The symbol controls whether to include dix-config.h, and it's always set,
thus we don't need it (and dozens of ifdef's) anymore.
This commit only removes them from our own source files, where we can
guarantee that dix-config.h is present - leaving the (potentially exported)
headers untouched.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
This header isn't public and holds defines for code in os/ directory,
so no need to keep it in the global header dir - it's probably better
off in os/ directory - just like we already have with many others.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1389>
Make sure we're not scanning out any fbs with fancy modifiers when
we try to light up new displays. This is already the case in cases
where the screen gets resized, but in cases where that doesn't happen
it might be possible for the modeset(s) to fail due to watermark/etc.
constraints imposed by the fancy modifiers. We can avoid that by
making sure everything gets unflipped before the modeset.
v2: make poll timeout infinite
s/in_modeset/pending_modeset/
deal with tearfree fallout (goto no_flip)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
When using TearFree, DRI clients have no way of accurately knowing when
their copied pixmaps appear on the display without utilizing the kernel
driver's notification indicating that the TearFree flip containing their
pixmap is complete. This is because the target CRTC's MSC can change while
the predicted completion MSC is calculated and even while the page flip
IOCTL is sent to the kernel due to scheduling delays and/or unfortunate
timing. Even worse, a page flip isn't actually guaranteed to be finished
after one vblank; it may be several MSCs until a flip actually finishes
depending on delays and load in hardware.
As a result, DRI clients may be off by one or more MSCs when they naively
expect their pixmaps to be visible at MSC+1 with TearFree enabled. This,
for example, makes it impossible for DRI clients to achieve precise A/V
synchronization when TearFree is enabled.
This change therefore adds a way for DRI clients to receive a notification
straight from the TearFree flip-done handler to know exactly when their
pixmaps appear on the display. This is done by checking for a NULL pixmap
pointer to modesetting's DRI flip routine, which indicates that the DRI
client has copied its pixmap and wants TearFree to send a notification when
the copied pixmap appears on the display as part of a TearFree flip. The
existing PageFlip scaffolding is reused to achieve this with minimal churn.
The Present extension will be updated in an upcoming change to utilize this
new mechanism for DRI clients' presentations.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
There is more than one place with the confusing TearFree state check for a
CRTC. Instead of open-coding the TearFree check everywhere, introduce a
helper, ms_tearfree_is_active_on_crtc, to cover the TearFree state checks.
Suggested-by: Martin Roukala <martin.roukala@mupuf.org>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
The event allocation for ms_do_pageflip is leaked on error because callers
of ms_do_pageflip have no way of knowing whether or not a page flip
succeeded for any CRTCs. If a page flip succeeded for at least one CRTC,
then it's not safe for the caller to free the event allocation, and the
allocation won't be leaked. The event allocation is only leaked when not a
single CRTC's page flip succeeded.
Since all callers of ms_do_pageflip allocate the event pointer, and all of
them intentionally leak the event allocation when ms_do_pageflip returns an
error, just free the event pointer inside ms_do_pageflip when a page flip
doesn't succeed for any CRTC.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
The CRTC pointer will soon be needed in the TearFree flip handlers, so pass
it in instead of passing in drmmode_tearfree_ptr.
No functional change.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Rather than passing the reference CRTC's vblank pipe to ms_do_pageflip,
just pass the pointer to the reference CRTC directly instead. This is
clearer and more useful than the vblank pipe, since the vblank pipe is only
used to identify whether or not a given CRTC is the reference CRTC.
No functional change.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This #ifdef is redundant since ms_do_pageflip is already enclosed within a
larger GLAMOR_HAS_GBM #ifdef.
No functional change.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This adds support for TearFree page flips to eliminate tearing without the
use of a compositor. It allocates two shadow buffers for each CRTC, a back
buffer and a front buffer, and uses damage tracking to minimize excessive
copying between buffers and skip unnecessary flips when the screen's
contents remain unchanged. It works on transformed screens too, such as
rotated and scaled CRTCs.
When PageFlip is enabled, TearFree won't force fullscreen DRI clients to
synchronize their page flips to the vblank interval.
TearFree is disabled by default.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
do_queue_flip_on_crtc() is about to be used to flip buffers other than the
primary scanout (`ms->drmmode.fb_id`), so make it generic to accept any
frame buffer ID, as well as x and y coordinates in the frame buffer, to
flip on a given CRTC. Move the retry logic from queue_flip_on_crtc() into
it as well, so that it's robust for all callers.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Whenever an unredirected fullscreen window uses pageflipping for a
DRI3/Present PresentPixmap() operation and the X-Screen has more than
one active output, multiple crtc's need to execute pageflips. Only
after the last flip has completed can the PresentPixmap operation
as a whole complete.
If a sync_flip is requested for the present, then the current
implementation will synchronize each pageflip to the vblank of
its associated crtc. This provides tear-free image presentation
across all outputs, but introduces a different artifact, if not
all outputs run at the same refresh rate with perfect synchrony:
The slowest output throttles the presentation rate, and present
completion is delayed to flip completion of the "latest" output
to complete. This means degraded performance, e.g., a dual-display
setup with a 144 Hz monitor and a 60 Hz monitor will always be
throttled to at most 60 fps. It also means non-constant present
rate if refresh cycles drift against each other, creating complex
"beat patterns", tremors, stutters and periodic slowdowns - quite
irritating!
Such a scenario will be especially annoying if one uses multiple
outputs in "mirror mode" aka "clone mode". One output will usually
be the "production output" with the highest quality and fastest
display attached, whereas a secondary mirror output just has a
cheaper display for monitoring attached. Users care about perfect
and perfectly timed tear-free presentation on the "production output",
but cares less about quality on the secondary "mirror output". They
are willing to trade quality on secondary outputs away in exchange
for better presentation timing on the "production output".
One example use case for such production + monitoring displays are
neuroscience / medical science applications where one high quality
display device is used to present visual animations to test subjects
or patients in a fMRI scanner room (production display), whereas
an operator monitors the same visual animations from a control room
on a lower quality display. Presentation timing needs to be perfect,
and animations high-speed and tear-free for the production display,
whereas quality and timing don't matter for the monitoring display.
This commit gives users the option to choose such a trade-off as
opt-in:
It adds a new boolean option "AsyncFlipSecondaries" to the device section
of xorg.conf. If this option is specified as true, then DRI3 pageflip
behaviour changes as follows:
1. The "reference crtc" for a windows PresentPixmap operation does a
vblank synced flip, or a DRM_MODE_PAGE_FLIP_ASYNC non-synchronized
flip, as requested by the caller, just as in the past. Typically
flips will be requested to be vblank synchronized for tear-free
presentation. The "reference crtc" is the one chosen by the caller
to drive presentation timing (as specified by PresentPixmap()'s
"target_msc", "divisor", "remainder" parameters and implemented by
vblank events) and to deliver Present completion timestamps (msc
and ust) extracted from its pageflip completion event.
2. All other crtc's, which also page-flip in a multi-display configuration,
will try to flip with DRM_MODE_PAGE_FLIP_ASYNC, ie. immediately and
not synchronized to vblank. This allows the PresentPixmap operation
to complete with little delay compared to a single-display present,
especially if the different crtc's run at different video refresh
rates or their refresh cycles are not perfectly synchronized, but
drift against each other. The downside is potential tearing artifacts
on all outputs apart from the one of the "reference crtc".
Successfully tested on a AMD gpu with single-display, dual-display and
triple-display setups, and with single-X-Screen as well as dual-X-Screen
"ZaphodHeads" configurations.
Please consider merging this commit for the upcoming server 1.21 branch.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
In certain circumstances we will have a lot of flip errors without a
reasonable way to prevent them. In such case we reduce the number of
logged messages to at least not fill the error logs.
The details are as follows:
At least on i915 hardware support for async page flip support depends on
the used modifiers which themselves can change dynamically for a screen.
This results in the following problems:
- We can't know about whether a particular CRTC will be able to do an
async flip without hardcoding the same logic as the kernel as there's no
interface to query this information.
- There is no way to give this information to an application, because
the protocol of the present extension does not specify anything about
changing of the capabilities on runtime or the need to re-query them.
Even if the above was solved, the only benefit would be avoiding a
roundtrip to the kernel and reduced amount of error logs. The former
does not seem to be a good enough benefit compared to the amount of work
that would need to be done. The latter is solved in this commit.
Reviewed-by: Eero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
A lot of that code is the same as in xf86-amdgpu and xf86-nouveau drivers. By removing that functions from
ms namespace we can move that code to common implementation.
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Now that we've fixed LoaderSymbolFromModule this should work properly.
This reverts commit 5c7c6d5cff.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Only log 1 error for consecutive flip failures, instead of filling the
log and the disk with errors for each attempted flip.
Despite our best efforts we may end up with a BO which gets refused
when we try to import it as a framebuffer, see e.g. :
https://bugs.freedesktop.org/show_bug.cgi?id=111306
This should not happen, but as the above bugs shows sometimes it does
and chances are it will happen again.
Note ideally we should check if the import is possible at
ms_present_check_flip time, like the amdgpu code is doing since:
https://gitlab.freedesktop.org/xorg/driver/xf86-video-amdgpu/merge_requests/35
but that requires a chunk of refactoring work on the modesetting driver,
so for now this will have to do.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Before this commit ms_do_pageflip logged a single error for both the
drmmode_bo_import failure path as well as for the queue_flip_on_crtc
path. This commit splits this into 2 separate error logs so that it is
clear what the cause of the flip-failure is.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently on present-flip failures we log 2 messages for each failure,
1 from ms_do_pageflip and then another one from ms_present_flip which
is the caller of ms_do_pageflip. This commit adds a log_prefix argument
to ms_do_pageflip so that its log messages can show if it is a DRI2 or
a Present flip which fails and removes the redundant error message from
ms_present_flip.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CRTCs and outputs needs to be enabled/disabled when the current
DPMS mode is changed. We also try to do it in an atomic commit
when possible.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Otherwise the same content is shown on all outputs.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.comM>
With earlier commit the required version was bumped to 2.4.89, thus the
guards always evaluate to true.
Fixes: e4e3447603 ("Add RandR leases with modesetting driver support
[v6]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
To make sure we also use the same primary plane and to avoid
mixing uses of two APIs, it is better to always use the atomic
modesetting API when possible.
v2: Don't use mode_output->connector_id
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allows the uses of CCS compressed or tiled pixmaps as BOs when
page-flipping.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In order to flip between compressed and uncompressed buffers -
something drmModePageFlip explicitly bans us from doing - we need
to port use the atomic modesetting API. It's only 'fake' atomic
though given we still commit for each CRTC separately and
CRTC and connector properties are not set with the atomic API.
The helper functions to retrieve DRM properties have been borrowed
from Weston.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The glamor_egl module that the GLAMOR paths are using is only built if
GLAMOR_HAS_GBM is true, and there's no plan for implementing the
module without GBM. Simplify modesetting's code as a result.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Move ms_flush_drm_events out of GLAMOR ifdef.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97586
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The common page flip handle framework can be shared with DRI2
page flip.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Enrico Weigelt, metux IT consult
Peter Hutterer
Ville Syrjälä
Sultan Alsawaf
Mario Kleiner
Povilas Kanapickas
Łukasz Spintzyk
Alan Coopersmith
Adam Jackson
Michel Dänzer
Hans de Goede
Louis-Francis Ratté-Boulianne
Olivier Fourdan
Emil Velikov
Eric Anholt
Qiang Yu