Make xf86 RANDR wrap the EnterVT call chain, so it can re-probe the
outputs when a laptop comes back from suspend/unsuspend (actually, any
time that we enter our VT again). The X server should then send RR*
events to clients, so they can cope with a monitor that was unplugged
while the laptop was suspended.
Signed-off-by: Federico Mena Quintero <federico@novell.com>
Update icons directly to windows rather than modifying
the window's class. Respect custom icons overriden via
the configuration file.
fd.o bugzilla #4491
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Changed windialogs.c to set icons via window properties rather than class
properties, and use LoadImage() for small icons, because LoadIcon() can only open
large icons. Since this code is redundant across the dialogs, I put it in the
winCenterDialog function, along with a few other redundant instructions, and
renamed in winInitDialog().
Also, don't bogusly put our dialogs at the center of the virtual desktop if we
are on a multimonitor system (this causes the dialog to end up split across two
monitors in a dual-monitor side-by-side setup)
Corrections to use HWND_TOPMOST instead of HWND_TOP and not to use SWP_NOZORDER
from Colin Harrison
fd.o bugzilla #4491
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Many old monitors zero-fill the detailed descriptors, so check for that
to avoid a useless warning like:
(WW) RADEON(0): Unknown vendor-specific block 0
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 987579c930 moves main.c into
into libmain.a to be linked with separately, and updates the various
DDXs to link with libmain.a, except Xwin, which also needs this change.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
There's only two reasons for hierarchy events:
- device is added, removed, etc. In this case we want to send the event as
it happens.
- devices are added in a XIChangeDeviceHierarchy request. In this case we
only want one event cumulating all changes.
It reports vertical size in cm in the detailed mode.
X.Org bug#21750 <http://bugs.freedesktop.org/show_bug.cgi?id=21750>
Reported-by: Peter Poklop <Peter.Poklop@gmx.at>
Signed-off-by: Julien Cristau <jcristau@debian.org>
This way clients querying the gamma value via the VidMode extension at least
get the last value set via the same, rather than always something bogus.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
The reciprocal gamma value was missed in the first copy and this mistake was
propagated to the second one.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Error: Write outside array bounds at Xext/geext.c:406
in function 'GEWindowSetMask' [Symbolic analysis]
In array dereference of cli->nextSib[extension] with index 'extension'
Array size is 128 elements (of 4 bytes each), index <= 128
Error: Buffer overflow at dix/events.c:592
in function 'SetMaskForEvent' [Symbolic analysis]
In array dereference of filters[deviceid] with index 'deviceid'
Array size is 20 elements (of 512 bytes each), index >= 0 and index <= 20
Error: Read buffer overflow at hw/xfree86/loader/loader.c:226
in function 'LoaderOpen' [Symbolic analysis]
In array dereference of refCount[new_handle] with index 'new_handle'
Array size is 256 elements (of 4 bytes each), index >= 1 and index <= 256
These bugs were found using the Parfait source code analysis tool.
For more information see http://research.sun.com/projects/parfait
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We only put internal events into the queue now, so let's check for ET_Motion
rather than the MotionNotify.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A driver with this hook will take care of preparing the outputs & crtcs,
so calling the prepare functions will just cause unnecessary flicker.
Fixes bug #21077
For redirected rendering we end up with pixmaps (which the app thinks are
windows) that are double buffered.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Pierre Willenbrock <pierre@pirsoft.de>
Zapping is triggered by xkb these days, so note in the man page that it's the
Terminate_Server action. Since it's XKB, personal preferences towards or
against zapping should be achieved through xkb rulesets.
If Terminate_Server is not in the xkb actions, then we can't zap anyway and we
don't need a default of DontZap "on".
This patch restores the old meaning of DontZap - disallow zapping altogether,
regardless of XKB's current keymap.
Ideally, this patch should be accompanied by b0f64bdab00db652e in
xkeyboard-config.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This change implements the protocol for DRI2GetBuffersWithFormat, but
the bulk of the differences are the changes to the extension / driver
interface to make this function work. The old CreateBuffers and
DeleteBuffers routines are replaced with CreateBuffer and DeleteBuffer
(both singular).
This allows drivers to allocate buffers for a drawable one at a time.
As a result, 3D drivers can now allocate the (fake) front-buffer for a
window only when it is needed. Since 3D drivers only ask for the
front-buffer on demand, the real front-buffer is always created. This
allows CopyRegion impelemenations of SwapBuffers to continue working.
As with previous version of this code, if the client asks for the
front-buffer for a window, we instead give it the fake front-buffer.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@redhat.com>
commit 64b7f96dca accidentally inverted the comparison, could
result in crashes on some systems later on.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
This prevents building an older server with a new dri2proto.h from
resulting in a DRI2 extension module that lies about the version it
supports.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Rotation matrix for pointer coordinates was incomplete and pointers with
absolute coordinates did not work correctly in xserver (kdrive) when the
sceen was rotated other than by 0 degrees.
Signed-off-by: David Jander <david.jander@protonic.nl>
Signed-off-by: James Cloos <cloos@jhcloos.com>
Virtually all callers use
XkbGetRulesDefault(&rmlvo);
InitKeyboardDeviceStruct(..., rmlvo);
Let's save them the trouble and accept NULL as a hint to take the
default RMLVO.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
After the call to xf86ActivateDevice, the new device will be added to
inputInfo.devices. However, if the subsequent call to ActivateDevice
fails, the correponding InputInfoRec for the device is deleted but an
entry still remains in inputInfo.devices. This might lead to a server
crash later on (on InitAndStartDevices for instance) when the device
control proc would be called for an invalid device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This happened because we put a byte in the fd to wake up dispatch, but we never actually enqueued anything in mieq because the num_events was 0.
(cherry picked from commit c21ca7558d2faf93c61f5feaafd7c878e9e21942)
If a front-buffer is requested for a window, add the fake front-buffer
to the list of requested buffers.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Currently no code path exhibits the broken behavior since we only toggle into rootless if we don't have the root.
(cherry picked from commit 970f100ca3c5fc0662ae7658d49d118fbd9de943)
The changes actually caused all windows to move to the current space. Instead, we're going with a fix entirely within Xplugin that depends on quartz-wm being the window-manager for now.
(cherry picked from commit 997b6f3142c622541bb5bac98652abae75d1101d)
Otherwise if X11.app was activated with a mouse click, the location of the even is the last location of the cursor before X11 was deactivated
(cherry picked from commit c7457d7b31ddd2ddfd04dd6294bed4532664e1ab)
This panel reports its vertical size in cm.
X.Org bug#21000 <http://bugs.freedesktop.org/show_bug.cgi?id=21000>
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Patch courtesy of Codeweavers
Fix mouse movement tracking. For a non-window-related mouse-move event,
calculate the new position by adding the event's delta-x and delta-y values
to the previous mouse position. Do not rely on the current mouse position
because it may have been changed by a XWarpPointer call.
(cherry picked from commit 7a67935b05a475215b9bdbb959e4f7e15f32416f)
Otherwise APM events get treated as input events, which messes up idle
time accounting and screensavers and such. Not, we hope, that anyone
is using APM anymore.
Replace multi-stage filtering with simple linear velocity,
tracked several instances backwards. A heuristic ensures
only approximately linear motion is considered, so velocity
remains valid in any case. Numerical stability is much
better, and nothing changes to people who didn't tune the
advanced features of the previous algorithm.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
remove a few lines which redo part of the pointer acceleration
init. Properties is the way to go for them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix this bug report:
,----< from http://bugzilla.freedesktop.org/show_bug.cgi?id=20504 >
| Using the Visual StaticGray (8 bit depth) is missing one gray level.
| The gray level of index zero and index one are the same and all
| other levels are shifted by one. The max level (255) cannot be used.
`----
Signed-off-by: James Cloos <cloos@jhcloos.com>
We'll now only mention the E-EDID segment register if the device is
actually E-EDID-capable. While we're here, check for DDC/CI and
standard EEPROM support too.
There is a separate panning region check, but that doesn't work under
transformation, so just pre-clip the mouse coordinates when computing the
panning offsets. This leaves the case where panning constants are changing
unresolved.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=18710 .
As this can't work without new EXA_PREPARE_AUX* indices, this requires a major
version bump, so we can also drop the UploadToScratch driver hook and
ExaOffscreenSwap*(). So this also fixes
http://bugs.freedesktop.org/show_bug.cgi?id=20213 .
Moreover, introduce EXA_DRIVER_KNOWN_MAJOR to break compilation of drivers
which may not be able to handle EXA_PREPARE_AUX*, giving instructions how to
make them build again in the #error message.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
GLX_EXT_texture_from_pixmap was broken since commit
a26c77ff43 ('glx: fix retval checks when failures
occur for drawable creation.')
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
DeleteInputDeviceRequest function doesn't handle "virtual" devices well.
TightVNC libvnc.so module to X (which makes bare Xorg VNC capable) uses such
kind of devices.
Bare Xvnc (it is something like Xvfb) simply uses AddInputDevice &
RegisterDevice functions. Xvnc uses DeleteInputDeviceRequest from Xi/stubs.c
so everything works fine (now I see that DeleteInputDeviceRequest in
Xi/stubs.c should call RemoveDevice function, shouldn't it? :) )
Situation is quite different when you use libvnc.so module. It uses same
schema as Xvnc, so it simply calls AddInputDevice & RegisterDevice. Thus
device is created correctly. When server is terminated it calls
DeleteInputDeviceRequest (now from hw/xfree86/common/xf86Xinput.c) for each
device. Here is the difference - Xvnc calls DeleteInputDeviceRequest from
Xi/stubs.c as I wrote above. Thus Xorg gets sigsegv because "VNC" devices
don't have real input driver.
X.Org Bug 20087 <http://bugs.freedesktop.org/show_bug.cgi?id=20087>
[This isn't really a fix (libVNC should behave correctly) but not crashing the
server sounds like an improvement.]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With the API change, we can now purge the XI conversion from POE.
Note: this commit breaks DGA even more.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
Fix keyboard layout mapping table entry for Windows keyboard layout 0x80a
(Latin American), layout should (now) be 'latam', not 'la' which is Laos
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Seems we're less divorced from XKB than we'd like for now... hopefully not having any rules installed will still let us override things the way we want to...
This was causing a crash randomly, due to random memory contents.
Use xcalloc to prevent this in the future, due to future changes or mistakes.
Set the drawableType to include GLX_PIXMAP_BIT and GLX_PBUFFER_BIT.
The new libGL supports these.
Set the max Pbuffer width/height, based on the results of a test program.
We may someday want to revisit this depending on what users need, so that
we create a CGLContextObj, make it current, and call glGetIntegerv to
gather the information at runtime.
(cherry picked from commit c7e338330943e0d03a99328c740540d03f018d20)
Extensions section was added in X11R6.8.0 and documented in the release notes:
http://www.x.org/archive/X11R6.8.0/doc/RELNOTES2.html#3
but never made it into the man page.
Also fix a bonus typo.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
It had a copy and paste mistake that I didn't notice. :/
It was using the CreatePixmapReq.
Also add a missing B16 to the end of the length for the DestroyPixmapReq struct.
Now the AppleDRIDestroyPixmap request seem to work.
(cherry picked from commit 295fe25bd8fa2d141291a9d9b6ef7b75fcccb4dd)
Was only used to provide a list of input devices that XF86-Misc could use,
now that XF86-Misc is gone, was parsed and logged, then completely ignored.
(Depends on previous patch that introduces OBSOLETE_TOKEN in parser to
make obsolete keywords like InputDevices & RgbPath be non-fatal errors.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Xorg shouldn't refuse to run just because the user has an xorg.conf that
had the previously-used RgbPath keyword in it.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
When the crtc transformation changes, the entire crtc must be repainted.
This was being done by clearing the shadow and then painting the rectangle
containing the screen image; the clear being required as the screen image
may not fill the crtc. When changing the transform rapidly, this leads to
flashing. Eliminate the clear by painting the entire crtc instead of just
the screen rectangle.
Signed-off-by: Keith Packard <keithp@keithp.com>
This involved wrapping some GCOps to get the proper behavior
when using X11 raster ops mixed with OpenGL (see driWrap.c).
This extends the AppleDRI protocol with create and destroy pixmap
functions.
The dri.c code has been extended quite a bit to enable this, and
to initialize the wrapping of CreateGC for GCOps.
This has been tested with tests/glxpixmap and proven to work with
the new libGL. Existing applications seem to work fine too. Redraws
all appear to be correct.
There may be some bugs lurking that I haven't found yet. I plan
to drive them out by extending the libGL test suite.
(cherry picked from commit 630518766b01022c49fe3a9e7d501808f71b06e2)
a9d7d659.. (PCI: Remove pciBusAddrToHostAddr and associated nonsense)
removes pciBusAddrToHostAddr(), but not its prototype, resulting in:
./.libs/libxorg.a(sdksyms.o):(.data.rel+0xe64): undefined reference to
`pciBusAddrToHostAddr'
Signed-off-by: Chris Ball <cjb@laptop.org>
This was all a glorified no-op. We rely on pciaccess to create device
maps anyway, so we should have no reason to care about what the host
address is.
Acked-by: Ian Romanick <ian.d.romanick at intel.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
All you get for standard timing descriptors is horizontal size in
multiples of 8 pixels (which means you can't say 1366) and height in
terms of aspect ratio (which means you can't say 768). You'd like to
just fuzzy-match this by walking the DMT list for sufficiently close
modes, but you can't because DMT is useless and only defines a 1360x768
mode, because it's _also_ specified in terms of character cells despite
providing pixel exact timings. Neither can you use CVT or GTF to
generate the timings, because they _also_ believe that modes have to be
a multiple of 8 pixels.
You'd also hope you could find a timing definition for this in CEA, but
you can't because CEA only defines transmission formats that actually
exist. So there's 480p, 720p, and 1080p, but no 768p. And why would
there be, after all, the encoded signal is never 768p so obviously no
one would ever make a display in that format.
So instead, make a CVT mode since that's likely to be handled well by
just about everything, smash the horizontal active down by 2, and shift
the sync pulse by 1. Underscanning the hard way.
Pass the suicide.
Otherwise drivers have to refuse interlace twice: once in the output
config, and once in ->valid_mode() to catch output and config modes.
If you can't do interlaced modes, asking nicely for it in the config
isn't going to suddenly make it work.
By making the "Unable to open config file" header a warning, it was
not appearing with the filename when a config file was specified and
not found. Now we make it an error message again, but only issue
the error if a filename was specified - if none was specified, then
we don't even issue a warning, just the "Using autoconfig" info message.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
being exported correctly by Xplugin.
This should fix a bug with the surface for a window, when an export fails.
Before the export could fail and leave behind an invalid (freed) pointer in the dix privates.
I have an idea of how to fix the GLXPixmaps now without using CGLSetOffScreen.
This work is a step towards that. The Xplugin will need a small patch to fix an
issue that this change brought forth.
(cherry picked from commit 58c4116c47543b5e30c2232e7bee8efc0b9be176)
An update to the keyboard layout mapping table which updates some no longer valid keyboard layout names
(e.g. de_CH -> ch -variant de) and adds a few more reported layouts
Copyright (C) Colin Harrison 2005-2008
http://www.straightrunning.com/XmingNotes/http://sourceforge.net/projects/xming/
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Function 'winProcessXEventsTimeout()' is declared 'static Bool' and
defined 'static int' (correct) in 'winclipboardwndproc.c'. This has been
wrong since dot, but luckily was of no significance
Copyright (C) Colin Harrison 2005-2008
http://www.straightrunning.com/XmingNotes/http://sourceforge.net/projects/xming/
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The clipboard should only select PropertyChange events and do this on
the correct window, the messaging window for the clipboard not the root
window!
Copyright (C) Colin Harrison 2005-2008
http://www.straightrunning.com/XmingNotes/http://sourceforge.net/projects/xming/
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fix prototypes of winOverrideIcon(), winTaskbarIcon() and winOverrideDefaultIcon() to return HICON
Also use HICON type in WINPREFS stucture
Remove various casts these changes make unnecessary
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fix old-style definition warnings caused by definitions with empty
parameter lists "()", which should be "(void)" to indicate the function
takes no parameters, rather than unspecified parameters
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
With trying to match depths so that you didn't end up with a depth 24
fbconfig for the 32-bit composite visual, I broke the alpha bits on the depth
24 X visual, which angered other applications. But in fixing that, the
pickFBconfigs code for "minimal" also could end up breaking GLX visuals if
the same FBconfig was chosen for more than one X visual.
We have no reason to not expose as many visuals as possible, but the old
"all" mode didn't match any existing X visuals to GLX visuals, so normal
GL apps didn't work at all.
Instead, replace it with a simple combination of the two modes: Create GLX
visuals by picking unique FBconfigs with as many features as possible for
each X visual in order. Then, for all remaining FBconfigs that are
appropriate for display, add a corresponding X and GLX visual.
This gets all applications (even ones that aren't smart enough to do FBconfigs)
get all the options to get the visual configuration they want. The only
potential downside is that the composite ARGB visual is unique and gets a
nearly full-featured GLX visual (except that the root visual might have taken
the tastiest FBconfig), which means that a dumb compositing manager could
waste resources. Write compositing managers using FBconfigs instead, please.
This patch gets the shadow scanout buffer repainted on panning area changes.
It does not, however, track the mouse correctly.
Signed-off-by: Keith Packard <keithp@keithp.com>
When the shadow scanout buffer can be re-used, the underlying framebuffer
area must be damaged so that the scanout will be repainted. This patch
delays the addition of that damaged area until after the transform in the
crtc has been updated, otherwise the old transform would have been used and
the wrong area repainted.
Signed-off-by: Keith Packard <keithp@keithp.com>
generic.c:80: warning: ‘read_legacy_video_BIOS’ defined but not used
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86IsOptionSet is rarely the right function to use for boolean options because
it returns TRUE whenever the option is present, even if its value is "no",
"off", "0", etc.
Federico Mena Quintero
Jeremy Huddleston
Joe Krahn
Jon TURNEY
Colin Harrison
Matthieu Herrb
Adam Jackson
Peter Hutterer
Matthias Hopf
David Marx
Julien Cristau
Matt Turner
Michel Dänzer
Jerome Glisse
Alan Coopersmith
Jesse Barnes
Ian Romanick
Eamon Walsh
Joel Bosveld
David Jander
Samuel Thibault
Dave Airlie
Ander Conselvan de Oliveira
Eric Anholt
Jeremy Huddleston
Tormod Volden
Simon Thum
Winfried Grünewald
Tomas Carnecky
Topi Kanerva
Keith Packard
Adam Tkac
George Staplin
Chris Ball
David Nusinow
Aaron Plattner