These are exclusively used in one source file, so no need to keep them
in a global header.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Lots of logging functions, especially init and teardown aren't called
by any drivers/modules, so no need to keep them exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
PANORAMIX was the original working title of the extension, before it became
official standard. Just nobody cared about fixing the symbols to the official
naming.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The OS abstraction isn't really the right place for those flags,
they are're probably better off in their corresponding extensions.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Since most of the extension init logic (and on/off switches for them)
is driven from miext, this seems the appropriate place for the header.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This field isn't used by any drivers, and also better belongs into
the corresponding extension instead of OS adaption layer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This field isn't used by any drivers, and also better belongs into
the corresponding extension instead of OS adaption layer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This field isn't used by any drivers, and also better belongs into
the corresponding extension instead of OS adaption layer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This field isn't used by any drivers, and also better belongs into
the corresponding extension instead of OS adaption layer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This field isn't used by any drivers, and also better belongs into
the corresponding extension instead of OS adaption layer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This field isn't used by any drivers, and also better belongs into
the corresponding extension instead of OS adaption layer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This field isn't used by any drivers, and also better belongs into
the corresponding extension instead of OS adaption layer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This field isn't used by any drivers, and also better belongs into
the corresponding extension instead of OS adaption layer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
It's more robust / easier understandable programming style to use explicit
switch statements, case'ing on the constants defined in the protocol header,
instead of implicitly via a some opaque call table. It's also done this
way in the other extensions, so making the code a bit more consistent.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
When using struct initializers, all fields not set explicitly are zero.
Also no need to swap fields that are known to be zero.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The `majorVersion` and `minorVersion` fields are CARD16, thus need to be swapped.
OTOH, the lengths field is zero anyways, so no need to swap it.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Move extra complexity out of the dispatch functions, so they're
really just switch/case statements calling the actual handler procs.
Preparation for further steps.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
These dispatcher functions are much more complex than they're usually are
(just switch/case statement). Bring them in line with the standard scheme
used in the Xserver, so further steps become easier.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
These dispatcher functions are much more complex than they're usually are
(just switch/case statement). Bring them in line with the standard scheme
used in the Xserver, so further steps become easier.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The current way of switching between Xinerama and single-screen handlers
is quite complicated and needs call vector tables that are changed on
the fly, which in turn makes dispatching more complicated.
Reworking this into a simple and straight code flow, where individual request
procs just look at a flag to decide whether to call the Xinerama or single
screen version.
This isn't just much easier to understand (and debug), but also removes the need
or the call vectors, thus allowing further simplification of the dispatcher.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
A little bit of code simplification by using static initialization
of struct right at the point of declaration. Also dropping a few now
unneccessary zero assignments.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Coherently moving all reply struct decls and assignments into static
initialization right at declaration, just before it is getting byte-
swapped and sent out. Zero-assignments can be dropped here, since the
compiler automatically initializes all other fields to zero.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Some requests using different structs dependending on which protocol version
(v1 vs. v2) had been selected. That's is handled by coverting v1 structs into v2,
before proceeding with the actual handling.
The code flow of this is very complex and hard to understand. Cleaning this up
in several smaller steps, that are easier to digest.
This part moves the request payload structs (or pointers to them) into the
per-version branches. Within each branch following our usual scheme for
extension request handlers (eg. using the REQUEST*() macros and having a
pointer named `stuff` to the current request struct)
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Some requests using different structs dependending on which protocol version
(v1 vs. v2) had been selected. That's is handled by coverting v1 structs into v2,
before proceeding with the actual handling.
The code flow of this is very complex and hard to understand. Cleaning this up
in several smaller steps, that are easier to digest.
This part is splitting the huge request handlers into upper and lower half,
where the upper is doing the version check and converting v1 requests into v2,
while the lower one is doing the actual request processing, operating on the
struct pointer passed in from the upper one, instead of the client struct's
request buffer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Some requests using different structs dependending on which protocol version
(v1 vs. v2) had been selected. That's is handled by coverting v1 structs into v2,
before proceeding with the actual handling.
The code flow of this is very complex and hard to understand. Cleaning this up
in several smaller steps, that are easier to digest.
This moving the request size check into the if-version-X branches, to make it
some bit easier to undertand.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
These dispatcher functions are much more complex than they're usually are
(just switch/case statement). Bring them in line with the standard scheme
used in the Xserver, so further steps become easier.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Instead of having the request handler ask for fd's one by one, just read them
all into a little array in ClientRec struct. And also automatically clean up
after request had been handled.
Request handlers need to set the entries to -1 if they shouldn't be closed
automatically.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Several SProc's have become no-ops, just calling the actual Proc's,
so we can get rid of them entirely.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Several SProc's have become no-ops, just calling the actual Proc's,
so we can get rid of them entirely.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Several SProc's have become no-ops, just calling the actual Proc's,
so we can get rid of them entirely.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Several SProc's have become no-ops, just calling the actual Proc's,
so we can get rid of them entirely.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Several SProc's have become no-ops, just calling the actual Proc's,
so we can get rid of them entirely.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Several SProc's have become no-ops, just calling the actual Proc's,
so we can get rid of them entirely.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Several SProc's have become no-ops, just calling the actual Proc's,
so we can get rid of them entirely.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Several SProc's have become no-ops, just calling the actual Proc's,
so we can get rid of them entirely.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Several SProc's have become no-ops, just calling the actual Proc's,
so we can get rid of them entirely.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Several SProc's have become no-ops, just calling the actual Proc's,
so we can get rid of them entirely.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Enrico Weigelt, metux IT consult