Create extinit.h (and xf86Extensions.h, for Xorg-specific extensions) to
hold all our extension initialisation prototypes, rather than
duplicating them everywhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
externsion.h required bits from Xfuncproto.h and dixstruct.h, but
included neither; fix that.
It also had _XFUNCPROTOBEGIN and _XFUNCPROTOEND wrappers, which is a bit
pointless for a server-only library, as it's only needed for C++.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Does what it says on the box, replacing those from Xi/ and glx/.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds new function padding_for_int32() and uses existing pad_to_int32()
depending on required results.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Each DDX currently calls OsReleaseSIGIO in case it was suspended when
the server regen started. This causes a BUG to occur if SIGIO was
*not* blocked at that time. Instead of relying on each DDX, make the
OS layer reliably reset all signal state at server init time, ensuring
that signals are suitably unblocked and that the various signal state
counting variables are set back to zero.
Signed-off-by: Keith Packard <keithp@keithp.com>
For DRI2 in some offload cases we need to set a new pixmap on the crtc,
this hook allows dri2 to call into randr to do the necessary work to set
a pixmap as the scanout pixmap for the crtc the drawable is currently on.
This is really only to be used for unredirected full screen apps in composited
environments.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
add the linked list and provider hooks.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds two functions for drivers to use directly to keep a
linked list of slave pixmaps to do damage tracking on and keep
updated. It also adds a helper function that drivers may optionally
call to do a simple copy area damage update.
v2: use damage.h not damagestr.h, fixes ephyr build.
v3: address ajax review: use slave_dst, drop unused dst member.
v4: check DamageCreate return, add SourceValidate comment,
add a comment addressing possible optimisation possibility
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When randr notices a crtc configuration request for a slave device,
it checks if the slave allocated pixmap exists and is suitable,
if not it allocates a new shared pixmap from the master, shares
it to the slave, and starts the master tracking damage to it,
to keep it updated from the current front pixmap.
If the resize means the crtc is no longer used it will destroy
the slave pixmap.
This adds the concept of a scanout_pixmap to the randr_crtc object,
and also adds a master pixmap pointer to the pixmap object, along
with defining some pixmap helper functions for getting pixmap box/regions.
v2: split out pixmap sharing to a separate function.
v3: update for void *
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a hooks for pixmap sharing and tracking.
The pixmap sharing ones get an integer handle for the pixmap
and use a handle to be the backing for a pixmap.
The tracker interface is to be used when a GPU needs to
track pixmaps to be updated for another GPU.
v2: pass slave to sharing so it can use it to work out driver.
v3: use void * as per keithp's suggestion.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just add the interfaces to attach/detach output slaves, and
a linked list to keep track of them. Hook up the randr providers
list to include these slaves.
v1.1: add another assert to the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This list is meant for attaching unbound gpu screens to initially,
before the client side rebinds them.
v1.1: add another assert in the add path.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds callbacks into the ddx for udev gpu hotplug.
v2: fix some strncmp returns.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch introduces gpu screens into screenInfo. It adds interfaces
for adding and removing gpu screens, along with adding private fixup,
block handler support, and scratch pixmap init.
GPU screens have a myNum that is offset by GPU_SCREEN_OFFSET (256),
this is used for logging etc.
RemoveGPUScreen isn't used until "xfree86: add platform bus hotplug support".
v2: no glyph pictures for GPU screens for now.
v3: introduce MAXGPUSCREENS, fix return value check
v4: fixup myNum when renumbering screens (ajax)
v5: drop cursor privates for now.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
On Linux in order for future hotplug work, we are required to interface
to udev to detect device creation/removal. In order to try and get
some earlier testing on this, this patch adds the ability to use
udev for device enumeration on Linux.
At startup the list of drm/kms devices is probed and this info is
used to load drivers.
A new driver probing method is introduced that passes the udev
device info to the driver for probing.
The probing integrates with the pci probing code and will fallback
to the pci probe and old school probe functions in turn.
The flags parameter to the probe function will be used later
to provide hotplug and gpu screen flags for the driver to behave
in a different way.
This patch changes the driver ABI, all drivers should at least
be set with a NULL udev probe function after this commit.
v2: rename to platform bus, now with 100% less udev specific,
this version passes config_odev_attribs around which are an array
of id/string pairs, then the udev code can attach the set of attribs
it understands, the OS specific code can attach its attrib, and then
the core/drivers can lookup the required attribs.
also add MATCH_PCI_DEVICES macro.
This version is mainly to address concerns raised by ajax.
v3: Address comments from Peter.
fix whitespace that snuck in.
rework to use a linked list with some core functions that
xf86 wraps.
v4: add free list, fix struct whitespace.
ajax this address most of your issues?
v5: drop probe ifdef, fix logic issue
v6: some overhaul after more testing.
Implement primaryBus for platform devices.
document hotplug.h dev attribs - drop sysname attrib
fix build with udev kms disabled
make probing work like the PCI probe code,
match against bus id if one exists, or primary device.
RFC: add new bus id support "PLAT:syspath". we probably
want to match on this a bit different, or use a different
property maybe. I was mainly wanting this for use with
specifying usb devices in xorg.conf directly, but PLAT:path
could also work I suppose.
v6.1: add missing noop platform function
v7: fix two interactions with pci probing and slot claiming, prevents
pci and platform trying to load two drivers for same slot.
v8: test with zaphod mode on -ati driver, fixup resulting issue
clean up common probe code into another function, change busid
matching to allow dropping end of strings.
v9: fix platform probing logic so it actually works.
v9.1: fix pdev init to NULL properly.
v10: address most of Keith's concerns.
v4 was thanks to Reviewed-by: Adam Jackson <ajax@redhat.com>
v5 was Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This will permit midispcur to allocate its privates for hotplug outputs
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Screen-specific privates areas are only allocated for objects related
to the target screen; objects allocated for other screens will not
have the private space reserved. This saves memory in these objects
while also allowing hot-plug screens to have additional private
allocation space beyond what the core screens are using.
Drivers are encouraged to switch to this mechanism as it will reduce
memory usage in multi-GPU environments, but it is only required for
drivers which will be loaded after the server starts, like
modesetting.
Objects providing screen-specific privates *must* be managed by the
screen-specific private API when allocating or initializing privates
so that the per-screen area can be initialized properly.
The objects which support screen-specific privates are:
Windows
Pixmaps
GCs
Pictures
Extending this list to include Colormaps would be possible, but
require slightly more work as the default colormap is created before
all colormap privates are allocated during server startup, and hence
gets a bunch of special treatment.
Of particular note, glyphs are *not* capable of supporting
screen-specific privates as they are global objects, not allocated on
a screen-specific basis, and so each driver must be able to see their
privates within the glyph.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Let the dix be in charge of changing the sigprocmask so we only have one
entity that changes it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This merge includes a minor fixup for '%p' arguments; must cast to
uintptr_t instead of uint64_t as we use -Werror=pointer-to-int-cast
which complains when doing a cast (even explicitly) from a pointer
to an integer of different size.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ErrorF() is not signal safe. Use ErrorSigSafe() whenever an error
message may be logged in signal context.
[whot: edited to "ErrorFSigSafe"]
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
[whot: edited to use varargs, squashed commit below]
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
os: fix vararg length calculation
Make %u and %x sizeof(unsigned int), %p sizeof(void*). This is printf
behaviour and we can't guarantee that void* is uint64_t anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No other Xfont consumer used it, and this saves us from having to link
callers against libXfont for one simple function when doing
-no-undefined symbols builds.
The function is given a new name to avoid clashing with existing libXfont
binaries, but a #define is provided to preserve the API so we don't have
to fix all the callers at the same time.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This code existed in 3 different forms, perhaps it should be
consolidated.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Why sending the number of the (implementation-dependent) error statement to
the client is a good idea is a bit beyond me, but at least document it so we
can all share the despair.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This will be used for checking for proper logging when in signal
context.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
f3410b97cf introduced a regression on server
shutdown. If any button or key was held on shutdown (ctrl, alt, backspace
are usually still down) sending a raw event will segfault the server. The
the root windows are set to NULL before calling CloseDownDevices().
Avoid this by disabling all devices first when shutting down. Disabled
devices won't send events anymore.
Master keyboards must be disabled first, otherwise disabling the pointer
will trigger DisableDevice(keyboard) and the keyboard is removed from the
inputInfo.devices list and moved to inputInfo.off_devices. A regular loop
through inputInfo.devices would thus jump to off_devices and not recover.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Helper functions to avoid things like
if (foo) {
BUG_WARN(foo);
return 1;
}
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This is a squash merge containing all the API changes, as
well as the video ABI bump.
Its been squashed to make bisection easier.
Full patch log below:
commit b202738bbf0c5a1c1172767119c2c71f1e7f8070
Author: Aaron Plattner <aplattner@nvidia.com>
Date: Mon May 14 15:16:11 2012 -0700
xfree86: Bump video ABI to 13.0
The ABI was broken by changes to convert from screen index numbers to ScreenPtr
/ ScrnInfoPtr in various structures and function signatures.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d5f7d9f8d408bcad3f83277d255f25d3b0edbf3
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 10:56:57 2012 +0100
xf86: xf86ClearEntityListForScreen should take a pScrn
When adding GPU screens this make life easier.
(also fix comment, as pointed out by Alan)
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit afee8b5ab4501597ecc1ade34124d7ca227ab055
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 24 07:07:32 2012 +0100
xf86i2c: add pscrn for drivers to use
This just adds a pScrn pointer into the struct for the drivers to use
instead of scrnIndex. Mostly scrnIndex is used for logging, but some
drivers use it to lookup xf86Screens, so let them stash a pScrn instead.
Removing the scrnIndex is a bit more involved and I'm not sure its worth
the effort. Doing i2c in the X server is legacy code as far as I'm concerned.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit ea5092f1f679691d187f1eee9427e6057beec56e
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 19:25:20 2012 +0100
dix/gc: consolidate GC object creation in one place
The standard GC create and scratch GC create were 90% the same really,
and I have a need in the future for creating GC objects without the
other bits, so wanted to avoid a third copy.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3d91482ea9b4883e64e496f2768168e0ffa21ba1
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 10:24:06 2012 +0100
xf86: add a define to denote the new non-index interfaces are being used
This can be used by drivers to provide compatible APIs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 37c3ae3e6cd4f3dedc72f371096d6743f8f99df3
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 15:09:12 2012 +0100
dix: make Create/Free scratch pixmaps take a ScreenPtr
While technically an API/ABI change I doubt anyone uses it,
but it helps in splitting screens up.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 75f2062a3fe94f04764ecc7d2ff2fbbeccb9da60
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:57:55 2012 +0100
xf86/xv: remove scrnIndexfrom xf86FindXvOptions.
Move this interface to taking an ScrnInfoPtr.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit f80c2374f40ea7b2ee0556e2e76cc07406f3d843
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:53:59 2012 +0100
xf86: make xf86DeleteScreen take a ScrnInfoPtr (v2)
stop passing indices into this function.
v2: drop flags argument.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 58824e414f35682435f15bfe6c4b656bd90b9235
Author: Dave Airlie <airlied@redhat.com>
Date: Wed May 23 14:48:09 2012 +0100
xf86: fix xf86IsScreenPrimary interface to take a pScrn (API/ABI)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 6b4fc1f9d391bcdf7ca288766e49bce60f4635cd
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:18:59 2012 +0100
xserver: convert block/wakeup handlers to passing ScreenPtr (ABI/API) (v2)
Instead of passing an index, pass the actual ScreenPtr. This allows
more moving towards not abusing xf86Screens + screenInfo.
v2: drop the blockData/wakeupData args as per ajax's suggestion.,
fix docs.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 790d003de20fb47674420a24dadd92412d78620d
Author: Dave Airlie <airlied@gmail.com>
Date: Wed Apr 11 09:53:14 2012 +0100
xf86/common: remove some more pScrn->pScreen uses
remove some more conversions that appeared after api cleanups.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aac85e18d1dd093f2cad6bd29375e40bd7af0b8f
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:34:53 2012 +0100
ddc: change API to take ScrnInfoPtr (v2)
This removes all xf86Screens usage from ddc code,
it modifies the API for some functions to avoid taking indices.
v2: address Alan's comments about dropping DDC2Init parameter.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit fe3f57b6eaf6860a33876a54f9439f69578f03a5
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:31:26 2012 +0100
vbe: don't use index for VBEInterpretPanelID (API)
Remove use of xf86screens from vbe module.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit abf1965f4ed91529036d3fdb470d6a3ce6f29675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 16:25:11 2012 +0100
int10/vbe: don't use xf86Screens. (ABI) (v3)
Pass the ScrnInfoPtr instead of the index in the int10 struct.
This saves us using it to dereference xf86Screens.
v2: address Alan's comment to fix struct alignment.
v3: squash in all the int10 fixes, test the vm86 code builds,
after comments by Keith.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 23cca612b4fb5efc33683c7624b803b457387e3d
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:30:18 2012 +0100
xserver: drop index argument to ScreenInit (ABI/API) (v2)
This drops the index argument, its the same as pScreen->myNum,
and its the last major index abuse I can find.
v2: address Alan's review - update docs, fix xwin/xnest/darwin
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 40d360e2d7e832407f3ed64e3a02c27ecc89a960
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:23:01 2012 +0100
xf86: migrate PointerMoved from index to ScrnInfoPtr (ABI/API)
This migrates PointerMoved from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit aa60a2f38679d0eeb979a9c2648c9bc771409bf9
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:20:46 2012 +0100
xf86: migrate PMEvent to a ScrnInfoPtr (ABI/API)
This migrates the PMEvent from index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d3f28ef44371ed4a039ffc5dd7eb6408d1269ba2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:18:30 2012 +0100
xf86: migrate SetDGAMode from index to ScrnInfoPtr (ABI/API)
This migrates the SetDGAMode callback from an index to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit baf5e4818a74f2b68c3dfdcc56f54322351039a0
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:14:11 2012 +0100
xf86: migrate ChangeGamma from index to ScrnInfoPtr (ABI/API) (v2)
This migrates the ChangeGamma interface to avoid passing a index.
v2: fix xf86RandR12.c + xf86cmap.c call
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 51e5f90ada929d6b23176090badbb42fdb3fa550
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:11:09 2012 +0100
xf86/exa: migrate index to screen types for EnableDisableFBAccess (ABI/API)
The EXA interface migrates to ScreenPtr,
and the xf86 interface migrated to ScrnInfoPtr.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 94f1f21d17e86f96d4a54292a399160950087675
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 15:02:11 2012 +0100
xf86: migrate ValidMode callback to ScrnInfoPtr (ABI/API)
This migrates the ValidMode to passing a ScrnInfoPtr instead
of an index.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3f8f18198fed4f39ec805b508a3482e91eea26b2
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:59:46 2012 +0100
xf86: migrate SwitchMode to taking ScrnInfoPtr (ABI/API) (v2)
This migrate the SwitchMode interface to take a ScrnInfoPtr
instead of an index.
v2: drop flags.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit d06a038a5c49328ab3a8d969d24f9fcd22c63202
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:50:37 2012 +0100
xf86: move AdjustFrame to passing ScrnInfoPtr (ABI/API) (v2)
This converts AdjustFrame code paths to passing a ScrnInfoPtr
instead of an integer index.
v2: drop flags args.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 53d2f8608ffd4090d08e7d5cf2e92fb954959b90
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:41:27 2012 +0100
xf86: modify FreeScreen callback to take pScrn instead of index. (ABI/API) (v2)
Another index->pScrn conversion.
v2: drop flags arg.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 60db37c0b247052e0f5c54b1921fe58a3609c2e3
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:35:41 2012 +0100
xf86: change EnterVT/LeaveVT to take a ScrnInfoPtr (ABI/API break) (v2)
This modifies the EnterVT/LeaveVT interfaces to take a ScrnInfoPtr
instead of an index into xf86Screens. This allows dropping more
public dereferences of the xf86Screens and screenInfo.
v2: drop flags args as suggested by Keith, fix docs.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 06729dbbc804a20242e6499f446acb5d94023c3c
Author: Dave Airlie <airlied@gmail.com>
Date: Tue Apr 10 14:04:59 2012 +0100
xserver: remove index from CloseScreen (API/ABI breakage)
This drops the index from the CloseScreen callback,
its always been useless really, since the pScreen contains it.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to use udev for gpu enumeration, we need to init udev earlier
than input initialisations. This splits the config init stuff so that udev
pre init sets up before output initialisation.
this is just a prepatory patch, doesn't change anything major.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is only called from the enterleave implementation, so move it and its
helper functions to there. No functional changes.
Fixes build error introduced in 31174565ec if
building with '-Werror=implicit-function-declaration'
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
../../include/xkbsrv.h:308:51: warning: redundant redeclaration of
‘DeviceKeyPress’ [-Wredundant-decls]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Both Cygwin and MinGW can use Windows' native CryptoAPI for SHA1,
saving a dependency on libgcrypt or OpenSSL. The necessary functions
are in ADVAPI32.DLL, which is among the default lib flags and is
already used in hw/xwin for accessing the registry.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Normal snprintf() usually returns the number of bytes that would have been
written into a buffer had the buffer been long enough.
The scnprintf() variants return the actual number of bytes written,
excluding the trailing '\0'.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This option specifies a file descriptor in the launching process. X
will scan for an available display number and write that number back to
the launching process, at the same time as SIGUSR1 generation. This
means display managers don't need to guess at available display numbers.
As a consequence, if X fails to start when using -displayfd, it's not
because the display was in use, so there's no point in retrying the X
launch on a higher display number.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The function will be used for building a sprite for pointer emulation
after an explicit device grab. This commit refactors the code so that
TouchBuildSprite will function with any event type and moves the checks
to the caller.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This will be used for accepting and rejecting touches in the future.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The ResourceSizeRec now contains the number of references to the
resource. For example a Pixmap knows this value and it can be useful
for determining the "weight" of the resource. Typically this value
is 1.
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Calls to Hash(client, id) were replaced with calls directly to
HashResourceID(id, clientTable[client].hashsize) and the Hash-function
was removed.
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
The public hashing function HashResourceID uses the same hashing
hashing algorithm as resource.c uses internally, but it provides an
interface that will is usable by external modules. It provides a
parameter for the number of bits for the hash, instead of finding the
size from its internal hash table.
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
The mechanism allows iterating even through subresources that don't
have specific XID's. When such 'resources' are iterated, the XID for
them will be zero. A resource type can assign an iteration function
for its subresources with SetResourceTypeFindSubResFunc; by default
resources are assumed not to contain subresources.
The purpose of this extension is to enable accurate accounting of
the resources a resource consumes or uses.
This patch provides the subresource iteration functions for Windows
and GCs.
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
This patch implements a part of the XResource extension v1.2 (as specified in
http://patchwork.freedesktop.org/patch/2720/ ). The request implemented is
X_XResQueryClientIds.
This patch depends on the feature introduced by
1e933665be "dix: Add facilities for
client ID tracking." .
This latest version also adds Doxygen-formatted comments and takes a better
notice of coding conventions (as in http://www.x.org/wiki/CodingStyle ).
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Previously, we only had one idle alarm that was triggered for all devices,
whenever the user used any device, came back from suspend, etc.
Add system SyncCounters for each device (named "DEVICEIDLETIME x", with x
being the device id) that trigger on that device only. This allows for
enabling/disabling devices based on interaction with other devices.
Popular use-case: disable the touchpad when the keyboard just above the
touchpad stops being idle.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: James Jones <jajones@nvidia.com>
Preparation work for per-device idle counters.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: James Jones <jajones@nvidia.com>
If there is only one listener of a touch, the listener is a grab, and is
accepted before the touch has ended, the current code will not end the
touch record when the touch does end.
This change adds a listener state for when a touch is accepted but has
not yet ended. We now keep the touch record alive in this state, but end
it when the touch ends.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This doesn't really implement early accept as it should. Ideally, the
server should send end events to all subsequent touch clients as soon as
an early accept comes in. However, this implementation is still protocol
compliant. We can always improve it later.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This function is mostly correct for early reject usage. With a small
change to pass the client resource explicitly and making the
TouchOwnership event optional, it is usable for all rejection scenarios.
This change exports it for use outside Xi/exevents.c and modifies the
name accordingly.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Rename functions/macros from list_* to xorg_list_*
Rename struct from struct list to struct xorg_list.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In-sed-I-trust: Peter Hutterer <peter.hutterer@who-t.net>
ErrorF output is prefixed with a timestamp, so the previous output would
look like this:
[ 50.423] BUG: triggered 'if (dev->valuator->numAxes < 2)'
BUG: getevents.c:842 in scale_to_desktop()
Change this to have the prefix on both lines:
[ 50.423] BUG: triggered 'if (dev->valuator->numAxes < 2)'
[ 50.423] BUG: getevents.c:842 in scale_to_desktop()
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
sizeof(ClientRec) ILP32 LP64
before 120 184
after 104 136
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
According to Daniel Kurtz, a typedef void *pointer is a atomic type. So a
'const pointer' is equivalent to 'void* const' instead of the intended
'const void*'.
This technically changes the ABI, but we don't bump it for this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Leftover code from an earlier version of GetTouchEvents.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
For touch events with pointer emulation, the event that triggers the grab
(the pointer event) is not the same as the actual event (the touch event).
For replaying, we need to store the real event then.
No effective changes at this point, for the current caller event and
real_event are identical.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Does not include pointer emulation handling.
Does include partial ownership handling but not the actual processing of
ownership events.
Note: this commit is a retroactive commit extracted from a series of ~50
commits and may thus appear a bit more complicated than what you'd write out
from scratch.
Pointer processing tree is roughly:
- ProcessOtherEvents
- ProcessTouchEvents
- DeliverTouchEvents
- DeliverTouchBeginEvent|DeliverTouchEndEvent|...
- DeliverOneTouchEvent
Also hooks up the event history playing to the right function now.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Co-authored-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The first listener in the sequence is the owner of the touch sequence.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The DIX will call TouchSetupListeners once for a new touch. After that
the listener list remains static, with listeners only dropping out when they
either reject the grab or disappear.
Exception: if grabs activate they are prefixed to the listeners.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Returns the respective pointer event type for a given touch event type.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Touch events' sprite trace stays the same for the duration of the touch
sequence.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
If touch client has not registered for ownership events and a grab above
that client is rejected, the client needs to receive the complete event
history.
The history currently doesn't really do fancy overflow handling. We assume
that the first TOUCH_HISTORY_SIZE events are the important ones and anything
after that is dropped. If that is a problem, fix the client that takes > 100
event to decide whether to accept or reject.
Events marked with TOUCH_CLIENT_ID or TOUCH_REPLAYING must not be stored in
the history, they are events created by the DIX to comply with the protocol.
Any such event should already be in the history anyway.
A fixme in this patch: we don't have a function to actually deliver the
event yet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No callers yet. This API is not to be used by drivers, it's an API for the
DIX which will create ownership events mainly on touch acceptance/rejection.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The DIX touchpoints are the ones used for event processing.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
DDX touch points are the ones that keep records of the driver-submitted
touchpoints. They're unaffected by the grab state and terminate on a
TouchEnd submitted by the driver.
The client ID assigned is server-global.
Since drivers usually submit in the SIGIO handler, we cannot allocate in the
these functions.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
These structs will be used to store touch-related data, events and
information.
Drivers must call InitTouchClassDeviceStruct to set up a multi-touch capable
device.
Touchpoints for the DDX and the DIX are handled separately - touchpoints
submitted by the driver/DDX will be stored in the DDXTouchPointInfoRec. Once
the touchpoints are processed by the DIX, new TouchPointInfoRecs are created
and stored. This process is already used for pointer events with the
last.valuators field.
Note that this patch does not actually add the generation of touch events,
only the required structs.
TouchListeners are (future) recipients of touch or emulated pointer events.
Each listener is in a state, depending which event they have already
received. The type of listener defines how the listener got to be one.
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
xf86PostTouchEvent is the driver API to submit touch events to the server.
This API doesn't do anything yet though but now we can at least bump the
API.
For valuators, drivers should use the existing xf86InitValuatorAxisStruct
function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This patch applies most of the protocol conversions and the internal event
type for ownership events.
Note that ownership events are generated by the DIX only, they do not pass
through the event queue.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This allows us to run the server as a normal user whilst still
being able to use the -modulepath, -logfile and -config switches
We define a xf86PrivsElevated which will do the checks and cache
the result in case it is called more than once.
Also renamed the paths #defines to match their new meaning.
Original discussion which led to this patch can be found here:
http://lists.freedesktop.org/archives/xorg-devel/2011-September/025853.html
Signed-off-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Michal Suchanek <hramrach at centrum.cz>
Reviewed-by: Jamey Sharp <jamey at minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
No-one can generated them yet, but if they could, we'd be processing them
like there was no tomorrow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The are the same as device events internally but require the touch ID
separately from the detail.button field (the protocol uses the detail field
for the touch id).
For simpler integration of pointer emulation we need to set the
detail.button field while keeping the touchid around.
Add the three new touch event types to the various places in the server
where they need to be handled. The actual handling of the events is somewhat
more complicated in most places.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
TOUCH_CLIENT_ID is set if the touch was generated from a client ID instead
of a DDX/driver touch ID. i.e. submitted by the dix.
TOUCH_END is a special flag that's required to force the touch to end.
Since the protocol with grab replaying and pointer emulation is rather
complex, it's quite hard to know otherwise when a touch sequence should
really die.
The others do what it says on the imaginary box.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Plus, use the actual definition from the protocol instead of the numeric
values. Turns out not everyone knows the protocol event IDs by heart.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Previous declaration required the use of a message + printf varargs. We
obviously want to allow the use of just a message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Not including GenericEvents
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Walter Harms <wharms@bfs.de>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No functional changes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
They achieve the same thing, re-use the more generic InputLevel so we can
convert to/fro easier.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The changed logic means we don't require the explicit grab = NULL setting
and early exit anymore. Not 100% of it, but if we see that message pop up in
a log we know it's broken.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Effective functional change: XI2 events are checked with XACE now.
DeliverOneGrabbedEvent is exported for future use by touch events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Currently unused, but will be in the future.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes gcc warnings such as:
inpututils.c: In function 'valuator_mask_isset':
inpututils.c:498:5: warning: cast discards qualifiers from pointer target type
inpututils.c: In function 'CountBits':
inpututils.c:613:9: warning: cast discards qualifiers from pointer target type
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Allows callers to avoid deconstifying arguments when calling, fixing
gcc warning:
filter.c: In function 'PictureGetFilterId':
filter.c:59:2: warning: cast discards qualifiers from pointer target type
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Almost all of the places the string is assigned point to a literal
string constant, so use const char * for those, and const char **
for function calls that return it via an argument. Fortunately
the top level function, ClientAuthorized, which returns the string
as its return value is called from only one place, ProcEstablishConnection.
ProcEstablishConnection stores either that return value or a string literal
in char *reason. It only uses reason as an argument to SendConnSetup.
SendConnSetup passes the reason argument to strlen & WriteToClient,
both of which already have const qualifiers on their args.
Thus added const to the reason variable in ProcEstablishConnection
and the reason argument to SendConnSetup.
Fixes gcc warnings:
dispatch.c: In function 'ProcEstablishConnection':
dispatch.c:3711:9: warning: assignment discards qualifiers from pointer target type
auth.c: In function 'CheckAuthorization':
auth.c:218:14: warning: assignment discards qualifiers from pointer target type
auth.c:220:20: warning: assignment discards qualifiers from pointer target type
connection.c: In function 'ClientAuthorized':
connection.c:683:3: warning: return discards qualifiers from pointer target type
mitauth.c: In function 'MitCheckCookie':
mitauth.c:88:13: warning: assignment discards qualifiers from pointer target type
xdmauth.c:259:14: warning: assignment discards qualifiers from pointer target type
xdmauth.c:270:14: warning: assignment discards qualifiers from pointer target type
xdmauth.c:277:11: warning: assignment discards qualifiers from pointer target type
xdmauth.c:293:15: warning: assignment discards qualifiers from pointer target type
xdmauth.c:313:14: warning: assignment discards qualifiers from pointer target type
xdmauth.c:322:11: warning: assignment discards qualifiers from pointer target type
rpcauth.c: In function 'SecureRPCCheck':
rpcauth.c:136:10: warning: assignment discards qualifiers from pointer target type
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
gcc was warning from storing string constants in a char *name field:
auth.c:64:1: warning: initialization discards qualifiers from pointer target type
auth.c:72:1: warning: initialization discards qualifiers from pointer target type
auth.c:81:1: warning: initialization discards qualifiers from pointer target type
Making the field const requires changing AuthorizationFromID to take
a const char ** pointer for the name argument which it sets to point
to the matching name entry.
Changing that argument requires changing its sole caller in the security
extension to pass the address of a const char * variable to it, which it
can do, since the only thing it does with the returned name is to pass
it back to the RemoveAuthorization function that already expects a const
char *name.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
LookupResourceName already returned a const char *, so just needed
to change the variable we're storing the list in to be a const char **
and then add const to the name argument to RegisterResourceName
(which just stores name in the array) and CreateNewResourceType
(which just passes name to RegisterResourceName).
Clears a bunch of gcc warnings of the form:
registry.c:319:5: warning: passing argument 2 of 'RegisterResourceName' discards qualifiers from pointer target type
registry.c:200:1: note: expected 'char *' but argument is of type 'const char *'
and from all the extensions:
damageext.c: In function 'DamageExtensionInit':
damageext.c:490:5: warning: passing argument 2 of 'CreateNewResourceType' discards qualifiers from pointer target type
../include/resource.h:159:26: note: expected 'char *' but argument is of type 'const char *'
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Avoids the dummy-event dance if we have an event type and need to get the
matching XI2 type.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This is needed for touch event processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
__BUG_WARN_MSG is a simple helper to enable call with and without varargs. I
couldn't find a way to otherwise do this without getting gcc warnings.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The current XI2 mask handling is handy for copying (fixed size arrays) but a
pain to deal with otherwise. Add a struct for XI2 masks and the required
accessors.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Not really needed at this point, but will be once touch support is added.
Since grabs are now expected to be allocated/freed with AllocGrab and
FreeGrab, CopyGrab must increase the refcount and duplicate the modifier
masks. Until the callers are switched to use FreeGrab, this introduces
memleaks.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Not needed since the GrabRec is a self-contained struct but will be needed
for the xi2 input mask rework.
FreeGrab already exists, make it available to other callers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
No effective functionality change, just cleanup to make this code slightly
more sane.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Makes things a little easier to read.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The example at the top of the file used a struct bar and a list of struct
foos. Use those two throughout instead of a different struct foo for the
examples and for the API documentation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Even with the documentation, the list.c tests are the best examples.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The existing list_add() prepends to the list, but in some cases we need the
list ordered in the way we append the elements.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Ensure ffs, strndup, strlcat, etc. aren't defined by our headers
if they're already defined in the system headers.
This does export the HAVE_FFS, HAVE_STRNDUP, etc. definitions to drivers,
but if you built the Xserver with a libc that had those, and then build
the drivers with a less capable libc, you're going to have problems anyway,
and this should solve some reported problems with conflicts between our
strndup definition and gcc magic for it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Replace multiple methods of checking for functions with AC_CHECK_FUNCS
Replace multiple methods of selecting fallback funcs with AC_REPLACE_FUNCS
Replace HAS_* and NEED_* #defines with autogenerated HAVE_*
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The code that used getisax to check for MMX support was moved to pixman
and removed from the X server by commit eb2d7fe02f.
The code that used HAVE_MKSTEMP was deleted by the Xprint removal in
commit 1c8bd318fb.
All alloca calls were removed by the patch series end in commit 5e363500c8,
and used custom X checks instead of the autoconf HAVE_ALLOCA anyway.
I can find no record of HAVE_GETUID, HAVE_GETEUID, HAVE_LINK, HAVE_MEMMOVE,
HAVE_MEMSET, HAVE_STRCHR, HAVE_STRRCHR, HAVE_GETOPT, HAVE_GETOPT_LONG,
HAVE_DOPRNT, or HAVE_VPRINTF ever being used, and the calls to those
functions are not wrapped in #ifdefs.
(Most of those are in our baseline requirements of C89 & Unix98 anyway.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The record extension needs the major and minor opcodes in the reply
hook, but the request buffer may have been freed by the time the hook
is invoked. Saving the request major and minor codes as the request is
executed avoids fetching from the defunct request buffer.
This patch also eliminates the public MinorOpcodeOfRequest function,
inlining it into Dispatch. Usages of that function have been replaced
with direct access to the new ClientRec field.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
There are plenty of cases that can only be triggered by a real bug in the
server and doing the ErrorF dance manually everywhere is a tad painful and
the error message is usually used only to find the spot in the file anyway.
Plus, reading BUG_WARN somewhere is a good indicator to the casual reader
that this isn't intended behaviour.
Note that this is intentionally different to the BUG_ON behaviour on the
kernel, we do not FatalError the server. It's just a warning + stacktrace.
If the bug is really fatal, call FatalError.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
And let it return a boolean value, that's all the callers need anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Same bug as inputproto-2.0.1-9-gb1149ab, if the XI2LASTEVENT was a multiple
of 8, the mask was one bit too short.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Cleans up around 120 warnings from this set
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Silencing more gcc -Wwrite-strings warnings
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Now that MakeAtom takes const char *, so can XIGetKnownProperty.
Clears 71 warnings from gcc -Wwrite-strings of the form:
devices.c:145:5: warning: passing argument 1 of 'XIGetKnownProperty' discards qualifiers from pointer target type
../include/exevents.h:128:23: note: expected 'char *' but argument is of type 'const char *'
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Linux test code fixed by: Keith Packard <keithp@keithp.com>
Since the check is for !(compilers that support __builtin_constant_p)
it needs to be !(gcc or new enough Sun cc), but was written as
!(gcc or too old Sun cc).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Any pad bytes in replies are written to the client from a zeroed
array. However, record extension tries to incorrectly access the pad
bytes from the end of reply data.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
This is mainly needed for consistency with GetPointerEvents and friend.
No-one seems to actually need this function from outside the usual DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No effective functional changes, prep work for future patches.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Instead of device and master (and just using master), drop the master
argument and let the callers pass in the device the event is to be sent for.
No effective functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
3304bbff9b added smooth scrolling support for
pointer events and for XIQueryDevice but didn't add the matching parts to
XIDeviceChangedEvents.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Use the same struct for both InputOption and XF86OptionRec so we don't need
to convert to and fro the two in the config backends.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Using this call simplifies callers that don't know if the mask bit is set.
Before:
if (valuator_mask_isset(mask, valnum))
value = valuator_mask_get_double(mask, valnum));
else
value = someothervalue;
Now:
if (!valuator_mask_fetch_double(mask, valnum, &value))
value = someothervalue;
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Co-authored-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
miPointerSetPosition traditionally took coordinates on a per-screen basis,
triggering a screen switch when these went out-of-bounds. For absolute
devices, this prevented screen crossing in the negative x/y direction.
This patch changes the event generation patch to handle screen coordinates
in a desktop range (i.e. all screens together). Screen switches are
triggered when these coordinates are not on the current screen.
This unifies the pointer behaviour of single ScreenRec multihead and
multiple ScreenRecs multihead in that the cursor by default moves about the
whole screen rather than be confined to one single screen. The
transformation matrix may then be used to actually confine the cursor to the
screen again.
Note: fill_pointer_events has to deal with several different coordinate
systems. Make sure you read the comment before trying to understand the code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For Zaphod mode screen crossing handling we need to know the size of all
screens together (i.e. the whole desktop size). Store that in the screenInfo to
have it readily available in events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
udev_enumerate_add_match_tag() and udev_monitor_filter_add_match_tag()
are mostly optimizations, hence simply skip these calls if they are not
available in the installed version of libudev.
This should fix the build on older versions of udev.
[airlied: fixes tinderbox failures on RHEL6]
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
For scroll wheel support, we used to send buttons 4/5 and 6/7 for
horizontal/vertical positive/negative scroll events. For touchpads, we
really want more fine-grained scroll values. GetPointerEvents now
accepts both old-school scroll button presses, and new-style scroll axis
events, while emitting both types of events to support both old and new
clients.
This works with the new XIScrollClass to mark axes as scrolling axes.
Drivers mark any valuators that send scroll events with SetScrollValuator.
(Currently missing: the XIDeviceChangeEvent being sent when a driver changes
a scroll axis at run-time. This can be added later.)
Note: the SCROLL_TYPE enums are intentionally different values to the XI2
proto values to avoid copy/overlapping range bugs.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes, prep work for future changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Return errors instead of silently ignoring them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
POINTER_EMULATED merely sets XIPointerEmulated in the generated
DeviceEvent.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
To be used for smooth scrolling with future driver APIs, replacing
Rel Vert Wheel and Rel Horiz Wheel axes, which have not been used in any
open driver to date.
Combined with double-granularity ValuatorMasks, these axes allow for
fine-grained scroll data to be sent to clients. Future commits allow
drivers to post these scroll axes to
QueuePointerEvents/GetPointerEvents, which take care of emulating legacy
scroll button events.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Change the last real user of a split integer/fractional co-ordinate
system, DeviceIntRec's last->{valuators,remainder} to just have one set
of doubles.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Change the DeviceEvent InternalEvent to use doubles for its valuators,
instead of data and data_frac.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Change RawDeviceEvent to use doubles for valuators internally, rather
than data(_raw) and data(_raw)_frac.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This widens almost all of the float-using code in ptrveloc.[ch] to
doubles, other than values coming from properties which are specified to
be floats by the property API.
Bumps input API to v14 as this changes the AccelScheme signature, as
used by xf86-input-synaptics.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Add API for valuator_mask that accepts and returns doubles, rather than
ints. No double API is provided for set_range at the moment.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Switch the ValuatorMask struct to using doubles instead of ints for the
actual values. Preserve the old int API, and (attempt to) round towards
zero for values we return.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a flags member which will be copied wholesale into the resultant
xXIDeviceEvent.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
1) The error attribute appeared in gcc-4.3
2) The return type of __builtin_constant_p is int
3) Sun Studio 12.0 and later builtin support for __builtin_constant_p
Found by Tinderbox.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
The more recent inclusions of this file haven't been checking for
HAVE_STDINT_H, so might as well make the older ones consistent.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
If the address of the swapped memory location is known at compile time,
we can check its alignment at no runtime cost and use lswapl instead.
text data bss dec hex filename
before: 1872820 52136 78040 2002996 1e9034 hw/xfree86/Xorg
after: 1864396 52136 78040 1994572 1e6f4c hw/xfree86/Xorg
bswap instructions: 131 -> 308 (used in lswapl)
rol instructions: 943 -> 1174 (used in lswaps)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Should be safe since cpswap isn't used on pointers.
text data bss dec hex filename
before: 1875588 52136 78040 2005764 1e9b04 hw/xfree86/Xorg
after: 1872820 52136 78040 2002996 1e9034 hw/xfree86/Xorg
bswap instructions: 5 -> 131 (used in lswapl)
rol instructions: 811 -> 943 (used in lswaps)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
The original macros are retained (instead of replacing them with inline
functions) because of implicit type promotion. That is, an int16 passed
to an inline function taking int32 would be implicitly promoted to int32
without a warning.
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
gcc generates better code with fabs() anyway.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Appears to be leftover from the Kerberos code deleted in 2007
(commit dfbe32b5b8).
Nothing left ever set clientState to ClientStateAuthenticating
Skipped over 1 to preserve existing enum numbering.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Use new per-screen privates API instead.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Appear to be leftovers from the XC-QUERY-SECURITY code deleted in 2007
(commit 375864cb74).
Nothing left ever set clientState to ClientStateCheckingSecurity.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
"configure --with-int10" is not a valid configuration, and the check for
sys/vm86.h and sys/io.h is not used. Delete it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
InputOptions is not switched to use struct list for a future patch to unify
it with the XF86OptionRec.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This is a set of macros to provide a struct list-alike interface for classic
linked lists such as the XF86OptionRec or the DeviceIntRec. The typical
format for these is to have a "struct foo *next" pointer in each struct foo
and walk through those. These macros provide a few basic functions to add to,
remove from and iterate through these lists.
While struct list is in some ways more flexible, switching legacy code to
use struct list is not alway viable. These macros at least reduce the amount
of open-coded lists.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
getevents.c already had that function, but XKB was manually initializing it,
causing bugs when the event structure was updated in one place but not the
other.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetMaster() currently requires an attached slave device as parameter,
resuling in many calls being IsFloating(dev) ? dev : GetMaster(...);
Add two new parameters so GetMaster can be called unconditionally to get the
right device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Add support for multi-seat-aware input device hotplugging. This
implements the multi-seat scheme explained here:
http://www.freedesktop.org/wiki/Software/systemd/multiseat
This introduces a new X server switch "-seat" which allows configuration
of the seat to enumerate hotplugging devices on. If specified the value
of this parameter will also be exported as root window property
Xorg_Seat.
To properly support input hotplugging devices need to be tagged in udev
according to the seat they are on. Untagged devices are assumed to be on
the default seat "seat0". If no "-seat" parameter is passed only devices
on "seat0" are used. This means that the new scheme is perfectly
compatible with existing setups which have no tagged input devices.
Note that the -seat switch takes a completely generic identifier, and
that it has no effect on non-Linux systems. In fact, on other OSes a
completely different identifier scheme for seats could be used but still
be exposed with the Xorg_Seat and -seat.
I tried to follow the coding style of the surrounding code blocks if
there was any one could follow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
LogVHdrMessageVerb allows a custom header to be inserted in a log message,
between the Log system's MessageType string, and a formatted variable
message body. The custom header can itself be a formatted variable string.
These functions can be used, for example, by driver abstraction layers to
format specific driver messages in a standard format, but do it in a way
that is efficient, obeys the log-layers verbosity settings, and is safe
to use in signal handlers (because they don't call malloc), even for
types besides X_NONE.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The composite extension spec says that window background painting
should be inhibited when the subwindow redirection mode is set to
manual.
This eliminates the ugly flashing effect when compiz unredirects a
fullscreen window.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Owen Taylor <otaylor@fishsoup.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of just closing the log when everything is done, put one more
message in stating that we're actually terminating. Users or scripts that
look at the Xorg.log will then know that a) the server has terminated
properly and b) why the server terminated (to some degree, given that most
real-world errors will be caused by AbortServer()).
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
RawEvents are supposed to be events coming from the driver. When warping the
pointer, this should not generate a raw event.
X.Org Bug 30068 <http://bugs.freedesktop.org/show_bug.cgi?id=30068>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add four new private XKB actions for debugging:
* PrGrbs: print active grabs to the log file
* Ungrab: ungrab all currently active grabs
* ClsGrb: kill clients with active grabs
* PrWins: dump the current window tree to the log file
To use these, you need to modify your XKB maps, e.g. the following to
have Ctrl+Alt+(F9-F12) mapped to the above:
- compat/xfree86:
interpret XF86LogGrabInfo {
action = Private(type=0x86, data="PrGrbs");
};
interpret XF86Ungrab {
action = Private(type=0x86, data="Ungrab");
}
interpret XF86ClearGrab {
action = Private(type=0x86, data="ClsGrb");
}
interpret XF86LogWindowTree {
action = Private(type=0x86, data="PrWins");
}
- symbols/pc:
key <FK09> { type="CTRL+ALT", [ Return, XF86LogGrabInfo ] };
key <FK10> { type="CTRL+ALT", [ Return, XF86Ungrab ] };
key <FK11> { type="CTRL+ALT", [ Return, XF86ClearGrab ] };
key <FK12> { type="CTRL+ALT", [ Return, XF86LogWindowTree ] };
At the moment, this only works if the grabbing client continues to call
AllowEvents, as the server does no event processing at all when a device
is frozen.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rewrite PrintWindowTree to make it actually tell you what you want to
know.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No functional changes, prep work for future changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Implements pointer barriers as specified by version 5 of the XFIXES
protocol. Barriers are axis-aligned, zero-width lines that block pointer
movement for relative input devices. Barriers may block motion in either
the positive or negative direction, or both.
v3:
- Fix off-by-one in version_requests array
- Port to non-glib test harness
- Fix review notes from Søren Sandmann Pedersen, add tests to match
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Providing an argument to return in a function with void return type
is not allowed by the C standard, and makes the Sun compilers unhappy.
(They actually flag it as an error, unless using a new enough version
to be able to downgrade it to a warning with "-features=extensions".)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
In some cases, knowing about the device model number and the device's vendor
is important to activate product-specific settings. Since this is
nonetheless driver-specific, only provide the property but don't do anything
with it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Since the server has little choice (or even knowledge) of the actual device
node used by the driver, this property is merely provided for
standardisation. It is up to the driver to set it to the appropriate value,
usually a device node in the form of /dev/input/event0 or similar.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
This struct was unused and has been effectively removed in
commit 633b81e8ba
Refs: xorg-server-1.10.0-133-g633b81e
Remove the remainder, with an ABI bump to 13.0.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Compare two version numbers in the major.minor form.
Switch the few users of manual version switching over to the new function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This isn't currently used by any of the callers but it will likely be in the
future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Previously, it only took DeviceEvents, but it would be much more useful
if it took InternalEvents. Any event that activates a grab must still
be a DeviceEvent, so put in a check to enforce this.
Change all callers to make the appropriate casts.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The macro is sufficient if called during a development cycle, but not
sufficient information when triggered by a user (e.g.
https://bugzilla.redhat.com/show_bug.cgi?id=688693).
Expand what this does to print the event content and a backtrace, so at
least we know where we're coming from. Only the first 32 bytes are printed
since if something goes wrong, the event we have is almost certainly an
xEvent or xError, both restricted to 32 bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Grabbing an SD device temporary floats the device but we must not release
the buttons. Introduced in
commit 9d23459415
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Fri Feb 25 11:08:19 2011 +1000
dix: release all buttons and keys before reattaching a device (#34182)
X.Org Bug 36146 <http://bugs.freedesktop.org/show_bug.cgi?id=36146>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Does what it says on the box: returns the deepest child window in a
given sprite's trace.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The interface to RegionInit():
RegionInit (RegionPtr pReg, BoxPtr rect, int size);
is very confusing because it doesn't take a list of boxes, it takes
*one* box, but if that box is NULL, it initializes an empty region
with 'size' rectangles preallocated.
Most callers of this function were correctly passing either NULL or
just one box, but there were three confused cases, where the code
seems to expect a region to be created from a list of boxes.
This patch adds a new function RegionInitBoxes() and fixes those
instances to call that instead.
And yes, the pixman function to initialize a region from a list of
boxes is called init_rects() because pixman is also awesome.
V2: Make RegionInitBoxes() return a Bool indicating whether the call
succeeded, and fix the callers to check this return value.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Søren Sandmann <ssp@redhat.com>
Don't confuse users with a return type of short, that's even less indicative
that it returns 0/non-0 than "int".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
commit 678f5396c9 only fixed the
initialization, not the copy. After a slave device change, the valuator
were out of alignment again.
X.Org Bug 36119 <http://bugs.freedesktop.org/show_bug.cgi?id=36119>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
each DDX has its own copy, I've taken the darwin one,
though I'm not sure why it needs the pOldClip piece that nobody
else has and the commit msg is like an "Updates from magic land"
type message.
This removes the main uses of pWin->winSize from the DDXen.
v2: drop old clip like ajax suggests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes the struct, but keeps InitAbsoluteClassDeviceStruct as
a no-op and preserves related struct layout.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
AX_TLS detects when toolchains support __thread or __declspec(thread),
but existing code assumed __thread.
This also adds a check to configure.ac to error out if TLS is requested
but unsupported.
Found-by: Tinderbox
http://tinderbox.x.org/builds/2011-03-22-0007
Regression-from: 82b1eaa6ca
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Tom Fogal <tfogal@alumni.unh.edu>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This reverts commit 1564c82417.
The drivers used the top bits of the usage_hint to store driver
private flags (intel, radeon, nouveau).
With EXA we need to get at this data so if we migrate the pixmap we
can create the correct type of pixmap in the driver, however this
commit truncates the usage_hint into 8-bit class and loses all the
good stuff.
Signed-off-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
long is needlessly long on LP64.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
size needn't be a long. No change on ILP32 but, combined with the
previous change, 56 -> 40 bytes on LP64.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
unsigned long is needlessly large on LP64. Use uint32_t instead.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The class field was unused for pixmaps, and we don't have enough classes
to justify a whole uint32 anyway.
Reviewed-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
CARD32 is being returned by GetTimeInMilis(), so use it consistently.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This intends to clean up the predictable accel struct
from purely scheme-related things like input properties,
as they would be useless in other use cases such
as wheel acceleration.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Nobody can have been using this, it's never called from extension init.
XI2 device properties should now be a functional replacement.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For Pointer Barriers, the movement mode is important and must be passed
through.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Use _LP64 (verified on gcc and sun compilers) instead of _XSERVER64 in
internal header usage, and always define _XSERVER64 for modules if _LP64
is defined. Prevents differing xorg-server.h between 32 and 64 bit
packages.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The removal of the double-use will cause some suble bugs as some conditions
to check for the dev->u.master case were broken and also evaluated as true
if lastSlave was set (instead of master).
Also breaks the input ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
In some cases, we don't know/care whether we want the master pointer or keyboard
for a device. Add a new type MASTER_ATTACHED to return the master this
device is attached to.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
This makes it possible to init a scheme in one init call, so we
get rid of the tightly coupled two-phase init used before.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some event types (notably Expose and GraphicsExpose) require multiple
events, a la XI 1.x. Bring the EventToCore API in line with EventToXI's
and allow it to generate multiple events.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rename the return mask values for EventIsDeliverable:
* CORE_MASK -> EVENT_CORE_MASK
* XI_MASK -> EVENT_XI1_MASK
* XI2_MASK -> EVENT_XI2_MASK
* DONT_PROPAGATE_MASK -> EVENT_DONT_PROPAGATE_MASK
And don't undef them in dix/events.c, since they're supposed to be
global.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The two functions have identical semantics, including safely returning
NULL when NULL is passed in (which POSIX strdup does not guarantee).
Some callers could probably be adjusted to call libc strdup directly,
when we know the input is non-NULL.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We don't modify "value", make it official.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan-de-oliveira@nokia.com>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Expecting the caller to free the mask requires us to keep it in a single
memory block (which may be an issue lateron), aside from leaving the API
asymetrical. Provide valuator_mask_free() to free the memory and reset the
mask pointer to NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This just reserves the slot in the ABI. Confining cursors to CRTCs will
come soon.
v2: Just reserve the slot.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Change CheckPassiveGrabsOnWindow to return the GrabPtr it used (or NULL
if none) rather than a boolean, and export it. Also add an additional
boolean 'activate' parameter; use TRUE for existing behaviour, or FALSE
to only find the grab and then return it.
This will be used in forthcoming touch patches to find the grabs, rather
than open-coding same.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make it non-static, add to headers.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
XYToWindow calculates the position of the cursor and updates the sprite
trace, but does nothing else with the device. Pass a SpritePtr instead
so we can update an alternate focus instead of hardcoding the device's
sprite. Also make this function non-static, so we can use it elsewhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Since FixUpEventFromWindow only uses the sprite trace to determine the
window stack, pass in a sprite instead of hardcoding the device sprite,
so we can deliver to windows other than the one currently containing the
sprite.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Change its definition to be more in line with other structs, so we can
use it from input.h.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Rename compUpdateWindow to compPaintWindowToParent and split the child
walk to compPaintChildrenToWindow. Calling compPaintChildrenToWindow
allows an arbitrary subtree to be updated, instead of having to update
all the windows. This will be used to make sure all the descendants are
copied to the parent when the parent window contents need to be accessed
in IncludeInferios sub-window mode.
WindowRec has a new member 'damagedDescendants' that is used to keep
track of which subtrees need updating. When a window is damaged,
'damagedDescendants' will be set for all the ancestors, and when a
subtree is updated, the tree walk can be stopped early if no damaged
descendants are present.
CompScreenRec no longer needs the 'damaged' member since the root
window's 'damagedDescendants' provides the same information.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pass the subWindowMode from the GC/source Picture to SourceValidate.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When we send BadValue back to the client for having invalid mask bits,
at least tell them what the (first) invalid bit was.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Will be used outside dix/events.c in proceeding XI 2.1 MT changes.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The definition of rClient was duplicated across three source files, so
move it to resource.h.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Input drivers may use valuator masks for internal state. Having all the
valuator_mask_* functions available will help.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Bump ABI_XINPUT_VERSION minor.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
An interface is provided for figuring out the PID and process name of
a client. Make some existing functionality from SELinux and IA
extensions available for general use.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Provides a portable implementation of this common allocating sprintf()
API found in many, but not yet all, of the platforms we support.
If the platform provides vasprintf() we simply wrap it, otherwise we
implement it - either way callers can use it regardless of platform.
Since not all platforms guarantee to NULL out the return pointer on
failure, we don't either, and require callers to check the return
value for -1.
The old Xprintf() API is deprecated, but left for compatibility for now.
The new API is added in a new header so that it can be used in parts of
the server such as hw/xfree86/parser that don't include all the server
headers.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
The following happens otherwise (with -Wall -Werror):
| In file included from /usr/include/X11/Xfuncs.h:47,
| from ../../include/misc.h:112,
| from ../../include/screenint.h:52,
| from ../../include/scrnintstr.h:52,
| from ../../dix/cursor.c:58:
| /usr/include/string.h:534: error: conflicting types for ‘xstrcasecmp’
| ../../include/os.h:488: note: previous declaration of ‘xstrcasecmp’ was here
| /usr/include/string.h:538: error: conflicting types for ‘xstrncasecmp’
| ../../include/os.h:493: note: previous declaration of ‘xstrncasecmp’ was here
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
This bumps the supported RandR protocol version and adds the dispatch
hooks needed to call the new functions
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Add the new protocol handlers for XSync 3.1 to the
dispatch tables and report support for Sync protocol
version 3.1.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
-Add fence sync objects
-Add fence sync devPrivates
-Add a X sync module screen private
-Add wrappable functions to create and destroy
fence sync objects
-Give fence sync objects wrappable functions to
trigger, test, and reset their 'triggered' value.
-Give fence sync objects wrappable functions to
notify driver when adding/removing triggers to/
from the sync object.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Most extensions have a version defined
in the protocol headers, and also in the
server's protocol-versions.h. The latter
defines which version the server advertises
support for. Sync wasn't included in
protocol-versions.h, and was advertising
support for whatever was in the protocol
headers the server was built against.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Doesn't seem to be any reason to just not pass the error string
as another argument directly to LogVWrite()
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
According to Xserver-spec, they were part of the now-deleted DBE "Idioms"
code. The last callers of them were removed in commits fe616f9230 &
3d64290547.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Simply returning the mask bit breaks checks like
BitIsOn(mask, 0) != BitIsOn(mask, 1);
as used in 048e93593e.
The naming of this macro suggests that it should return boolean values
anyway. This patch also adds a few simple tests for these macros to make
sure they don't accidentally break in the future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pat Kane <pekane52@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
It lets the driver notify the server whether it can draw a background when
'-background none' option is used by the system platform. Use cases for that
could be video drivers performing mode-setting in kernel time, before X is up,
so a seamless transition would happen until X clients start to show up.
If the driver can copy the framebuffer cleanly then it can set the flag
(canDoBGNoneRoot), otherwise the server will fallback to the normal behaviour.
The system must explicit indicates willingness of doing so through
'-background none'. We could do this option as default; in such case,
malicious users would be able to steal the framebuffer with a bit of tricks.
For instance, I can see the content of my nVidia Quadro FX 580 framebuffer
old X session modifying a bit nv driver:
xf86DPMSInit(pScreen, xf86DPMSSet, 0);
- /* Clear the screen */
- if(pNv->xaa) {
- /* Use the acceleration engine */
- pNv->xaa->SetupForSolidFill(pScrn, 0, GXcopy, ~0);
- pNv->xaa->SubsequentSolidFillRect(pScrn,
- 0, 0, pScrn->displayWidth, pNv->offscreenHeight);
- G80DmaKickoff(pNv);
- } else {
- /* Use a slow software clear path */
- memset(pNv->mem, 0, pitch * pNv->offscreenHeight);
- }
+ pScreen->canDoBGNoneRoot = TRUE;
The commit is originally based on discussions happened on xorg-devel:
http://lists.freedesktop.org/archives/xorg-devel/2010-June/009755.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Acked-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Protocol doesn't mention about screen saver with logo being required and
people are already using more intelligent ways to draw screen saver themes. So
consider -logo as deprecated option, deleting its code.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We have per-axis mode now. For those bits that still need it (XI 1.x),
assume that the first axis holds the device's mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Previously the OutOfProximity bit in the valuator mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Returns the mode of the specified valuator.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
With the switch to masks internally, this isn't needed anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Function to count the number of bits set in the given array.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Without this patch, any negative valuator value is wrong when returned
from XQueryDeviceState(). This is a regression from at least xserver
1.4.
Valuator data is set in dix/getevents.c:set_valuators() by copying
signed int values into an unsigned int field
DeviceEvent.valuators.data.
That data is converted into a double with an implicit cast by
assignment to axisVal[i] in Xi/exevents.c:UpdateDeviceState().
That double is converted back to a signed int in
queryst.c:ProcXQueryDeviceState(). If the original value in
set_valuators() is negative, the double value will be > 2^31 and the
conversion back to a signed int is undefined. (Although I
consistently see the value -2^31.)
Fix this by changing the definition of DeviceEvent.valuators.data from
uint32_t to int32_t.
Signed-off-by: Joe Shaw <joeshaw@litl.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Move the basic sanity checking to an inline wrapper, which avoids the
function call overhead if the callback list is empty. On an XACEful
server on a 2.4GHz Core 2 Duo:
1 2 Operation
-------- ----------------- -----------------
20000000.0 25100000.0 ( 1.25) X protocol NoOperation
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Drop DRAWABLE_BUFFER and related checks, mbuf was the only thing that
used them and it was killed in 0ba82562.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
This just simplifies ComputeFreezes, eliminating some duplicated code
and a goto.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add MSB/LSB related definitions into include/servermd.h
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This replaces dixCreatePrivateKey and the only uses, which were in
midispcur.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The server and drivers sometimes use GetScratchGC, but never
CreateScratchGC.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This is very similar to the RunFromSmartParent (implicit) option, except
we do not send the signal to our parent process, but our own process
instead, and that signal is SIGSTOP, not SIGUSR1.
Upstart or a similar equivalent program will detect this, realize that
we are ready to accept clients now, send us SIGCONT and move our job
status from SPAWNED to RUNNING.
Signed-off-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This hook wasn't used by any DDX. Device addition and removal is handled by
the config backend, so we don't need to do anything special that during the
ListInputDevices request processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In theory, these hooks were to be used for DDX-specific device enablement.
None of the DDXs however did anything here. Now we call DEVICE_INIT on all
devices when they are added, so the xfree86 DDX as the only one with real
code didn't do anything here.
kdrive checked for device validity but that's already handled in
ProcXOpenDevice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
commit 1432785839
xkb: release XTEST pointer buttons on physical releases. (#28808)
revealed a bug with the XTEST/PointerKeys interaction.
Events resulting from PointerKeys are injected into the event processing
stream, not appended to the event queue. The events generated for the fake
button press include a DeviceChangedEvent (DCE), a raw button event and the
button event itself. The DCE causes the master to switch classes to the
attached XTEST pointer device.
Once the fake button is processed, normal event processing continues with
events in the EQ. The master still contains the XTEST classes, causing some
events to be dropped if e.g. the number of valuators of the event in the
queue exceeds the XTEST device's number of valuators.
Example: the EQ contains the following events, processed one-by-one, left to
right.
[DCE (dev)][Btn down][Btn up][Motion][Motion][...]
^ XkbFakeDeviceButton injects [DCE (XTEST)][Btn up]
Thus the event sequence processed looks like this:
[DCE (dev)][Btn down][Btn up][DCE (XTEST)][Btn up][Motion][Motion][...]
The first DCE causes the master to switch to the device. The button up event
injects a DCE to the XTEST device, causing the following Motion events to be
processed with the master still being on XTEST classes.
This patch post-fixes the injected event sequence with a DCE to restore the
classes of the original slave device, resulting in an event sequence like
this:
[DCE (dev)][Btn down][Btn up][DCE (XTEST)][Btn up][DCE (dev)][Motion][Motion]
Note that this is a simplified description. The event sequence injected by
the PointerKeys code is injected for the master device only and the matching
slave device that caused the injection has already finished processing on
the slave. Furthermore, the injection happens as part of the the XKB layer,
before the unwrapping of the processInputProc takes us into the DIX where
the DCE is actually handled.
Bug reproducible with a device that reports more than 2 valuators. Simply
cause button releases on the device and wait for a "too many valuators"
warning message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
When doing Xinerama, we'll dispatch font ops across all backend screens.
If using a font server (such that some operations can sleep), we'll put
the client to sleep once for each screen, but only wake up once, because
we're trying to keep track of the sleep count in _each_ screen's
closure.
Instead, just ask the core whether the client is already asleep.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Same as the matching key functions. Buttons, like keys, can have two states
for down/up - one posted, one processed. Posted is set during event
generation (usually in the signal handler). Processed is set during event
processing when the event queue is emptied and events are being delivered to
the client.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Support for the blend mode operators was added in
0ce42adbf4
and the requirement was bumped but when things were split off into
include/protocol-versions.h it defined it to 10. render uses
the lower of the client and server advertised versions so it's not
using the new blend mode operators.
Signed-off-by: Robert Hooker <sarvatt@ubuntu.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
When this privates.h is included in C++ builds, the compiler
complains about implicitly casting void* to void**. This small
patch fixes that up.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If a button release event is posted for the MD pointer, post a release event
through the matching XTEST device. This way, a client who posts a button
press through the XTEST extension cannot inadvertedly lock the button.
This behaviour is required for historical reasons, until server 1.7 the core
pointer would release a button press on physical events, regardless of the
XTEST state. Clients seem to rely on this behaviour, causing seemingly stuck
grabs.
The merged behaviour is kept for multiple keyboard PointerKey events, if two
physical keyboards hold the button down as a result of PointerKey actions,
the button is not released until the last keyboard releases the button.
X.Org Bug 28808 <http://bugs.freedesktop.org/show_bug.cgi?id=28808>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Problem:
lockedPtrButtons keeps the state of the buttons locked by a PointerKeys button
press. Unconditionally clearing the bits may cause stuck buttons in this
sequence of events:
1. type Shift + NumLock to enable PointerKeys
2. type 0/Ins on keypad to emulate Button 1 press
→ button1 press event to client
3. press and release button 1 on physical mouse
→ button1 release event to client
Button 1 on the MD is now stuck and cannot be released.
Cause:
XKB PointerKeys button events are posted through the XTEST pointer device.
Once a press is generated, the XTEST device's button is down. The DIX merges
the button state of all attached SDs, hence the MD will have a button down
while the XTEST device has a button down.
PointerKey button events are only generated on the master device to avoid
duplicate events (see XkbFakeDeviceButton()). If the MD has the
lockedPtrButtons bit cleared by a release event on a physical device, no
such event is generated when a keyboard device triggers the PointerKey
ButtonRelease trigger. Since the event - if generated - is posted through
the XTEST pointer device, lack of a generated ButtonRelease event on the
XTEST pointer device means the button is never released, resulting in the
stuck button observed above.
Solution:
This patch merges the MD's lockedPtrButtons with the one of all attached
slave devices on release events. Thus, as long as one attached keyboard has
a lockedPtrButtons bit set, this bit is kept in the MD. Once a PointerKey
button is released on all keyboards, the matching release event is emulated
from the MD through the XTEST pointer device, thus also releasing the button
in the DIX.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Problem:
lockedPtrButtons keeps the state of the buttons locked by a PointerKeys button
press. Unconditionally clearing the bits may cause stuck buttons in this
sequence of events:
1. type Shift + NumLock to enable PointerKeys
2. type 0/Ins on keypad to emulate Button 1 press
→ button1 press event to client
3. press and release button 1 on physical mouse
→ button1 release event to client
Button 1 on the MD is now stuck and cannot be released.
Cause:
XKB PointerKeys button events are posted through the XTEST pointer device.
Once a press is generated, the XTEST device's button is down. The DIX merges
the button state of all attached SDs, hence the MD will have a button down
while the XTEST device has a button down.
PointerKey button events are only generated on the master device to avoid
duplicate events (see XkbFakeDeviceButton()). If the MD has the
lockedPtrButtons bit cleared by a release event on a physical device, no
such event is generated when a keyboard device triggers the PointerKey
ButtonRelease trigger. Since the event - if generated - is posted through
the XTEST pointer device, lack of a generated ButtonRelease event on the
XTEST pointer device means the button is never released, resulting in the
stuck button observed above.
Solution:
This patch merges the MD's lockedPtrButtons with the one of all attached
slave devices on release events. Thus, as long as one attached keyboard has
a lockedPtrButtons bit set, this bit is kept in the MD. Once a PointerKey
button is released on all keyboards, the matching release event is emulated
from the MD through the XTEST pointer device, thus also releasing the button
in the DIX.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When ResetCurrentRequest is called, or IgnoreClient is called when a
client has input pending, IgnoredClientsWithInput will be set. However,
a subsequent IgnoreClient request will clear the client fd from that fd
set, potentially causing the client to hang.
So add an Ignore/Attend count, and only apply the ignore logic on the
first ignore and the attend logic on the last attend. This is
consistent with the comments for these functions; callers must pair
them.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=27035.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
X server doesn't need to understand fpe internals, so use
register_fpe_functions from libXfont.
It's required to get new version of libXfont, therefore adjust it to be passed
to autoconf.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Can't use next as a macro argument since we're accessing the .next field
of struct list.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:
MatchUSBID "046d:*"
The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:
MatchPnPID "WACf*"
A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Allow InputClass sections to match against the running operating system
to narrow the application of rules. An example where this could be used
is to specify that the default input driver on Linux is evdev while it's
mouse/kbd everywhere else.
The operating system name is the same as `uname -s`, and matching is
case-insensitive.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The internals of XTest are used by Xi and Xkb, and both Xi and Xkb are
always required, so it makes little sense to have XTest place data in
a devPrivate, especially a devPrivate which is only available when the
XTest extension is enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make sure all of the private keys used by the test code are
initialized before being used.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Robert Hooker <sarvatt@ubuntu.com>
Keys need to persist through server reset so that the private system
can be cleaned up in dixResetPrivates. In particular, this means that
keys cannot live in objects freed at reset time. This API provides
suitable object lifetime by having the privates code free the key in
the reset path.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Each key now declares which object type it belongs to, this permits
keys for different types to share the same offset within the allocated
privates. As a special case for XSELinux, a key may be allocated as
PRIVATE_XSELINUX which will allow it to continue to be used across the
relevant object types.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
For predefined resource types, the offset of the devPrivates field was
already kept in a constant table. The only non-predefined type needing
this treatment was dbeDrawableResType, which is just a magic alias for
RT_PIXMAP.
This patch special-cases looking up RC_DRAWABLE offsets and uses the
table directly for everything else.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This makes the region code changes source compatible with existing
code, although none of them are used within the server source itself.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This makes all of the previous macros into inline functions and also
turns all of the direct calls to pixman region code into inline
functions as well.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This prepares the file to be moved from mi to dix. This patch
was done mechanically with the included scripts 'fix-miregion' run over
the entire X server and 'fix-miregion-private' run over
include/regionstr.h and mi/miregion.c.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since reallocating the backing pixmap can fail, we need to try and do
it before any other side effects of reconfiguring the window happen.
This changes the ConfigNotify hook to return status, and moves the
composite window reconfiguration wrappers to ConfigNotify. They all
basically did the same thing, so we can drop the MoveWindow,
ResizeWindow, ChangeBorderWidth wrappers, and allow ConfigNotify to do
all the work. If reallocation fails we fail before we send any
confiureNotify events, or enter the area we can't recover from.
The only place we now enforce 32k limits are in EXA/UXA/fb, so drivers
that don't use this should probably deal with it in their pixmap
allocate if they don't already.
This also breaks ABI, so we need an alternate fix for older servers,
working on the X server makes me realise why I'm a kernel hacker.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Most references to the savedScreenInfo array already had the
corresponding screen pointer handy, which meant they usually looked like
"savedScreenInfo[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Some drivers use DRI protocol but implement their own kernel rendering
manager. For these drivers, libdrm becomes useless. --disable-libdrm
configure parameter can be used to disable libdrm support in dri2.
To provide ABI/API compatibility for libdrm based drivers, libdrm call
is wrapped in ifdef.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Propagate the shape kind all the way to SetShape to avoid performing non-input
operations such as revalidating the tree and generating exposures when only
changing a window's input shape.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Acked-by: Aaron Plattner<aplattner@nvidia.com>
Reviewed-by: Daniel Stone<daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
For absolute input devices (E.G. touchscreens) in multi-head setups,
we need a way to bind the device to an randr output. This adds the
infrastructure to the server to allow us to do so.
positionSprite() scales input coordinates to the dimensions of the shared
(total) screen frame buffer, so to restrict motion to an output we need to
scale/rotate/translate device coordinates to a subset of the frame buffer
before passing them on to positionSprite.
This is done here using a 3x3 transformation matrix, which is applied to
the device coordinates using homogeneous coordinates, E.G.:
[ c0 c1 c2 ] [ x ]
[ c3 c4 c5 ] * [ y ]
[ c6 c7 c8 ] [ 1 ]
Notice: As input devices have varying input ranges, the coordinates are
first scaled to the [0..1] range for generality, and afterwards scaled
back up.
E.G. for a dual head setup (using same resolution) next to each other, you
would want to scale the X coordinates of the touchscreen connected to the
both heads by 50%, and translate (offset) the coordinates of the rightmost
head by 50%, or in matrix form:
left: right:
[ 0.5 0 0 ] [ 0.5 0 0.5 ]
[ 0 1 0 ] [ 0 1 0 ]
[ 0 0 1 ] [ 0 0 0 ]
Which can be done using xinput:
xinput set-prop <left> --type=float "Coordinate Transformation Matrix" \
0.5 0 0 0 1 0 0 0 1
xinput set-prop <right> --type=float "Coordinate Transformation Matrix" \
0.5 0 0.5 0 1 0 0 0 1
Likewise more complication setups involving more heads, rotation or
different resolution can be handled.
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301.
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No special memory handling is used to give drivers the maximum flexibility
with the data. Drivers should be able to call realloc on the product string
if needed and perform similar operations.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
For AtomError, this should fix a clang warning; in the other cases it's
just good documentation.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This eliminates a poorly-named, poorly-documented field from the
ScreenRec, using a previously-unused flag bit in each GC instead.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The structure containing the state of animated cursor was amended within
SpriteInfoRec, removing all previously privates logic to keep such state.
API change: It was removed MAXDEVICES dependency \o/
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
XSELinux was the only consumer of these interfaces and it no longer
needs them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Use the values from xproto rather than duplicating the effort
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
The call in CreateGC is particularly questionable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Previously the callers were only setting errorValue on Success, when
it's ignored, and leaving it alone on failure, when it's sent to the
client.
Since SetFontPath takes the ClientPtr, let it set client->errorValue
instead of letting the callers continue to get it wrong.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
C89 guarantees alignment of pointers returned from malloc/calloc/realloc, so
stop fiddling with alignment manually and just pass the arguments to library
functions.
Also convert silent error when negative size is passed into function into
warning in log file.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With Xinerama enabled, event coordinates are relative to Screen 0, so
they can be negative. The new DeviceEvent's coordinates are of type
uint16_t, making screens above and to the left of Screen 0 unusable.
X.Org Bug 24986 <https://bugs.freedesktop.org/show_bug.cgi?id=24986>
Signed-off-by: Chris Humbert <freedesktop@mahadri.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In the process, fixes a memory leak in CloseDevice, and an unchecked
memory allocation in InitializePredictableAccelerationProperties.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Needed as the privates stuff uses the callbacks before they would have
been defined in dix.h
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
The functions exported by the devPrivates code were poorly documented. I tried
to spruce it up a little.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Bizarre. This seems to never be used before. I left the field in ScreenInfo,
with another name. So, stop looking at it.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This should be removed together with 49b93df8.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
The rationale behind is because no sane application will use this when we have
modern APIs such DRI2. Besides, as a fact, xfree86 server has already
deprecated this extension in 1998:
http://www.xfree86.org/3.3.6/isc7.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
The name XkbDDXFakeDeviceButton and XkbDDXFakeDeviceMotion is somewhat
misleading, there's no DDX involved in the game at all anymore.
This removes XkbFakeDeviceMotion and XkbFakeDeviceButton from the API where
it arguably shouldn't have been in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Section 4.6.1 of the XKB spec says that "the initial event always moves the
cursor the distance specified in the action [...]", so skip the
POINTER_ACCELERATE flag for GPE, it would cause double-acceleration.
Potential regression - GPE expects the coordinates to be either relative or
both. XKB in theory allows for x to be relative and y to be absolute (or
vice versa). Let's pretend that scenario has no users.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Those functions are used by TigerVNC libvnc.so module which doesn't
use standard XInput infrastructure but uses same functions like,
for example, XTest devices.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Update our supported DRI2 protocol version as each driver does
DRI2ScreenInit, since depending on available kernel features, each DDX
may support different callbacks and therefore protocol.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Allow the default log location to be configurable (e.g. /var/log),
and use separate logs for each display instance (e.g. XWin.0.log).
Make the type of g_pszLogFile const char*, per os/log.c:LogInit().
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Borrowed from i830.h, except for list_for_each_entry().
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Executed from the ConfigureWindow request, right before sending
ConfigureNotify to the clients.
This commit breaks the ScreenRec ABI.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reintroduce a check which used to be there in the old
ProcessKeyboardEvent/ProcessPointerEvent codepath, which avoids us
recording events subject to a grab twice: once when it's first processed
in EnqueueEvent, and then again when it's thawed and being replayed.
This required a tiny amount of code motion to expose syncEvents.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Also remove HAVE_NETLINK_AVC_ACQUIRE_FD tests, because we now
require a version of libselinux that has it.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
RECORD was disabled during the switch to internal events. This patch
modifies the record callback to work with internal events instead of
xEvents. The InternalEvents are converted to core/Xi events as needed.
Since record is a loadable extension, the EventTo* calls must be externed.
Signed-off-by: Chris Dekter <cdekter@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The only DDX currently using hotplugging is the xfree86 one and it looks
like it'll stay that way for a bit. Move the initialization to the DDX,
since Xephyr, Xnest, and friends don't need HAL or udev notifications.
Add CloseInput (counterpart to InitInput) to be able to clean up the config
initialization from the DDX as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tags may be a list of comma-separated strings that match against a MatchTag
InputClass section. If any of the tags specified for a device match against
the MatchTag of the section, this match is evaluated true and passed on to
the next match condition.
Tags are specified as "input.tags" (hal) or "ID_INPUT.tags" (udev), the
value of the tags is case-sensitive and require an exact match (not a
substring match).
i.e. "quirk" will not match "QUIRK", "need_quirk" or "quirk_needed".
Example configuration:
udev:
ENV{ID_INPUT.tags}="foo,bar"
hal:
<merge key="input.tags" type="string">foo,bar</merge>
xorg.conf:
Section "InputClass"
Identifier "foobar quirks"
MatchTag "foo|foobar"
Option "Foobar" "on"
EndSection
Where the xorg.conf section matches against any device with the tag "foo"
or tag "foobar" set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Move tokenize out of the parser, make it a dix util function instead.
Splitting a string into multiple substrings is useful by other places, so
let's use it across the line. Future users include config/hal, config/udev
and of course the parser.
Example usage:
char **substrings = xstrtokenize(my_string, "\n");
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Thoses definitions have been included in the kernel but the X server is not updated accordingly.
Without these definitions, the multitouch axes are not correctly labelled.
Signed-off-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Look for system.Xwinrc in SYSCONFDIR/X11 (usually /etc/X11)
Rename sample system.Xwinrc file not to have a X11R6 path in it's name
Add makefile install rule for system.XWinrc
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Use the configured vendor web address in the About dialog
Update resources file: rework About dialog, use 'MS Shell Dlg 2'
logical font for all dialogs, add ellipsis to exit option in tray
menu as it (may) trigger another dialog.
Get short vendor name from xwin-config.h, like other configuration
data presented in the About dialog box, rather than creating the
PROJECT_NAME define
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The default behavior of the server is to start with an invisible root cursor.
Be such cursor invisible or inexistent (null), in the end it doesn't matter -
for the user. The content on screen will be the same. Besides, there's no
difference, in terms of performance, whether such cursor is invisible or
simply null. The paths that both take inside the server are roughly the same.
Therefore create a null root cursor becomes irrelevant.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
XKB really XKBdoes not XKBneed its own XKBdefines for XKBeverything.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since it's typedef'd to XkbConvertCase anyway and the headers are now split
from the client headers, simply get rid of it altogether.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Bonus point - it's easier to understand what's actually being done with the
memory.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Keith Packard <keithp@keithp.com>
Please no extension-specific macros for memory allocation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Support the new DRI2 2.2 protocol requests: DRI2SwapBuffers, DRI2GetMSC,
DRI2WaitMSC, DRI2WaitSBC and DRI2SwapInterval.
These requests allow the server to support the SGI_video_sync,
SGI_swap_interval, and OML_sync_control GLX extensions if DDX support is
present. The new DDX APIs are documented in dri2.h.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Main problem is that EventType enumeration members can be different in
module and in server, which obviously causes problems.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add --without-kdrive-{kbd,mouse,evdev} configure options disabling
Linux keyboard driver, Linux mouse drivers (ps2, bus,ms),
and Linux evdev driver.
Build all drivers by default as before.
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This profile is inspired by the accel code removed from the wacom driver.
It ascends from zero to acceleration, maxing out at threshold. This means you
can control the slope using threshold, which wasn't possible in wacom.
For sanity's sake, threshold should grow with acceleration.
Works best with adaptive deceleration, since otherwise it only generates
acceleration above 1, causing seldom pixel skips.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.
The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:
* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen
See the INPUTCLASS section in xorg.conf(5) for more details.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Currently there is a single file, xorg.conf, for configuring the server.
This works fine most of the time, but it becomes a problem when packages
or system services need to adjust the configuration. Instead, allow
multiple configuration files to live in a directory. Typically this will
be /etc/X11/xorg.conf.d.
Files with a suffix of .conf will be read and added to the server
configuration after xorg.conf. The server won't fall back to using the
auto configuration unless there is no config file and there are no files
in the config directory.
Right now this uses a simpler search template than the config file
search path by not using the command line or environment variable
parameters. The matching code was refactored a bit to make this more
coherent. Any DDX wanting to read the config files will need to call
xf86initConfigFiles before opening/reading them. This is to allow
xf86openConfigFile without xf86openConfigDirFiles and vice-versa.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Default remains the same - on for most OS'es on i386 (except Solaris),
off for everyone else. Can be manually toggled via --enable-pc98 or
--disable-pc98.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
InitValuatorClassDeviceStruct always initializes with the default profile.
The default profile allocs data and adds a few properties which become
obsolete if the profile is changed lateron by the driver.
The property handlers are stored in the device's devPrivates and cleaned up.
Ideally, the property handler ID's could be stored somewhere more obvious,
but that seems to require breaking the ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Simon Thum <simon.thum@gmx.de>
Xvesa was gone in commit 6d21fbf0 and this should be there as well.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
libSystem on darwin can handle SHA1 computation without needing to pull in
OpenSSL. See CC_crypto(3)
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
On Sun, Nov 01, 2009 at 02:54:13PM -0800, Keith Packard wrote:
> Excerpts from Matthieu Herrb's message of Sun Nov 01 09:34:35 -0800 2009:
>
> > +AC_CHECK_FUNCS([SHA1Init], [HAVE_LIBC_SHA1=yes])
>
> I'd suggest AC_CHECK_FUNC instead; as far as I can tell, AC_CHECK_FUNCS
> will also define HAVE_SHA1INIT. Also, can you use HAVE_LIBC_SHA1
> consistently rather than having two separate names (HAVE_LIBC_SHA1 and
> HAVE_SHA1_IN_LIBC)? Yes, I know one is a preprocessor symbol and the
> other is a cpp shell variable, but I think that will work anyway.
>
New version taking you comments into account.
From: Matthieu Herrb <matthieu.herrb@laas.fr>
Date: Sun, 1 Nov 2009 18:19:27 +0100
Subject: [PATCH] Add a probe for SHA1 functions in libc in *BSD.
The interface is the same as the one in libmd.
Signed-off-by: Keith Packard <keithp@keithp.com>
There are small systems which don't need OpenSSL or gcrypt.
Add libsha1 (http://github.com/dottedmag/libsha1) as an alternative
small SHA1 implementation.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This function was moved verbatim into libXfont-1.4, and it is not used
by the server or any drivers. Exporting it in both places leads to
multiple definition linking errors on Cygwin, where we need to use a
static libXfont due to poor weak-symbol handling.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
XWin uses ddxBeforeReset, which is called in DIX. Other DDXs need to
define these in order to avoid an undefined symbol error at link time
when building alongside XWin. Xnest and Xvfb already provide empty stubs;
this does the same for Xdmx and the platform-neutral KDrive servers.
Also add a prototype to avoid a warning in all DDXs.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The previous code was copied and in both cases incorrectly fixed
up the colormaps after resizing the visuals, this patch consolidates
the visual resize + colormaps fixups in one place. This version
also consolidates the vid allocation for the DepthPtr inside the
function.
I'm not 100% sure colormap.[ch] is the correct place for this but
visuals are mostly created in fb and I know thats not the place to
be resizing them.
Fixes fd.o bug #19470.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
include/protocol-versions.h specifies each extension version as supported by
the server and sent back on the wire to the client.
This fixes up several issues with the server potentially reporting a higher
version of the protocol if recompiled against a newer version of the
protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
Now that all event queues hold internal events only, they never need
to be resized. Resizing them led to memory corruption as they would
get sized for an appropriate xEvent, not an internal event.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Boolean option to enable/disable SIGIO handlers is set by the first
of these found:
- UseSIGIO option is set in xorg.conf ServerFlags
- Default set at build time by ./configure --enable-use-sigio-by-default
- Platform default value: Solaris = no, all others = yes
This matches the current settings on all platforms except Solaris.
This reverts Solaris (for now) to the settings used in Xorg 1.6, before
SIGIO support for Solaris was added, due to some system level bugs that
won't be resolved in time for Xorg 1.7 release, but allows us to enable
when those are resolved (or when we need to test if they're resolved).
See http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6879897
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For core and XI1 events, store the key_repeat flag in the sequence number
until TryClientEvents. The sequenceNumber is unset until TryClientEvents.
[Also thrown in, some random indentation changes. Thanks]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bits above XI2LASTEVENT are invalid and cause in BadValues. These checks
must be performed anywhere where a mask_len parameter is given.
This patch also adds the missing checks to grab masks.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds support for using the libpciaccess interface for
vga arbitration support on top of a kernel which supports it.
Currently patches are queued for kernel 2.6.32 in jbarnes
pci tree, and shipping in Fedora kernel.
Co-authors:
Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch corrects a misnaming of XTest-related functions.
The extension itself announces itself as XTEST. Xtst is the library name
itself, but all library functions are prefixed by XTest. Same with the
naming in the server.
- Rename all *Xtst* functions to *XTest* for consistency with the library
and in-server API.
- Rename the "Xtst device" property to "XTEST device" for consistency with
the extension naming.
- Rename the device naming to "<master device name> XTEST device". The
default xtest devices become "Virtual core XTEST pointer" and "Virtual
core XTEST keyboard".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The smart scheduler is designed to minimize scheduler overhead by
increasing the interval between WaitForSomething calls when a single
client is running. However, the software rotation code depends on
its BlockHandler being invoked for screen updates; the long delays
caused by the smart scheduler optimizations means that screen updates
can be delayed a long time as well.
The change is simple -- prevent the smart scheduler from increasing
the scheduling interval while any screen is using software rotation.
Signed-off-by: Keith Packard <keithp@keithp.com>
The extern declaration in xichangehierarchy.c was broken anyway.
This fixes a crash on creating a new master device.
Reported-by: Maxim Levitsky
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DCEs are now processed when sent throught the master device, not when sent
through the slave device. This includes a removal of some un-used (or partly
used) fields in the DCE itself to something more self-explanatory.
TODO: if a device has events queued and its attachment is changed, the DCE
is silently dropped now. Instead, it should be generated as soon as the
first event after the attachment is sent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
And shuffle them around so that the part used by drivers is up the top and
commented.
Also, woo, the sdksyms script doesn't like declarations with return type and
function name on the same line...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If you want to run a pre-1999 kernel, you'll need a pre-2009 X server
[Some pre-Solaris 8 VT support is left by this patch to allow reuse by
the new Solaris VT support that follows in the next patch.]
Signed-off-by: Aaron Zang <Aaron.Zang@Sun.COM>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Use enum EventType instead of ints. This requires a load of default
cases in various switch statements to silence compiler warnings.
Reported-by: Aaron Plattner
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
* Makefile.am: Include the test/ subdirectory in the dist tarball.
* include/Makefile.am: Move events.h to sdk_HEADERS and eventconvert.h to
EXTRA_DIST so they're included in the tarball. events.h shouldn't be
included in the SDK either, but for now it's needed by input.h.
This patch adds the following three functions:
bits_to_bytes(bits) - the number of bytes needed to hold 'bits'
bytes_to_int32(bytes) - the number of 4-byte units to hold 'bytes'
pad_to_int32(bytes) - the closest multiple of 4 equal to or larger than
'bytes'.
All three operations are common in protocol processing and currently the
server has ((foo + 7)/8 + 3)/4 operations all over the place. A common set
of functions reduce the error rate of these (albeit simple) calculations and
improve readability of the code.
The functions do not check for overflow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reverts the following four patches:
feb757f384 "XKB: Sanitise vmods for redirected keys"
b5f49382fe "XKB: Sanitise ctrls action"
1bd7fd195d "XKB: Sanitise pointer actions"
61c508fa78 "XKB: Sanitise vmods in actions"
Strictly speaking, the structs used in the server are not part of the client
ABI. Practically, they are as we copy from the wire straight into the
structs. Changing the struct sizes breaks various wire/server conversions.
Even when the structs have the same size, some internal magic causes
conversions to fail. Visible by diffing the output files of:
setxkbmap -layout de; xkbcomp -xkb :0 busted.xkb
setxkbmap -layout de -print | xkbcomp -xkb - correct.xkb
Interestingly enough, busted.xkb is the working one although the output is
incorrect. Revert the four offending patches until the exact cause of this
breakage can be determined.
This patch restores functionality to Level3 modifiers.
X.Org Bug 19602 <http://bugs.freedesktop.org/show_bug.cgi?id=19602>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The number of input devices is MAXDEVICES, not MAX_DEVICES (f781a752e6)
Two comments updated to refer to MAXDEVICES.
MAX_FUNCS in sigio.c was set to 16 if MAX_DEVICES was undefined. If more
than 15 physical input devices were present, this could result in a
failure to install the SIGIO handler for any device above 15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xtst devices get this property assigned automatically so they can be
detected easily by a client.
The property is read-only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than storing a simple boolean in the devPrivate for XTest devices,
store the actual master device's id (since it is constant for the life of
the device anyway).
Callers should use GetXtstDevice now instead of digging around in the
devPrivates themselves.
This patch allows for a cleanup in the creation of new master devices since
GetMaster and GetXtstDevice spare the need for loops, IsPointer checks and
similar.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
The callers should need to use the dev privates key to look up xtest
devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
This makes the ptr accel api actually sensible from a driver
perspective, since it avoids superfluous device lookups.
Also, makes independent accel contexts possible.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This will be used for follow-up checks after a client has written something,
for security modules that enforce a set of valid values a client can set.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Presumably, some intelligent, XI2-aware management app will be calling
XISetClientPointer on behalf of other clients; this check makes sure
the target client has permission on the device.
Requires changing the prototype to return status code instead of Bool.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Master devices provide the union of all attached slave devices' buttons,
i.e. the number of buttons on the master device is always the number of
buttons of the slave device with the highest number of buttons. When slaves
are attached or detached, the master device adjusts the button number to
reflect the new buttons.
On a slave switch, this slave's button labels are copied into the master (up
to slave->num_buttons). The remaining button labels (if any) stay as they
are. Thus, if any of the higher buttons is still pressed, it reflects the
label of the last pressed device that provided this button.
If two devices press the same button and it is differently labelled the last
pressed one will be reflected in the master device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: ABI break, but ABI_XINPUT_VERSION has NOT been bumped. Recompile input
drivers.
Revert "Xi: return BadImplementation for deviceids 256 and above"
This reverts commit 2b459f44f3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
inputstr includes XI2proto.h for the sole purpose of XI_LASTEVENT.
However, using XI_LASTEVENT in the server is prone to errors, if the server
is recompiled against a newer version of the protocol it would bump this
variable and associates bits, including potential ABI.
This patch defines an XI2LASTEVENT for use in the server and removes the
XI2proto.h require. XI2LASTEVENT is the current value of XI_LASTEVENT.
This patch is required by components that require access to inputInfo
(currently xf86-video-geode and xf86-video-cirrus) but should not have a
require for the XI2 protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This stops inputstr.h being needed to be included by output drivers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These grabs are suported through two fake devices inputInfo.all_devices and
inputInfo.all_master_devices. These devices are not part of the device list
and are only initialised for their device id, nothing else.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a passive enter or focus in grab activates, send additional enter or
focus events with mode XIPassiveGrabNotify to the grabbing client.
Likewise, if the grab deactivates, send additional leave or focus out
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Enter grabs are checked for in CheckMotion(), each time the sprite window
changes the current grab is deactivated (if applicable) and the new grab is
activated (if applicable). Exception - if the grab is on a parent window of
the current window since we keep the grab across descendants.
Since CheckMotion() may change the grab status of a device, we mustn't get
"dev->deviceGrab.grab" in ProcessOtherEvents until after CheckMotion().
FocusIn grabs are checked in much the same manner.
The event delivery for grabs replaces the NotifyNormal on window change with
a NotifyGrab on window change. Note that this happens before the grab
activates, so the EnterNotify(NotifyGrab) is still delivered to the window,
not to the grabbing client. This is in line with the core protocol semantics
for NotifyGrab events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Copying all classes into the master device has drawbacks for hybrid devices
(devices that are both mice and keyboards). If such a device posts an event,
it's key classes are moved into the VCP. The key event itself is unaffected
by keyboard grabs and the like.
Partial class copying copies depending on the event and copies the classes
into the right master device (i.e. the VCK for key events, the VCP for
pointer events).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For hybrid devices (keys + buttons/axes) the attached master device is
generally the wrong one. One shouldn't post a button event through a
keyboard and vice versa.
GetMaster(dev) returns the right master device for the given type needed.
This may be the MD paired with this device's MD.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ChangeDeviceId would actually overwrite the flags field if deviceid wasn't
present. Aside from the event of course not telling which device generated
it in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no need for internal events to be a struct with a single nested
union, we might as well make the union itself the InternalEvent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
dev->u.lastSlave was not signal safe since it was accessed by the DIX and
during signal handling.
Replaced with:
'dev->last.slave' for the signal handler's lastSlave (used to generate
DeviceChangedEvents), .
'dev->u.lastSlave' for the DIX lastSlave (currently only used in
change_modmap)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This type is only used in XI to give a hint of what type this device may be.
Call it xinput_type for clarity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
This is a shorthand for disabling acceleration, while retaining the
possiblity to use constant deceleration. If constant deceleration is
also unused, it will optimize motion processing.
Other possiblities to deactivate acceleration were quite hidden,
and didn't always work as expected. E.g. xset m 1 1 would retain
adaptive deceleration, while xset m 1 0 would not (in the default
profile).
Also removes the 'reserved' profile; it was unused and it's trivial
to add new ones anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the Xtest virtual slave devices we have 4 devices for each MD
pointer/keyboard pair, plus the AllDevices and AllMasterDevices reserved
deviceids. It's quite easy to hit the current limit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the Xtest virtual slave devices we have 4 devices for each MD
pointer/keyboard pair, plus the AllDevices and AllMasterDevices reserved
deviceids. It's quite easy to hit the current limit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For embedded use, it's convenient to be able to disable the cursor
completely, without having to audit and fix up all your third-party
code (e.g. Mozilla Firefox).
Add -nocursor and -cursor server options to enable and disable the
cursor. The default is still -cursor, but embedded users can run the
server with -nocursor to hide the cursor regardless of what
application developers do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A XTest virtual slave device pair (kbd/ptr) exists for every master
device pair. This is so XTest events are correctly propogated via slave
devices up to Master devices and the classes are correctly changed along
the way. We add the XTest slave device pair to the Virtual Core pointer
and provide a simple way of creating the devices.
A XTest Slave Device is identified by the XTstDevicePrivateKey property
being set in the devices devProperties
XI events are still propagated through the matching device, in the hope the
client knows what it is doing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allocating a slave device is essentially the same as allocating a master device.
Hence we rename AllocMaster to AllocDevicePair and provided the ability to
indicate if a master or slave device pair is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No traces of FID in the xserver nor in the modules listed in
util/modular/xorg.modules
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Yes, this means we have even more arguments to GrabDevice. But it beats having
a copy of most but not all of GrabDevice in ProcGrabPointer.
Also, reshuffle the order of parameters, the CARD* status is a return value
and should be last.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Split ChangeMasterDeviceClasses into an extra XISendDeviceChangedEvent that
assembles the XI2 wire event for the DeviceChanged event. Re-use this when
detaching the last SD.
Not quite perfect yet, we still copy the device classes from the slave now
rather than from the data we had when the event occured. But it's a start.
(We can now unexport SizeDeviceInfo and CopySwapDevices, not needed anymore)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The masks were originally designed to generically handle event masks for
extensions. Since all that is in-server anyway, it's much better writing
custom event masks for those extensions that need it and not providing a
unified mechanism.
XI2 needs more than the current implementation, which is already too complex
for most other extensions. good riddance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Best to FatalError if a wrong event comes in. At least that forces me to fix
it really quickly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Replace multi-stage filtering with simple linear velocity,
tracked several instances backwards. A heuristic ensures
only approximately linear motion is considered, so velocity
remains valid in any case. Numerical stability is much
better, and nothing changes to people who didn't tune the
advanced features of the previous algorithm.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Requires libselinux 2.0.79 or newer. Without this, libselinux will
check for policy updates on the netlink socket on basically every policy
lookup. Statistically speaking, they never happen, and the check
translates to at least one more syscall on basically every operation.
Instead, take control of the fd from the library, and check it in
WakeupHandler if it polls readable.
dixLookupResource attempted to automatically detect whether the caller
wanted a lookup by-type or by-class, unfortunately, it guessed wrong for
RT_NONE. Instead of trying to make the guess better, this patch just reverts
the unification and creates separate functions for each operation.
Mostly the same buttons as defined by linux/input.h, with five exceptions:
"Button Unknown" for a button that cannot be labelled.
"Button Wheel Up", "Button Wheel Down" for buttons 4/5, traditionally the
wheel buttons.
"Button Horiz Wheel Up", "Button Horiz Wheel Down" for buttons 6/7,
traditionally the horiz. wheel buttons.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Don't pass xEvent* and count through to processing, pass a single
InternalEvent.
Custom handlers are disabled for the time being. And for extra fun,
XKB's pointer motion emulation is disabled. But stick an error in there so
that we get reminded should we forget about it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the API change, we can now purge the XI conversion from POE.
Note: this commit breaks DGA even more.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
deviceGrab.sync.event is now an internal event, and CheckDeviceGrabs and
friends is changed over.
Note that this currently breaks some frozen grabs. See towards the end of
ComputeFreezes().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that we're only partially switched to internal events. The event in the
devices' event queue (dev->deviceGrab.sync.event) is still an XI event. The
events in syncEvents are InternalEvents only now.
This also implies fixing CheckVirtualMotion to work with internal events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Get rid of the deviceValuator processing and a few other things, but still
drop back into XI before checking device grabs or doing anything else.
NoticeEventTime now needs to take InternalEvents, and while we're at it,
change NoticeTime from a macro to a function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
Before dropping down into the DIX, convert back into XI events. This is a
temporary solution only, until the DIX is capable of handling InternalEvents
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This gets rid of the nevents parameter, InternalEvents are always a single
item per event. Also remove the special DeviceValuator handling in both
enqueueing and dequeueing.
Custom callback handlers are now broken until fixed.
For bisectability, we copy the InternalEvent back into the XI required during
POE and friends. Consider this a temporary solution.
Note: Because of misc linker bonghits, Xvfb won't link in this revision.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Convert from an InternalEvent type to the matching core/XI type. Currently
only for a few events, those we actually need in the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is the event we want to feed into the EQ and process on the way through.
Only applies for input events for now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather, modify the two callers to call separately for the two different.
events. Unexport SetMaskForEvent too.
And while we're at it, get rid of the MotionFilter macro, because it's one
half confusing and one half pointless.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
They end up being the same anyway on startup, so let's not have a dynamic mask
assignment mechanism and instead just hardcode them already.
Also unexport SelectForWindow and remove the valid_masks parameter. We can
check that before calling, since there's only one caller anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The algorithm is split in a 2D-specific and a general part.
This potentially allows to accelerate more than just screen motion.
A state machine is intoduced to make code more explicit and readable.
It also improves handling of 'phase 1' mickeys when axial correction
kicks in (corner case).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Changes MakeAtom to take a const char * and NameForAtom to return them,
since many callers pass pointers to constant strings stored in read-only
ELF sections. Updates in-tree callers as necessary to clear const
mismatch warnings introduced by this change.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
This is copied from linux/input.h, presumably that's the ones at least the
Linux kernel can give us for any device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This mirrors that in KeyClassRec: the state of the buttons as posted to
GetPointerEvents, rather than the state of the buttons as processed by
ProcessOtherEvent and friends.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Everything goes through XKB's Process{Keyboard,Pointer}Event on its way
through to ProcessOtherEvent now, so get rid of the old, useless functions.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of always keeping two copies of the keymap, only generate the
core keymap from the XKB keymap when we really need to, and use the XKB
keymap as the canonical keymap.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Replace both core and Xi functions with one function that validates the
proposed map, and sends out both kinds of notification.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keyboard map notifications are always generated from within XKB code,
which also takes care of copying the keysyms, etc. If you need to
mangle the keymap yourself, generate a new core keymap/modmap, and pass
it to XkbApplyMappingChange.
SendMappingNotify is renamed to SendPointerMappingNotify (and ditto its
Device variants), which still only _sends_ the notifications, as opposed
to also doing the copying a la XkbApplyMappingChange.
Also have the modmap change code traverse the device hierachy, rather
than just going off the core keyboard.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
XIShouldNotify just lets you know if you should send an event for a
keymap change (or similar) concerning a given device to a given client;
at the moment, this is only for devices which are sending events to that
client.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Turn two unsigned chars into one unsigned int for both vmods and the
vmod mask. As a bonus, remove broken unused accessor macro for setting
the vmods.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Turn four unsigned chars into one unsigned long.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Turn vmods from two unsigned chars into one int.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For some reason, we insist on having daft internal representations that
make no sense, that always have to be converted to be used. We should
really sort this one out.
Also, comment the hojillion members of XkbStateRec.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
We don't use them, as they're not up to the task. We'll get a better
solution someday, promise.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When we find something weird in the rules, don't stash it as an extra
freeform component, just state that the rules file is likely broken and
move on with our lives.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have modmap (in the exact same format!) in XKB, so just use
that all the time, instead of duplicating the information.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since modifierKeyMap is generated from modifierMap, just remove it, and
only generate it when we need to send the modifier map to the client.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XkbInitKeyboardDeviceStruct is now the only valid keyboard
initialisation: all the details are hidden behind here. This now makes
it impossible to supply a core keymap at startup.
If dev->key is valid, dev->key->xkbInfo->desc is also valid.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For some reason, XKB allows clients to set a global (!) flag that simply
turns lock keys into state no-ops. Ignore this flag.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
XkbRMLVOSet is just a set of strings for rules, model, layout, variant
and options; use that in preference to XkbRF_VarDefsRec, which is a
hideously complicated monster that somehow managed to not include the
actual rules.
While we're at it, clean up xkbrules.h so it doesn't require xkbstr.h.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Instead of hardcoding base/pc105/us, allow users to change the defaults at
./configure time. Change the default model to be evdev on Linux.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This fixes the following bug. Assuming your window manager grabs
Alt+Button1 to move windows, map Button3 to 0 via XSetPointerMapping,
then press the physical button 3 (this shouldn't have any effect), press
Alt and then button 1. The press event is delivered to the application
instead of firing the grab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: properties don't need to be cleaned up, the DIX does it for us anyway.
Data that is stored in properties is cleaned up by the property system.
Handlers, etc. don't need to be unregistered while cleaning up, as they get
deleted when the device is removed anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
If the MD's lastSlave was a devices with custom axes ranges, then a
WarpPointer would position the cursor at the wrong location. A WarpPointer
request provides screen coordinates and these coordinates were scaled to the
device range before warping.
This patch consists of two parts:
1) in the WarpPointer handling, get the lastSlave and post the event through
this device.
2) assume that WarpPointer coordinates are always in screen coordinates and
scale them to device coordinates in GPE before continuing. Note that this
breaks device-coordinate based XWarpDevicePointer calls (for which the spec
isn't nailed down yet anyway) until a better solution is found.
X.Org Bug 19297 <http://bugs.freedesktop.org/show_bug.cgi?id=19297>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This property is used to denote type float for input properties. Such
properties can be accessed easily through the XIPropToFloat() function.
Code originally written by Simon Thum.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Converts an XIPropertyValuePtr to an integer, provided that type and format is
right.
Code originally written by Simon Thum.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This commit moves the focus handling from events.c into enterleave.c and
implements a model similar to the core enter/leave model.
For a full description of the model, see:
http://lists.freedesktop.org/archives/xorg/2008-December/041740.html
This commit also gets rid of the focusinout array in the WindowRec, ditching
it in favour of a local array that keeps the current focus window for each
device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of keeping a flag on each window for the devices that are in this
window, keep a local array that holds the current pointer window for each
device. Benefit: searching for the first descendant of a pointer is a simple
run through the array.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The builtin-fonts configure option was removed, as it at best should
have been a runtime option. Instead, now it always register all "font
path element" backends, and adds built-ins fonts at the end of the
default font path.
This should be a more reasonable solution, to "correct" the most
common Xorg FAQ (could not open default font 'fixed'), and also don't
break by default applications that use only the standard/historical
X Font rendering.
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
Those tables were once used to decide what symbols are visible to
modules, but they were outdated. The only real usage was that, since
it was taking the address of symbols, linkage should fail if the
symbols were not available.
Now the proper way to make symbols available to modules should
be to use the _X_EXPORT macro, or not compile with hidden symbols,
so that all symbols would be available.
All symbols in the tables were revised to ensure they are exported,
and only symbols that were not exported are ClientSleepUntil() and
DuplicateModule(), that were not in the sdk for quite some time
already, and should not have any users outside of the X Server
(and/or builtin modules).
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
The device's button down state array was changed to use DOWN_LENGTH and thus
bitflags for each button in cfcb3da7.
Update the DBSN events to copy this bit-wise state.
Update xkb and Xi to check for the bit flag instead of the array value.
Reported by ajax.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The warnings corrected were only the ones that should correct
real problems. The most common one is 64 bit integers as
"printf %l" arguments.
Note that there is a patch related to this at:
http://bugs.freedesktop.org/show_bug.cgi?id=18204
These symbols were removed from the X Server, or never declared.
One symbol that may need special attention is XkbBuildCoreState(),
that doesn't have a prototype anywhere, but is called from
xkb/xkbEvents.c:XkbFilterEvents(), and also used by the macros
XkbStateFieldFromRec() and XkbGrabStateFromRec() defined in
include/xkbstr.h.
fb/wfbrename.h also may need some cleanup, as it makes several
"renames" of non existing symbols.
I merged the wrong patch. See correct patch at:
http://lists.freedesktop.org/archives/xorg/2008-November/040540.html
Not activating the device before attempting to enable it would leave the
sprite unset, crashing the server when enabling the real devices.
This reverts commit e078901a4e.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Added a configure option called --enable-standalone-xpbproxy which is useful for deveoping xpbproxy.
The 'active' switch in preferences just disables the in-server xpbproxy (not this standalone).
(cherry picked from commit 42944936326ef8732f622db9f75b79a92980550d)
We need them for each window, every time a window is allocated. Storing them
in a devPrivate is the wrong thing to do.
This also removes the unused ENTER_LEAVE_SEMAPHORE_ISSET macro.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
If the event is an XI event, we need to work on the correct device, not on
the VCK.
Adds XIGetDevice(event) function to extract the device from an event.
Really, this was a bad idea. It's not security, the UI features that would
have been cool (e.g. clicking through windows) aren't implemented anyway, and
there's nothing you can't achieve just by using plain XI anyway.
Requires inputproto 1.9.99.6.
These weren't even being used, which isn't overly surprising, given that
they were already in the struct.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
The current code exposes to inconsistent updates, i.e. if handler N succeeds
but handler N+1 fails in setting the property, an error is returned to the
client although parts of the server now behave as if the property change
succeeded.
This patch adds a "checkonly" parameter to the SetProperty handler. The
handlers are then called twice, once with checkonly set to TRUE.
On the checkonly run, handlers _MUST_ return error codes if the property
cannot be applied. Handlers are not permitted to actually apply the changes.
On the second run, handlers are permitted to apply property changes.
Errors codes returned on the second run are ignored.
A property can only be deleted if any of the following is true:
- if a property is deletable and all handlers return Success.
- if a property is non-deleteable and the all handlers return Success AND the
delete request does not come from a client (i.e. driver or the server).
A client can never delete a non-deletable property.
Now that the code has been fixed so that Unmap means unmap and not "don't
remap", 'remap' was confusing to have in the function names/parameters, so
change it to simple 'map'.
Signed-off-by: Keith Packard <keithp@keithp.com>
This removes yet another xalloc() each server generation. Also, I
couldn't find the corresponding xfree() so I guess that used to be a
memory leak there.
This was to account for cases where you had video and print screens in
the same server. Lunacy. Leave the slot in ScreenInfo, but rename it,
and stop looking at it.
OsInitColors always just returned TRUE, so just remove calls to it and
insane special-case logic. Remove unused kcolor.c implementation, and
merge oscolor.h into oscolor.c since it was the only user. Remove
open-coded strncasecmp in oscolor.c.
Since we no longer need to call OsInitColors after reading the config
file, just call PostConfigInit() from one place, and move PM handling to
one place so we can install the signal handlers earlier.
Add strncasecmp (as we're now using it) in case someone doesn't have it,
and also change strncasecmp args to be const, in accordance with
everything else.
We may need more than one handler to deal with a property (e.g. one in the
driver, one in the DIX), so get the handlers into a linked list and call them
one-by-one. This is of course slightly less entertaining than the hilarious
WRAP/UNWRAP game we play in other parts of the server.
XIRegisterPropertyHandler/XIUnregisterPropertyHandler are the interface
drivers/the DIX should use to attach themselves to the device.
XIDeleteAllDeviceProperties destroys everything, including the handlers.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Basically just copied from randr properties, with minor changes only.
Each device supports arbitrary properties that can be modified by clients.
Modifications to the properties are passed to the driver (if applicable) and
can then affect the configuration of the device.
Note that device properties are limited to a specific device. A property set
on a slave device does not migrate to the master.
Using id = 0 only worked pre-MPX since XInput didn't allow XOpenDevice for the
core devices (0 and 1). Now we can now legally register for events so we may
overwrite our device-independent classes with the ones selected for the VCP.
So, increase the EMASKSIZE to MAX_DEVICES + 1 and use MAX_DEVICES as the ID
when we don't have a device.
Spiritual revert of 1fa4de80fc. Intel's C
compiler claims to be gcc-compatible; if they're not defining the same
macros as gcc then that's their bug, not ours. Even if we were to do
this aliasing we should do it once and for all in servermd.h.
Mixing usage where some parts of the code treated this field as a bitmask
and other parts as an array of card8 was wrong, and as the wire protocol
wanted bitmasks, it was less invasive to switch the newer counting code use
booleans.
Master devices track slave buttons by waiting for all slave buttons to be
released before delivering the release event to the client.
This also removes the state merging code in DeepCopyDeviceClasses -- that
code was changing master device state without delivering any events,
violating protocol invariants. The result will be that existing slave
button state which does not match the master will not be visible through the
master device. Fixing this would require that we synthesize events in this
function, which seems like a bad idea. Note that keyboards have the same
issue.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
device->button->down used to be a 32-byte bitmask with one bit for each
button. This has changed into a 256-byte array, with one byte assigned for
each button. Some of the callers were still using this array as a bitmask
however, this is fixed with this patch.
Thanks to Keith Packard for pointing this out. See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036202.html
This code hasn't been updated with anything even resembling what anyone is
shipping in nearly thirty months. It hasn't built out of the box since
7.1. Most of its features over AIGLX are accomplished with DRI2 and
friends.
We only have one set of default rules options in xkb. When the second keyboard
is brought up with Xkb options specified, these new options overwrite the old.
In future server generations, the rules used for the VCK are a mixture of the
default ones and ones previously specified for other keyboards. Simply
resetting the xkb default rules to NULL avoids this issue.
Reproducable by setting XkbLayout "de" and XkbVariant "nodeadkeys". In the
second server generation, the VCK has "us(nodeadkeys)". This again produces a
SIGABRT when the first key is hit.
I could not figure out why the SIGABRT happens. This patch is avoiding the
issue rather than fixing it.
Add each event to the master's MH as well as to the SDs. In the MD, store
min/max and the actual value. When retrieving the MH, rescale all coordinates
to the current coordinate range and only post those valuators that are
currently active on the device.
Since we can't predict how many valuators may be in a future SD attached to an
MD, we need to preallocate a history buffer that is large enough to keep
MAX_VALUATORS coordinates per event.
In addition, the history buffer needs to memorize the coordinate ranges at the
time, thus requiring MDs to store (min_val, max_val, current_val, time)
instead of (current_val, time) for each motion history entry.
This commit only fixes the allocation.
With the MD/SD device hierarchy we need control over the generation of the
motion history as well as the conversion later before posting it to the
client. So let's not let the drivers change it.
No x.org driver currently uses it anyway, linuxwacom doesn't either so dumping
it seems safe enough.
Assuming master->last.valuators is in screen coords, SD's are always in device
coordinates.
1. If an event comes in, scale masters->last to the device, drop into device's
last->valuators.
2. Apply motion from the actual event
3. Scale back to screen coords, check if we may need to cross screens
4. Drop screen coords into master->last
5. Rescale to device coords, drop into deviceValuator event and SD->last
6. Drop screen coords into ev->root_x/y
Whoopee...
During GetPointerEvents (and others), we need to access the last coordinates
posted for this device from the driver (not as posted to the client!). Lastx/y
is ok if we only have two axes, but with more complex devices we also need to
transition between all other axes.
ABI break, recompile your input drivers.
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
After UpdateDeviceState, the device has the current position in absolute
coordinates, the event has the correct valuator data to be delivered to the
client.
Remember the version the client sent to us, so we can adjust our replies
accordingly. This requires the client to use the {major|minor}Version fields
in the GetExtensionVersion request. However, they were padding before, so we
must assume they are garbage if nbytes is non-zero. If nbytes is zero, the
client is probably a new client and we can handle it correctly.
This extension provided bug-compatibility with pre-X11R6, but has been
stubbed out in our server since 2006 to return BadRequest when you actually
asked for it.
A few pieces of code were abusing this define for other purposes, which are
converted to #ifndef DEBUG instead. There should be no ABI consequences
to this change.
The rationale is that having the define in xorg-server.h also disables
assert() drivers, which is unexpected, and also difficult to avoid since
xorg-server.h is included in their config.h, and you can't put a #undef in
config.h. As for removing it from the server instead of moving it to an
internal header, we probably shouldn't have unnecessary assert()s in
critical server paths anyway, and if we do we could #define NDEBUG in the
specific cases needed.
Instead of a simple counter, use bits to keep track of which device is where
etc. When device enters a window (or sets focus), the bit matching the device
is set, when it leaves again, it is unset. If there are 0 bits set, then
Leave/Enter/Focus events may be sent to the client.
Same theory as before, but this should get around the insanity with
Grab/Ungrab special cases. Those cases are basically untested though.
If input processing is frozen, only wrap realInputProc: don't smash
processInputProc as well. When input processing is thawed, pIP will be
rewrapped correctly.
This supersedes the previous workaround in 50e80c9.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Daniel Stone
Alan Coopersmith
Keith Packard
Dave Airlie
Peter Hutterer
Chase Douglas
Jeremy Huddleston
Simon Thum
Michal Suchanek
Yaakov Selkowitz
Daniel Kurtz
Erkki Seppälä
Rami Ylimäki
Adam Jackson
Antoine Martin
Alexandr Shadchin
Tiago Vignatti
Lennart Poettering
Matt Turner
Jamey Sharp
Ville Syrjälä
Søren Sandmann Pedersen
Christopher James Halse Rogers
Ville Syrjala
Cyril Brulebois
James Jones
Joe Shaw
Macpaul Lin
Robert Hooker
Jesse Barnes
Kristian Høgsberg
Dan Nicholson
Mikhail Gusarov
Pierre-Loup A. Griffais
Peter Korsgaard
Oliver McFadden
Adam Tkac
Chris Humbert
Aaron Plattner
Fernando Carrijo
Francisco Jerez
Eamon Walsh
Chris Dekter
Rami Ylimaki
Benjamin Tissoires
Julien Cristau
Alan Coopersmith
Ingmar Vanhassel
Gaetan Nadon
Jeremy Huddleston
Matthieu Herrb
Ian Romanick
Aaron Zang
Nicolai Hähnle
Simon Farnsworth
Benjamin Close
Eric Anholt
Tomas Carnecky
Peter Hutterer
Thomas Jaeger
Michel Dänzer
Paulo Cesar Pereira de Andrade
Rémi Cardona
Maarten Maathuis
Tiago Vignatti
John Tapsell
Owen Taylor
Mathieu Bérard
Matthieu Herrb
Peter Hutterer
George Sapountzis
Kazuhiro Inaoka
Ross Burton
Ben Byer
Michel Dänzer
Peter Hutterer