These functions aren't used by any known driver and it doesn't make much sense
calling them from there. So it's better to unexport them.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
public server module API headers shouldn't be clobbered with non-exported
definitions, so move them out to private header file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
public server module API headers shouldn't be clobbered with non-exported
definitions, so move them out to private header file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
public server module API headers shouldn't be clobbered with non-exported
definitions, so move them out to private header file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The DDX'es sometimes need to disable certain extensions. Instead of complex
include cascades with ifdef'ed ddx-specific include from dix code, it's
more clean to add some clear and explicit knobs set by the DDX'es individual
meson.build.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
HAL had been obsoleted by udev many years ago (and also was Linux-specific).
No need to keep it around any longer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This function is only called inside dri.c, not used by any drivers
(and wouldn't make sense to do so), so no need to keep it exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
If DRI2ScreenInit hasn't been called yet, DRI2Authenticate and
DRI2CreateDrawable2 cause the X server to crash. This has been observed
to happen on multiple modern Linux distros in various conditions,
including QEMU and VMware VMs. Make these functions more robust in order
to prevent the crash.
This patch was originally provided by Bernhard Übelacker and expanded
upon by Mark Wagner.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1053
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1534
Right now, we're only registering the depths of our visuals, which are
mirroring upstream's visuals. But forgotten to register the pixmap depths
that don't have an assiocated visual.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The old PCCONS driver only seems to be used on minimal install disks and
cannot coexist with newer ones, so there's probably no practical use case for
supporting it in Xorg anymore.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Since LogVMessageVerb() is now signal safe, we can use this one instead.
Leaving VErrorF() macro for backwards compat with drivers.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
It really doesn't seem to be necessary to protect a LogVMessageVerb()
call by extra mutex on windows only, while obviously not needed on
any other platform.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Since VErrorF() is now signal safe, we can use this one instead.
Leaving VErrorFSigSafe() macro for backwards compat with drivers.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Since ErrorF() is now signal safe, we can use this one instead.
Leaving ErrorFSigSafe() macro for backwards compat with drivers.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Since LogMessageVerb() is now signal safe, we can use this one instead.
Leaving LogMessageVerbSigSafe() macro for backwards compat with drivers.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This allows us to do further probing in the included meson files:
Individual subdirectories (eg. DDXes, extensions, OS layer, ...)
can now probe things that are only relevant to them - no need to fill
the already too fat includes/meson.build with even more things.
Preparation for upcoming commits that'll make us of that.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
No need for extra call to some demuxer function for nothing but setting a
simple bool variable. Setting the sync flag really is nothing more than just
writing some value into a variable, so it's trivial to just to do that, instead
of having an unncessarily complex "universal setter" for that.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
No need for extra call to some demuxer function for nothing but setting a
simple int variable. Setting verbosity level really is nothing more than just
writing some value into a variable, so it's trivial to just to do that, instead
of having an unncessarily complex "universal setter" for that.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
No need for extra call to some demuxer function for nothing but setting a
simple int variable. Setting verbosity level really is nothing more than just
writing some value into a variable, so it's trivial to just to do that, instead
of having an unncessarily complex "universal setter" for that.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Lots of logging functions, especially init and teardown aren't called
by any drivers/modules, so no need to keep them exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This function is doing the same like LogMessageVerb(), so no need to keep
around a duplicate implementation. Leaving it as a macro, until all callers,
also in drivers, have been migrated.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This function is doing the same like LogMessageVerb(), so no need to keep
around a duplicate implementation. Leaving it as a macro, until all callers,
also in drivers, have been migrated.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
PANORAMIX was the original working title of the extension, before it became
official standard. Just nobody cared about fixing the symbols to the official
naming.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Both xlib as well as the Xserver use the same identifier "GC" for
different types. While on xlib it's just the numerical ID of a GC,
the xserver defines a struct for it by the same name. This is this
ugly and needs ridiculous hacks for Xserver code that needs xlib.
Easy to solve by just renaming the GC typedef to GCRec (consistent
with how we're naming other structs) and replacing GC* by GCPtr.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The only consumer seems to be one BSD specific file, the few drivers using
the *_iopl seem to include it on their own. Thus, no need to keep it in
public headers.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Make it clear that stuff from this file really isn't supposed to be used
by dynamically loaded modules like drivers.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The DDX callbacks (where core/DIX calls into DDX) aren't supposed to be
called by drivers directly, so unexport them.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
These functions shouldn't be called by drivers or extensions, thus
shouldn't be exported. Also moving it to separate header, so the
already huge ones aren't cluttered with even more things.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
On NetBSD gives warning:
../hw/xfree86/common/xf86Configure.c: In function ‘xf86AddBusDeviceToConfigure’:
../hw/xfree86/common/xf86Configure.c:125:50: warning: array subscript has type ‘char’ [-Wchar-subscripts]
125 | for (j = 0; (lower_driver[j] = tolower(driver[j])); j++);
| ^
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
On NetBSD gives warning:
In file included from /usr/include/ctype.h:100,
from ../hw/xfree86/common/xf86pciBus.c:35:
../hw/xfree86/common/xf86pciBus.c: In function ‘xf86ParsePciBusString’:
../hw/xfree86/common/xf86pciBus.c:286:27: warning: array subscript has type ‘char’ [-Wchar-subscripts]
286 | if (!isdigit(d[i])) {
| ^
../hw/xfree86/common/xf86pciBus.c:293:23: warning: array subscript has type ‘char’ [-Wchar-subscripts]
293 | if (!isdigit(p[i])) {
| ^
../hw/xfree86/common/xf86pciBus.c:307:23: warning: array subscript has type ‘char’ [-Wchar-subscripts]
307 | if (!isdigit(p[i])) {
| ^
../hw/xfree86/common/xf86pciBus.c:320:23: warning: array subscript has type ‘char’ [-Wchar-subscripts]
320 | if (!isdigit(p[i])) {
| ^
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
On NetBSD gives warning:
In file included from /usr/include/ctype.h:100,
from ../hw/xfree86/common/xf86Option.c:39:
../hw/xfree86/common/xf86Option.c: In function ‘xf86NormalizeName’:
../hw/xfree86/common/xf86Option.c:915:25: warning: array subscript has type ‘char’ [-Wchar-subscripts]
915 | if (isupper(*p))
| ^
../hw/xfree86/common/xf86Option.c:916:32: warning: array subscript has type ‘char’ [-Wchar-subscripts]
916 | *q++ = tolower(*p);
| ^
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
On NetBSD gives warning:
In file included from /usr/include/ctype.h:100,
from ../hw/xfree86/common/xf86Bus.c:36:
../hw/xfree86/common/xf86Bus.c: In function ‘StringToBusType’:
../hw/xfree86/common/xf86Bus.c:270:22: warning: array subscript has type ‘char’ [-Wchar-subscripts]
270 | if (isdigit(busID[0])) {
| ^
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
systemd is linux specific and the actual implementation is under the
os-support layer of xfree86 ddx. Thus no need to keep it in global
include directory, putting it onto the linux specific os-support instead.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
DEV_MEM define isn't used by any drivers, and BSD seems to be the only
platform using /dev/pmem instead of /dev/mem - as well as the DEV_MEM
define from xf86_OSlib.h (Linux uses the symbol, but defines on its own)
Therefore, just define it where actually used and drop it from the global
xf86OSlib.h file.
Note that /dev/pmem refers to physical memory, not to be mixed up with
Linux's persistent memory subsys, which uses /dev/pmem[N] device nodes.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Public server module API shouldn't be clobbered with private definitions,
thus move them out to private header.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Doing so that struct OdevAttributes doesn't need to be exposed to
drivers anymore. It really doesn't seem to be a hot path, so not
inlining anymore shouldn't have any practical performance impact.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
public server module API headers shouldn't be clobbered with non-exported
definitions, so move them out to private header file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
public server module API headers shouldn't be clobbered with non-exported
definitions, so move them out to private header file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
public server module API headers shouldn't be clobbered with non-exported
definitions, so move them out to private header file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
public server module API headers shouldn't be clobbered with non-exported
definitions, so move them out to private header file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
public server module API headers shouldn't be clobbered with non-exported
definitions, so move them out to private header file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
public server module API headers shouldn't be clobbered with non-exported
definitions, so move them out to private header file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
public server module API headers shouldn't be clobbered with non-exported
definitions, so move them out to private header file.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Enrico Weigelt, metux IT consult
Doug Brown