The "sync crtc" is the crtc used to drive the display timing of a
drawable under DRI2 and DRI3/Present. If a drawable intersects
multiple video outputs, then normally the crtc is chosen which has
the largest intersection area with the drawable.
If multiple outputs / crtc's have exacty the same intersection
area then the crtc chosen was simply the first one with maximum
intersection. Iow. the choice was random, depending on plugging
order of displays.
This adds the ability to choose a preferred output in such a tie
situation. The RandR output marked as "primary output" is chosen
on such a tie.
This new behaviour and its implementation is consistent with other
video ddx drivers. See amdgpu-ddx, ati-ddx and nouveau-ddx for
reference. This commit is a straightforward port from amdgpu-ddx.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
In a setup with both VRR capable and non-VRR capable displays,
it was so far inconsistent if the driver would allow use of
VRR support or not, as "is_connector_vrr_capable" was set to
whatever the capabilities of the last added drm output were.
Iow. the plugging order of monitors determined the outcome.
Fix this: Now if at least one display is VRR capable, the driver
will treat an X-Screen as capable for VRR, plugging order no
longer matters.
Tested with a dual-display setup with one VRR monitor and one
non-VRR monitor. This is also beneficial with the new Option
"AsyncFlipSecondaries".
When we are at it, also add some so far missing description of
the "VariableRefresh" driver option, copied from amdgpu-ddx.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
A lut size of 4096 slots has been verified to work correctly,
as tested with amdgpu-kms. Intel Tigerlake Gen12 hw has a very
large GAMMA_LUT size of 262145 slots, but also issues with its
current GAMMA_LUT implementation, as of Linux 5.14.
Therefore we keep GAMMA_LUT off for large lut's. This currently
excludes Intel Icelake, Tigerlake and later.
This can be overriden via the "UseGammaLUT" boolean xorg.conf option
to force use of GAMMA_LUT on or off.
See following link for the Tigerlake situation:
https://gitlab.freedesktop.org/drm/intel/-/issues/3916#note_1085315
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
This reverts commit 617f591fc4.
The problem described in that commit exists, but the two
preceeding commits with improvements to the servers RandR
code should avoid the mentioned problems while allowing the
use of GAMMA_LUT's instead of legacy gamma lut.
Use of legacy gamma lut's is not a good fix, because it will reduce
color output precision of gpu's with more than 1024 GAMMA_LUT
slots, e.g., AMD, ARM MALI and KOMEDA with 4096 slot luts,
and some Mediathek parts with 512 slot luts. On KOMEDA, legacy
lut's are completely unsupported by the kms driver, so gamma
correction gets disabled.
The situation is especially bad on Intel Icelake and later:
Use of legacy gamma tables will cause the kms driver to switch
to hardware legacy lut's with 256 slots, 8 bit wide, without
interpolation. This way color output precision is restricted to
8 bpc and any deep color / HDR output (10 bpc, fp16, fixed point 16)
becomes impossible. The latest Intel gen gpu's would have worse
color precision than parts which are more than 10 years old.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Rotation is broken for all drm drivers not providing hardware rotation
support. Drivers that give direct access to vram and not needing dirty
updates still work but only by accident. The problem is caused by
modesetting not sending the correct fb_id to drmModeDirtyFB() and
passing the damage rects in the rotated state and not as the crtc
expects them. This patch takes care of both problems.
Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de>
GAMMA_LUT sizes other than 1024 cause a crash during startup if the memcpy()
calls in xf86RandR12CrtcSetGamma() read past the end of the legacy X11 /
XVidMode gamma ramp.
This is a problem on Intel ICL / GEN11 platforms because they report a GAMMA_LUT
size of 262145. Since it's not clear that the modesetting driver will generate a
proper gamma ramp at that size even if xf86RandR12CrtcSetGamma() is fixed, just
disable use of GAMMA_LUT for sizes other than 1024 for now. This will cause the
modesetting driver to disable the CTM property and fall back to the legacy gamma
LUT.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1193
Tested-by: Mark Herbert
Whenever an unredirected fullscreen window uses pageflipping for a
DRI3/Present PresentPixmap() operation and the X-Screen has more than
one active output, multiple crtc's need to execute pageflips. Only
after the last flip has completed can the PresentPixmap operation
as a whole complete.
If a sync_flip is requested for the present, then the current
implementation will synchronize each pageflip to the vblank of
its associated crtc. This provides tear-free image presentation
across all outputs, but introduces a different artifact, if not
all outputs run at the same refresh rate with perfect synchrony:
The slowest output throttles the presentation rate, and present
completion is delayed to flip completion of the "latest" output
to complete. This means degraded performance, e.g., a dual-display
setup with a 144 Hz monitor and a 60 Hz monitor will always be
throttled to at most 60 fps. It also means non-constant present
rate if refresh cycles drift against each other, creating complex
"beat patterns", tremors, stutters and periodic slowdowns - quite
irritating!
Such a scenario will be especially annoying if one uses multiple
outputs in "mirror mode" aka "clone mode". One output will usually
be the "production output" with the highest quality and fastest
display attached, whereas a secondary mirror output just has a
cheaper display for monitoring attached. Users care about perfect
and perfectly timed tear-free presentation on the "production output",
but cares less about quality on the secondary "mirror output". They
are willing to trade quality on secondary outputs away in exchange
for better presentation timing on the "production output".
One example use case for such production + monitoring displays are
neuroscience / medical science applications where one high quality
display device is used to present visual animations to test subjects
or patients in a fMRI scanner room (production display), whereas
an operator monitors the same visual animations from a control room
on a lower quality display. Presentation timing needs to be perfect,
and animations high-speed and tear-free for the production display,
whereas quality and timing don't matter for the monitoring display.
This commit gives users the option to choose such a trade-off as
opt-in:
It adds a new boolean option "AsyncFlipSecondaries" to the device section
of xorg.conf. If this option is specified as true, then DRI3 pageflip
behaviour changes as follows:
1. The "reference crtc" for a windows PresentPixmap operation does a
vblank synced flip, or a DRM_MODE_PAGE_FLIP_ASYNC non-synchronized
flip, as requested by the caller, just as in the past. Typically
flips will be requested to be vblank synchronized for tear-free
presentation. The "reference crtc" is the one chosen by the caller
to drive presentation timing (as specified by PresentPixmap()'s
"target_msc", "divisor", "remainder" parameters and implemented by
vblank events) and to deliver Present completion timestamps (msc
and ust) extracted from its pageflip completion event.
2. All other crtc's, which also page-flip in a multi-display configuration,
will try to flip with DRM_MODE_PAGE_FLIP_ASYNC, ie. immediately and
not synchronized to vblank. This allows the PresentPixmap operation
to complete with little delay compared to a single-display present,
especially if the different crtc's run at different video refresh
rates or their refresh cycles are not perfectly synchronized, but
drift against each other. The downside is potential tearing artifacts
on all outputs apart from the one of the "reference crtc".
Successfully tested on a AMD gpu with single-display, dual-display and
triple-display setups, and with single-X-Screen as well as dual-X-Screen
"ZaphodHeads" configurations.
Please consider merging this commit for the upcoming server 1.21 branch.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
When using DRI3+Present with PRIME render offload, sometimes there is
a mismatch between the stride of the to-be-presented Pixmap and the
frontbuffer. The current code would reject a pageflip present in this
case if atomic modesetting is not enabled, ie. always, as atomic
modesetting is disabled by default due to brokeness in the current
modesetting-ddx.
Fullscreen presents without page flipping however trigger the copy
path as fallback, which causes not only unreliable presentation timing
and degraded performance, but also massive tearing artifacts due to
rendering to the framebuffer without any hardware sync to vblank.
Tearing is extra awful on modesetting-ddx because glamor afaics seems
to use drawing of a textured triangle strip for the copy implementation,
not a dedicated blitter engine. The rasterization pattern creates extra
awful tearing artifacts.
We can do better: According to a tip from Michel Daenzer (thanks!),
at least atomic modesetting capable kms drivers should be able to
reliably change scanout stride during a pageflip, even if atomic
modesetting is not actually enabled for the modesetting client.
This commit adds detection logic to find out if the underlying kms
driver is atomic_modeset_capable, and if so, it no longer rejects
page flip presents on mismatched stride between new Pixmap and
frontbuffer.
We (ab)use a call to drmSetClientCap(ms->fd, DRM_CLIENT_CAP_ATOMIC, 0);
for this purpose. The call itself has no practical effect, as it
requests disabling atomic mode, although atomic mode is disabled by
default. However, the return value of drmSetClientCap() tells us if the
underlying kms driver is atomic modesetting capable: An atomic driver
will return 0 for success. A legacy non-atomic driver will return a
non-zero error code, either -EINVAL for early atomic Linux versions
4.0 - 4.19 (or for non-atomic Linux 3.x and earlier), or -EOPNOTSUPP
for Linux 4.20 and later.
Testing on a MacBookPro 2017 with Intel Kabylake display server gpu +
AMD Polaris11 as prime renderoffload gpu, X-Server master + Mesa 21.0.3
show improvement from unbearable tearing to perfect, despite a stride
mismatch between display gpu and Pixmap of 11776 Bytes vs. 11520
Bytes. That this is correct behaviour was also confirmed by comparing the
behaviour and .check_flip implementation of the patched modesetting-ddx
against the current intel-ddx SNA Present implementation.
Please consider merging this patch before the server-1.21 branch point.
This patch could also be cherry-picked into the server 1.20 branch to
fix the same limitation.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
A misplaced error check can cause this failure scenario, and does
so reliably as tested on Ubuntu 21.04 with KDE Plasma 5 desktop
within the first few seconds of login session startup, rendering
VRR under modesetting-ddx unusable:
1. Some X11 client application changes some window property.
2. ms_change_property() is called as part of the property change
handling call chain (client->requestVector[X_ChangeProperty]).
It removes itself temporarily from the call chain - or so it
thinks, hooking up saved_change_property instead.
3. ret = saved_change_property(client) is called and fails
temporarily for some non-critical reason.
4. The misplaced error check returns early (error abort), without
first restoring ms_change_property() as initial X_ChangeProperty
handler in the call chain again.
-> Now ms_change_property() has removed itself permanently from the
property handler call chain for the remainder of the X session
and VRR property changes on windows are no longer handled, ie.
VRR no longer gets enabled/disabled in response to window VRR
property changes.
Place the error check at the proper place, just as it is correctly
done by amdgpu-ddx, and in modesetting-ddx ms_delete_property()
function.
Verified to fix VRR handling with an AMD gpu under KDE desktop
session.
Please consider merging before branching the server 1.21 branch.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
In certain circumstances we will have a lot of flip errors without a
reasonable way to prevent them. In such case we reduce the number of
logged messages to at least not fill the error logs.
The details are as follows:
At least on i915 hardware support for async page flip support depends on
the used modifiers which themselves can change dynamically for a screen.
This results in the following problems:
- We can't know about whether a particular CRTC will be able to do an
async flip without hardcoding the same logic as the kernel as there's no
interface to query this information.
- There is no way to give this information to an application, because
the protocol of the present extension does not specify anything about
changing of the capabilities on runtime or the need to re-query them.
Even if the above was solved, the only benefit would be avoiding a
roundtrip to the kernel and reduced amount of error logs. The former
does not seem to be a good enough benefit compared to the amount of work
that would need to be done. The latter is solved in this commit.
Reviewed-by: Eero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
This mode for displays running on evdi/udl as side effect of failed glamor_egl_init
reverse_prime_offload_mode was initialized to FALSE
After Mesa upgrade to 21.0.0 GL_RENDERER is not llvmpipe that results in successful glamor_egl_init
and reverse_prime_offload_mode enabled.
This commit is explicitly disabling reverse_prime_offload_mode for evdi and udl drivers
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
A lot of that code is the same as in xf86-amdgpu and xf86-nouveau drivers. By removing that functions from
ms namespace we can move that code to common implementation.
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Rather than trying to create a gamma ramp array of the appropriate size in
drmmode_crtc_init when the GAMMA_LUT property should be used, just flag the crtc
as wanting to use the GAMMA_LUT property and then replace the gamma ramp later,
right before calling xf86HandleColormaps. This avoids a problem during initial
startup where xf86RandR12CreateObjects12 hard-codes a gamma ramp size of 256,
causing xf86RandR12CrtcSetGamma to read past the end of the DIX layer's RandR
gamma ramp array:
PreInit
drmmode_pre_init
drmmode_crtc_init
crtc->gamma_size = 1024
ScreenInit
xf86CrtcScreenInit
xf86RandR12Init
xf86RandR12Init12
xf86RandR12CreateObjects12
RRCrtcCreate
randr_crtc->gammaSize = 0
xf86RandR12InitGamma(pScrn, 256)
RRCrtcGammaSetSize
randr_crtc->gammaSize = 256
xf86RandR12InitGamma
xf86RandR12CrtcInitGamma
RRCrtcGammaSet
xf86RandR12CrtcSetGamma
// crtc->gamma_size is 1024 here, while randr_crtc->gammaRed
// is a 256-element array.
memcpy(crtc->gamma_red, randr_crtc->gammaRed, crtc->gamma_size * sizeof(crtc->gamma_red[0]));
drmmode_setup_colormap
xf86HandleColormaps
xf86RandR12InitGamma
RRCrtcGammaSetSize
randr_crtc->gammaSize = 1024
Fixes: 245b9db0 - modesetting: Use GAMMA_LUT when available
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1126
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
By default, the macro DebugPresent() is a no-op but it can be enabled
at build time for debugging purpose.
However, doing so prevents the code to build because one debug statement
tries to make use of a non-existent variable:
present.c: In function ‘ms_present_queue_vblank’:
present.c:147:18: error: ‘vbl’ undeclared (first use in this function)
147 | vbl.request.sequence));
| ^~~
present.c:49:32: note: in definition of macro ‘DebugPresent’
49 | #define DebugPresent(x) ErrorF x
| ^
Fix the build with DebugPresent() by removing the vbl variable from the
debug message.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
When the "CTM" (color transform matrix) modesetting property is available,
create a corresponding RandR property.
To match the format of the property available in the amdgpu driver, expose it as
an array of 18 32-bit XA_INTEGERs representing a 3x3 matrix in row-major order,
where each entry is a S31.32 sign-magnitude fixed-point number with the
fractional part listed first.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
If the kernel exposes GAMMA_LUT and GAMMA_LUT_SIZE properties and the size is
not what the server has pre-configured for the crtc, free the old gamma ramp
memory allocated by the server and replace it with new allocations of the
appropriate size.
In addition, when GAMMA_LUT is available, use drmModeCreatePropertyBlob() and
drmModeObjectSetProperty() to set the gamma ramp rather than using the legacy
drmModeCrtcSetGamma() function.
Add a new option "UseGammaLUT" to allow disabling this new behavior and falling
back to drmModeCrtcSetGamma() unconditionally.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Modeset properties can be set even when ms->atomic_modeset is disabled by using
the drmModeObjectSetProperty() function.
This will be necessary in a later change in order to set the GAMMA_LUT and CTM
properties.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
There was a time when setting a mode on a CRTC would not depend on the
associated connector's state. If a mode had been set successfully once,
it would mean it would work later on.
This changed with the introduction of new connectors type that now
require a link training sequence (DP, HDMI 2.0), and that means that
some events may have happened while the X server was not master that
would then prevent the mode from successfully be restored to its
previous state.
This patch relaxes the requirement that all modes should be restored on
EnterVT, or the entire X-Server would go down by allowing modesets to
fail (with some warnings). If a modeset fails, the CRTC will be
disabled, and a RandR event will be sent for the desktop environment to
fix the situation as well as possible.
Additional patches might be needed to make sure that the user would
never be left with all screens black in some scenarios.
v2 (Martin Peres):
- whitespace fixes
- remove the uevent handling (it is done in a previous patch)
- improve the commit message
- reduce the size of the patch by not changing lines needlessly
- return FALSE if one modeset fails in ignore mode
- add comments/todos to explain why we do things
- disable the CRTCs that failed the modeset
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Closes: #1010
Normally, we would receive a uevent coming from Linux's DRM subsystem,
which would trigger the check for disappearing/appearing resources.
However, this event is not received when X is not master (another VT
is selected), and so the userspace / desktop environment would not be
notified about the changes that happened while X wasn't master.
To fix the issue, this patch forces a refresh on EnterVT by splitting
the kms-checking code from the uevent handling into its own (exported)
function called drmmode_update_kms_state. This function is then called
from both the uevent-handling function, and on EnterVT right before
restoring the modes.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Fetch VariableRefresh option value from X conf file for
modesetting backend DDX driver. This option defaults to false,
and must be set to "true" in conf file for variable refresh
support in the DDX driver.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
Window wrappers gets the notification when the window
properties changes. These wrappers are mainly used to
keep track of per-window _VARIABLE_REFRESH property values.
These changes have been ported from AMDGPU
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
These changes have been ported from AMD GPU DDX driver.
This patch adds support for setting the CRTC variable refresh property
for suitable windows flipping via the Present extension.
In order for a window to be suitable for variable refresh it must have
the _VARIABLE_REFRESH property set by the MESA and inform Modesetting
DDX driver with window property updates.
Then the window must pass the checks required to be suitable for
Present extension flips - it must cover the entire X screen and no
other window may already be flipping. And also DRM connector should
be VRR capable.
With these conditions met every CRTC for the X screen will have their
variable refresh property set to true.
Kernel Changes to support this feature in I915 driver is under development.
Tested with DOTA2, Xonotic and custom GLX apps.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Since the introduction of "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize" the fb_id isn't initialited at
drmmode_xf86crtc_resize.
Rotate operation of XRandR uses rotate_bo. So in this case the fb_id
associated to the front_bo is not initialized at drmmode_set_mode_major.
So fd_id remains 0.
As every call to drmmode_xf86crtc_resize allocates a new front_bo we should
destroy unconditionally the old_front_bo if operation success. So we free
the allocated GBM handles.
This avoids crashing xserver with a OOM in the RPI4 1Gb at 4k resolution
after 3 series xrandr rotations from normal to left and vice versa reported at
https://github.com/raspberrypi/firmware/issues/1345
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1024
Fixes: 8774532121 "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize"
EDID1.4 replaced GTF Bit with Continuous or Non-Continuous Frequency Display.
Check the "Display Range Limits Descriptor" for GTF support.
If panel doesn't support GTF, then add gtf modes.
Otherwise X will only show the modes in "Detailed Timing Descriptor".
V2: Coding style changes.
V3: Coding style changes, remove unused variate.
V4: remove unused variate.
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/313
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Resulted in a build failure with -Werror:
../hw/xfree86/drivers/modesetting/drmmode_display.c: In function ‘drmmode_crtc_set_mode’:
../hw/xfree86/drivers/modesetting/drmmode_display.c:759:15: error: unused variable ‘screen’ [-Werror=unused-variable]
759 | ScreenPtr screen = crtc->scrn->pScreen;
| ^~~~~~
Fixes: c66c548eab "modesetting: Call glamor_finish from
drmmode_crtc_set_mode"
Reviewed-by: Adam Jackson <ajax@redhat.com>
I introduced this error with the MST hotplug code, but it can trigger
on zaphod setups, and is perfectly fine. There is no support for
MST/hotplug on zaphod setups currently, so we can just skip over
the dynamic connector handling here. However we shouldn't skip
over the lease handling so move it into the codepath.
Fixes: 9257b1252d ("modesetting: add dynamic connector hotplug support (MST) (v3)")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For the miClearDrawable prototype. Apparently it doesn't get pulled in
for some build configurations, breaking the build.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Calling rrGetScrPriv when RandR isn't initialized causes an assertion
failure that aborts the server:
Xorg: ../include/privates.h:121: dixGetPrivateAddr: Assertion `key->initialized' failed.
Thread 1 "Xorg" received signal SIGABRT, Aborted.
0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
(gdb) bt
#0 0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
#1 0x00007ffff7892897 in abort () from /usr/lib/libc.so.6
#2 0x00007ffff7892767 in __assert_fail_base.cold () from /usr/lib/libc.so.6
#3 0x00007ffff78a1526 in __assert_fail () from /usr/lib/libc.so.6
#4 0x00007ffff7fb57c1 in dixGetPrivateAddr (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:121
#5 0x00007ffff7fb5822 in dixGetPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:136
#6 0x00007ffff7fb586a in dixLookupPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:166
#7 0x00007ffff7fb8445 in CreateScreenResources (pScreen=0x555555ab1790) at ../hw/xfree86/drivers/modesetting/driver.c:1335
#8 0x000055555576c5e4 in xf86CrtcCreateScreenResources (screen=0x555555ab1790) at ../hw/xfree86/modes/xf86Crtc.c:744
#9 0x00005555555d8bb6 in dix_main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/main.c:214
#10 0x00005555557a4f0b in main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/stubmain.c:34
This can happen, for example, if the server is configured with Xinerama
and there is more than one X screen:
Section "ServerLayout"
Identifier "crash"
Screen 0 "modesetting"
Screen 1 "dummy" RightOf "modesetting"
Option "Xinerama"
EndSection
Section "Device"
Identifier "modesetting"
Driver "modesetting"
EndSection
Section "Screen"
Identifier "modesetting"
Device "modesetting"
EndSection
Section "Device"
Identifier "dummy"
Driver "dummy"
EndSection
Section "Screen"
Identifier "dummy"
Device "dummy"
EndSection
The problem does not reproduce if there is only one X screen because of
this code in xf86RandR12Init:
#ifdef PANORAMIX
/* XXX disable RandR when using Xinerama */
if (!noPanoramiXExtension) {
if (xf86NumScreens == 1)
noPanoramiXExtension = TRUE;
else
return TRUE;
}
#endif
Fix the problem by checking dixPrivateKeyRegistered(rrPrivKey) before
calling rrGetScrPriv. This is similar to what the xf86-video-amdgpu
driver does:
fd66f5c0be/src/amdgpu_kms.c (L388)
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit cb1b1e184 modified msSharePixmapBacking() to derive modesettingPtr from
the 'screen' argument. Unfortunately, the name of the argument is misleading --
the screen is the slave screen. If the master is modesetting,
and the slave is not modesetting, it will segfault.
To fix the problem, this change derives modesettingPtr from
ppix->drawable.pScreen. This method is already used when calling
ms->glamor.shareable_fd_from_pixmap() later in the function.
To avoid future issues, this change also renames the 'screen' argument to
'slave'.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
New now ask Glamor to use EGL_MESA_query_driver to obtain the DRI driver
name; if successful, we use that as the DRI driver name. Following the
existing dri2.c logic, we also use the same name for the VDPAU driver,
except for i965 (and now iris), where we switch to the "va_gl" fallback.
This allows us to bypass the PCI ID lists in xserver and centralize the
driver selection mechanism inside Mesa. The hope is that we no longer
have to update these lists for any future hardware.
This makes sure any pending drawing to a new scanout buffer will be
visible from the start.
This makes the finish call in drmmode_copy_fb superfluous, so remove it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Now that we've fixed LoaderSymbolFromModule this should work properly.
This reverts commit 5c7c6d5cff.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
ms_present_get_crtc() returns an RRCrtcPtr, but derives it from a xf86CrtcPtr
found via ms_dri2_crtc_covering_drawable()=>ms_covering_crtc(). As a result, it
depends on all associated DIX ScreenRecs having an xf86CrtcConfigPtr DDX
private.
Some DIX ScreenRecs don't have an xf86CrtcConfigPtr DDX private, but do have an
rrScrPrivPtr DDX private. Given that we can derive all of the information we
need from RandR, we can support these screens by avoiding the use of xf86Crtc.
This change implements an RandR-based path for ms_present_get_crtc(), allowing
drawables to successfully fall back to syncing to the primary output, even if
the slave doesn't have an xf86CrtcConfigPtr DDX private.
Without this change, if a slave doesn't have an xf86CrtcConfigPtr DDX private,
drawables will fall back to 1 FPS if they overlap an output on that slave.
Signed-off-by: Alex Goins <agoins@nvidia.com>
DIX ScreenRecs don't necessarily have an xf86CrtcConfigPtr DDX private.
ms_covering_crtc() assumes that they do, which can result in a segfault.
Update ms_covering_crtc() to check the XF86_CRTC_CONFIG_PTR() returned pointer
before dereferencing it. This will still mean that ms_covering_crtc() can't fall
back to the primary output when a drawable overlaps a slave output (going to the
1 FPS default instead), but it won't segfault.
Signed-off-by: Alex Goins <agoins@nvidia.com>
ms_covering_crtc() uses RRFirstOutput() to determine a primary output to fall
back to if a drawable is overlapping a slave output.
If the primary output is a slave output, RRFirstOutput() will return a slave
output even if passed a master ScreenPtr. ms_covering_crtc() dereferences the
output's devPrivate, which is invalid for non-modesetting outputs, and can
crash.
Changing RRFirstOutput() could have unintended side effects for other callers,
so this change replaces the call to RRFirstOutput() with ms_first_output().
ms_first_output() ignores the primary output if it doesn't match the given
ScreenPtr, choosing the first connected output instead.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Populate outout possible_crtcs as the union of possible_crtcs from
the encoders rather than the intersection. Otherwise we're easily left
with possible_crtcs==0 when all the possible encoders have
non-overlapping possible_crtcs.
No idea what the magic 0x7f is about, but keep it around in case
it matters.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Currently we parse through xf86Info.debug to check if we the modifiers
should be disabled. Handle that within DDX and pass GLAMOR_NO_MODIFIERS
into the glamor_init() flags.
This allows individual DDX control over the setting - say when modifiers
are woking OK with one implementation and not the other.
Most importantly, this removes the final xf86 piece from the codebase.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Move from the xf86 specific ScrnInfoRec::privates, to the dix private
handling. Since there's no FreeScreen function in ScreenPtr, fold the
former within the existing CloseScreen.
Users, such as modesetting are updated, and out of tree drivers will
need equivalent, yet trivial, patch.
Note: we need to ensure that the screen private is unset and the screen
callbacks are restored in our CloseScreen function.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The autoconf build for the modesetting driver still relied on
xorg-macros.m4 for string replacements and did not include the
top-level manpages.am. As a result, no substitutions took place after
commit 2e497bf887.
This should be a candidate for the 1.20 branch.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This might be an error or not, for example refusing to work on llvmpipe
is normal and expected. glamor_egl_init() will print X_ERROR messages if
appropriate, so we don't need to here.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The atomic driver has issues with modesetting when stealing
connectors from a different crtc, a black screen when doing rotation
on a different crtc, and in general is just a mapping of the legacy
helpers to atomic. This is already done in the kernel, so just
fallback to legacy by default until this is fixed.
Please backport to 1.20, as we don't want to enable it for everyone
there. It breaks for existing users.
The fixes to make the xserver more atomic have been pending on the
mailing list for ages.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110375
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110030
References: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/36/commits
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Dynamically added outputs should have their properties
properly updated as well. Otherwise we're left with an output
with many of its propeties not exposed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Only log 1 error for consecutive flip failures, instead of filling the
log and the disk with errors for each attempted flip.
Despite our best efforts we may end up with a BO which gets refused
when we try to import it as a framebuffer, see e.g. :
https://bugs.freedesktop.org/show_bug.cgi?id=111306
This should not happen, but as the above bugs shows sometimes it does
and chances are it will happen again.
Note ideally we should check if the import is possible at
ms_present_check_flip time, like the amdgpu code is doing since:
https://gitlab.freedesktop.org/xorg/driver/xf86-video-amdgpu/merge_requests/35
but that requires a chunk of refactoring work on the modesetting driver,
so for now this will have to do.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Before this commit ms_do_pageflip logged a single error for both the
drmmode_bo_import failure path as well as for the queue_flip_on_crtc
path. This commit splits this into 2 separate error logs so that it is
clear what the cause of the flip-failure is.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently on present-flip failures we log 2 messages for each failure,
1 from ms_do_pageflip and then another one from ms_present_flip which
is the caller of ms_do_pageflip. This commit adds a log_prefix argument
to ms_do_pageflip so that its log messages can show if it is a DRI2 or
a Present flip which fails and removes the redundant error message from
ms_present_flip.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The miPointerSpriteFunc swcursor code expects there to only be a single
framebuffer and when the cursor moves it will undo the damage of the
previous draw, potentially overwriting what ever is there in a new
framebuffer installed after a flip.
This leads to all kind of artifacts, so we need to disable pageflipping
when a swcursor is used.
The code for this has shamelessly been copied from the xf86-video-amdgpu
code.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/issues/828
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix the following compiler warning:
drmmode_display.c: In function ‘drmmode_create_bo’:
drmmode_display.c:1019:9: warning: ISO C90 forbids mixed declarations and code [
1019 | uint32_t num_modifiers;
| ^~~~~~~~
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When the pixmapPrivateKeyRec was moved from a global to being embedded
inside the drmmode_rec these 2 where missed, clean them up.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Noticed when porting this logic to xf86-video-nouveau, and valgrind
complained about conditional jump based on uninitialized data.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Believe it or not, somehow we've never done this in legacy mode! We
currently simply change the DPMS property on the CRTC's output's
respective DRM connector, but this means that we're just setting the
CRTC as inactive-not disabled. From the perspective of the kernel, this
means that any shared resources used by the CRTC are still in use.
This can cause problems for drivers that are not yet fully atomic,
despite using the atomic helpers internally. For instance: if CRTC-1 and
CRTC-2 are still enabled and use shared resources within the kernel (an
MST topology, for example), and then userspace tries to go enable CRTC-3
on the same topology this might suddenly fail if CRTC-3 needs the shared
resources CRTC-1 and CRTC-2 are using. While I don't know of any
situations in the mainline kernel that actually trigger this, future
plans for reworking the atomic check of MST drivers are absolutely
going to make this into a real issue (they already are in my WIP
branches for the kernel).
So: actually do the right thing here and disable CRTCs when they're not
going to be used anymore, even in legacy mode.
Signed-off-by: Lyude Paul <lyude@redhat.com>
The X will be crashed on the system with other DDX driver,
such as amdgpu.
show the log like:
randr: falling back to unsynchronized pixmap sharing
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4e)
(EE) 1: /usr/lib/xorg/Xorg (0x55cb0151a000+0x1b5ce9)
(EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f1587a1d000+0x11390)
(EE)
(EE) Segmentation fault at address 0x0
(EE)
The issue is that modesetting as the master, and amdgpu as the slave.
Thus, when the master attempts to access pSlavePixPriv in ms_dirty_update(),
problems result due to the fact that it's accessing AMD's 'ppriv' using the
modesetting structure definition.
Apart from fixing crash issue, the patch fix other issue in master interface
in which driver should refer to master pixmap.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Goins <agoins@nvidia.com>
Instead of having every video driver loop over any pending leases to
free them during CloseScreen, do this up in the DIX layer by
terminating leases when a leased CRTC or Output is destroyed and
(just to make sure), also terminating leases in RRCloseScreen. The
latter should "never" get invoked as any lease should be associated
with a resource which was destroyed.
This is required as by the time the driver's CloseScreen function is
invoked, we've already freed all of the DIX randr structures and no
longer have any way to reference the leases
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
Cc: Thomas Hellstrom <thellstrom@vmware.com>
The recent rewrite of modesetting driver broke the 24bpp support.
As typically found on cirrus KMS, it leads to a blank screen, spewing
the error like:
failed to add fb -22
(EE) modeset(0): failed to set mode: Invalid argument
The culript is that the wrong bpp value of the front buffer is passed
to drmModeAddFB(). Fix it by replacing with the back buffer bpp,
drmmode->kbpp.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Dirsch <sndirsch@suse.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When setting DefaultDepth to 16 in the Screen section, the current
code requests a 32 bpp framebuffer, however the X-Server seems to
assumes 16 bpp.
Fixes commit 21217d0216 ("modesetting: Implement 32->24 bpp
conversion in shadow update")
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
If we're using atomic modesetting, then we're also using universal
planes, and so the lease we create needs to include the plane.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We don't want universal_planes unless we're using atomic APIs for
modesetting, and the kernel already enables universal_planes
automatically when atomic is enabled.
If we enable universal_planes when we're not using atomic, then we
won't have selected a plane for each crtc, and this will break lease
creation which requires planes for each output when universal_planes
is enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This lets an application open a suitable DRM device and pass the file
descriptor to the mode setting driver through an X server command line
option, '-masterfd'.
There's a companion application, xlease, which creates a DRM master by
leasing an output from another X server. That is available at
git clone git://people.freedesktop.org/~keithp/xlease
v2:
Always print usage, but note that it can't be used if
setuid/gid
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
So, this did actually work on older kernels at one point in time,
however it seems that this working was a result of some of the Linux
kernel's atomic modesetting helpers not preserving the CRTC's enabled
state in the right spots. This was fixed in:
846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2")
As a result, atomic commits which simply disassociate a DRM connector
with it's CRTC while leaving the CRTC in an enabled state aren't enough
to disable the CRTC, and result in the atomic commit failing. This
currently can cause issues with MST hotplugging where X will end up
failing to disable the MST outputs after they've left the system. A
simple reproducer:
- Start up Xorg
- Connect an MST hub with displays connected to it
- Remove the hub
- Now there should be CRTCs stuck on the orphaned MST connectors, and X
won't be able to reclaim them.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
drmmode_shadow_allocate() still uses drmModeAddFB() which may fail if
the format is not as expected, preventing from using a rotated output.
Change it to use the new function drmmode_bo_import() which takes care
of calling the drmModeAddFB2() API.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106715
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Tomas Pelka <tpelka@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
We don't want DRM file descriptors to leak to child processes.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Modifiers support needs gbm as a dependency. Without setting the dependency
included headers are not found reliably and the build might fail if the
headers are not placed in the default system include paths.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The old 32-Bit wraparound handling didn't actually work, due to some
integer casting bug, and the mapping was ill equipped to deal with input
from the new true 64-bit GetCrtcSequence/QueueCrtcSequence api's
introduced in Linux 4.15.
For 32-Bit truncated input from pageflip events and old vblank events
and old drmWaitVblank ioctl, implement new wraparound handling, which
also allows to deal with wraparound in the other direction, e.g., if a
32-Bit truncated sequence value is passed in, whose true 64-Bit
in-kernel hw value is within 2^30 counts of the previous processed
value, but whose 32-bit truncated sequence value happens to lie just
above or below a 2^32 boundary, iow. one of the two values 'sequence'
vs. 'msc_prev' lies above a 2^32 border, the other one below it.
The method is directly translated from Mesa's proven implementation of
the INTEL_swap_events extension, where a true underlying 64-Bit wide
swapbuffers count (SBC) needs to get reconstructed from a 32-Bit LSB
truncated SBC transported over the X11 protocol wire. Same conditions
apply, ie. successive true 64-Bit SBC values are close to each other,
but don't always get received in strictly monotonically increasing
order. See Mesa commit cc5ddd584d17abd422ae4d8e83805969485740d9 ("glx:
Handle out-of-sequence swap completion events correctly. (v2)") for
explanation.
Additionally add a separate path for true 64-bit msc input originating
from Linux 4.15+ drmCrtcGetSequence/QueueSequence ioctl's and
corresponding 64-bit vblank events. True 64-bit msc's don't need
remapping and must be passed through.
As a reliability bonus, they are also used here to update the tracking
values msc_prev and ms_high with perfect 64-Bit ground truth as baseline
for mapping msc from pageflip completion events, because pageflip events
are always 32-bit wide, even when the new kernel api's are used. Because
each pageflip(-event) is always preceeded close in time (and vblank
count) by a drmCrtcQueueSequence queued event or drmCrtcGetSequence
query as part of DRI2 or DRI3+Present swap scheduling, we can be certain
that each pageflip event will get its truncated 32-bit msc remapped
reliably to the true 64-bit msc of flip completion whenever the sequence
api is available, ie. on Linux 4.15 or later.
Note: In principle at least the 32-bit mapping path could also be
backported to earlier server branches, as this seems to be broken for at
least server 1.16 to 1.19.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
The function is ported from intel-ddx uxa backend around 2013, where its
stated purpose was to apply a vblank_offset to msc values to correct for
problems with those kernel provided msc values. Some (somewhat magic and
puzzling to myself) heuristic tried to guess if provided values were
unreasonable and tried to adapt the corrective vblank_offset to account
for that.
Except: It wasn't applied to kernel provided msc values, but the values
delivered by clients via DRI2 or Present, so valid client targetmsc
values, e.g., requesting a vblank event > 1000 vblanks in the future,
triggered the offset correction in arbitrarily wrong ways, leading to
wrong msc values being returned and thereby vblank events queued to the
kernel for the wrong time. This causes glXSwapBuffersMscOML and
glXWaitForMscOML to swap / return immediately whenever a swap/wait in >
1000 vblanks is requested.
The original code was also written to only deal with 32 bit mscs, but
server 1.20 modesetting ddx can now use new Linux 4.15+ kernel vblank
api to process true 64 bit msc's, which may confuse the heuristic even
more due to 32 bit integer truncation/wrapping.
This code caused various problems in the intel-ddx in the past since
year 2013, and was removed there in 2015 by Chris Wilson in commit
42ebe2ef9646be5c4586868cf332b4cd79bb4618:
" uxa: Remove the filtering of bogus Present MSC values
If the intention was to filter the return values from the kernel, the
filtering would have been applied to the kernel values and not to the
incoming values from Present. This filtering introduces crazy integer
promotion and truncation bugs all because Present feeds garbage into its
vblank requests.
"
Indeed, i found a Mesa bug yesterday which can cause Mesa's
PresentPixmap request to spuriously feed garbage targetMSC's into the
driver under some conditions. However, while other video drivers seem to
cope relatively well with that, modesetting ddx causes KDE-5's
plasmashell to lock up badly quite frequently, and my suspicion is that
the code removed in this commit is one major source of the extra
fragility.
Also my own tests fail for any swap scheduled more than 1000 vblanks
into the future, which is not uncommon for some scientific applications.
Iow. modesetting's swap scheduling seems to be more robust without this
function afaics.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Keith Packard <keithp@keithp.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
GBM objects were never destroyed after looking for format and
modifier compatibility when deciding whether flipping or copying
a presented pixmap.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106106
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Use the DRM_CAP_ADDFB2_MODIFIERS query to make sure the kms
driver supports modifiers in the addfb2 ioctl, and fall back
to addfb ioctl without modifiers if modifiers are unsupported.
E.g., as of Linux 4.17, nouveau-kms so far does not suppport
modifiers and gets angry if drmModeAddFB2WithModifiers() is
called (-> failure to set a video mode -> blank screen), but
Mesa's nvc0+ gallium driver causes gbm_bo_get_modifier() to
return a valid modifier by translating the default tiling of
bo's created via gbm_bo_create() into a modifier other than
DRM_FORMAT_MOD_INVALID (see Mesa's nvc0_miptree_get_modifier()).
Testing for != DRM_FORMAT_MOD_INVALID is apparently not
sufficient for safe use of drmModeAddFB2WithModifiers.
Bonus: Handle potential failure of populate_format_modifiers().
The required DRM_CAP is defined since libdrm v2.4.65, and we
require v2.4.89+ for the server, so we can use it unconditionally.
Tested on intel-kms, radeon-kms, nouveau-kms. Fixes failure on
NVidia Pascal.
Fixes: 2f807c2324 ("modesetting: Add support for multi-plane pixmaps when page-flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
ms_queue_vblank() returns false on failure.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
We would fail to get the FB ID if it wasn't already imported, since we
were checking to see if the pointer was NULL (it never was) rather than
if the content of the pointer was 0.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
drmmode_crtc_set_mode has a loop nested inside another loop, where both
of them were using 'i' as the loop iterator. Rename it to avoid an
infinite loop.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Non-atomic kms drivers like radeon-kms (or nouveau-kms with
default setting of "atomic ioctl disabled") don't export
any formats, so num_formats == 0.
Some atomic drivers (nouveau-kms with boot param nouveau.atomic=1,
or intel-kms on, e.g., Linux 4.13) expose num_formats == 0, or
don't expose any modifiers, so num_modifiers == 0.
Let the drmmode_is_format_supported() check pass in these cases
to allow page flipping, as it works just fine.
Tested on NV-96 for nouveau, HD-5770 for radeon, Intel Ivybridge
with Linux 4.13 and drm-next to fix page flipping.
Fixes: 9d147305b4 ("modesetting: Check if buffer format is supported when flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We need to make sure that the atomic commit are consistent
or else the kernel will reject it. For example, when moving
a CRTC from one output to another one, the first output CRTC_ID
property needs to be reset. Also if the second output was using
another CRTC beforehands, it needs to be disabled to avoid an
inconsistent state.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Povilas Kanapickas
Mario Kleiner
Patrik Jakobsson
Aaron Plattner
Łukasz Spintzyk
Lukasz Spintzyk
Olivier Fourdan
Kishore Kadiyala
Martin Peres
Uday Kiran Pichika
Dave Airlie
Alan Coopersmith
Jose Maria Casanova Crespo
Aaron Ma
Yuriy Vasilev
Michel Dänzer
Alex Goins
Kenneth Graunke
Adam Jackson
Ville Syrjälä
Keith Packard
Emil Velikov
Sven Joachim
Maarten Lankhorst
Hans de Goede
Ilia Mirkin
Lyude Paul
Jim Qu
Takashi Iwai
Stefan Agner
Michel Dänzer
Roman Gilg
Louis-Francis Ratté-Boulianne
Matt Turner
Daniel Stone