputClass"
MatchProduct "Wacom"
MatchProduct "eraser"
Option "PressCurve" "10 10 50 50"
...
EndSection
The second section is not triggered, as the wacom driver cannot supply the
InputAttributes to NewInputDeviceRequest().
Add the attributes to the IDevRec and merge them into the InputInfoRec to
make them accessible in the driver. This changes the ABI for input drivers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This patch creates the private xf86PciMatchDriver hook, which goes inside pci
code to match the drivers found in the system.
Now there's no direct references to PCI inside xf86AutoConfig.c anymore.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
xf86MatchDevice will never be called in configuration time.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Move all PCI procedures from xf86Helper.c to a more meaningful place (namely
xf86pciBus.c). xf86Helper.c is free of PCI code now.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
RAC is the champion of remaining trash for sure!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This function had a wrong name and was just logging the primary device. No one
cares about it honestly.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
attr->tags is an array of strings (null-terminated). When matching, match
against each string instead of each [i,end] substring in the first tag.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Because we don't want anyone to get hurt.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
All functions that touch PCI and BUS were moved to their own files, organizing
the mess inside the InitOutput. Now, inside InitOutput, mostly accesses to
buses are coordinated by the new xf86BusConfig.
Two PCI probe functions just changed the name and a procedure to receive the
isolate devices parameters was created also, named xf86PciIsolateDevice.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
It's RAC remnant. This was substituted by xf86VGAarbiter{Lock, Unlock}
mechanism.
It's an API break, but the few drivers using it were covered already with
macros to avoid problems.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The code in xf86sbusBus.c seems too OS-specific to be usable on OpenBSD.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Okay, seems we're not using extensively such hooks in fact. But fix the
expected behaviour at least.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The function was only initializing the boolean xf86ResAccessEnter, which
couldn't get any other value in the life of the server.
The only possible, though suspicious, code was in xf86AccessLeave(), which
could be triggered if AbortDDX is called before xf86AccessInit(). Even so,
such change is safety because no driver would have configured any entity leave
procedure at this point.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In some cases, an option of "50%" would be preferable over fixed value
configuration - especially if the actual values are autoprobed.
Add a new set of functions to parse percent values from configurations.
The percent value parsing differs slightly - if the option is not to marked
as used (e.g. xf86CheckPercentOption()), no warning is emitted to the log
file if the value is not a percent value. This allows double-options (either
as % or as absolute number) without warnings.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Other DDXs don't use input hotplugging since config_init was moved to
the DDX in commit d33adcdf03, so there's
no need to link this in.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use the values from xproto rather than duplicating the effort
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ResNoAvoid is #defined to ResBios, but ResBios was removed
from xf86str.h in 4b42448a23
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
The call in CreateGC is particularly questionable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
GetPairedDevice() may not always return the keyboard, resulting in a
null-pointer dereference when accessing the XKB state.
For floating devices, the GetMaster() returns the device itself.
X.Org Bug 27573 <http://bugs.freedesktop.org/show_bug.cgi?id=27573>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Ben Hutchings <ben@decadent.org.uk>
We call NIDR on all devices that make it through the config backend.
Including some that have no driver assigned to them (/dev/input/mouse0 for
example). Those ones then simply get ignored by NIDR, but this should not be
noted as an error in the log file.
X_INFO is sufficient, and it may just prevent some bugreports.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Banked framebuffers are so 1990. As of 7.4 the only drivers remaining
that used this were chips, neomagic, trident, and vesa. vesa only used
it when not using shadowfb, which is broadly undesirable anyway, and no
longer uses it at all as of 2.3.0. neomagic never used it by default,
and support for it is gone in git master. The other two effectively
only ever used it for ISA chips; since ISA support is now gone from
the server, they have been modified to only compile mibank support when
ISA support is available.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
While VT-switched, FB access is disabled and should remain so. Trying to switch
modes in that state would re-enable it, potentially causing crashes if trying
to access it before the driver has recovered from the mode switch.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
numScreens is always being assigned to 0 in dix for any server generation.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This replaces a globally-allocated array that depended on MAXSCREENS.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
High resolution devices was generating integer overflow.
For instance the wacom Cintiq 21UX has an axis value up to
87000. Thus the term (dSx * (Cx - Rxlow)) is greater than
MAX_INT32.
Using 64bits integer avoids such problem.
Signed-off-by: Philippe Ribet <ribet@cena.fr>
Signed-off-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 8736d112af changed the priority
ordering of the InputClass option merging to be "last match wins". This
fixes the handling of Option "Ignore" to follow that logic.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In addition to the conf files found in /etc/X11 or $sysconfdir/X11 used
for local administration, we also reserve a system directory for vendor
and package usage. The simple search path is:
/usr/share/X11/xorg.conf.d
$datadir/X11/xorg.conf.d
Files from these directories will have the lowest config priority. The
directory $datadir/X11/xorg.conf.d is exported from xorg-server.pc in
the variable "sysconfigdir". Packages should install their .conf files
to the directory specified by:
`pkg-config --variable=sysconfigdir xorg-server`
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no reason to carry all the oddities from xorg.conf like appended
hostname to the search path for xorg.conf.d. This changes it to something
very simple:
/etc/X11/<cmdline>
$sysconfdir/X11/<cmdline>
/etc/X11/xorg.conf.d
$sysconfdir/X11/xorg.conf.d
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
vga arbiter will be locked in one device while AbortDDX will call LeaveVT
routines from the other device. Fail!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When doing driver autoconfiguration with some parts of the config file
present but no driver set (e.g. only input configuration) fix the case
that we may have multiple drivers to try.
Create a screen section for each driver and let them be tried in a row.
Signed-off-by: Ruediger Oertel <ro@suse.de>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Timo Aaltonen <timo.aaltonen@aalto.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
A driver that is assigned by an input class is only present as idev->driver.
The driver itself has no access to this information once PreInit is called.
For devices that rely on chain-hotplugging (wacom), this means that for the
second device the driver information is lost and the second device cannot be
initialized through NewInputDeviceRequest. Although this could be worked
around by hardcoding the driver name in the wacom driver, having the
assigned driver in the options seems like the better solution.
This issue only manifests itself with the udev backend. With HAL, the driver
is assigned by HAL and the option is duplicated in config/hal.c.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
buffer_alloc: Called allocating function "realloc" which allocated memory dictated by parameter "len + strlen(displaySize_string)"
alloc_strlen: Allocated memory does not have space for the terminating NUL of the string
var_assign: Assigned "ptr->mon_comment" to storage allocated by "realloc(ptr->mon_comment, len + strlen(displaySize_string))"
Signed-off-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xf86Config.c: In function 'configInputDevices':
xf86Config.c:1514: error: request for member 'lay_identifier' in something
not a structure or union
make[5]: *** [xf86Config.lo] Error 1
Introduced with e1165632bd.
X.Org Bug 26971 <http://bugs.freedesktop.org/show_bug.cgi?id=26971>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
In the vast majority of cases there is no xorg.conf that specifies a core
pointer/keyboard. Skip this warning, since we'll get another notification
about how the server relies on the config backend for input devices anyway.
Leave the warning in for the error case (AEI off).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
When the compat output is missing (I don't think this is actually
possible), or is disabled (and hence has no crtc), we would like to
avoid dereferencing NULL pointers. This patch creates inline functions
to extract the current compat output, crtc or associated RandR crtc
structure, carefully checking for NULL pointers everywhere.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The problem fixed by this patch can be reproduced on Linux with the
following steps.
- Access NULL pointer intentionally in ProcessOtherEvent on key press.
- Instead of saving core dump to a file, write it into a pipe.
echo "|/usr/sbin/my-core-dumper" > /proc/sys/kernel/core_pattern
- Dump the core by pressing a key.
While the core is being dumped into the pipe, the smart schedule timer
will cause a pending SIGALRM. Linux kernel stops writing data to the
pipe when there are pending signals. This causes the core dump to be
truncated. On my system I'm expecting a 6 MB dump but the size will be
60 kB instead. The problem is solved if we block the SIGALRM caused by
expired smart schedule timer.
I haven't been able to reproduce this problem in the following cases.
- Save core dump to a file instead of a pipe.
- kill -SEGV `pidof Xorg`
- Press a key to dump core while gdb is attached to Xorg.
- Give option -dumbSched to Xorg.
Also note that the fix works only when NoTrapSignals has the default
value FALSE. The problem can still be reproduced if error signals
aren't trapped. In addition to pending SIGALRM, there is a similar
problem with pending SIGIO from the keyboard driver during core dump.
Signed-off-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Currently the config and InputClasses are merged together so that the
options from the config backend have the highest priority. This is bad
since it means options such as a default XKB layout set by the backend
cannot be changed by the user.
This patch changes order of precedence to be:
1. xorg.conf
2. xorg.conf.d (later files have higher priority)
3. config backend
In order to allow this ordering, the config parsing has been changed to
read the xorg.conf.d files before xorg.conf. This has the consequence
that the core device picking which looks for the first InputDevice may
not find it in xorg.conf.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The only DDX currently using hotplugging is the xfree86 one and it looks
like it'll stay that way for a bit. Move the initialization to the DDX,
since Xephyr, Xnest, and friends don't need HAL or udev notifications.
Add CloseInput (counterpart to InitInput) to be able to clean up the config
initialization from the DDX as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
The qxl driver is for the QXL virtualized graphics device.
Signed-off-by: Søren Sandmann Pedersen <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Tags may be a list of comma-separated strings that match against a MatchTag
InputClass section. If any of the tags specified for a device match against
the MatchTag of the section, this match is evaluated true and passed on to
the next match condition.
Tags are specified as "input.tags" (hal) or "ID_INPUT.tags" (udev), the
value of the tags is case-sensitive and require an exact match (not a
substring match).
i.e. "quirk" will not match "QUIRK", "need_quirk" or "quirk_needed".
Example configuration:
udev:
ENV{ID_INPUT.tags}="foo,bar"
hal:
<merge key="input.tags" type="string">foo,bar</merge>
xorg.conf:
Section "InputClass"
Identifier "foobar quirks"
MatchTag "foo|foobar"
Option "Foobar" "on"
EndSection
Where the xorg.conf section matches against any device with the tag "foo"
or tag "foobar" set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to keep the number of InputClass sections manageable, allow
matches to contain multiple arguments. The arguments will be separated
by the '|' character. This allows a policy to apply to multiple types of
devices. For example:
Section "InputClass"
Identifier "Inverted Mice"
MatchProduct "Crazy Mouse|Silly Mouse"
Option "InvertX" "yes"
EndSection
This applies to the MatchProduct, MatchVendor and MatchDevicePath
entries. Currently there is no way to escape characters, so names or
patterns cannot contain '|'.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Sometimes it is desirable to skip adding specific input devices to the
server. The "Ignore" option is used similarly to Monitor sections so
that matched devices will not be added. BadIDChoice is returned to the
config backend so that it will clean up all resources.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Drivers and options specified in InputClass sections work on a "first
match wins" strategy. Let's be consistent when documenting it.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is RAC's remnant. Any sane person would use a more wise method of
debugging instead.
X.Org Bug 26074 <http://bugs.freedesktop.org/show_bug.cgi?id=26074>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes crash when xscreensaver tries to use GammaRamp calls to fade out
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6915712
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds new function xf86Activate to the OS-specific *VTsw*.c files
and calls it from xf86ProcessActionEvent
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (GNU/Linux)
Fix for OpenSolaris bug 6876992: "[vconsole] Ctrl+Alt+F12 switchs to blank
console screen with hotkeys property turned-off"
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6876992
Xorg needs to do sanity test for the VT it is commanded to switch to.
If the VT is not opened by any process, discard the switching request.
The changes also contain the fix for some flaws discovered when
getting the new gdm to run.
Signed-off-by: Aaron Zang <Aaron.Zang@Sun.COM>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
xf86Xinput.c relied on xkbsrv.h's definition of True/False which seems odd
at first and weird on second glance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
With InputClass support, it makes more sense to cover all
aspects of acceleration in options. Previously, one could only set the
default on the command line.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ba2d39dd54 introduced warnings:
xf86Mode.c: In function ‘xf86CheckModeForDriver’:
xf86Mode.c:986: warning: passing argument 1 of ‘modeInClockRange’ from incompatible pointer type
xf86Mode.c:253: note: expected ‘ClockRangePtr’ but argument is of type ‘ClockRangesPtr’
xf86Mode.c:1002: warning: passing argument 1 of ‘modeInClockRange’ from incompatible pointer type
xf86Mode.c:253: note: expected ‘ClockRangePtr’ but argument is of type ‘ClockRangesPtr’
Because I foolishly didn't notice that we had types with nearly
identical members named ClockRange and ClockRanges. The latter
contained an extra 'strategy' member at the end, which claimed to be
needed by the vidmode extension. Of course, this was a lie: the only time
we'd use it was in mode validation, for drivers using LOOKUP_CLKDIV2 with
non-programmable clocks. The only driver using LOOKUP_CLKDIV2 is
rendition, which has a programmable clock. The only driver using the
ClockRanges type was smi, which did not use it for its 'strategy' member,
so has been fixed to use ClockRange instead.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
While the identifier is likely set before the input classes are merged, the
driver may not be. Hence don't check for a driver before we've completed
configuration for this device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.
The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:
* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen
See the INPUTCLASS section in xorg.conf(5) for more details.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Refactored code into the parser to allow the freeform boolean types used
in Option entries to be used in other configuration entries. This isn't
as powerful as allowing "No" to precede the option names, but it atleast
gives a common handling of "yes", "no", etc.
A type xf86TriState has been added to support an optional boolean. This
allows the boolean sense of the value to be kept while providing a means
to signal that it is unset.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Any input device with this option will be automatically added to whichever
server layout is selected at startup. This removes the need to reference a
device from the ServerLayout section. The two following configuration are
identical:
CONFIG 1:
Section "ServerLayout"
InputDevice "foo"
EndSection
Section "InputDevice"
Identifier "foo"
...
EndSection
CONFIG 2:
Section "InputDevice"
Identifier "foo"
Option "AutoServerLayout" "on"
...
EndSection
The selection of the server layout affects both explicitly specified
layouts and the implicit layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp at keithp.com>
Add a new command line parameter, -configdir, to specify the config
directory to be used. Rules are the same as -config for root vs. user
privileges.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Currently there is a single file, xorg.conf, for configuring the server.
This works fine most of the time, but it becomes a problem when packages
or system services need to adjust the configuration. Instead, allow
multiple configuration files to live in a directory. Typically this will
be /etc/X11/xorg.conf.d.
Files with a suffix of .conf will be read and added to the server
configuration after xorg.conf. The server won't fall back to using the
auto configuration unless there is no config file and there are no files
in the config directory.
Right now this uses a simpler search template than the config file
search path by not using the command line or environment variable
parameters. The matching code was refactored a bit to make this more
coherent. Any DDX wanting to read the config files will need to call
xf86initConfigFiles before opening/reading them. This is to allow
xf86openConfigFile without xf86openConfigDirFiles and vice-versa.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
I don't think this one has been in use since 2003.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Default remains the same - on for most OS'es on i386 (except Solaris),
off for everyone else. Can be manually toggled via --enable-pc98 or
--disable-pc98.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Most of the Xv Put/Get operations have an off by one error in the
viewport clipping.
Apparently PutImage was fixed at some point but the same code was
already copy-pasted all over the place, and so the other operations
still suffer from the bug.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously it was trying to set the same value as the default one. Sigh.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Technically, disabling AEI is the right suggestion. AEI off forces the
server to init the built-in defaults for input devices (or pick the first
one from the config file). At the same time, hotplugging is still available
with AEI off.
Unfortunatly, in the vast majority of cases users want to simply disable
hotplugging or have a working server while the local HAL configuration is
broken or missing. Disabling AEI will lead to duplicate events, triple
keystrokes, etc. once the configuration works again.
It's not actually required to remove AEI once hotplugging works again,
though it will in many cases lead to a setup that appears broken.
Asking users to disable AutoAddDevices instead means those users disable
hotplugging, can then fix the HAL setup and they _must_ remove the config
line again to test if hotplugging works again. Which doesn't leave them with
a broken config once everything is working nice and dandy. Less bugreports,
everybody wins.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: James Cloos <cloos@jhcloos.com>
Should probably also be applied to stabler xserver branches too.
Luc Verhaegen.
From a22bc20721bad506d8fa9772b1258568cbffe7d2 Mon Sep 17 00:00:00 2001
From: Luc Verhaegen <libv@skynet.be>
Date: Wed, 11 Nov 2009 15:52:39 +0100
Subject: [PATCH] Xv: Fix AdjustFrame when driver implements ReputImage.
Finally fixes fd.o #4653, filed more than 4 years ago.
Patch can be happily applied to all modular Xorg versions.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xorg creates its log file following the umask of the user running
startx, which may result in a world-writable log. Set umask to 022 to
prevent this.
Debian bug#555308 <http://bugs.debian.org/555308>
See also http://thread.gmane.org/gmane.comp.security.oss.general/2299
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Let's let glibc do the right thing for dense/sparse selection.
The _alpha_iobase code has been unused since the switch to libpciaccess. It
really should have been killed by fba700f1f6a8976.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Keith Packard <keithp@keithp.com>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The event fd may be invalidated by the pInfo->read_input call. If it is
invalidated, the subsequent FD_CLR call will segfault. Thus, the FD_CLR
call must precede the pInfo->read_input call.
Signed-off-by: Chase Douglas <chasedouglas@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Existing video drivers will get the console enabled by default.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This was initially fixed by commit 3932a84857
but then (presumably not intentionally) undone by commit
1d54479cb3 .
Signed-off-by: Hans Nieser <hnsr@xs4all.nl>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
* mattst88/master:
[alpha] assume we have __NR_pciconfig_iobase
[alpha] don't return from void functions
Fix undefined symbols on alpha
Fix breakage on alpha caused by c7680befe5
Revert "alpha: kill xf86SlowBCopyToBus and xf86SlowBCopyFromBus"
When testing if an fd is valid, the required construct is >= 0, not > 0.
[Daniel: Fixed up the Linux MTRR case as well.]
Signed-off-by: Martin Ettl <ettl.martin@gmx.de>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
The vesa driver still uses slowbcopy_frombus and slowbcopy_tobus.
This reverts commit 5ef53a94ce.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All input drivers use xf86PostKeyEventP indirectly now and have been since
it exists. I guess that qualifies it as tested - no need to spam the logs.
Reported-by: Felix Wenk
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Removing DGA ended up breaking any drivers calling into the old
xf86DiDGAInit function as it tried to see if DGA was already enabled
and ended up crashing if the VT wasn't completely initialized. Oops.
Also, if the driver initializes DGA itself, have the DiDGA
initialization overwrite that information as the DiDGA code will call
ReInit on mode detect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The DIX event queue is allocated before InitInput is called, so fetch
the pointer there and not randomly at other times. This avoids failing
to fetch the pointer sometimes during server regen and then smashing
memory through the stale pointer from the previous server generation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86MatchDevice returned malloc'd storage containing the list of
devices to look at; make sure that gets freed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Boolean option to enable/disable SIGIO handlers is set by the first
of these found:
- UseSIGIO option is set in xorg.conf ServerFlags
- Default set at build time by ./configure --enable-use-sigio-by-default
- Platform default value: Solaris = no, all others = yes
This matches the current settings on all platforms except Solaris.
This reverts Solaris (for now) to the settings used in Xorg 1.6, before
SIGIO support for Solaris was added, due to some system level bugs that
won't be resolved in time for Xorg 1.7 release, but allows us to enable
when those are resolved (or when we need to test if they're resolved).
See http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6879897
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
49b93df8a3 made the hard dependency on
a "fixed" font go away but only Xorg could use the built-ins fonts by
default.
With this commit, all DDXs get "built-ins" appended to their FontPath, not
just Xorg.
Tested with Xorg, Xvfb and Xnest.
Signed-off-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
So far there are no apparently issues on not closing the fd. But let's do the
right job here.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In practice, some of the native drivers for older Geode products
have become deprecated due to lack of e.g. libpciaccess upgrade,
but that's OK, since most distributions don't ship them anymore.
In that case, we'll let X server fall back to good old VESA.
xf86SlowBCopyToBus and xf86SlowBCopyFromBus cause segfaults on my
system.
Also remove associated slowbcopy_tobus/slowbcopy_frombus macros.
Signed-off-by: Matt Turner <mattst88@gmail.com>
All architectures should be able to use the same unaligned access code,
regardless of whether they need special unaligned access instructions.
Let's let gcc do the heavy lifting.
In the case that we're not using a gcc-compatible compiler, use memmove.
The xserver already requires pixman, so include pixman.h for its uint*_t
types.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Checks for __GNUC__ are superfluous since the only other compiler for
the platform is Compaq C, and it doesn't support GCC style inline
assembly.
Signed-off-by: Matt Turner <mattst88@gmail.com>
This adds support for using the libpciaccess interface for
vga arbitration support on top of a kernel which supports it.
Currently patches are queued for kernel 2.6.32 in jbarnes
pci tree, and shipping in Fedora kernel.
Co-authors:
Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This function was used as the default motion event queue API until
including XINPUT_ABI 2 (server 1.5).
This API was broken with 1883485 in May 2008 (wrong casting of parameters)
and isn't in use by input drivers past ABI 3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
No one is using bus notifications now. We hope that the kernel take care of
this properly.
For other not-so-urgent-notifications (ACPI wakeups, etc) we can just register
a handler on server's scheduler (using xf86AddGeneralHandler). And for
external applications, the "trend" is to use HAL to kick notifications. So
we're already provided of enough notification schemes.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
commit 48ee555833 (OpenSolaris VT support)
broke the autoconfiguration code in xf86AutoConfig.c that uses the
Solaris-specific VIS_GETIDENTIFIER ioctl on a frame buffer device like
/dev/fb by changing xf86Info.consoleFd from /dev/fb to a /dev/vt/*
device.
This fixes it by reworking the code to split the console device
(/dev/vt/*, the vtXX CLI option) from the frame buffer device
(/dev/fb, -dev option) to allow both VT and autoconfig to work.
It also fixes the console device to use /dev/fb when VT's are not
supported instead of throwing a Fatal Error because it can't open
/dev/vt/0.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
The xorg.conf generator was not assigning correctly the primary device
("bootable") as screen zero. So just skip this kind of routines for now.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
If you want to run a pre-1999 kernel, you'll need a pre-2009 X server
[Some pre-Solaris 8 VT support is left by this patch to allow reuse by
the new Solaris VT support that follows in the next patch.]
Signed-off-by: Aaron Zang <Aaron.Zang@Sun.COM>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
xf86PostKeyboardEvent also makes use of xf86PostKeyEventP to avoid code
duplication, and the valuator verification has been split into the
XI_VERIFY_VALUATORS macro.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Inside a windowing system, it's not the place to probe for devices. Goodbye
-probe and -probeonly.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Such stupid and ugly way to dump PCI information! Oh boy... Anyway, this
doesn't belong to the X server at all. Go away!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This changes the ABI, but since the video ABI is at 6 already
it should be fine.
driver changes are in the pipeline after this.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes screensaver fadeout effects.
Also make all RandR 1.2 compatibility code for XF86VidMode operate only on the
CRTC associated with the compatibility output, not all CRTCs at once.
This was a vestige from the days before we'd make the mode list from the
EDID data, and from CRT technology when you could reasonably assume that
higher refresh rates were better. Also it did not function as advertised,
acting as a high-pass filter instead of a band-pass.
xextproto had Xlib client headers moved into libXext.
Protocol header files are named fooproto.h, header files with constants
foo.h or fooconst.h where foo.h was already in use for client-side headers.
These old interfaces are no longer supported by the server, removing them
requires bumping the video driver ABI. Note that this is not guaranteed to
be the last change in ABI version 6.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Otherwise no subsequent driver will be able to claim this pci slot.
Example for this: fbdev tries to claim, but framebuffer device is not
available. Later on VESA cannot claim the device.
GIT change
http://cgit.freedesktop.org/xorg/xserver/commit/?id=45c8bd0fe54273039fdaa1eeeafb81b5774f2c75
changed the default symbol visibility of the Xserver. As a result 2 symbols
that are needed by the RandR 1.2/1.3 implementation in the fglrx driver are no
longer visible:
xf86configptr
xf86CursorScreenKey
We would like to get these two symbols _X_EXPORT'ed before Xserver 1.7 is
released. Otherwise it will be problematic for fglrx to support RandR 1.3 on
Xserver 1.7.
In the future, we may want to sync our RandR implementation to later versions
of the RandR implementation in hw/xfree86/modes. Therefore it would be nice if
all symbols used by the Xserver RandR implementation were _X_EXPORT'ed in the
future.
Previously when compiling on freebsd amd64 we'd end up at xi86
block (line 1315) which would define mem_barrier and write_mem_barrier
to be NOP's. Instead they should be valid, as per the linux amd64 setup.
This stops the hangs experienced by many when using the nv driver
which would hang due to out of order dma requests as noticed in
http://bugs.freedesktop.org/show_bug.cgi?id=3168
Signed-off-by: Benjamin Close <Benjamin.Close@clearchain.com>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
This way clients querying the gamma value via the VidMode extension at least
get the last value set via the same, rather than always something bogus.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Zapping is triggered by xkb these days, so note in the man page that it's the
Terminate_Server action. Since it's XKB, personal preferences towards or
against zapping should be achieved through xkb rulesets.
If Terminate_Server is not in the xkb actions, then we can't zap anyway and we
don't need a default of DontZap "on".
This patch restores the old meaning of DontZap - disallow zapping altogether,
regardless of XKB's current keymap.
Ideally, this patch should be accompanied by b0f64bdab00db652e in
xkeyboard-config.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
After the call to xf86ActivateDevice, the new device will be added to
inputInfo.devices. However, if the subsequent call to ActivateDevice
fails, the correponding InputInfoRec for the device is deleted but an
entry still remains in inputInfo.devices. This might lead to a server
crash later on (on InitAndStartDevices for instance) when the device
control proc would be called for an invalid device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Replace multi-stage filtering with simple linear velocity,
tracked several instances backwards. A heuristic ensures
only approximately linear motion is considered, so velocity
remains valid in any case. Numerical stability is much
better, and nothing changes to people who didn't tune the
advanced features of the previous algorithm.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
remove a few lines which redo part of the pointer acceleration
init. Properties is the way to go for them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix this bug report:
,----< from http://bugzilla.freedesktop.org/show_bug.cgi?id=20504 >
| Using the Visual StaticGray (8 bit depth) is missing one gray level.
| The gray level of index zero and index one are the same and all
| other levels are shifted by one. The max level (255) cannot be used.
`----
Signed-off-by: James Cloos <cloos@jhcloos.com>
DeleteInputDeviceRequest function doesn't handle "virtual" devices well.
TightVNC libvnc.so module to X (which makes bare Xorg VNC capable) uses such
kind of devices.
Bare Xvnc (it is something like Xvfb) simply uses AddInputDevice &
RegisterDevice functions. Xvnc uses DeleteInputDeviceRequest from Xi/stubs.c
so everything works fine (now I see that DeleteInputDeviceRequest in
Xi/stubs.c should call RemoveDevice function, shouldn't it? :) )
Situation is quite different when you use libvnc.so module. It uses same
schema as Xvnc, so it simply calls AddInputDevice & RegisterDevice. Thus
device is created correctly. When server is terminated it calls
DeleteInputDeviceRequest (now from hw/xfree86/common/xf86Xinput.c) for each
device. Here is the difference - Xvnc calls DeleteInputDeviceRequest from
Xi/stubs.c as I wrote above. Thus Xorg gets sigsegv because "VNC" devices
don't have real input driver.
X.Org Bug 20087 <http://bugs.freedesktop.org/show_bug.cgi?id=20087>
[This isn't really a fix (libVNC should behave correctly) but not crashing the
server sounds like an improvement.]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the API change, we can now purge the XI conversion from POE.
Note: this commit breaks DGA even more.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
Was only used to provide a list of input devices that XF86-Misc could use,
now that XF86-Misc is gone, was parsed and logged, then completely ignored.
(Depends on previous patch that introduces OBSOLETE_TOKEN in parser to
make obsolete keywords like InputDevices & RgbPath be non-fatal errors.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Adam Jackson <ajax@redhat.com>
This was all a glorified no-op. We rely on pciaccess to create device
maps anyway, so we should have no reason to care about what the host
address is.
Acked-by: Ian Romanick <ian.d.romanick at intel.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
By making the "Unable to open config file" header a warning, it was
not appearing with the filename when a config file was specified and
not found. Now we make it an error message again, but only issue
the error if a filename was specified - if none was specified, then
we don't even issue a warning, just the "Using autoconfig" info message.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Instead of always keeping two copies of the keymap, only generate the
core keymap from the XKB keymap when we really need to, and use the XKB
keymap as the canonical keymap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XkbInitKeyboardDeviceStruct is now the only valid keyboard
initialisation: all the details are hidden behind here. This now makes
it impossible to supply a core keymap at startup.
If dev->key is valid, dev->key->xkbInfo->desc is also valid.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If we can't enable a device, bail out of NewInputDeviceRequest rather than
blithely continuing. Also, be more verbose when initialization failed. Also,
be more verbose when initialization failed. Also, be more verbose when
initialization failed. Also, be more verbose when initialization failed.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There are several other direct calls to free, check
% egrep '\<free\(' `find . -name \*.c`
but they are free'ing memory from explicit malloc calls.
This one was not intended, and corrected, so that it would
both, follow the conventions everywhere (and work on some
libc that doesn't like free(0)), and make it easier to use
malloc wrappers.
The builtin-fonts configure option was removed, as it at best should
have been a runtime option. Instead, now it always register all "font
path element" backends, and adds built-ins fonts at the end of the
default font path.
This should be a more reasonable solution, to "correct" the most
common Xorg FAQ (could not open default font 'fixed'), and also don't
break by default applications that use only the standard/historical
X Font rendering.
Add a ClipNotify helper that lets the driver know about changes in the
clipping of an Xv backing drawable.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Devices are only activated once - right after they've been added to the
server. If a device failes activation, it's dead. There's no reason to
continue. Return the error code from ActivateDevice() without setting up
sprite information or even sending a event to the client.
Then - in the DDX - just remove the device again.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
- The Gamma values from the monitor section are now used during initial config.
- The old colormap system is disabled when gamma set hook is available.
- Gamma values are now persistent for the lifetime of the xserver.
- This requires no driver changes and should be driver ABI compatible.
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The awk script was incorrectly referencing the struct name, and
not the struct variable.
Also added some comments to sdksyms.sh, for the reason it generates
the "symbol table" and add a message to the generated file, telling
is was automatically generated.
The kbd driver may send events during device initialisation, and these events
need the EQ set up already.
X.Org Bug 18890 <http://bugs.freedesktop.org/show_bug.cgi?id=18890>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
As suggested by Julien Cristau
This is an follow-up to
commit 9c5dd7337f
Author: Peter Hutterer <peter.hutterer@redhat.com>
Date: Wed Dec 3 14:24:25 2008 +1000
Let the DDX decide on the XkbRulesDefaults.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Acked-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
drv and idev are only set for SDs, but are only dereferenced for SDs too, so
initializing them to NULL is safe.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
It is declared as
<hash>ifdef HAVE_ACPI
Bool xf86acpiDisableFlag = FALSE;
<hash>endif
in hw/xfree86/common/xf86Globals.c
but not protected by the ifdef in the sdk header xf86Priv.h, what
caused a build failure in the tinderbox, due to the address of the
symbol being taken (to ensure it is available) in sdksyms.c.
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
Those tables were once used to decide what symbols are visible to
modules, but they were outdated. The only real usage was that, since
it was taking the address of symbols, linkage should fail if the
symbols were not available.
Now the proper way to make symbols available to modules should
be to use the _X_EXPORT macro, or not compile with hidden symbols,
so that all symbols would be available.
All symbols in the tables were revised to ensure they are exported,
and only symbols that were not exported are ClientSleepUntil() and
DuplicateModule(), that were not in the sdk for quite some time
already, and should not have any users outside of the X Server
(and/or builtin modules).
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Rather than assuming rules in the CoreKeyboardProc, init the default rules in
InitCoreDevices, then re-use them later.
In the xfree86 DDX, set the rules to "base" or "evdev", depending on whether
we'll load kbd or evdev.
If we create a new MD, use pc105,us as default and re-use the rules file used
previously.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Just ignore devices after MAXDEVICES has been reached, but warn the user that
the devices are ignored.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The warnings corrected were only the ones that should correct
real problems. The most common one is 64 bit integers as
"printf %l" arguments.
Note that there is a patch related to this at:
http://bugs.freedesktop.org/show_bug.cgi?id=18204
These symbols were removed from the X Server, or never declared.
One symbol that may need special attention is XkbBuildCoreState(),
that doesn't have a prototype anywhere, but is called from
xkb/xkbEvents.c:XkbFilterEvents(), and also used by the macros
XkbStateFieldFromRec() and XkbGrabStateFromRec() defined in
include/xkbstr.h.
fb/wfbrename.h also may need some cleanup, as it makes several
"renames" of non existing symbols.
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
This patch exports all symbols required by the compilable
(in a x86 linux computer) xorg/driver/* modules.
Still missing symbols worth mentioning are:
sunleo
miFindMaxBand no longer available
intel (uxa/uxa-accel.c)
fbShmPutImage no longer available (and should have been static)
mga
MGAGetClientPointer (should come from matrox's libhal)
This is not a definitive "visibility" patch, as all it does is to
export missing symbols, but the modules that current don't compile,
may require more symbols once fixed, and third party drivers should
also require more symbols exported.
A "definitive" patch should export symbols defined in the sdk.
Includes fixes for:
"xf86Config.c", line 2434: warning: argument #1 is incompatible with prototype:
prototype: pointer to struct _DisplayModeRec: "xf86.h", line 351
argument : pointer to const struct _DisplayModeRec
"xf86EdidModes.c", line 312: warning: argument #1 is incompatible with prototype:
prototype: pointer to struct _DisplayModeRec: "../../../hw/xfree86/common/xf86.h", line 351
argument : pointer to const struct _DisplayModeRec
"xf86EdidModes.c", line 438: warning: assignment type mismatch:
pointer to struct _DisplayModeRec "=" pointer to const struct _DisplayModeRec
"xf86Modes.c", line 701: warning: assignment type mismatch:
pointer to struct _DisplayModeRec "=" pointer to const struct _DisplayModeRec
The xfree86 server previously hat NewInputDeviceRequest and InitInput, and
both basically did the same thing. Reduce NIDR to parameter checking and use
xf86NewInputDevice from both InitInput and NIDR to actually create the device.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There's little chance that we'll get the input devices at runtime without HAL,
we might as well force the server to add mouse/kbd devices automatically -
just like in the olden days.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
These values need not be constrained to integer values.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
As reported in http://bugs.freedesktop.org/show_bug.cgi?id=18438
the server suggests reconfiguring HAL if AllowEmptyInput is enabled
and no input devices are known.
Instead of that notice, if HAL is disabled at configure time,
AllowEmptyInput is enabled in the config and no input devices are
found report those facts and recommend disabling AllowEmptyInput.
When setting the depth to 24, leave bpp unset so the logic to pick
a supported value is used instead of ignoring the driver's preference
and forcing 32 bpp.
Maybe one day I stop doing stupid patches like
a3a7c12fcf.
So, if X < low, reset to low, and _not_ to high.
If X > high, reset to high, and _not_ to low.
This consists of two parts:
In the implicit server layout, ignore those drivers when looking for a core
device.
And after finishing the server layout, run through the list of devices and
remove any that use mouse or kbd.
AEI is mutually exclusive with the kbd and mouse drivers, so pick either - or.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The precedence of == is higher than that of &, so that code was
probably buggy.
xf86Init.c: In function 'DoModalias':
xf86Init.c:300: warning: suggest parentheses around comparison in operand of &
xf86Init.c:304: warning: suggest parentheses around comparison in operand of &
xf86Init.c:308: warning: suggest parentheses around comparison in operand of &
xf86Init.c:136: warning: function declaration isn't a prototype
xf86Init.c:243: warning: function declaration isn't a prototype
xf86Init.c:249: warning: function declaration isn't a prototype
Add missing includes to fix the following warnings:
xf86DGA.c: In function 'DGAProcessKeyboardEvent':
xf86DGA.c:1050: warning: implicit declaration of function 'UpdateDeviceState'
xf86DGA.c:1050: warning: nested extern declaration of 'UpdateDeviceState'
xf86Xinput.c: In function 'xf86ActivateDevice':
xf86Xinput.c:303: warning: implicit declaration of function 'AssignTypeAndName'
xf86Xinput.c:303: warning: nested extern declaration of 'AssignTypeAndName'
xf86Xinput.c:311: warning: implicit declaration of function 'DeviceIsPointerType'
xf86Xinput.c:311: warning: nested extern declaration of 'DeviceIsPointerType'
xf86Xinput.c:324: warning: implicit declaration of function 'XkbSetExtension'
xf86Xinput.c:324: warning: nested extern declaration of 'XkbSetExtension'
Add automatic detection of the graphic driver to load for sbus devices.
This allows xorg to work on those devices without a "Device" section.
Debian bug#483942.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Also set AutoAddDevices and AutoEnableDevices to their defaults.
And in doing so, switch the rest of the defaults over to named intializers.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
NIDR should be used to create a new SD from e.g. within a driver.
DIDR should be used to remove a device from the server.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
If you need to bail out the server, use Ctrl-Alt-Fx, or enable zapping
if it bothers you that much. If Ctrl-Alt-Fx is broken, nag me until
it's permanently fixed.
The nvidia driver currently uses these hooks to work around problems where RAC
will disable access to the hardware at unexpected times. This change restores
these hooks until we can come up with a better API for working around RAC.
This reverts commit c1df4fbede.
The nvidia driver currently uses these callbacks to work around problems where
RAC will disable access to the hardware at unexpected times. This change
restores these hooks until we can come up with a better API for working around
RAC.
This reverts commit d7c0ba2e9e.
Conflicts:
hw/xfree86/loader/xf86sym.c
If anyone can come up with an example of a bus where:
- both i/o and memory resources are addressable
- access to them can be controlled
- but they can't be controlled independently
then by all means, reinstate this logic.
No point warning about missing driver hooks, that just means the person
who gave you the driver is inept. Might as well just crash. Also,
just name anonymous screens as screen%d instead of failing after the 36th
screen. Bonus points if you can figure out what the failure mode would
be on the 36th screen, and what the effective screen limit was.
This code was effectively only used in ix86Pci.c to select PCI config
access type. Nobody should be using that path anymore, in the glorious
pciaccess world; kernel services should get it right for you.
the defaults from InitVelocityData() or hypothetic driver-side changes
are now respected, not overridden.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the device doesn't have any BARs then it's just a stub for some
lame operating systems that need one PCI device per output for
multihead. No point in warning about it.
It's all a bit wonky since both sis(4) and xgi(4) claim to support the
Volari Z7 and V5/8 (0x0020 and 0x0040), so let's side with xgi(4), why
not. Note that the V3 (not V3XT) identifies itself as a trident chip.
Put out a warning if xorg.conf has InputDevice sections, but these aren't
referenced in the used ServerLayout. This is only performed if AllowEmptyInput
is enabled.
The reason behind this is that the server used to auto-add the first
mouse/keyboard sections if none where referenced. Now, with HAL and AEI
enabled by default, setups that relied on this auto-adding break and are left
without input devices. The least we can do is warn them.
- Use a single common function to compute reducedness.
- Call it from both the old-school and new-school mode validation paths.
- Define monitor reduced-blanking support in accord with EDID 1.4.
- Attempt to filter RB DMT modes away from the "standard" EDID pool if
the monitor doesn't claim RB support.
OsInitColors always just returned TRUE, so just remove calls to it and
insane special-case logic. Remove unused kcolor.c implementation, and
merge oscolor.h into oscolor.c since it was the only user. Remove
open-coded strncasecmp in oscolor.c.
Since we no longer need to call OsInitColors after reading the config
file, just call PostConfigInit() from one place, and move PM handling to
one place so we can install the signal handlers earlier.
If devices are prepended to the list, their wake-up order on resume is not the
same as the original initialisation order. Hot-plugged devices, originally
inited last, are re-enabled before the xorg.conf devices and in some cases may
steal the device files. Result: we have different devices before and after
suspend/resume.
RedHat Bug 439386 <https://bugzilla.redhat.com/show_bug.cgi?id=439386>
- Allow returning multiple drivers to try for a given PCI id (for instance,
try "geode" then "amd" for AMD Geode hardware)
- On Solaris, use VIS_GETIDENTIFIER ioctl as well as PCI id to choose drivers
- Use wsfb instead of fbdev as a fallback on non-Linux SPARC platforms
Remove AEI check from configImpliedLayout as the setting isn't actually parsed
at this point anyway (written by Sasha Hlusiak).
Resurrect checkInput() and check for devices there if AEI is false (this also
creates the default devices if required).
Set AllowEmptyInput to enabled by default if hotplugging is enabled.
If no Screen is specified in the ServerLayout section, either take the first
one from the config file or autogenerate a default screen.
X.Org Bug 16301 <http://bugs.freedesktop.org/show_bug.cgi?id=16301>
RandR 1.1 has a physical size for each mode. It used to be that the DIX would
remember these modes and pass them back up to the DDX when changing the screen
configuration. The DDX uses RR_GET_MODE_MM to query the driver for the physical
dimensions of the screen, allowing it to preserve the DPI.
With RandR 1.2, the physical dimensions are stored as part of the output, rather
than per mode. The DIX only uses the sizes passed in from the DDX to select the
mode pool for the "default" output, and forgets the physical sizes. Then, when
reconfiguring the screen, it makes up a new RRScreenSizeRec using the dimensions
from the output, screwing up the DPI.
This change works around this problem by ignoring the DIX and querying the real
size from the driver.
Alexandr Shadchin
Peter Hutterer
Daniel Stone
Keith Packard
Aaron Plattner
Alan Coopersmith
Jamey Sharp
Lennart Poettering
Daniel Kurtz
Simon Thum
Oleh Nykyforchyn
Tiago Vignatti
Dave Airlie
Christopher James Halse Rogers
Erkki Seppälä
Adam Jackson
Matthieu Herrb
Cyril Brulebois
Pauli Nieminen
Ville Syrjala
Ville Syrjälä
Chase Douglas
James Jones
Olivier Fourdan
Chris Wilson
Macpaul Lin
Jesse Adkins
Matt Turner
Mikhail Gusarov
Dan Nicholson
Julien Cristau
Jeremy Huddleston
Pierre-Loup A. Griffais
Benjamin Tissoires
Ruediger Oertel
Oliver McFadden
Rami Ylimaki
Soeren Sandmann
Alan Coopersmith
Aaron Zang
Luc Verhaegen
Gaetan Nadon
Chase Douglas
Ma Ling
Hans Nieser
Marcin Baczyński
Martin Ettl
Martin-Éric Racine
Rémi Cardona
Dave Airlie
Michel Dänzer
Matthias Hopf
Felix Kuehling
Søren Sandmann Pedersen
Dave Airlie
Benjamin Close
Eamon Walsh
Ander Conselvan de Oliveira
Winfried Grünewald
Tomas Carnecky
Topi Kanerva
Adam Tkac
Maarten Maathuis
Paulo Cesar Pereira de Andrade
Peter Hutterer
Timo Aaltonen
Jay Cotton
Stefan Dirsch
James Cloos
Bernhard R. Link
Nathaniel McCallum
Tiago Vignatti
Eric Anholt
Kristian Høgsberg
Mathieu Bérard
Jie Luo
Peter Hutterer