Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If windowsdriproto headers are available, build a Windows-DRI extension,
which supports requests to enable local clients to directly render GL to a
Windows drawable:
- a query to check if WGL is being used on a screen
- a query to map a fbconfigID to a native pixelformatindex
- a query to map a drawable to a native handle
Windows-DRI can only be useful if we are using WGL, so make an note if WGL
is active on a screen.
Make validGlxDrawable() public
Adjust glxWinSetPixelFormat() so it doesn't require a context, just a
screen and config.
That enables factoring out the deferred drawable creation code as
glxWinDeferredCreateDrawable()
Enhance glxWinDeferredCreateDrawable(), so that pixmaps are placed into a
file mapping, so they exist in memory which can be shared with the direct
rendering process.
Currently, this file mapping is accessed by a name generated from the XID.
This will not be unique across multiple server instances. It would perhaps
be better, although more complicated, to use an anonymous file mapping, and
then duplicate the handle for the direct rendering process.
Use glxWinDeferredCreateDrawable() to ensure the native handle exists for
the Windows-DRI query to map a drawable to native handle.
v2:
Various printf format warning fixes
v3:
Fix format warnings on x86
Move some uninteresting windows-dri output to debug log level
v4:
check for windowsdriproto when --enable-windowsdri
use windowsdriproto_CFLAGS
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Autoconf logic borrowed from glib
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
This is a preparation patch for adding prime hw-cursor support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
poll provides per-fd notification of failure, so we don't need
CheckConnections anymore.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
There's no reason not to offer ridiculous numbers of clients; only a
few static data structures are arrays of this length.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Eliminates all of the fd_set mangling in the server main thread
v2: Listen for POLLOUT while writes are blocked.
v3: Only mark client not ready on EAGAIN return from read
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This converts the dispatch loop into using a list of ready clients
instead of an array. This changes the WaitForSomething API so that it
notifies DIX when a client becomes ready to read, instead of returning
the set of ready clients.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This provides a wrapper around poll or epoll providing a
callback-based interface for monitoring activity on a large set of
file descriptors.
v2: use xserver_poll API instead of poll. Don't use WSAPoll as
that is broken.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: rename as 'xserver_poll' to avoid potential library name
collisions. Provide 'xserver_poll.h' which uses the system
poll where available and falls back to this emulation otherwise.
Autodetects when this is required, building the emulation only
then
Source: https://github.com/bmc/poll
Signed-off-by: Adam Jackson <ajax@redhat.com>
This provides a way to report errors on file descriptors that is
better defined than "any bits which are not READ or WRITE".
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The timeout resolution offered in the AdjustWaitForDelay call is
only milliseconds, so passing around the timeout as a pointer to a
struct timeval is not helpful. Doing everything in milliseconds up to
the point of the select call simplifies the code without affecting
functionality at all.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
All uses of these interfaces should instead be using the NotifyFd API
instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes the last uses of fd_set from the server interfaces
outside of the OS layer itself.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With no users of the interface needing the readmask anymore, we can
remove it from the argument passed to these functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This new libXfont API eliminates exposing internal X server symbols to
the font library, replacing those with a struct full of the entire API
needed to use that library.
v2: Use libXfont2 instead of libXfont_2
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds typedefs for (*RRStartFlippingPixmapTrackingProcPtr),
(*RREnableSharedPixmapFlippingProcPtr),
and (*RRDisableSharedPixmapFlippingProcPtr) in randrstr.h.
Adds typedefs for (*PresentSharedPixmapProcPtr),
(*SharedPixmapNotifyDamageProcPtr),
(*RequestSharedPixmapNotifyDamageProcPtr), and
(*StopFlippingPixmapTrackingProcPtr) in scrnintstr.h.
Adds RR(Enable/Disable)SharedPixmapFlipping, and
RRStartFlippingPixmapTracking to rrScrnPrivRec.
Adds StopFlippingPixmapTracking, PresentSharedPixmap,
SharedPixmapNotifyDamage, and RequestSharedPixmapNotifyDamage to ScreenRec.
rrScrnPrivRec used for functions that use RandR-private data types, and
ScreenRec used for the rest.
RREnableSharedPixmapFlipping will allow the sink driver to setup for
flipping between two shared pixmaps.
RRDisableSharedPixmapFlipping will allow the sink driver to do teardown
associated with flipping between two shared pixmaps.
(RRStart/Stop)FlippingPixmapTracking are merely the double-buffered
equivalents of (Start/Stop)PixmapTracking, allowing the source driver to do
whatever setup and teardown necessary for presenting on the two shared
pixmaps.
PresentSharedPixmap is a function exposed by the source driver for the X
server or sink driver to call to request a present on a given shared
pixmap. This way, presents can be driven by the sink's vblank instead of a
timer or similar mechanism.
SharedPixmapNotifyDamage and RequestSharedPixmapNotifyDamage are OPTIONAL
(even for double-buffered PRIME) functions exposed by the sink driver and
the source driver, respectively. By calling
master->RequestSharedPixmapNotifyDamage(ppix), the sink driver can request
for the source driver to call slave->SharedPixmapNotifyDamage(ppix) in
response to damage on the master screen pixmap tracked by ppix.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
Add SharedPixmapNotifyDamage / RequestSharedPixmapNotifyDamage
v3: Add RRCrtcPtr as a parameter to StartFlippingPixmapTracking
Move functions that use RandR-private data types to rrScrnPrivRec.
v4: Unchanged
v5: Add front and back parameters to RREnableSharedPixmapFlippingProcPtr
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
A new --with-fallback-input-driver=foo option allows selecting a
fallback driver for the server if the driver configured for the device
is not found. Note that this only applies when the device has a driver
assigned and that module fails to load, devices without a driver are
ignored as usual.
This avoids the situation where a configuration assigns e.g. the
synaptics driver but that driver is not available on the system,
resulting in a dead device. A fallback driver can at least provides some
functionality.
This becomes more important as we move towards making other driver true
leaf nodes that can be installed/uninstalled as requested. Specifically,
wacom and synaptics, a config that assigns either driver should be
viable even when the driver itself is not (yet) installed on the system.
It is up to the distributions to make sure that the fallback driver is
always installed. The fallback driver can be disabled with
--without-fallback-input-driver and is disabled by default on non-Linux
systems because we don't have generic drivers on those platforms.
Default driver on Linux is libinput, evdev is the only other serious
candidate here.
Sample log output:
[ 3274.421] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 3274.421] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad weird driver"
[ 3274.421] (II) LoadModule: "banana"
[ 3274.422] (WW) Warning, couldn't open module banana
[ 3274.422] (II) UnloadModule: "banana"
[ 3274.422] (II) Unloading banana
[ 3274.422] (EE) Failed to load module "banana" (module does not exist, 0)
[ 3274.422] (EE) No input driver matching `banana'
[ 3274.422] (II) Falling back to input driver `libinput'
.. server proceeds to assign libinput, init the device, world peace and rainbows
everywhere, truly what a sight. Shame about the banana though.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is an ABI break, in that we now pass NULL to a function that hasn't
accepted it before.
Alex Goins had a different patch for this but it wasn't symmetrical, it
freed something in a very different place than it allocated it, this
attempts to retain symmetry in the releasing of the backing bo.
v2: use a new toplevel API, though it still passes NULL to something
that wasn't expecting it.
v3: pass -1 instead of 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Goins <agoins at nvidia.com>
As the man page for the latter states:
The effects of signal() in a multithreaded process are unspecified.
We already have an interface to call sigaction() instead, use it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The xserver generates the key repeat by itself.
But when used with another server processing inputs first (e.g. a
Wayland compositor), the other server may be busy dealing with some
other things and not queue up key release events in time.
Add a vfunc in XkbSrvInfo to possibly add a check before re-emitting a
keypress event in the AccessX timer handler, so that the key repeat has
a chance to be denied if the server processing the input is not ready.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
By default the X server will try CLOCK_MONOTONIC_COARSE before
CLOCK_MONOTONIC, while A Wayland compositor may only support getting
their timestamps from the CLOCK_MONOTONIC clock. This causes various
issues since it may happen that a timestamp from CLOCK_MONOTONIC
retrieved before a sending an X request will still be "later" than the
timestamp the X server than gets after receiving the request, due to the
fact that CLOCK_MONOTONIC_COARSE has a lower resolution.
To avoid these issues, make Xwayland always use CLOCK_MONOTONIC, so
that it becomes possible for Wayland compositor only supporting
CLOCK_MONOTONIC and X server to use the same clock.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The current SIGIO signal handler method, used at generation of input events,
has a bunch of oddities. This patch introduces an alternative way using a
thread, which is used to select() all input device file descriptors.
A mutex was used to control the access to input structures by the main and input
threads. Two pipes to emit alert events (such hotplug ones) and guarantee the
proper communication between them was also used.
Co-authored-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
v2: Fix non-Xorg link. Enable where supported by default.
This also splits out the actual enabling of input threads to
DDX-specific patches which follow
v3: Make the input lock recursive
v4: Use regular RECURSIVE_MUTEXes instead of rolling our own
Respect the --disable-input-thread configuration option by
providing stubs that expose the same API/ABI.
Respond to style comments from Peter Hutterer.
v5: use __func__ in inputthread debug and error mesages.
Respond to style comments from Peter Hutterer.
v6: use AX_PTHREAD instead of inlining pthread tests.
Suggested by Emil Velikov <emil.l.velikov@gmail.com>
v7: Use pthread_sigmask instead of sigprocmask when using threads
Suggested by Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When NumLock is on and a new keymap is applied, the next modifier state
change will turn off that LED (but leave the state enabled). The cause
for this is a bit convoluted:
* the SLI explicitState is copied from the current state in
ProcXkbGetKbdByName. Thus, if NumLock is on, that state is 0x2.
* on the next modifier key press (e.g. Shift), XkbApplyState() calls into
XkbUpdateIndicators() -> XkbUpdateLedAutoState() to update SLIs (if any)
for the currently changed modifier. But it does so with a mask only for
the changed modifier (i.e. for Shift).
* XkbUpdateLedAutoState() calculates the state based on this mask and
ends up with 0 because we don't have a Shift LED and we masked out the
others.
* XkbUpdateLedAutoState() compares that state with the previous state
(which is still 0x2) and then proceeds to turn the LED off
This doesn't happen in the normal case because either the mask
encompasses all modifiers or the state matches of the masked-out
modifiers matches the old state.
Avoid this issue by forcing an SLI update after changing the keymap.
This updates the sli->effectiveState and thus restores everything to
happy working order.
https://bugzilla.redhat.com/show_bug.cgi?id=1047151
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The tablet pads have been separate kernel devices for a while now and
libwacom has labelled them with the udev ID_INPUT_TABLET_PAD for over a year
now. Add a new MatchIsTabletPad directive to apply configuration options
specifically to the Pad part of a tablet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We had HAVE_POSIX_FALLOCATE checks, but no such macros were ever
defined anywhere. This commit makes it so that this macro is defined if
the posix_fallocate is detected during configure.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
git commit f175cf45:
vidmode: move to a separate library of its own
introduced a regression where the xserver would not build when
xf86vidmodeproto is not installed even if the configure option
"--disable-xf86vidmode" is specified.
Fix build failure when xf86vidmodeproto is not installed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This patch introduces a new flag ATTR_KEY for hotplugged input devices,
so we can better distinguish between real keyboards (i.e. devices with
udev property ID_INPUT_KEYBOARD="1") and other key input devices like
lid switches, power buttons, etc.
All supported hotplug backends (udev, hal, and wscons) will set both
flags ATTR_KEY and ATTR_KEYBOARD for real keyboards, but udev backend
will set ATTR_KEY, but not ATTR_KEYBOARD, for non-keyboard key input
devices (hal and wscons will set both flags in any case). With this
distinction, kdrive input hotplugging mechanism will be allowed to only
grab real keyboards, as other key input devices are currently not
supported.
In order to don't break current behaviour, this patch will replace all
ATTR_KEYBOARD occurrences with ATTR_KEY in hw/xfree86/common/xf86Xinput.c.
[ajax: Just add ATTR_KEY, don't re-number the other attributes]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
XVidMode extension might be useful to non hardware servers as well (e.g.
Xwayand) so that applications that rely on it (e.g. lot of older games)
can at least have read access to XVidMode.
But the implementation is very XFree86 centric, so the idea is to add
a bunch of vfunc that other non-XFree86 servers can hook up into to
provide a similar functionality.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87806
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
To be able to reuse the VidMode extension in a non-hardware server, the
display mode definitions need to be accessible from DIX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This is a variant of ClientSignal() that signals all clients with an
optional matching sleeping client, function and closure.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: Move initializing pos into the first clause of the for statement. We
have to keep this macro equivalent to a plain for statement from the
user's perspective, otherwise callers need to {} things to keep control
flow correct. [ajax]
Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=93212
Previously all X servers started with -displayfd would overwrite
Xorg.0.log - now a temporary name of Xorg.pid-<pid>.log is used
until after -displayfd finds an open display - then it is renamed
to the traditional Xorg.<display>.log name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Replace the custom path for dealing with new incoming connections with
the general-purpose NotifyFd API.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This provides a callback-based interface to monitor file
descriptors beyond the usual client and device interfaces.
Modules within the server using file descriptors for reading and/or
writing can call
Bool SetNotifyFd(int fd, NotifyFdProcPtr notify_fd, int mask, void *data);
mask can be any combination of X_NOTIFY_READ and X_NOTIFY_WRITE.
When 'fd' becomes readable or writable, the notify_fd function will be
called with the 'fd', the ready conditions and 'data' values as arguments,
When the module no longer needs to monitor the fd, it will call
void RemoveNotifyFd(int fd);
RemoveNotifyFd may be called from the notify function.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows the server to call GetTimeInMillis() after each request is
processed to avoid needing setitimer. -dumbSched now turns off the
setitimer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a new event source type for keypress events synthesised from focus
notifications (e.g. KeymapNotify from the parent server, when running
nested). This is used to keep the keys-down array in sync with the host
server's, without sending actual keypress events to clients.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a flag to DeviceEvents, giving the source of the event. Currently
this only supports a 'normal' flag, but will be used later to add a
'focus-in' flag, noting events synthesised from key/button arrays on
focus-in notifications.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Michael Stapelberg <stapelberg@google.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's nothing in configure to enable this, and KdTsPhyScreen isn't
defined anywhere.
[ajax: Rebase, also clean up Xfbdev]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
These extensions were accessing internal OS functions and
structures. Expose the necessary functionality to them and remove
their use of osdep.h
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 4b4b9086 "os: support new implicit local user access mode [CVE-2015-3164
2/3]" carefully places the relevant code it adds under !NO_LOCAL_CLIENT_CRED,
but unfortunately doesn't notice that NO_LOCAL_CLIENT_CRED is defined as a
side-effect in the middle of GetLocalClientCreds(), so many of these checks
precede its definition.
Move the check if NO_LOCAL_CLIENT_CRED should be defined to configure.ac, so it
always occurs before it's first use.
v2:
Move check to configure.ac
v3:
Use AC_CACHE_CHECK and name cache varaible appropriately
[ajax: Massaged commit message]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Ray Strode <rstrode@redhat.com>
ResourceClientBits() might be used by the modules as well, need to
mark the symbol as visible to that the linker can resolve it at
run time.
/usr/bin/X: symbol lookup error:
/usr/lib64/xorg/modules/extensions/libglx.so: undefined symbol:
ResourceClientBits
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91763
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Make the maximum number of clients user configurable, either from the command
line or from xorg.conf
This patch works by using the MAXCLIENTS (raised to 512) as the maximum
allowed number of clients, but allowing the actual limit to be set by the
user to a lower value (keeping the default of 256).
There is a limit size of 29 bits to be used to store both the client ID and
the X resources ID, so by reducing the number of clients allowed to connect to
the X server, the user can increase the number of X resources per client or
vice-versa.
Parts of this patch are based on a similar patch from Adam Jackson
<ajax@redhat.com>
This now requires at least xproto 7.0.28
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This eliminates the duplicate declaration of dixGetGlyphs when
fontutil.h gets included after dixfont.h has defined GetGlyphs as
dixGetGlyphs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Removes the last cpp conditional on ROOTLESS from dix code.
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We need this for doing USB offload scenarios using glamor
and modesetting driver.
unfortunately only gbm in mesa 10.6 has support for the
linear API.
v1.1: fix bad define
v2: update the configure.ac test as per amdgpu. (Michel)
set linear bos to external to avoid cache. (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I doubt anyone builds with this turned off or has done for a long
time.
It helps my eyes bleed slightly less when reading the code, I've left
the define in place as some drivers use it.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If the X server is started without a '-auth' argument, then
it gets started wide open to all local users on the system.
This isn't a great default access model, but changing it in
Xorg at this point would break backward compatibility.
Xwayland, on the other hand is new, and much more targeted
in scope. It could, in theory, be changed to allow the much
more secure default of a "user who started X server can connect
clients to that server."
This commit paves the way for that change, by adding a mechanism
for DDXs to opt-in to that behavior. They merely need to call
LocalAccessScopeUser()
in their init functions.
A subsequent commit will add that call for Xwayland.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Allows a mask to carry both accelerated and unaccelerated motion at the same
time.
This is required for xf86-input-libinput where the pointer acceleration
happens in libinput already, but parts of the server, specifically raw events
and DGA rely on device-specific unaccelerated data.
To ease integration add this as a second set to the ValuatorMask rather than
extending all APIs to carry a second, possibly NULL set of valuators.
Note that a valuator mask should only be used in either accel/unaccel or
standard mode at any time. Switching requires either a valuator_mask_zero()
call or unsetting all valuators one-by-one. Trying to mix the two will produce
a warning.
The server has a shortcut for changing a mask with the
valuator_mask_drop_unaccelerated() call. This saves us from having to loop
through all valuators on every event, we can just drop the bits we know we
don't want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Without this, AC_SYS_LARGEFILE doesn't actually have any effect.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Make sure X_BIG_ENDIAN/X_LITTLE_ENDIAN are defined before actually using
them.
Otherwise, image byte order could be wrong on big endian hardware even
though endianess detection is correct.
Reported-by: Tim Waugh <twaugh@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Uses reallocarray to perform integer overflow detection when allocating
an array, using NULL as the previous pointer to force a new allocation.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Wrapper for realloc() that checks for overflow when multiplying
arguments together, so we don't have to add overflow checks to
every single call. For documentation on usage, see:
http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man3/calloc.3
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Matt Turner <mattst88@gmail.com>
The xnfcalloc() macro took two arguments but simply multiplied them
together without checking for overflow and defeating any overflow
checking that calloc() might have done. Let's not do that.
The original XNFcalloc() function is left for now to preserve driver
ABI, but is marked as deprecated so it can be removed in a future round
of ABI break/cleanup.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Store the user-defined monitors in the RandR screen private.
Generate a list of monitors from both the user-defined ones and from
any outputs not mentioned in one of the user-defined monitors. This list
covers both the outputs in the main screen as well as any slaves.
v1.1: airlied: fix up primary skipping bug,
fix wrong height initialiser
add get_active flag from updated protocol.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No longer used with the removal of the GL dispatch (glapi) from libglx a
few releases ago.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Make PseudoramiXExtensionInit() prototype available to hw/xwin
Rather than avoiding a reference to it being pulled in to Xorg by sdksyms by
hiding this prototype behind the INXQUARTZ define, which is only defined when
building Xquartz, introduce nonsdk_extinit.h and move it there.
(The only remaining use of INXQUARTZ is in mi/miiniext.c, in order
to do PseudoramiXExtensionInit() at the point apparently needed by Xquartz)
Also remove duplicate declaration of noPseudoramiXExtension from pseudoramiX.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Add _X_EXPORT to GetMaster function. It is required by tigervnc's VNC module.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Nothing was using it and if anyone had they would've gotten a warning and
noticed that it doesn't actually work. Drop this, it has been unused for years.
Input ABI 22
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Use typedefs to work around dtrace dropping const qualifiers from probe
arguments when generating Xserver-dtrace.h. Add new probes.h header to
avoid having to replicate these typedefs in every file with dtrace probes.
Gets rid of these warnings from gcc 4.8:
getevents.c:1096:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' discards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1096:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1651:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1651:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1791:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1791:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1921:9:
warning: passing argument 6 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
getevents.c:1921:9:
warning: passing argument 7 of '__dtrace_Xserver___input__event' disards
'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The CVE fix in:
commit 97015a07b9
Author: Alan Coopersmith <alan.coopersmith@oracle.com>
Date: Wed Jan 22 22:37:15 2014 -0800
dix: integer overflow in RegionSizeof() [CVE-2014-8092 3/4]
offended the C++ demons:
../../include/regionstr.h:147:45: error: invalid conversion from 'void*' to
'pixman_region16_data_t* {aka pixman_region16_data*}' [-fpermissive]
Normally this isn't a problem, because around here we have the sense and
common decency to not use C++, but this does make tigervnc fail to build,
which is a little rude of us.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The 'n' parameter must be surrounded by parens in both places to
prevent precedence from mis-computing things.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Multiple functions in the Xinput extension handling of requests from
clients failed to check that the length of the request sent by the
client was large enough to perform all the required operations and
thus could read or write to memory outside the bounds of the request
buffer.
This commit includes the creation of a new REQUEST_AT_LEAST_EXTRA_SIZE
macro in include/dix.h for the common case of needing to ensure a
request is large enough to include both the request itself and a
minimum amount of extra data following the request header.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Force use of 64-bit integers when evaluating data provided by clients
in 32-bit fields which can overflow when added or multiplied during
checks.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
RegionSizeof contains several integer overflows if a large length
value is passed in. Once we fix it to return 0 on overflow, we
also have to fix the callers to handle this error condition
v2: Fixed limit calculation in RegionSizeof as pointed out by jcristau.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
/usr/include/xorg/regionstr.h:130:36: warning: implicit conversion changes
signedness: 'int' to 'unsigned long' [-Wsign-conversion]
return (sizeof(RegDataRec) + ((n) * sizeof(BoxRec)));
^ ~
Really only just pushes the problem to the caller, but maybe that motivates
someone to fix it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
/usr/include/xorg/misc.h:141:30: warning: implicit conversion loses integer
precision: 'int' to 'uint16_t' (aka 'unsigned short') [-Wconversion]
return ((x & 0xff) << 8) | ((x >> 8) & 0xff);
~~~~~~ ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
Function sig is a uint16_t, so just force the cast.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Again, this changes FixesCreateRegionFromGC to throw BadMatch when fed a
GC with no client clip.
v2: Fix Xnest and some variable names (Keith)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
make -j 8 check was sporadically failing in different xi2 tests.
After adding the asserts in the previous commit to catch xkb failure
it became easier to catch the failures and see that multiple tests
were running at once trying to write to /tmp/server-(null).xkm and
then delete it, and interfering with each other.
Putting a unique string into the display variable let them each write
to their own file and not interfere with others.
v2: Fix Linux bits:
Add #include <errno.h> to get a declaration of
program_invocation_name on Linux.
Use only the last portion of the pathname so that the resulting
display name doesn't contain any slashes.
v3: use program_invocation_short_name on Linux
This is the same as program_invocation_name, except is has
stripped off any path prefix.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No DDX is overriding this and it's fairly absurd to expose it as a
screen operation anyway.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
A careful read shows that it was always NULL. It hasn't always been; as
the DDX spec indicates, it was the "occluded region that has backing
store", but since that backing store code is long gone, we can nuke it.
mi{,Overlay}WindowExposures get slightly simpler here, and will get even
simpler in just a moment.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This disables the tcp listen socket by default. Then, it
uses a new xtrans interface, TRANS(Listen), to provide a command line
option to re-enable those if desired.
v2: Leave unix socket enabled by default. Add configure options.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The dtrace code in the server wants to log the name of each executed
request, which it gets from the registry. Use that as an additional
indication of when that portion of the registry should be included in
the server build.
See:
http://tinderbox.x.org/builds/2014-09-19-0003/logs/xserver/#build
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>
Instead of making the inclusion of the registry code a global
conditional, split the registry into two pieces; the bits required by
the X-Resource extension (the resource names) and the bits required by
the XCSECURITY extension (the protocol names). Build each set of code
if the related extension is being built.
v2: Check for both XCSECURITY and XSELINUX.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Don't leave this file open during the whole server execution process;
close it once all of the extensions are initialized.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
pciaccess does this for us, and none of our internal hooks really
remain. This does remove a cleanup pass from the BSD code, but the case
it's covering (a previous server leaving MTRRs around) can't happen
anymore.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
For doing reverese optimus to multiple outputs on a secondary GPU
the GPU can store the blits into a large screen pixmap, unfortunately
this means we need a destination offset into the dirty code, so
add a new API that just adds this interface.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Drivers don't get to use dix-config.h, they use xorg-server.h
instead. Add X_BYTE_ORDER to that file so drivers can see the value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Now that servermd.h depends on X_BYTE_ORDER being defined in
dix-config.h or xorg-server.h, check to make sure one of those has
been included before using the value.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
A few files in the server are including xorg-server.h, which is only
for use by Xorg server drivers. This fixes those errors and then adds
a check to make sure it doesn't happen again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The comment lies, shm hasn't used this code since:
commit fdef7be5c8
Author: Alan Coopersmith <alan.coopersmith@sun.com>
Date: Tue Oct 9 18:44:04 2007 -0700
Sun bug 6589829: include zoneid of shm segment in access [...]
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
At this point we have no architectures where image byte order is
different from bitmap bit order, or where either of those two are not
also the native word endianness. Hooray, one more place where we don't
have to worry about enabling new CPU architectures.
v2: Rebase to master to handle the addition of ppc64le, arc, and xtensa,
and use autoconf's endianness detection instead of gcc predefines.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
I really don't think this was ever correct, but I'm also not sure what
non-Linux Unix this was meant to enable. The only one I know of was
OS/390 / z/OS / OpenEdition, but I think that was big-endian too.
At any rate this is all about to go away, so this is just removing an
edge case.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This appears to be defining sparc if ever __sparc or __sparc__ were
defined, which is almost reasonable, but these days we want to be using
the __arch__ style. Why any of this would ever be triggered on m68k is
truly a mystery for the ages.
v2: Fix commit message, as noted by nix
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This effectively no longer varied across architectures anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
These macros meant something in cfb, but not in fb.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Every other architecture sets this to 32, and I can't think of any
benefit s390 would derive from changing it. It is, at any rate,
something the client already copes with, and the only internal code
impact seems to be some complicated math in miGetPlane, which you never
hit if you're using fb.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Whatever unix this was meant to be is either no longer in circulation,
or is AIX, which we don't claim to support anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
OdevAttributes are a fixed set of values with known types; instead of
storing them in a linked list and requiring accessor/settor functions,
replace the list header, struct OdevAttributes, with a struct that
directly contains the values. This provides for compile-time
typechecking of the values, eliminates a significant amount of code
and generally simplifies using this datatype.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This adds a large comment to include/scrnintstr.h which should serve
to document the correct way to wrap any screen procedure, with a
particular focus on how to dynamically add/remove wrapping layers
while the server is running.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Even though -Wcomment doesn't mind it (in gcc or clang), the appearance
of */* confuses the syntax highlighter of some editors (eg. vim), and
causes warnings in MSVC.
Signed-off-by: Peter Harris <pharris@opentext.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Don't allow setting string attributes to integers and vice versa.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Looks like the value of ODEV_ATTRIB_DRIVER was not updated when the patch
adding it got rebased on top of a newer server version.
This fixes the xserver crashing when systemd-logind integration is used.
https://bugzilla.redhat.com/show_bug.cgi?id=1118540
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When opening a DRM device, query the version and store the driver name
as a new attribute for future reference.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Tested-By: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
So far PPC was big endian for sure. For ppc64le this is no longer
true.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
The easiest way to check for the version of an extension is to send the maximum
possible version numbers in the QueryVersion request. The X server overflows on
these as it assumes you will send a reasonable version number.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit f37a469134 removed this from
xwin-config.h.in for some reason, but it is used.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Xorg server could be built for and run on Synopsys DesignWare ARC cores.
These changes are required for successful building and execution of the server.
Both little-endian and big-endian flavors of ARC cores are supported.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Egbert Eich <eich@freedesktop.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
We can only request one fd per device from systemd-logind. If a fd is re-used
by the same device, releasing the fd from one device doesn't mean we can close
it. The systemd code knows when it's really released, so let it close the fd.
Test case: xorg.conf section for an input device with hotplugging enabled.
evdev detects the duplicate and closes the hotplugged device, which closes the
fd. The other instance of evdev thinks the fd is still valid so now you're
playing a double lottery. First, which client(s) will get the evdev fd?
Second, which requests will be picked up by evdev and which ones will be
picked up by the client? You'll never know, but the fun is in finding out.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The attack surface for indirect GLX is huge, and it's of no use to
most people (if you get an indirect GL context, you're better served
by a immediate X error than actually trying to use an indirect GL
context and finding out that it doesn't support doing anything you
want, slowly). This flag gives you a chance to disable indirect GLX
in environments where you just don't need it.
I put in both the '+' and '-' arguments right now, so that it's easy
to patch the value to change the default policy.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
GLX is trying to track whether the context it wants is current, to
avoid the glFlush() (and the rest of the overhead) that occurs on all
MakeCurrent calls. However, its cache can be incorrect now that
glamor exists. This is a step toward getting glamor to coordinate
with GLX.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This hook allows drivers to be notified when a pixmap gains a new ID.
(ABI break.)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When no logfile was specified (xf86LogFileFrom == X_DEFAULT) and we're not
running as root log to $XDG_DATA_HOME/xorg/Xorg.#.log as Xorg won't be able to
log to the default /var/log/... when it is not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This allows DDXen to override the window picking to account for
native windows not seen by the X server. The bulk of the picking logic
is exposed as a new helper function, miSpriteTrace(). This function
completes the sprite trace filled out by the caller, and can be set up
to start the search from a given toplevel window.
v2: Leave existing XYToWindow API in place for API compatibility
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Rather then a full path prefix, this is a preparation patch for adding
support for logging to another location when not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Handle -displayfd and an explicit display number sensibly, e.g. use the
explicitly specified display number, and write it to the displayfd
v2: displayfd might be 0, so use -1 as invalid value
v3: Rebase for addition of NoListenAll flag
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Looping around LoadExtension() meant that ExtensionModuleList was reallocated
on every extension. Using LoadExtensionList() we pass an array thus the
function can do the reallocation in one go, and then loop and setup the
ExtensionModuleList.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
v2: Update ephyr [Keith Packard]
v3: Eliminate const warnings in LoadExtensionList [Keith Packard]
Signed-off-by: Keith Packard <keithp@keithp.com>
Removed in d35a02a767, tigervnc 1.2.80 and
xf86-video-nested need it for now.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the Xwayland server is socket-activated, we need to connect and
initialize the window manager before the activating client gets to
proceed with connecting. We do this by passing a socket file
descriptor for the window manager connection to the Xwayland server,
which then uses this new function to set it up as an X client.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Without these, after commit fdb4ec86c2, it fails to build on Solaris,
with errors of:
xf86Xinput.c: In function 'xf86stat':
xf86Xinput.c:816:5: error: implicit declaration of function 'major' [-Werror=implicit-function-declaration]
xf86Xinput.c:817:5: error: implicit declaration of function 'minor' [-Werror=implicit-function-declaration]
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
A socket-activated server will receive its listening sockets from the
parent process and should not create its own sockets. This patch
introduces a NoListen flag that can be set by a DDX to prevent
the server from creating the sockets. When NoListen is enabled, we
also disable the server lock checking, since the parent process is
responsible for checking the lock before picking the display name and
creating the sockets.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This function was written to allow the X server to inherit the listen
socket from launchd on OS X. The code is not specific to OS X though
and will be useful for on-demand launched Xwayland servers.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
config_odev* functions are called in code-paths were we already use
XNF* functions in other places, so which are not oom safe already.
Besides that oom is something which should simply never happen, so aborting
when it does is as good a response as any other.
While switching to XNF functions also fixup an unchecked strdup case.
Note the function prototypes are kept unchanged, as they are part of the
server ABI.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With the recent systemd-logind changes it is possible to install the Xorg
binary without suid root rights and still have everything working as it
should *if* the user only has cards which are supported by kms.
This commit adds a little suid root wrapper, which is a bit weird, first we
strip the suid-root bit of the Xorg binary, and then we add a wrapper ?
The function of this wrapper is to see if a system still needs root-rights,
if it does not (it supports kms and the kms drivers are properly loaded),
then it will immediately drop all elevated rights before executing the real
Xorg binary. If it finds (some) cards which don't support kms, or no cards
at all, then it will execute the Xorg server with elevated rights so that
ie the nvidia binary driver and the vesa driver can keep working normally.
To make it possible for security concious users who don't need the root
rights to completely remove the wrapper, Xorg is started in a 3 step process
when the wrapper is enabled during build time:
1) A simple shell script which checks if the wrapper is there, if it is
it executes the wrapper, if not it directly executes the real Xorg binary
2) The wrapper gets executed, does its checks, normally drops all elevated
rights and then executes the real Xorg binary
3) The real Xorg binary does its thing
This allows distributions to put the wrapper binary in a separate package, and
will allow users to remove this package. IE the plan with Fedora is to make
"legacy" drivers depend on the wrapper pkg, and since our default install
contains some legacy drivers it will be part of the default install, but
users can later yum remove it (which will also automatically remove the
legacy driver packages as those won't work without it anyways).
The wrapper is loosely modelled after the existing Debian Xwrapper, it
uses the same config-file + config-file format, and also allows restricting
Xserver execution (through the wrapper) to console users only.
There also is a new needs_root_rights config file directive, which can
be used to override the auto-detection the wrapper does.
Hopefully this will allow Debian to replace their own wrapper with this
upstream one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This will also make it useful for cases when we have a new keymap to
apply to a device but don't have a source device.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Whenever the master changes, push the locked modifier state to the attached
slave devices, then update the indicators. This way, when NumLock or CapsLock
are hit on any device, the LED will light up on all devices. Likewise, a new
keyboard attached to a master device will light up with the correct
indicators.
The indicators are handled per-keyboard, depending on the layout, i.e. if one
keyboard has grp_led:num set, the NumLock LED won't light up on that keyboard.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
on tinderbox and irc
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is not exposing the API we want long term, but it should get
existing DDX drivers up and running while we massage the API into
shape.
v2: Use LIBADD instead of LDFLAGS to fix deps on libglamor.la, and use
version 0.5.1 (the point it was forked from the external repo).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This commits add the bulk of the systemd-logind integration code, but does
not hook it up yet other then calling its init and fini functions, which
don't do that much.
Note the configure bits check for udev since systemd-logind use will only be
supported in combination with udev. Besides that it only checks for dbus
since all communication with systemd-logind is happening over dbus, so
no further libs are needed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With systemd-logind support, the xserver, rather than the drivers will be
responsible for opening/closing the fd for drm nodes.
This commit adds a fd member to OdevAttributes to store the fd to pass it
along to the driver.
systemd-logind tracks devices by their chardev major + minor numbers, so
also add OdevAttributes to store the major and minor.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The OdevAttributes struct should just be a head of the attributes list, and
not contain various unrelated flags. Instead add a flags field to
struct xf86_platform_device and use that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Add a couple of new functions for dealing with storing integer values into
OdevAttributes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a config_odev_get_attribute helper, and replace the diy looping over all
the attributes done in various places with calls to this helper.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Caused Solaris Studio cc to complain in every file which included it:
"../include/eventstr.h", line 179: warning: syntax error:
empty member declaration
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
No functional changes, just making a better case for why MAP_LENGTH is 256.
"But can't we remove MAP_LENGTH then?" I hear you say? "Why, yes. Go for it!"
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Fallout from fecc7eb1cf, and reverts most of the
rest of that patch.
The device name is allocated and may even change during PreInit. The const
warnings came from the test codes, the correct fix here is to fix the test
code.
touch.c: In function ‘touch_init’:
touch.c:254:14: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default]
dev.name = "test device";
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit d0339a5c66.
seriously, what the fuck? Are we making xstrdup() return a const char now too?
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Introduced in fecc7eb1cf and reverts most of
that but it's helpfully mixed with other stuff.
InputAttributes are not const, they're strdup'd everywhere but the test code
and freed properly. Revert the const char changes and fix the test up instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Just forcing everything to const char* is not helpful, compiler warnings are
supposed to warn about broken code. Forcing everything to const when it
clearly isn't less than ideal.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
With systemd-logind the dbus-core will be used for more then just config, so
it should be possible to build it even when using a non dbus dependent config
backend.
This patch also removes the config_ prefix from the dbus-core symbols.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This API has been disabled by default since 1.4, the first release it came in.
There a no known users of it and even its direct replacement (HAL) has
been superseeded by udev on supported platforms since 1.8.
This code is untested, probably hasn't been compiled in years and should not
be shipped.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Just like the pointer type from Xdefs.h, the Pointer type from
XIproto.h collides with local declarations of variables using the same
name. XIproto.h can use _XITYPEDEF_POINTER to avoid declaring the
unnecessary pointer type.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
For now we're just building an uninstalled library. The extra EGL
stubs are required so that we can get the DIX building and usable
without pulling in the xf86 DDX code in glamor_egl.c.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
A client which is ready, but hasn't run for a while, should receive
the same benefit as one which has simply been idle for a while. Use
the smart_stop_tick to see how long it has been since a client has
run instead of smart_check_tick, which got reset each time a client
was ready, even if it didn't get to run.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
This signals to the fontsproto code that the X server has been fixed
to allow the name member in a FontPathElement struct to be declared
const to eliminate piles of warnings when assigning string constants
to them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Lots more const char stuff.
Remove duplicate defs of CoreKeyboardProc and CorePointerProc from
test/xi2/protocol-common.c
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
As usual, mostly const char changes. However, filter_device_events had
a potentially uninitialized value, 'raw', which I added a bunch of
checks for. I suspect most of those are 'can't happen', but it's hard
to see that inside the function.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We want to advertise the version we implement, not the version the
protocol headers happen to describe.
Reviewed-by: Jasper St. Pierre <<jstpierre@mecheye.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We want to advertise the version we implement, not the version the
protocol headers happen to describe.
Reviewed-by: Jasper St. Pierre <<jstpierre@mecheye.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Applications may end up allocating a bunch of shmfence objects, each
of which uses a file descriptor, which must be kept open lest some
other client ask for a copy of it later on.
Lacking an API that can turn a memory mapping back into a file
descriptor, about the best we can do is push the file descriptors out
of the way of other X clients so that we don't run out of the ability
to accept new connections.
This uses fcntl F_GETFD to push the FD up above MAXCLIENTS.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
By default, this looks through a list of directories to find one which
exists, but can be overridden with --with-shared-memory-dir=PATH
This patch doesn't actually do anything with this directory, just
makes it available in the configuration
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
VNC needs key_is_down to check if a key is processed as down before it
simulates various key releases. Make it available, because I seriously can't
be bothered thinking about how to rewrite VNC to not need that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Keith Packard <keithp@keithp.com>
shmint.h is part of sdk_HEADERS, and so can't use anything not
included in sdk_HEADERS.
busfault.h includes dix-config.h which is not. Leave the use of
struct busfault in shmint.h and move the include of busfault.h to
shm.c.
protocol-versions.h is not part of sdk_HEADERS, so instead of using
that, just use XTRANS_SEND_FDS to choose whether to expose the fd
passing requests directly.
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Knut Petersen <Knut_Petersen@t-online.de>
Reviewed-by: Julien Cristau <jcristau@debian.org>
v2: also avoid using protocol-versions.h
Requires passing through the __EXTENSIONS__ and _XOPEN_SOURCE defines
in order to expose the msg_control members in struct msghdr.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
req_fds and SetReqFds in include/dixstruct.h
ReadFdFromClient, WriteFdToClient and the FD flushing in os/io.c
Signed-off-by: Keith Packard <keithp@keithp.com>
If a client passes a section of memory via file descriptor and then
subsequently truncates that file, the underlying pages will be freed
and the addresses invalidated. Subsequent accesses to the page will
fail with a SIGBUS error.
Trap that SIGBUS, figure out which segment was causing the error and
then allocate new pages to fill in for that region. Mark the offending
shared segment as invalid and free the resource ID so that the client
will be able to tell when subsequently attempting to use the segment.
Signed-off-by: Keith Packard <keithp@keithp.com>
v2: Use MAP_FIXED to simplify the recovery logic (Mark Kettenis)
v3: Also catch errors in ShmCreateSegment
Conflicts:
include/dix-config.h.in
include/xorg-config.h.in
Check to see if xtrans FD passing is available and use that to
advertise the appropriate version of the SHM extension
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Until other operating systems have a libXtrans port for FD passing,
disable this on non-Linux systems.
Note that this define affects how libXtrans gets built into the X
server, which is why it need only define the symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This gets the server to link with xshmfence again, and also ensures
that the miSyncShm code is linked into the server with the reference
from sdksyms.
Signed-off-by: Keith Packard <keithp@keithp.com>
APM support in the Xserver was used to restore the console mode
prior to a power management event. This was to ensure the mode
upon suspend/resume was one that the system firmware or kernel
could deal with.
APM support is now largely obsolete, KMS drivers don't require a
mode restoration anyhow. Therefore it should be possible to disable
this feature.
(small modification by keithp - move test for XF86PM flag after check
for APM, then move XF86PM flag to xorg-config.h.in)
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Provides both a software implementation using timers and driver hooks
to base everything on vblank intervals.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds DRM compatible fences using futexes.
Uses FD passing to get pixmaps from DRM applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This passes a file descriptor from the client to the server, which is
then mmap'd
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds two interfaces:
void SetReqFds(ClientPtr client, int req_fds)
Marks the number of file descriptors expected for this
request. Call this before any request processing so that
any un-retrieved file descriptors will be closed
automatically.
int ReadFdFromClient(ClientPtr client)
Reads the next queued file descriptor from the connection. If
this request is not expecting any more file descriptors, or
if there are no more file descriptors available from the
connection, then this will return -1.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allocates a new region structure and copies a source region into
it in a single API rather than forcing the caller to do both steps themselves.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The time between the idle reset and the IdleTimeWakeupHandler to be called is
indeterminate. Clients with an PositiveTransition or NegativeTransition alarm
on a low threshold may miss an alarm.
Work around this by keeping a reset flag for each device. When the
WakeupHandler triggers and the reset flag is set, we force a re-calculation of
everything and pretend the current idle time is zero. Immediately after is the
next calculation with the real idle time.
Relatively reproducible test case: Set up a XSyncNegativeTransition alarm for
a threshold of 1 ms. May trigger, may not.
X.Org Bug 70476 <http://bugs.freedesktop.org/show_bug.cgi?id=70476>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
And now that we have the accessors, localize it. No functional changes, just
preparing for a future change.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
It's already not optional at configure time, this just makes it so at
build time too.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
In particular, Bool. This is not an ABI break:
/usr/include/X11/Xdefs.h:typedef int Bool;
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Otherwise things like EMASKSIZE * foo will yield interesting results.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Replace hardcoded SVR4 || linux || CSRG_BASED with an autoconf check and
the _POSIX_SAVED_IDS macro.
Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
grab->type is only non-zero for passive grabs. We're checking an active grab
here, so we need to check if the touch mask is set on the grab.
Test case: grab the device, then start two simultaneous touches. The
grabbing client won't see the second touchpoints because grab->type is 0
and the second touch is not an emulating pointer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes a build failure on debian's udeb builds.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Too many callers relied on the refcnt being handled correctly. Use a simple
wrapper to handle that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Obsolete since 4bc2761ad5. This struct
existed so copying a passive grab could be simply done by
activeGrab = *grab
and thus have a copy of the GrabPtr we'd get from various sources but still
be able to check device->grab for NULL.
Since 4bc2761 activeGrab is a pointer itself and points to the same memory
as grabinfo->grab, leaving us with the potential of dangling pointers if
either calls FreeGrab() and doesn't reset the other one.
There is no reader of activeGrab anyway, so simply removing it is
sufficient.
Note: field is merely renamed to keep the ABI. Should be removed in the
future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A sync grab is the owner once it gets events. If it doesn't replay the
event it will get all events from this touch, equivalent to accepting it.
If the touch has ended before XAllowEvents() is called, we also now need to
send the TouchEnd event and clean-up since we won't see anything more from
this touch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a device is frozen in results to a grab, we need to enqueue the events.
This makes things complicated, and hard to follow since touch events are now
replayed in the history, pushed into EnqueueEvent, then replayed later
during PlayReleasedEvents in response to an XAllowEvents.
While the device is frozen, no touch events are processed, so if there is a
touch client with ownership mask _below_ the grab this will delay the
delivery and potentially screw gesture recognition. However, this is the
behaviour we have already anyway if the top-most client is a sync pgrab or
there is a sync grab active on the device when the TouchBegin was generated.
(also note, such a client would only reliably work in case of ReplayPointer
anyway)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DeleteCallbackManager() introduced for better symmetry in the caller, they
do the same thing.
==20085== 24 bytes in 1 blocks are still reachable in loss record 11 of 103
==20085== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==20085== by 0x43A097: CreateCallbackList (dixutils.c:837)
==20085== by 0x43A1D3: AddCallback (dixutils.c:869)
==20085== by 0x4B1736: GEExtensionInit (geext.c:209)
==20085== by 0x41C8A8: InitExtensions (miinitext.c:389)
==20085== by 0x5AC918: main (main.c:208)
==2042== 8 bytes in 1 blocks are still reachable in loss record 2 of 97
==2042== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2042== by 0x4C2A657: realloc (vg_replace_malloc.c:525)
==2042== by 0x4802F5: XNFrealloc (utils.c:1095)
==2042== by 0x43A17A: CreateCallbackList (dixutils.c:855)
==2042== by 0x43A1EF: AddCallback (dixutils.c:870)
==2042== by 0x4B1752: GEExtensionInit (geext.c:209)
==2042== by 0x41C8A8: InitExtensions (miinitext.c:389)
==2042== by 0x5AC9E4: main (main.c:208)
==2042==
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Heaps of these:
==2042== 15,360 bytes in 120 blocks are still reachable in loss record 94 of
97
==2042== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2042== by 0x4C2A657: realloc (vg_replace_malloc.c:525)
==2042== by 0x45FB91: double_size (registry.c:65)
==2042== by 0x45FC97: RegisterRequestName (registry.c:85)
==2042== by 0x460095: RegisterExtensionNames (registry.c:179)
==2042== by 0x460729: dixResetRegistry (registry.c:334)
==2042== by 0x5AC992: main (main.c:201)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
==2547== 1 bytes in 1 blocks are still reachable in loss record 1 of 111
==2547== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==2547== by 0x64D1551: strdup (strdup.c:43)
==2547== by 0x4802FB: Xstrdup (utils.c:1113)
==2547== by 0x585B6C: XkbSetRulesUsed (xkbInit.c:219)
==2547== by 0x58700F: InitKeyboardDeviceStruct (xkbInit.c:595)
==2547== by 0x419FA3: vfbKeybdProc (InitInput.c:74)
==2547== by 0x425A3D: ActivateDevice (devices.c:540)
==2547== by 0x425F65: InitAndStartDevices (devices.c:713)
==2547== by 0x5ACA57: main (main.c:259)
and a few more of the above.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
We don't want to hotplug output devices while we are VT switched,
as we get races between multiple X servers on the device open, and
drm device master status. This just queues device opens until we return
from VT switch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise this file is emitted in every unit that includes it.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
e02f864fdf "Suppress cursor display until the first XDefineCursor() request"
disabled cursor display a priori unless -retro is given.
On a plain server, caling XFixesHideCursor() and XFixesShowCursor() would
show the default root cursor, despite no client actually defining a cursor.
Change the logic, disable CursorVisible by default and only enable it from
the window's CWCursor logic. If no window ever defines a cursor, said cursor
stays invisible.
X.Org Bug 58398 <http://bugs.freedesktop.org/show_bug.cgi?id=58398>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The transformation matrix we previously stored was a scaled matrix based on
the axis ranges of the device. For relative movements, the scaling is not
required (or desired).
Store two separate matrices, one as requested by the client, one as the
product of [scale . matrix . inv_scale]. Depending on the type of movement,
apply the respective matrix.
For relative movements, also drop the translation component since it doesn't
really make sense to use that bit.
Input ABI 19
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
For absolute events, if the client specifies a screen number offset the
coordinates by that. And add a new flag so we know when _not_ to add the
screen offset in GPE.
Without this offset and the flag, GPE would simply add the offset of the
current screen if POINTER_SCREEN is set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This was accidentally excluded when we added barriers.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
inputstr, double defines TouchListener typedef, maybe some gcc handles it,
but not all.
fixes tinderbox
Reported-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is the lazy man's %f support. Print the decimal part of the number,
then append a decimal point, then print the first two digits of the
fractional part. So %f in sigsafe printing is really %.2f.
No boundary checks in place here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
RELOCATE_PROJECTROOT is AC_DEFINED in configure.ac, but currently has no effect
as it doesn't appear in any AC_CONFIG_HEADER header.
When packaged for Windows, we do not have a unix-style filesystem tree, where
file needed by the X server can be found in fixed, absolute paths under the
prefix (PROJECTROOT).
Instead, the filesystem tree containing files needed by the X server and clients
will be installed with the directory containing the X server executable as the
root directory of that tree.
(Typically, this will be in the Program Files directory, which does not have a
fixed name, as it can be moved, localized, or added to to indicate x86 or x64
binaries)
So, RELOCATE_PROJECTROOT is used to make a native Windows build of the X server
look for various files (fonts, xkb data) in locations relative to the X server
rather than at absolute paths, by translating those paths at run-time.
Additionally the XKEYSYMDB, XERRORDB, XLOCALEDIR env vars checked by libX11 are
set appropriately for clients started by the X server.
Signed-off-by: Ryan Pavlik <rpavlik@iastate.edu>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Instead of guessing what resource type the listener is and what property to
retrieve, store the resource type in the listener directly.
Breaks XIT test cases:
TouchGrabTestMultipleTaps.PassiveGrabPointerEmulationMultipleTouchesFastSuccession
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=56557
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chase Douglas <chase.douglas@ubuntu.com>
This places a pointer to the grab related to a TouchListener directly
in the TouchListener structure rather than hoping to find the grab
later on using the resource ID.
Passive grabs have resource ID in the resource DB so they can be
removed when a client exits, and those resource IDs get copied when
activated, but implicit grabs are constructed on-the-fly and have no
resource DB entry.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No reason to have a struct declared inside another struct
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 31bf81772e changed the clientState field
from a signed int to a signed int 2-bit bitfield. The ClientState enum that is
expected to be assigned to this field has four values: ClientStateInitial (0),
ClientStateRunning (1), ClientStateRetained (2), and ClientStateGone (3).
However, because this bitfield is signed, ClientStateRetained becomes -2 when
assigned, and ClientStateGone becomes -1. This causes warnings:
test.c:54:10: error: case label value exceeds maximum value for type [-Werror]
test.c:55:10: error: case label value exceeds maximum value for type [-Werror]
The code here is a switch statement:
53 switch (client->clientState) {
54 case ClientStateGone:
55 case ClientStateRetained:
56 [...]
57 break;
58
59 default:
60 [...]
61 break;
62 }
It also causes bizarre problems like this:
client->clientState = ClientStateGone;
assert(client->clientState == ClientStateGone); // this assert fails
Also change the signedness of nearby bitfields to match.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Colin Harrison <colin.harrison at virgin.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Conflicts:
Xi/xichangehierarchy.c
Small conflict with the patch from
Xi: don't use devices after removing them
Was easily resolved by hand.
Signed-off-by: Keith Packard <keithp@keithp.com>
The AC_C_TYPEOF adds a #undef typeof to its autogenerated config.h.in
template, but b8ab93dfbc didn't copy that to dix-config.h.in
when HAVE_TYPEOF was, so the macro could claim typeof support but not
make it work, when used with compilers like Solaris Studio 12.1 which
only recognize it as __typeof__.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of having the pointer barrier code enqueue events separately from
GetPointerEvents, pass the event list through and let it add to it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
This adds support for clients that would like to get a notification
every time a barrier is hit, and allows clients to temporarily release
a barrier so that pointers can go through them, without having to
destroy and recreate barriers.
Based on work by Chris Halse Rogers <chris.halse.rogers@canonical.com>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than riding on the ConstrainCursorHarder hook, which has
several issues, move to an explicit hook, which will help us with
some RANDR interaction issues.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
For touch selection conflicts, we need to check not only if the mask is set
for the device, but if it is set for only that specific device (regardless
of XIAll*Devices)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
eventType is set for the type that triggered a XkbControlsNotify event.
Technically, SlowKeys is triggered by a timer which doesn't have a matching
core event type. So we used to use 0 here.
Practically, the timer is triggered by a key press + hold and cancelled when
the key is released before the timeout expires. So we might as well set
KeyPress (keycode) in the ControlsNotify to give clients a chance to differ
between timer-triggered SlowKeys and client-triggered ones.
This is a chance in behaviour, though I suspect with little impact.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Unfortunately this also got lost in the extmod fallout, leaving the DMX
server not exposing the DMX or GLX extensions.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
DDXTouchPointInfoRec.valuators used to store axis values after transform.
This resulted in Coordinate Transformation Matrix
being applied multiple times to the last coordinates,
in the case when only pressure changes in the last touch event.
Changed DDXTouchPointInfoRec.valuators to store values before transform.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=49347
Signed-off-by: Yuly Novikov <ynovikov@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
As before GetTouchEvents causes unwanted side effects. Add a new
function GetDixTouchEnd, which generates a touch event from the touch
point. We fill in the event's screen coordinates from the MD's current
sprite position.
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetTouchEvents has plenty of side effects such as moving the pointer or
updating the master device, which we don't want to happen when
replaying. The only reason for calling it was to generate a DCCE event,
but GetTouchEvents doesn't even do that right (we might need a DCCE
event even when replaying a master event, or clients could interpret
valuator data incorrectly).
This discussion is moot at the moment anyway, since DeliverTouchEvents
doesn't appear to deliver DCCE events.
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
[Added call to processInputProc instead of direct call to DeliverTouchEvents]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No-one uses this - not xkbcomp, not GNOME, not KDE. The preferred way
to deal with component listing (which gives you RMLVO rather than
KcCGST) is to use the XML files on the client side.
Indeed, a couple of hours after making this commit, it emerged that all
*.dir files built with xkbcomp 1.1.1 (released two years ago) and later
have been catastrophically broken and nearly empty. So I think that's
reasonable proof that no-one uses them.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The double_to_f1616() functions do the same thing, and they're tested.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
libnettle is smaller than libgcrypt, currently being released more
frequently, and has replaced the latter in gnutls-3.x (which is used
by TigerVNC, so they can avoid pulling in two crypto libraries
simultaneously).
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
dispatch.c: In function 'ProcCopyArea':
dispatch.c:1608:5: warning: declaration of 'rc' shadows a previous local
dispatch.c:1604:9: warning: shadowed declaration is here
dispatch.c: In function 'ProcCopyPlane':
dispatch.c:1647:5: warning: declaration of 'rc' shadows a previous local
dispatch.c:1643:9: warning: shadowed declaration is here
events.c: In function 'GetClientsForDelivery':
events.c:2030:68: warning: declaration of 'clients' shadows a global declaration
../include/dix.h:124:28: warning: shadowed declaration is here
events.c: In function 'DeliverEventToWindowMask':
events.c:2113:19: warning: declaration of 'clients' shadows a global declaration
../include/dix.h:124:28: warning: shadowed declaration is here
events.c: In function 'EventSuppressForWindow':
events.c:4420:12: warning: declaration of 'free' shadows a global declaration
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
These functions are already declared in <X11/fonts/fontproto.h>.
Redeclaring them just for _X_EXPORT causes tons of warnings throughout
xserver, but they need to be declared somewhere to be picked up by
sdksyms.sh. Doing so in a private header limits the warnings to
sdksyms.c; fixing those as well would require changes to fontsproto.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
ABS_MT_DISTANCE exists since kernel v2.6.38,
ABS_MT_TOOL_X|Y appeared in v3.6.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Otherwise:
* We can't end the touches while device is disabled
* New touches after enabling the device may erroneously be mapped to old
logical touches
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InitOutput.c: In function ‘OsVendorInit’:
InitOutput.c:630:29: warning: assignment left-hand side might be a candidate for a format attribute [-Wmissing-format-attribute]
winprocarg.c: In function ‘ddxProcessArgument’:
winprocarg.c:231:29: warning: assignment left-hand side might be a candidate for a format attribute [-Wmissing-format-attribute]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This hack was added to suppress events generated by Composite's internal
unmap/map cycle on redirection state change. Since that cycle was
removed in 193ecc8b4, these can go.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pick smaller types where possible, including bitfielding some Bools and
small enums, then shuffle the result to be hole-free. 192 -> 128 bytes
on LP64, 144 -> 96 bytes on ILP32.
Signed-off-by: Adam Jackson <ajax@redhat.com>
this is a simple clean-up that is useful to stop further propogation
of this construct.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some compilers have difficulty with the previous implementation which
relies on undefined behavior according to the C standard. Using
offsetof() from <stddef.h> (which most likely just uses
__builtin_offsetof on modern compilers) allows us to accomplish this
without ambiguity.
This fix also requires support for typeof(). If your compiler does not
support typeof(), then the old implementation will be used. If you see
failures in test/list, please try a more modern compiler.
v2: Added fallback if typeof() is not present.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We've had reports of two copies of the GLX bits, one in the server
and one in libglx.so causing problems, I didn't understand why the
X server needed a copy so drop it, however then we have to fix a missing
GlxExtensionInit that comes from sdksyms, so work around it by moving
that one declaration into a header that sdksyms doesn't scan.
Thanks to Jon Turney for debugging the actual problem.
(copyright header from extinit.h that seems most appropriate put on top).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52402
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
"new" is a reserved word in C++.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Popen and Pclose are never used on Windows, so don't bother to even
try to define them.
System(s) was defined as system(s), but the two users of that
function are in xkb, which carefully redefines that as
Win32System. Move Win32System and Win32TempDir to os/utils.c, renaming
Win32System to be just System, which simplifies the xkb code
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
These flags were unexported by commit a1d41e311c,
which moved the declarations around and lost the _X_EXPORT attributes in the
process. Since drivers need these and it's late in the release cycle, just
re-export them for now.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Not to be confused with XFree86Loader or XorgLoader. Which are both now
dead too.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
setupFunc was used as an early callback for half-modular extensions such
as Xv, XvMC and DGA to set up hooks between the core server and the
modular component. Now we've rid ourselves of that, we can also bin
setupFunc.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
There was nothing XFree86-specific or loader-specific about this, aside
from using xf86MsgVerb instead of ErrorF.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In preparation for gutting loadext.c, move the ExtensionModule struct to
the DIX, and unexport ExtensionModuleList (why, why, why, why was this
ever exported in the first place, tbqh).
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of letting it languish in extmod just because we want to
configure bits of it from xf86, move XSELinux to the builtin part of
Xext, and do its configuration from xf86ExtensionInit.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xv used to call XvScreenInit and co. through function pointers, as
XvScreenInit may have been sitting on the other side of a module
boundary from xf86XvScreenInit. Why this was so is a mystery, but make
it not so any more.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build these extensions into the core server, rather than letting
them languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build XRes support into the core server, rather than letting it
languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Always build DPMS support into the core server, rather than letting it
languish in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we've built MIT-SCREEN-SAVER support, then just build it into the
main binary, rather than leaving it in extmod.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than languishing in its own special module, move RECORD into the
core server.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If DBE support is compiled in the server, just man up and build it into
the server, rather than having it as an external module.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Create extinit.h (and xf86Extensions.h, for Xorg-specific extensions) to
hold all our extension initialisation prototypes, rather than
duplicating them everywhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
externsion.h required bits from Xfuncproto.h and dixstruct.h, but
included neither; fix that.
It also had _XFUNCPROTOBEGIN and _XFUNCPROTOEND wrappers, which is a bit
pointless for a server-only library, as it's only needed for C++.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Does what it says on the box, replacing those from Xi/ and glx/.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds new function padding_for_int32() and uses existing pad_to_int32()
depending on required results.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Each DDX currently calls OsReleaseSIGIO in case it was suspended when
the server regen started. This causes a BUG to occur if SIGIO was
*not* blocked at that time. Instead of relying on each DDX, make the
OS layer reliably reset all signal state at server init time, ensuring
that signals are suitably unblocked and that the various signal state
counting variables are set back to zero.
Signed-off-by: Keith Packard <keithp@keithp.com>
For DRI2 in some offload cases we need to set a new pixmap on the crtc,
this hook allows dri2 to call into randr to do the necessary work to set
a pixmap as the scanout pixmap for the crtc the drawable is currently on.
This is really only to be used for unredirected full screen apps in composited
environments.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
add the linked list and provider hooks.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds two functions for drivers to use directly to keep a
linked list of slave pixmaps to do damage tracking on and keep
updated. It also adds a helper function that drivers may optionally
call to do a simple copy area damage update.
v2: use damage.h not damagestr.h, fixes ephyr build.
v3: address ajax review: use slave_dst, drop unused dst member.
v4: check DamageCreate return, add SourceValidate comment,
add a comment addressing possible optimisation possibility
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When randr notices a crtc configuration request for a slave device,
it checks if the slave allocated pixmap exists and is suitable,
if not it allocates a new shared pixmap from the master, shares
it to the slave, and starts the master tracking damage to it,
to keep it updated from the current front pixmap.
If the resize means the crtc is no longer used it will destroy
the slave pixmap.
This adds the concept of a scanout_pixmap to the randr_crtc object,
and also adds a master pixmap pointer to the pixmap object, along
with defining some pixmap helper functions for getting pixmap box/regions.
v2: split out pixmap sharing to a separate function.
v3: update for void *
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a hooks for pixmap sharing and tracking.
The pixmap sharing ones get an integer handle for the pixmap
and use a handle to be the backing for a pixmap.
The tracker interface is to be used when a GPU needs to
track pixmaps to be updated for another GPU.
v2: pass slave to sharing so it can use it to work out driver.
v3: use void * as per keithp's suggestion.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just add the interfaces to attach/detach output slaves, and
a linked list to keep track of them. Hook up the randr providers
list to include these slaves.
v1.1: add another assert to the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This list is meant for attaching unbound gpu screens to initially,
before the client side rebinds them.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds callbacks into the ddx for udev gpu hotplug.
v2: fix some strncmp returns.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch introduces gpu screens into screenInfo. It adds interfaces
for adding and removing gpu screens, along with adding private fixup,
block handler support, and scratch pixmap init.
GPU screens have a myNum that is offset by GPU_SCREEN_OFFSET (256),
this is used for logging etc.
RemoveGPUScreen isn't used until "xfree86: add platform bus hotplug support".
v2: no glyph pictures for GPU screens for now.
v3: introduce MAXGPUSCREENS, fix return value check
v4: fixup myNum when renumbering screens (ajax)
v5: drop cursor privates for now.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
On Linux in order for future hotplug work, we are required to interface
to udev to detect device creation/removal. In order to try and get
some earlier testing on this, this patch adds the ability to use
udev for device enumeration on Linux.
At startup the list of drm/kms devices is probed and this info is
used to load drivers.
A new driver probing method is introduced that passes the udev
device info to the driver for probing.
The probing integrates with the pci probing code and will fallback
to the pci probe and old school probe functions in turn.
The flags parameter to the probe function will be used later
to provide hotplug and gpu screen flags for the driver to behave
in a different way.
This patch changes the driver ABI, all drivers should at least
be set with a NULL udev probe function after this commit.
v2: rename to platform bus, now with 100% less udev specific,
this version passes config_odev_attribs around which are an array
of id/string pairs, then the udev code can attach the set of attribs
it understands, the OS specific code can attach its attrib, and then
the core/drivers can lookup the required attribs.
also add MATCH_PCI_DEVICES macro.
This version is mainly to address concerns raised by ajax.
v3: Address comments from Peter.
fix whitespace that snuck in.
rework to use a linked list with some core functions that
xf86 wraps.
v4: add free list, fix struct whitespace.
ajax this address most of your issues?
v5: drop probe ifdef, fix logic issue
v6: some overhaul after more testing.
Implement primaryBus for platform devices.
document hotplug.h dev attribs - drop sysname attrib
fix build with udev kms disabled
make probing work like the PCI probe code,
match against bus id if one exists, or primary device.
RFC: add new bus id support "PLAT:syspath". we probably
want to match on this a bit different, or use a different
property maybe. I was mainly wanting this for use with
specifying usb devices in xorg.conf directly, but PLAT:path
could also work I suppose.
v6.1: add missing noop platform function
v7: fix two interactions with pci probing and slot claiming, prevents
pci and platform trying to load two drivers for same slot.
v8: test with zaphod mode on -ati driver, fixup resulting issue
clean up common probe code into another function, change busid
matching to allow dropping end of strings.
v9: fix platform probing logic so it actually works.
v9.1: fix pdev init to NULL properly.
v10: address most of Keith's concerns.
v4 was thanks to Reviewed-by: Adam Jackson <ajax@redhat.com>
v5 was Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This will permit midispcur to allocate its privates for hotplug outputs
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Screen-specific privates areas are only allocated for objects related
to the target screen; objects allocated for other screens will not
have the private space reserved. This saves memory in these objects
while also allowing hot-plug screens to have additional private
allocation space beyond what the core screens are using.
Drivers are encouraged to switch to this mechanism as it will reduce
memory usage in multi-GPU environments, but it is only required for
drivers which will be loaded after the server starts, like
modesetting.
Objects providing screen-specific privates *must* be managed by the
screen-specific private API when allocating or initializing privates
so that the per-screen area can be initialized properly.
The objects which support screen-specific privates are:
Windows
Pixmaps
GCs
Pictures
Extending this list to include Colormaps would be possible, but
require slightly more work as the default colormap is created before
all colormap privates are allocated during server startup, and hence
gets a bunch of special treatment.
Of particular note, glyphs are *not* capable of supporting
screen-specific privates as they are global objects, not allocated on
a screen-specific basis, and so each driver must be able to see their
privates within the glyph.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Let the dix be in charge of changing the sigprocmask so we only have one
entity that changes it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This merge includes a minor fixup for '%p' arguments; must cast to
uintptr_t instead of uint64_t as we use -Werror=pointer-to-int-cast
which complains when doing a cast (even explicitly) from a pointer
to an integer of different size.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ErrorF() is not signal safe. Use ErrorSigSafe() whenever an error
message may be logged in signal context.
[whot: edited to "ErrorFSigSafe"]
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
[whot: edited to use varargs, squashed commit below]
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
os: fix vararg length calculation
Make %u and %x sizeof(unsigned int), %p sizeof(void*). This is printf
behaviour and we can't guarantee that void* is uint64_t anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No other Xfont consumer used it, and this saves us from having to link
callers against libXfont for one simple function when doing
-no-undefined symbols builds.
The function is given a new name to avoid clashing with existing libXfont
binaries, but a #define is provided to preserve the API so we don't have
to fix all the callers at the same time.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This code existed in 3 different forms, perhaps it should be
consolidated.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Why sending the number of the (implementation-dependent) error statement to
the client is a good idea is a bit beyond me, but at least document it so we
can all share the despair.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This will be used for checking for proper logging when in signal
context.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
f3410b97cf introduced a regression on server
shutdown. If any button or key was held on shutdown (ctrl, alt, backspace
are usually still down) sending a raw event will segfault the server. The
the root windows are set to NULL before calling CloseDownDevices().
Avoid this by disabling all devices first when shutting down. Disabled
devices won't send events anymore.
Master keyboards must be disabled first, otherwise disabling the pointer
will trigger DisableDevice(keyboard) and the keyboard is removed from the
inputInfo.devices list and moved to inputInfo.off_devices. A regular loop
through inputInfo.devices would thus jump to off_devices and not recover.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Helper functions to avoid things like
if (foo) {
BUG_WARN(foo);
return 1;
}
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This is a squash merge containing all the API changes, as
well as the video ABI bump.
Its been squashed to make bisection easier.
Full patch log below:
commit b202738bbf0c5a1c1172767119c2c71f1e7f8070
Author: Aaron Plattner <aplattner@nvidia.com>
Date: Mon May 14 15:16:11 2012 -0700
xfree86: Bump video ABI to 13.0
The ABI was broken by changes to convert from screen index numbers to ScreenPtr
/ ScrnInfoPtr in various structures and function signatures.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d5f7d9f8d408bcad3f83277d255f25d3b0edbf3
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 10:56:57 2012 +0100
xf86: xf86ClearEntityListForScreen should take a pScrn
When adding GPU screens this make life easier.
(also fix comment, as pointed out by Alan)
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit afee8b5ab4501597ecc1ade34124d7ca227ab055
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 07:07:32 2012 +0100
xf86i2c: add pscrn for drivers to use
This just adds a pScrn pointer into the struct for the drivers to use
instead of scrnIndex. Mostly scrnIndex is used for logging, but some
drivers use it to lookup xf86Screens, so let them stash a pScrn instead.
Removing the scrnIndex is a bit more involved and I'm not sure its worth
the effort. Doing i2c in the X server is legacy code as far as I'm concerned.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit ea5092f1f679691d187f1eee9427e6057beec56e
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 19:25:20 2012 +0100
dix/gc: consolidate GC object creation in one place
The standard GC create and scratch GC create were 90% the same really,
and I have a need in the future for creating GC objects without the
other bits, so wanted to avoid a third copy.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d91482ea9b4883e64e496f2768168e0ffa21ba1
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 10:24:06 2012 +0100
xf86: add a define to denote the new non-index interfaces are being used
This can be used by drivers to provide compatible APIs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 37c3ae3e6cd4f3dedc72f371096d6743f8f99df3
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 15:09:12 2012 +0100
dix: make Create/Free scratch pixmaps take a ScreenPtr
While technically an API/ABI change I doubt anyone uses it,
but it helps in splitting screens up.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 75f2062a3fe94f04764ecc7d2ff2fbbeccb9da60
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:57:55 2012 +0100
xf86/xv: remove scrnIndexfrom xf86FindXvOptions.
Move this interface to taking an ScrnInfoPtr.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit f80c2374f40ea7b2ee0556e2e76cc07406f3d843
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:53:59 2012 +0100
xf86: make xf86DeleteScreen take a ScrnInfoPtr (v2)
stop passing indices into this function.
v2: drop flags argument.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 58824e414f35682435f15bfe6c4b656bd90b9235
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:48:09 2012 +0100
xf86: fix xf86IsScreenPrimary interface to take a pScrn (API/ABI)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6b4fc1f9d391bcdf7ca288766e49bce60f4635cd
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:18:59 2012 +0100
xserver: convert block/wakeup handlers to passing ScreenPtr (ABI/API) (v2)
Instead of passing an index, pass the actual ScreenPtr. This allows
more moving towards not abusing xf86Screens + screenInfo.
v2: drop the blockData/wakeupData args as per ajax's suggestion.,
fix docs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 790d003de20fb47674420a24dadd92412d78620d
Author: Dave Airlie <airlied@gmail.com>
Date: Wed Apr 11 09:53:14 2012 +0100
xf86/common: remove some more pScrn->pScreen uses
remove some more conversions that appeared after api cleanups.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aac85e18d1dd093f2cad6bd29375e40bd7af0b8f
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:34:53 2012 +0100
ddc: change API to take ScrnInfoPtr (v2)
This removes all xf86Screens usage from ddc code,
it modifies the API for some functions to avoid taking indices.
v2: address Alan's comments about dropping DDC2Init parameter.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit fe3f57b6eaf6860a33876a54f9439f69578f03a5
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:31:26 2012 +0100
vbe: don't use index for VBEInterpretPanelID (API)
Remove use of xf86screens from vbe module.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit abf1965f4ed91529036d3fdb470d6a3ce6f29675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:25:11 2012 +0100
int10/vbe: don't use xf86Screens. (ABI) (v3)
Pass the ScrnInfoPtr instead of the index in the int10 struct.
This saves us using it to dereference xf86Screens.
v2: address Alan's comment to fix struct alignment.
v3: squash in all the int10 fixes, test the vm86 code builds,
after comments by Keith.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 23cca612b4fb5efc33683c7624b803b457387e3d
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:30:18 2012 +0100
xserver: drop index argument to ScreenInit (ABI/API) (v2)
This drops the index argument, its the same as pScreen->myNum,
and its the last major index abuse I can find.
v2: address Alan's review - update docs, fix xwin/xnest/darwin
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 40d360e2d7e832407f3ed64e3a02c27ecc89a960
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:23:01 2012 +0100
xf86: migrate PointerMoved from index to ScrnInfoPtr (ABI/API)
This migrates PointerMoved from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aa60a2f38679d0eeb979a9c2648c9bc771409bf9
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:20:46 2012 +0100
xf86: migrate PMEvent to a ScrnInfoPtr (ABI/API)
This migrates the PMEvent from index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d3f28ef44371ed4a039ffc5dd7eb6408d1269ba2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:18:30 2012 +0100
xf86: migrate SetDGAMode from index to ScrnInfoPtr (ABI/API)
This migrates the SetDGAMode callback from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit baf5e4818a74f2b68c3dfdcc56f54322351039a0
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:14:11 2012 +0100
xf86: migrate ChangeGamma from index to ScrnInfoPtr (ABI/API) (v2)
This migrates the ChangeGamma interface to avoid passing a index.
v2: fix xf86RandR12.c + xf86cmap.c call
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 51e5f90ada929d6b23176090badbb42fdb3fa550
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:11:09 2012 +0100
xf86/exa: migrate index to screen types for EnableDisableFBAccess (ABI/API)
The EXA interface migrates to ScreenPtr,
and the xf86 interface migrated to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 94f1f21d17e86f96d4a54292a399160950087675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:02:11 2012 +0100
xf86: migrate ValidMode callback to ScrnInfoPtr (ABI/API)
This migrates the ValidMode to passing a ScrnInfoPtr instead
of an index.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3f8f18198fed4f39ec805b508a3482e91eea26b2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:59:46 2012 +0100
xf86: migrate SwitchMode to taking ScrnInfoPtr (ABI/API) (v2)
This migrate the SwitchMode interface to take a ScrnInfoPtr
instead of an index.
v2: drop flags.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d06a038a5c49328ab3a8d969d24f9fcd22c63202
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:50:37 2012 +0100
xf86: move AdjustFrame to passing ScrnInfoPtr (ABI/API) (v2)
This converts AdjustFrame code paths to passing a ScrnInfoPtr
instead of an integer index.
v2: drop flags args.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 53d2f8608ffd4090d08e7d5cf2e92fb954959b90
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:41:27 2012 +0100
xf86: modify FreeScreen callback to take pScrn instead of index. (ABI/API) (v2)
Another index->pScrn conversion.
v2: drop flags arg.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 60db37c0b247052e0f5c54b1921fe58a3609c2e3
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:35:41 2012 +0100
xf86: change EnterVT/LeaveVT to take a ScrnInfoPtr (ABI/API break) (v2)
This modifies the EnterVT/LeaveVT interfaces to take a ScrnInfoPtr
instead of an index into xf86Screens. This allows dropping more
public dereferences of the xf86Screens and screenInfo.
v2: drop flags args as suggested by Keith, fix docs.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 06729dbbc804a20242e6499f446acb5d94023c3c
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:04:59 2012 +0100
xserver: remove index from CloseScreen (API/ABI breakage)
This drops the index from the CloseScreen callback,
its always been useless really, since the pScreen contains it.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to use udev for gpu enumeration, we need to init udev earlier
than input initialisations. This splits the config init stuff so that udev
pre init sets up before output initialisation.
this is just a prepatory patch, doesn't change anything major.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is only called from the enterleave implementation, so move it and its
helper functions to there. No functional changes.
Fixes build error introduced in 31174565ec if
building with '-Werror=implicit-function-declaration'
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
../../include/xkbsrv.h:308:51: warning: redundant redeclaration of
‘DeviceKeyPress’ [-Wredundant-decls]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Both Cygwin and MinGW can use Windows' native CryptoAPI for SHA1,
saving a dependency on libgcrypt or OpenSSL. The necessary functions
are in ADVAPI32.DLL, which is among the default lib flags and is
already used in hw/xwin for accessing the registry.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Normal snprintf() usually returns the number of bytes that would have been
written into a buffer had the buffer been long enough.
The scnprintf() variants return the actual number of bytes written,
excluding the trailing '\0'.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This option specifies a file descriptor in the launching process. X
will scan for an available display number and write that number back to
the launching process, at the same time as SIGUSR1 generation. This
means display managers don't need to guess at available display numbers.
As a consequence, if X fails to start when using -displayfd, it's not
because the display was in use, so there's no point in retrying the X
launch on a higher display number.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The function will be used for building a sprite for pointer emulation
after an explicit device grab. This commit refactors the code so that
TouchBuildSprite will function with any event type and moves the checks
to the caller.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This will be used for accepting and rejecting touches in the future.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The ResourceSizeRec now contains the number of references to the
resource. For example a Pixmap knows this value and it can be useful
for determining the "weight" of the resource. Typically this value
is 1.
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Calls to Hash(client, id) were replaced with calls directly to
HashResourceID(id, clientTable[client].hashsize) and the Hash-function
was removed.
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
The public hashing function HashResourceID uses the same hashing
hashing algorithm as resource.c uses internally, but it provides an
interface that will is usable by external modules. It provides a
parameter for the number of bits for the hash, instead of finding the
size from its internal hash table.
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
The mechanism allows iterating even through subresources that don't
have specific XID's. When such 'resources' are iterated, the XID for
them will be zero. A resource type can assign an iteration function
for its subresources with SetResourceTypeFindSubResFunc; by default
resources are assumed not to contain subresources.
The purpose of this extension is to enable accurate accounting of
the resources a resource consumes or uses.
This patch provides the subresource iteration functions for Windows
and GCs.
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
This patch implements a part of the XResource extension v1.2 (as specified in
http://patchwork.freedesktop.org/patch/2720/ ). The request implemented is
X_XResQueryClientIds.
This patch depends on the feature introduced by
1e933665be "dix: Add facilities for
client ID tracking." .
This latest version also adds Doxygen-formatted comments and takes a better
notice of coding conventions (as in http://www.x.org/wiki/CodingStyle ).
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Previously, we only had one idle alarm that was triggered for all devices,
whenever the user used any device, came back from suspend, etc.
Add system SyncCounters for each device (named "DEVICEIDLETIME x", with x
being the device id) that trigger on that device only. This allows for
enabling/disabling devices based on interaction with other devices.
Popular use-case: disable the touchpad when the keyboard just above the
touchpad stops being idle.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: James Jones <jajones@nvidia.com>
Preparation work for per-device idle counters.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: James Jones <jajones@nvidia.com>
If there is only one listener of a touch, the listener is a grab, and is
accepted before the touch has ended, the current code will not end the
touch record when the touch does end.
This change adds a listener state for when a touch is accepted but has
not yet ended. We now keep the touch record alive in this state, but end
it when the touch ends.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This doesn't really implement early accept as it should. Ideally, the
server should send end events to all subsequent touch clients as soon as
an early accept comes in. However, this implementation is still protocol
compliant. We can always improve it later.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This function is mostly correct for early reject usage. With a small
change to pass the client resource explicitly and making the
TouchOwnership event optional, it is usable for all rejection scenarios.
This change exports it for use outside Xi/exevents.c and modifies the
name accordingly.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Rename functions/macros from list_* to xorg_list_*
Rename struct from struct list to struct xorg_list.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In-sed-I-trust: Peter Hutterer <peter.hutterer@who-t.net>
ErrorF output is prefixed with a timestamp, so the previous output would
look like this:
[ 50.423] BUG: triggered 'if (dev->valuator->numAxes < 2)'
BUG: getevents.c:842 in scale_to_desktop()
Change this to have the prefix on both lines:
[ 50.423] BUG: triggered 'if (dev->valuator->numAxes < 2)'
[ 50.423] BUG: getevents.c:842 in scale_to_desktop()
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
sizeof(ClientRec) ILP32 LP64
before 120 184
after 104 136
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
According to Daniel Kurtz, a typedef void *pointer is a atomic type. So a
'const pointer' is equivalent to 'void* const' instead of the intended
'const void*'.
This technically changes the ABI, but we don't bump it for this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Leftover code from an earlier version of GetTouchEvents.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
For touch events with pointer emulation, the event that triggers the grab
(the pointer event) is not the same as the actual event (the touch event).
For replaying, we need to store the real event then.
No effective changes at this point, for the current caller event and
real_event are identical.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Does not include pointer emulation handling.
Does include partial ownership handling but not the actual processing of
ownership events.
Note: this commit is a retroactive commit extracted from a series of ~50
commits and may thus appear a bit more complicated than what you'd write out
from scratch.
Pointer processing tree is roughly:
- ProcessOtherEvents
- ProcessTouchEvents
- DeliverTouchEvents
- DeliverTouchBeginEvent|DeliverTouchEndEvent|...
- DeliverOneTouchEvent
Also hooks up the event history playing to the right function now.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Co-authored-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The first listener in the sequence is the owner of the touch sequence.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The DIX will call TouchSetupListeners once for a new touch. After that
the listener list remains static, with listeners only dropping out when they
either reject the grab or disappear.
Exception: if grabs activate they are prefixed to the listeners.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Returns the respective pointer event type for a given touch event type.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Touch events' sprite trace stays the same for the duration of the touch
sequence.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
If touch client has not registered for ownership events and a grab above
that client is rejected, the client needs to receive the complete event
history.
The history currently doesn't really do fancy overflow handling. We assume
that the first TOUCH_HISTORY_SIZE events are the important ones and anything
after that is dropped. If that is a problem, fix the client that takes > 100
event to decide whether to accept or reject.
Events marked with TOUCH_CLIENT_ID or TOUCH_REPLAYING must not be stored in
the history, they are events created by the DIX to comply with the protocol.
Any such event should already be in the history anyway.
A fixme in this patch: we don't have a function to actually deliver the
event yet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No callers yet. This API is not to be used by drivers, it's an API for the
DIX which will create ownership events mainly on touch acceptance/rejection.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The DIX touchpoints are the ones used for event processing.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
DDX touch points are the ones that keep records of the driver-submitted
touchpoints. They're unaffected by the grab state and terminate on a
TouchEnd submitted by the driver.
The client ID assigned is server-global.
Since drivers usually submit in the SIGIO handler, we cannot allocate in the
these functions.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
These structs will be used to store touch-related data, events and
information.
Drivers must call InitTouchClassDeviceStruct to set up a multi-touch capable
device.
Touchpoints for the DDX and the DIX are handled separately - touchpoints
submitted by the driver/DDX will be stored in the DDXTouchPointInfoRec. Once
the touchpoints are processed by the DIX, new TouchPointInfoRecs are created
and stored. This process is already used for pointer events with the
last.valuators field.
Note that this patch does not actually add the generation of touch events,
only the required structs.
TouchListeners are (future) recipients of touch or emulated pointer events.
Each listener is in a state, depending which event they have already
received. The type of listener defines how the listener got to be one.
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
xf86PostTouchEvent is the driver API to submit touch events to the server.
This API doesn't do anything yet though but now we can at least bump the
API.
For valuators, drivers should use the existing xf86InitValuatorAxisStruct
function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This patch applies most of the protocol conversions and the internal event
type for ownership events.
Note that ownership events are generated by the DIX only, they do not pass
through the event queue.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This allows us to run the server as a normal user whilst still
being able to use the -modulepath, -logfile and -config switches
We define a xf86PrivsElevated which will do the checks and cache
the result in case it is called more than once.
Also renamed the paths #defines to match their new meaning.
Original discussion which led to this patch can be found here:
http://lists.freedesktop.org/archives/xorg-devel/2011-September/025853.html
Signed-off-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Michal Suchanek <hramrach at centrum.cz>
Reviewed-by: Jamey Sharp <jamey at minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
No-one can generated them yet, but if they could, we'd be processing them
like there was no tomorrow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The are the same as device events internally but require the touch ID
separately from the detail.button field (the protocol uses the detail field
for the touch id).
For simpler integration of pointer emulation we need to set the
detail.button field while keeping the touchid around.
Add the three new touch event types to the various places in the server
where they need to be handled. The actual handling of the events is somewhat
more complicated in most places.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
TOUCH_CLIENT_ID is set if the touch was generated from a client ID instead
of a DDX/driver touch ID. i.e. submitted by the dix.
TOUCH_END is a special flag that's required to force the touch to end.
Since the protocol with grab replaying and pointer emulation is rather
complex, it's quite hard to know otherwise when a touch sequence should
really die.
The others do what it says on the imaginary box.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Plus, use the actual definition from the protocol instead of the numeric
values. Turns out not everyone knows the protocol event IDs by heart.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Previous declaration required the use of a message + printf varargs. We
obviously want to allow the use of just a message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Not including GenericEvents
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Walter Harms <wharms@bfs.de>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No functional changes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
They achieve the same thing, re-use the more generic InputLevel so we can
convert to/fro easier.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The changed logic means we don't require the explicit grab = NULL setting
and early exit anymore. Not 100% of it, but if we see that message pop up in
a log we know it's broken.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Effective functional change: XI2 events are checked with XACE now.
DeliverOneGrabbedEvent is exported for future use by touch events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Currently unused, but will be in the future.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes gcc warnings such as:
inpututils.c: In function 'valuator_mask_isset':
inpututils.c:498:5: warning: cast discards qualifiers from pointer target type
inpututils.c: In function 'CountBits':
inpututils.c:613:9: warning: cast discards qualifiers from pointer target type
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Allows callers to avoid deconstifying arguments when calling, fixing
gcc warning:
filter.c: In function 'PictureGetFilterId':
filter.c:59:2: warning: cast discards qualifiers from pointer target type
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Almost all of the places the string is assigned point to a literal
string constant, so use const char * for those, and const char **
for function calls that return it via an argument. Fortunately
the top level function, ClientAuthorized, which returns the string
as its return value is called from only one place, ProcEstablishConnection.
ProcEstablishConnection stores either that return value or a string literal
in char *reason. It only uses reason as an argument to SendConnSetup.
SendConnSetup passes the reason argument to strlen & WriteToClient,
both of which already have const qualifiers on their args.
Thus added const to the reason variable in ProcEstablishConnection
and the reason argument to SendConnSetup.
Fixes gcc warnings:
dispatch.c: In function 'ProcEstablishConnection':
dispatch.c:3711:9: warning: assignment discards qualifiers from pointer target type
auth.c: In function 'CheckAuthorization':
auth.c:218:14: warning: assignment discards qualifiers from pointer target type
auth.c:220:20: warning: assignment discards qualifiers from pointer target type
connection.c: In function 'ClientAuthorized':
connection.c:683:3: warning: return discards qualifiers from pointer target type
mitauth.c: In function 'MitCheckCookie':
mitauth.c:88:13: warning: assignment discards qualifiers from pointer target type
xdmauth.c:259:14: warning: assignment discards qualifiers from pointer target type
xdmauth.c:270:14: warning: assignment discards qualifiers from pointer target type
xdmauth.c:277:11: warning: assignment discards qualifiers from pointer target type
xdmauth.c:293:15: warning: assignment discards qualifiers from pointer target type
xdmauth.c:313:14: warning: assignment discards qualifiers from pointer target type
xdmauth.c:322:11: warning: assignment discards qualifiers from pointer target type
rpcauth.c: In function 'SecureRPCCheck':
rpcauth.c:136:10: warning: assignment discards qualifiers from pointer target type
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
gcc was warning from storing string constants in a char *name field:
auth.c:64:1: warning: initialization discards qualifiers from pointer target type
auth.c:72:1: warning: initialization discards qualifiers from pointer target type
auth.c:81:1: warning: initialization discards qualifiers from pointer target type
Making the field const requires changing AuthorizationFromID to take
a const char ** pointer for the name argument which it sets to point
to the matching name entry.
Changing that argument requires changing its sole caller in the security
extension to pass the address of a const char * variable to it, which it
can do, since the only thing it does with the returned name is to pass
it back to the RemoveAuthorization function that already expects a const
char *name.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
LookupResourceName already returned a const char *, so just needed
to change the variable we're storing the list in to be a const char **
and then add const to the name argument to RegisterResourceName
(which just stores name in the array) and CreateNewResourceType
(which just passes name to RegisterResourceName).
Clears a bunch of gcc warnings of the form:
registry.c:319:5: warning: passing argument 2 of 'RegisterResourceName' discards qualifiers from pointer target type
registry.c:200:1: note: expected 'char *' but argument is of type 'const char *'
and from all the extensions:
damageext.c: In function 'DamageExtensionInit':
damageext.c:490:5: warning: passing argument 2 of 'CreateNewResourceType' discards qualifiers from pointer target type
../include/resource.h:159:26: note: expected 'char *' but argument is of type 'const char *'
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Avoids the dummy-event dance if we have an event type and need to get the
matching XI2 type.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This is needed for touch event processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
__BUG_WARN_MSG is a simple helper to enable call with and without varargs. I
couldn't find a way to otherwise do this without getting gcc warnings.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The current XI2 mask handling is handy for copying (fixed size arrays) but a
pain to deal with otherwise. Add a struct for XI2 masks and the required
accessors.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Not really needed at this point, but will be once touch support is added.
Since grabs are now expected to be allocated/freed with AllocGrab and
FreeGrab, CopyGrab must increase the refcount and duplicate the modifier
masks. Until the callers are switched to use FreeGrab, this introduces
memleaks.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Not needed since the GrabRec is a self-contained struct but will be needed
for the xi2 input mask rework.
FreeGrab already exists, make it available to other callers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No effective functionality change, just cleanup to make this code slightly
more sane.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Makes things a little easier to read.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The example at the top of the file used a struct bar and a list of struct
foos. Use those two throughout instead of a different struct foo for the
examples and for the API documentation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Even with the documentation, the list.c tests are the best examples.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The existing list_add() prepends to the list, but in some cases we need the
list ordered in the way we append the elements.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Ensure ffs, strndup, strlcat, etc. aren't defined by our headers
if they're already defined in the system headers.
This does export the HAVE_FFS, HAVE_STRNDUP, etc. definitions to drivers,
but if you built the Xserver with a libc that had those, and then build
the drivers with a less capable libc, you're going to have problems anyway,
and this should solve some reported problems with conflicts between our
strndup definition and gcc magic for it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Replace multiple methods of checking for functions with AC_CHECK_FUNCS
Replace multiple methods of selecting fallback funcs with AC_REPLACE_FUNCS
Replace HAS_* and NEED_* #defines with autogenerated HAVE_*
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The code that used getisax to check for MMX support was moved to pixman
and removed from the X server by commit eb2d7fe02f.
The code that used HAVE_MKSTEMP was deleted by the Xprint removal in
commit 1c8bd318fb.
All alloca calls were removed by the patch series end in commit 5e363500c8,
and used custom X checks instead of the autoconf HAVE_ALLOCA anyway.
I can find no record of HAVE_GETUID, HAVE_GETEUID, HAVE_LINK, HAVE_MEMMOVE,
HAVE_MEMSET, HAVE_STRCHR, HAVE_STRRCHR, HAVE_GETOPT, HAVE_GETOPT_LONG,
HAVE_DOPRNT, or HAVE_VPRINTF ever being used, and the calls to those
functions are not wrapped in #ifdefs.
(Most of those are in our baseline requirements of C89 & Unix98 anyway.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The record extension needs the major and minor opcodes in the reply
hook, but the request buffer may have been freed by the time the hook
is invoked. Saving the request major and minor codes as the request is
executed avoids fetching from the defunct request buffer.
This patch also eliminates the public MinorOpcodeOfRequest function,
inlining it into Dispatch. Usages of that function have been replaced
with direct access to the new ClientRec field.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
There are plenty of cases that can only be triggered by a real bug in the
server and doing the ErrorF dance manually everywhere is a tad painful and
the error message is usually used only to find the spot in the file anyway.
Plus, reading BUG_WARN somewhere is a good indicator to the casual reader
that this isn't intended behaviour.
Note that this is intentionally different to the BUG_ON behaviour on the
kernel, we do not FatalError the server. It's just a warning + stacktrace.
If the bug is really fatal, call FatalError.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
And let it return a boolean value, that's all the callers need anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Same bug as inputproto-2.0.1-9-gb1149ab, if the XI2LASTEVENT was a multiple
of 8, the mask was one bit too short.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Cleans up around 120 warnings from this set
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Silencing more gcc -Wwrite-strings warnings
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Now that MakeAtom takes const char *, so can XIGetKnownProperty.
Clears 71 warnings from gcc -Wwrite-strings of the form:
devices.c:145:5: warning: passing argument 1 of 'XIGetKnownProperty' discards qualifiers from pointer target type
../include/exevents.h:128:23: note: expected 'char *' but argument is of type 'const char *'
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Linux test code fixed by: Keith Packard <keithp@keithp.com>
Since the check is for !(compilers that support __builtin_constant_p)
it needs to be !(gcc or new enough Sun cc), but was written as
!(gcc or too old Sun cc).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Any pad bytes in replies are written to the client from a zeroed
array. However, record extension tries to incorrectly access the pad
bytes from the end of reply data.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
This is mainly needed for consistency with GetPointerEvents and friend.
No-one seems to actually need this function from outside the usual DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No effective functional changes, prep work for future patches.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Instead of device and master (and just using master), drop the master
argument and let the callers pass in the device the event is to be sent for.
No effective functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
3304bbff9b added smooth scrolling support for
pointer events and for XIQueryDevice but didn't add the matching parts to
XIDeviceChangedEvents.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Use the same struct for both InputOption and XF86OptionRec so we don't need
to convert to and fro the two in the config backends.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Using this call simplifies callers that don't know if the mask bit is set.
Before:
if (valuator_mask_isset(mask, valnum))
value = valuator_mask_get_double(mask, valnum));
else
value = someothervalue;
Now:
if (!valuator_mask_fetch_double(mask, valnum, &value))
value = someothervalue;
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Co-authored-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
miPointerSetPosition traditionally took coordinates on a per-screen basis,
triggering a screen switch when these went out-of-bounds. For absolute
devices, this prevented screen crossing in the negative x/y direction.
This patch changes the event generation patch to handle screen coordinates
in a desktop range (i.e. all screens together). Screen switches are
triggered when these coordinates are not on the current screen.
This unifies the pointer behaviour of single ScreenRec multihead and
multiple ScreenRecs multihead in that the cursor by default moves about the
whole screen rather than be confined to one single screen. The
transformation matrix may then be used to actually confine the cursor to the
screen again.
Note: fill_pointer_events has to deal with several different coordinate
systems. Make sure you read the comment before trying to understand the code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For Zaphod mode screen crossing handling we need to know the size of all
screens together (i.e. the whole desktop size). Store that in the screenInfo to
have it readily available in events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
udev_enumerate_add_match_tag() and udev_monitor_filter_add_match_tag()
are mostly optimizations, hence simply skip these calls if they are not
available in the installed version of libudev.
This should fix the build on older versions of udev.
[airlied: fixes tinderbox failures on RHEL6]
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
For scroll wheel support, we used to send buttons 4/5 and 6/7 for
horizontal/vertical positive/negative scroll events. For touchpads, we
really want more fine-grained scroll values. GetPointerEvents now
accepts both old-school scroll button presses, and new-style scroll axis
events, while emitting both types of events to support both old and new
clients.
This works with the new XIScrollClass to mark axes as scrolling axes.
Drivers mark any valuators that send scroll events with SetScrollValuator.
(Currently missing: the XIDeviceChangeEvent being sent when a driver changes
a scroll axis at run-time. This can be added later.)
Note: the SCROLL_TYPE enums are intentionally different values to the XI2
proto values to avoid copy/overlapping range bugs.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes, prep work for future changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Return errors instead of silently ignoring them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
POINTER_EMULATED merely sets XIPointerEmulated in the generated
DeviceEvent.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
To be used for smooth scrolling with future driver APIs, replacing
Rel Vert Wheel and Rel Horiz Wheel axes, which have not been used in any
open driver to date.
Combined with double-granularity ValuatorMasks, these axes allow for
fine-grained scroll data to be sent to clients. Future commits allow
drivers to post these scroll axes to
QueuePointerEvents/GetPointerEvents, which take care of emulating legacy
scroll button events.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Change the last real user of a split integer/fractional co-ordinate
system, DeviceIntRec's last->{valuators,remainder} to just have one set
of doubles.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Change the DeviceEvent InternalEvent to use doubles for its valuators,
instead of data and data_frac.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Change RawDeviceEvent to use doubles for valuators internally, rather
than data(_raw) and data(_raw)_frac.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This widens almost all of the float-using code in ptrveloc.[ch] to
doubles, other than values coming from properties which are specified to
be floats by the property API.
Bumps input API to v14 as this changes the AccelScheme signature, as
used by xf86-input-synaptics.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Add API for valuator_mask that accepts and returns doubles, rather than
ints. No double API is provided for set_range at the moment.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Switch the ValuatorMask struct to using doubles instead of ints for the
actual values. Preserve the old int API, and (attempt to) round towards
zero for values we return.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a flags member which will be copied wholesale into the resultant
xXIDeviceEvent.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
1) The error attribute appeared in gcc-4.3
2) The return type of __builtin_constant_p is int
3) Sun Studio 12.0 and later builtin support for __builtin_constant_p
Found by Tinderbox.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
The more recent inclusions of this file haven't been checking for
HAVE_STDINT_H, so might as well make the older ones consistent.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
If the address of the swapped memory location is known at compile time,
we can check its alignment at no runtime cost and use lswapl instead.
text data bss dec hex filename
before: 1872820 52136 78040 2002996 1e9034 hw/xfree86/Xorg
after: 1864396 52136 78040 1994572 1e6f4c hw/xfree86/Xorg
bswap instructions: 131 -> 308 (used in lswapl)
rol instructions: 943 -> 1174 (used in lswaps)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Should be safe since cpswap isn't used on pointers.
text data bss dec hex filename
before: 1875588 52136 78040 2005764 1e9b04 hw/xfree86/Xorg
after: 1872820 52136 78040 2002996 1e9034 hw/xfree86/Xorg
bswap instructions: 5 -> 131 (used in lswapl)
rol instructions: 811 -> 943 (used in lswaps)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
The original macros are retained (instead of replacing them with inline
functions) because of implicit type promotion. That is, an int16 passed
to an inline function taking int32 would be implicitly promoted to int32
without a warning.
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
gcc generates better code with fabs() anyway.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Appears to be leftover from the Kerberos code deleted in 2007
(commit dfbe32b5b8).
Nothing left ever set clientState to ClientStateAuthenticating
Skipped over 1 to preserve existing enum numbering.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Use new per-screen privates API instead.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Appear to be leftovers from the XC-QUERY-SECURITY code deleted in 2007
(commit 375864cb74).
Nothing left ever set clientState to ClientStateCheckingSecurity.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
"configure --with-int10" is not a valid configuration, and the check for
sys/vm86.h and sys/io.h is not used. Delete it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
InputOptions is not switched to use struct list for a future patch to unify
it with the XF86OptionRec.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This is a set of macros to provide a struct list-alike interface for classic
linked lists such as the XF86OptionRec or the DeviceIntRec. The typical
format for these is to have a "struct foo *next" pointer in each struct foo
and walk through those. These macros provide a few basic functions to add to,
remove from and iterate through these lists.
While struct list is in some ways more flexible, switching legacy code to
use struct list is not alway viable. These macros at least reduce the amount
of open-coded lists.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
getevents.c already had that function, but XKB was manually initializing it,
causing bugs when the event structure was updated in one place but not the
other.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetMaster() currently requires an attached slave device as parameter,
resuling in many calls being IsFloating(dev) ? dev : GetMaster(...);
Add two new parameters so GetMaster can be called unconditionally to get the
right device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Add support for multi-seat-aware input device hotplugging. This
implements the multi-seat scheme explained here:
http://www.freedesktop.org/wiki/Software/systemd/multiseat
This introduces a new X server switch "-seat" which allows configuration
of the seat to enumerate hotplugging devices on. If specified the value
of this parameter will also be exported as root window property
Xorg_Seat.
To properly support input hotplugging devices need to be tagged in udev
according to the seat they are on. Untagged devices are assumed to be on
the default seat "seat0". If no "-seat" parameter is passed only devices
on "seat0" are used. This means that the new scheme is perfectly
compatible with existing setups which have no tagged input devices.
Note that the -seat switch takes a completely generic identifier, and
that it has no effect on non-Linux systems. In fact, on other OSes a
completely different identifier scheme for seats could be used but still
be exposed with the Xorg_Seat and -seat.
I tried to follow the coding style of the surrounding code blocks if
there was any one could follow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
LogVHdrMessageVerb allows a custom header to be inserted in a log message,
between the Log system's MessageType string, and a formatted variable
message body. The custom header can itself be a formatted variable string.
These functions can be used, for example, by driver abstraction layers to
format specific driver messages in a standard format, but do it in a way
that is efficient, obeys the log-layers verbosity settings, and is safe
to use in signal handlers (because they don't call malloc), even for
types besides X_NONE.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The composite extension spec says that window background painting
should be inhibited when the subwindow redirection mode is set to
manual.
This eliminates the ugly flashing effect when compiz unredirects a
fullscreen window.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Owen Taylor <otaylor@fishsoup.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of just closing the log when everything is done, put one more
message in stating that we're actually terminating. Users or scripts that
look at the Xorg.log will then know that a) the server has terminated
properly and b) why the server terminated (to some degree, given that most
real-world errors will be caused by AbortServer()).
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
RawEvents are supposed to be events coming from the driver. When warping the
pointer, this should not generate a raw event.
X.Org Bug 30068 <http://bugs.freedesktop.org/show_bug.cgi?id=30068>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add four new private XKB actions for debugging:
* PrGrbs: print active grabs to the log file
* Ungrab: ungrab all currently active grabs
* ClsGrb: kill clients with active grabs
* PrWins: dump the current window tree to the log file
To use these, you need to modify your XKB maps, e.g. the following to
have Ctrl+Alt+(F9-F12) mapped to the above:
- compat/xfree86:
interpret XF86LogGrabInfo {
action = Private(type=0x86, data="PrGrbs");
};
interpret XF86Ungrab {
action = Private(type=0x86, data="Ungrab");
}
interpret XF86ClearGrab {
action = Private(type=0x86, data="ClsGrb");
}
interpret XF86LogWindowTree {
action = Private(type=0x86, data="PrWins");
}
- symbols/pc:
key <FK09> { type="CTRL+ALT", [ Return, XF86LogGrabInfo ] };
key <FK10> { type="CTRL+ALT", [ Return, XF86Ungrab ] };
key <FK11> { type="CTRL+ALT", [ Return, XF86ClearGrab ] };
key <FK12> { type="CTRL+ALT", [ Return, XF86LogWindowTree ] };
At the moment, this only works if the grabbing client continues to call
AllowEvents, as the server does no event processing at all when a device
is frozen.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rewrite PrintWindowTree to make it actually tell you what you want to
know.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No functional changes, prep work for future changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Implements pointer barriers as specified by version 5 of the XFIXES
protocol. Barriers are axis-aligned, zero-width lines that block pointer
movement for relative input devices. Barriers may block motion in either
the positive or negative direction, or both.
v3:
- Fix off-by-one in version_requests array
- Port to non-glib test harness
- Fix review notes from Søren Sandmann Pedersen, add tests to match
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Providing an argument to return in a function with void return type
is not allowed by the C standard, and makes the Sun compilers unhappy.
(They actually flag it as an error, unless using a new enough version
to be able to downgrade it to a warning with "-features=extensions".)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
In some cases, knowing about the device model number and the device's vendor
is important to activate product-specific settings. Since this is
nonetheless driver-specific, only provide the property but don't do anything
with it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Since the server has little choice (or even knowledge) of the actual device
node used by the driver, this property is merely provided for
standardisation. It is up to the driver to set it to the appropriate value,
usually a device node in the form of /dev/input/event0 or similar.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
This struct was unused and has been effectively removed in
commit 633b81e8ba
Refs: xorg-server-1.10.0-133-g633b81e
Remove the remainder, with an ABI bump to 13.0.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Compare two version numbers in the major.minor form.
Switch the few users of manual version switching over to the new function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This isn't currently used by any of the callers but it will likely be in the
future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Previously, it only took DeviceEvents, but it would be much more useful
if it took InternalEvents. Any event that activates a grab must still
be a DeviceEvent, so put in a check to enforce this.
Change all callers to make the appropriate casts.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The macro is sufficient if called during a development cycle, but not
sufficient information when triggered by a user (e.g.
https://bugzilla.redhat.com/show_bug.cgi?id=688693).
Expand what this does to print the event content and a backtrace, so at
least we know where we're coming from. Only the first 32 bytes are printed
since if something goes wrong, the event we have is almost certainly an
xEvent or xError, both restricted to 32 bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Grabbing an SD device temporary floats the device but we must not release
the buttons. Introduced in
commit 9d23459415
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Fri Feb 25 11:08:19 2011 +1000
dix: release all buttons and keys before reattaching a device (#34182)
X.Org Bug 36146 <http://bugs.freedesktop.org/show_bug.cgi?id=36146>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Does what it says on the box: returns the deepest child window in a
given sprite's trace.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The interface to RegionInit():
RegionInit (RegionPtr pReg, BoxPtr rect, int size);
is very confusing because it doesn't take a list of boxes, it takes
*one* box, but if that box is NULL, it initializes an empty region
with 'size' rectangles preallocated.
Most callers of this function were correctly passing either NULL or
just one box, but there were three confused cases, where the code
seems to expect a region to be created from a list of boxes.
This patch adds a new function RegionInitBoxes() and fixes those
instances to call that instead.
And yes, the pixman function to initialize a region from a list of
boxes is called init_rects() because pixman is also awesome.
V2: Make RegionInitBoxes() return a Bool indicating whether the call
succeeded, and fix the callers to check this return value.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Søren Sandmann <ssp@redhat.com>
Don't confuse users with a return type of short, that's even less indicative
that it returns 0/non-0 than "int".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
commit 678f5396c9 only fixed the
initialization, not the copy. After a slave device change, the valuator
were out of alignment again.
X.Org Bug 36119 <http://bugs.freedesktop.org/show_bug.cgi?id=36119>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Michel Dänzer
Jon Turney
Alan Coopersmith
Dave Airlie
Keith Packard
Brian M. Clapper
Alex Goins
Hans de Goede
Peter Hutterer
Dave Airlie
Adam Jackson
Olivier Fourdan
Jonas Ådahl
Laércio de Sousa
Chris Wilson
Daniel Stone
Thomas Klausner
Michael Stapelberg
Jamey Sharp
Ray Strode
Emil Velikov
Michal Srb
Michel Dänzer
Peter Harris
Thierry Reding
Dinar Valeev
Max Filippov
Robert Ancell
Alexey Brodkin
Eric Anholt
Kristian Høgsberg
Rui Matos
Łukasz Stelmach
Andreas Schwab
Egbert Eich
Julien Cristau
Maarten Lankhorst
Andreas Müller
Robert Morell
Marcin Slusarz
Jasper St. Pierre
Ryan Pavlik
Aaron Plattner
Daniel Stone
Yuly Novikov
Thomas Jaeger
Yaakov Selkowitz
Benjamin Tissoires
Chase Douglas
Jeremy Huddleston Sequoia
Tomas Carnecky
Simon Thum
Michal Suchanek
Daniel Kurtz
Erkki Seppälä
Rami Ylimäki
Antoine Martin
Alexandr Shadchin
Tiago Vignatti
Lennart Poettering
Matt Turner
Ville Syrjälä
Søren Sandmann Pedersen