Rather than letting the DDX allocate the events, allocate them once in the DIX
and just pass it around when needed.
DDX should call GetEventList() to obtain this list and then pass it into
Get{Pointer|Keyboard}Events.
LoadModule() returns the only reference to a fresh piece of memory (a
ModuleDescPtr). Sadly, xf86LoadModules dropped the return value on the floor
leaking memory for each module it loaded.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
All the failure paths were very diligent in freeing the "fullpath" temporary
string, but the success case was not. All the content only got strdup()d, so
it's not live memory anymore.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
xf86LogInit allocates a piece of memory, stores it in lf. LogInit() will then
effectively strdup it, but lf is never freed again.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
We need to start breaking the XKB API to enforce sanity, so drag whichever
headers we need to do so into the server tree, as the client API is set in
stone, being part of Xlib.
Now resizing it won't produce weir overlaps of the widgets. Thanks to
Pelle Johansson for his help showing me how to do this.
(cherry picked from commit ef3498e92d13c82633fdbe8120396bfbe1e7489a)
After trying to switch from X to VT (or just quit) the video-amd driver
attempts to issue INT 10/0 to go to mode 3 (VGA). The emulator, running
the BIOS code, would then spit out:
c000:0282: A2 ILLEGAL EXTENDED X86 OPCODE!
The opcode was 0F A2, or CPUID; it was not implemented in the emulator.
This simple patch, against 1.3.0.0, handles the CPUID instruction in one of
two ways:
1) if ran on __i386__ or __x86_64__ then it calls the CPUID instruction
directly.
2) if ran elsewhere it returns a canned 486dx4 set of values for
function 1.
This fix allows the video-amd driver to switch back to console mode,
with the GSW BIOS.
Thanks to Symbio Technologies for funding my work, and ThinCan for
providing hardware :)
Signed-off-by: Bart Trojanowski <bart@jukie.net>
Acked-by: Eric Anholt <eric@anholt.net>
'Loading foo' is verbosity 3, whereas 'already built-in' is verbosity 0.
This means that gdm's log would just be full of bare 'module already
built-in' messages.
Also fixed DarwinEQEnqueue to match changes to the callback
And also use dpmsstubs.c rather than copying the code into darwin.c
(cherry picked from commit 4c5c30a4beb7a427b00b18097f548876ad3c11d7)
xf86CrtcRotate() is called by randr 1.2 drivers via xf86CrtcSetMode() or xf86SetDesiredModes()
during ScreenInit() at which point pScrn->pScreen is not set. If a user specifies a rotation
in their config file pScrn->pScreen is dereferenced and boom.
8 bit color still doesn't work, but the -depth command line argument now works properly.
(cherry picked from commit 6765949c27c053d22882f54337cfd09203aa5383)
RISC chips that trap on unaligned loads and stores need to
define __GLX_ALIGN64. This used to get added to the cflags
in the old *.cf files but it no longer does in the modular
X server.
Also, Alpha needs to pass -mieee to the compiler as well.
This is a simple backport of a patch that debian, and probably other
distributions, have been applying forever. To the best of my
knowledge the patch was written by Jurij Smakov. See Debian bug
number #388125.
I just checked and this has been rotting for more than a year in
freedesktop bugzilla as #8392.
Signed-off-by: David S. Miller <davem@davemloft.net>
First mode is _always_ preferred in 1.4; the bit that used to mean this
now means that the preferred mode is also the native pixel format. The
old "is GTF" bit now means "is continuous-frequency" instead.
Section 3.6.4, Table 3.14: Feature Support, Notes 4 and 5.
Nothing actually decoded yet, but at least we print what they are.
New in EDID 1.4:
- Color Management Data (0xF9), Section 3.10.3.7
- CVT 3 Byte Code Descriptor (0xF8), Section 3.10.3.8
- Established Timings III Descriptor (0xF7), section 3.10.3.9
- Manufacturer-specified data tag (0x00 - 0x0F), section 3.10.3.12
I need sleep! Why am I making these stupid mistakes... sorry for pointless commit spam. ugg.
(cherry picked from commit b16351fc6457aabead328472d16dc25789032940)
General code cleanup, whitespace, dead code removal, added missing prototypes.
Made Xquartz come to foreground later in startup, so it doesn't appear for Xquartz -version
(cherry picked from commit 36922e8ff4316c93843aa3fe959cf8df3c7d5892)
(in case we get reports about slow launch times, this will
help clarify what's happening)
(cherry picked from commit 2eea3483cf893f8f81bacd434b31408dfb38cb06)
It's out of date and not included in the build. Instead, xf86DefModeSet.c is
built from vesamodes and extramodes using modeline2c.awk and *that's* what gets
built.
Sorry for the commit spam... I'm tired and was overly quick to commit... forgot to include a neccessary file.
(cherry picked from commit e564b7aeaab63e4c943445275af680b3b5898a94)
Don't hardcode X11.app's path in the launchd plist.
Only install the launchd plist if we --enable-launchd.
(cherry picked from commit 6b74c535dc331d1d621b2541492a3336f69d70a2)
Leaving xpr unflattened since we want modularity to replace that with xpc (XPluginComposite) at some point
(cherry picked from commit 48e6a75fbdd0fee86e364f02ace83f20b312a2b2)
From bugzilla bug 13467¹:
Currently the xserver fails to build without this (now deleted) file, as the
Makefile tries to distribute it. The patch simply removes the reference to
modeline2c.pl.
1] http://bugs.freedesktop.org/show_bug.cgi?id=13467
Signed-off-by: James Cloos <cloos@jhcloos.com>
Don't run VT switches, terminations, or anything, on the core keyboard: only
run actions which affect the keyboard state. If we get an action such as VT
switch, just swallow the event.
Taking out the trash.
We don't need dumpkeymap since we'll be getting keymaps straight from the OS. .Xmodmap should be sufficient for any user-needed changes. If this is not
the case, please let us know, so we can address any problems you have.
fullscreen never worked AFAIK
cr isn't being used and xpr is much better.
(cherry picked from commit e41af2967e885466c4d194fa4c3b358e6be37c30)
This should hopefully eliminate confusion some people have over which X11.app is which.
Now BOTH are in /A/U/X11.app and we intelligently determine whether to execute our app_to_run
or launch the server. If arguments are given, we launch the server. Otherwise if we can
connect to an X DISPLAY, we execute app_to_run. Otherwise, we launch the server.
(cherry picked from commit e7026216ccaa8e4fb073800ba947c9909d4faada)
From bugzilla bug 13467¹:
The modeline2c script is the only part of the Xorg server that requires Perl.
[This] is a simpler replacement that works with any normal AWK.
1] http://bugs.freedesktop.org/show_bug.cgi?id=13467
Bug was posted by Joerg Sonnenberger <joerg@NetBSD.org>.
if X is not the active application.
fixes <rdar://problem/5167664> xeyes dead until window activation
(cherry picked from commit c7573379a85a1480cc51650075078e41dafe56af)
window to another Space, it will work correctly (as opposed
to just leaving a ghost window). We accomplish this by listening
for the notification from Xplugin that our window has been moved,
and then we ask X11 to move the window to the new location.
(cherry picked from commit 2d50ea8013e7c1639d570e227b53b037fb567565)
button 2 click would actually result in a Command-2 chord.
(I.e. it wasn't releasing Command before clicking the fake button.)
(cherry picked from commit 0d5dd5dffa4c5ce3f54dfe53720a39d524dc8e37)
We free the ValuatorClassRec quite regularly. If a SIGIO is handled while
we're swapping device classes, we can bring the server down when we try to
access lastx/lasty of the master device.
window to another Space, it will work correctly (as opposed
to just leaving a ghost window). We accomplish this by listening
for the notification from Xplugin that our window has been moved,
and then we ask X11 to move the window to the new location.
This fixes an undefined symbol error happening when compiling
the server with the --disable-xv configure switch.
Basically, xnest was linking against
@XSERVER_LIBS@ and @XNEST_LIBS@ and the order of the libraries
given to the linker at the end of the process was bogus.
* configure.ac: make XNEST_LIBS contain the $XSERVER_LIBS re-ordered
in such a way that the linker finds the symbols of all the libs contained
in $XNEST_LIBS.
* hw/xnest/Makefile.am: don't link against @XSERVER_LIBS@ anymore because
XNEST_LIBS contains the right thing.
These hints allow an acceleration architecture to optimize allocation of certain
types of pixmaps, such as pixmaps that will serve as backing pixmaps for
redirected windows.
If the originating mode didn't have a name, we would end up with the name of
the original mode being setup correctly, but with the name of the copy still
being NULL.
In a multihead setup, if only the first screen can be
initialized, but the second screen is mentioned first in the
ServerLayout section, the xf86InitOrigins() function will crash
because the screen referred to in the e.g. "RightOf" part is
non-existent.
The transformation between fbdev and xfree86 mode timings needs to be
invertible, otherwise Xen and other framebuffers that don't have real
pixel clocks won't initialize.
This makes the root visual a GLX capable visual again and adds a GLX visual
for the COMPOSITE ARGB visual cleanly (as opposed to the hack we had before).
This changes the module initalization order so that the GLX module initializes
after COMPOSITE. The reason for this change is to be able to initialize a
GLX visual config for the COMPOSITE ARGB visual.
Call ProcessOtherEvents first, then for all keyboard devices let them be
wrapped by XKB. This way all XI events will go through XKB.
Note that the VCK is still not wrapped, so core events will bypass XKB.
(cherry picked from commit d627061b48)
Don't build XF86Misc or XF86Vidmode in hw/xfree86/dixmod when it's been
explicitly disabled in configure, or we don't have the proto modules
installed.
Instead of removing the preference bit marking the hardware declared mode
preference, leave it in place and just move the user preferred mode to the
front of the list while marking it with the USERPREF bit which will cause it
to be selected by the initial mode selection code.
Hide getline call by checking for glibc. If not, use fgetln instead. Even
though this section is now #ifdef'ed for linux only, this should help make
it more portable if non-linux folks end up wanting it.
It contains static paths, fails to build on non-glibc, and apparently just
exists to support distributions managing binary drivers and open-source drivers
together. Also restores previous code for fallback to vesa if nothing is
detected.
Right now we default to "all" which gives us a situation much like before,
but when the "typical" option is implemented, we can change the default and
reduce the number of visuals the GLX module bloats the X server with.
Instead of the fragile setup where we filter the modes common between the
DDX generated GLX visuals and the DRI driver generated fbconfigs, we now
just take the fbconfigs returned by the DRI driver to be our supported set.
A lot of EDID writers apparently end up stuffing centimeters (like the
maximum image size field) into the detailed timings, instead of millimeters.
Some of them only get it wrong in one direction. Also, add a quirk to let
us mark the largest 75hz mode as preferred, which will often be used for
EDID 1.0 CRTs.
If none is present, a default one will be created. This will be attached
to either the first device section in the xorg.conf (allowing you to
specify something like using EXA without having a screen section) or a
default screen section if none is present in the file.
This will allow the screen to not explicitly have a device section. If
this is the case and there is a device section in the xorg.conf, the first
one will be used. If there is no device section at all, a default one will
be created that loads the automatically determined module.
This is what we're currently shipping in Debian. Enables the ability for
drivers to ship a text file listing PCI ID's they support, and have the
server read them on startup when no driver is specified. This works, but
isn't the final solution.
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitScreen): try and detect when the host has no
DRI support. In that case, switch to the -nodri behaviour.
When in the -nodri case, make sure not to skip glx visual
initialisation.
* hw/kdrive/ephyr/ephyrinit.c:
(ddxProcessArgument): disabling visual init here
is bad because it gets disabled even when we want
to use software GL, leading to Xephyr :1 -nodri
crashing in mesa.
We can now launch GL or XV apps in any of the
Xephyr screens we want.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window):
(hostx_create_window): make these functions be screen
number aware.
* hw/kdrive/ephyr/XF86dri.c : fix some compiler warnings.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIQueryDirectRenderingCapable),
(ephyrDRIOpenConnection),
(ephyrDRIAuthConnection),
(ephyrDRICloseConnection),
(ephyrDRIGetClientDriverName),
(ephyrDRICreateContext),
(ephyrDRIDestroyContext),
(ephyrDRICreateDrawable),
(ephyrDRIGetDrawableInfo),
(ephyrDRIGetDeviceInfo): in all those functions, don't forward
the screen number we receive - from the client - to the host X.
We (Xephyr) are always targetting the same X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrdriext.c:
(EphyrMirrorHostVisuals): make this duplicate the visuals of the host X
default screen into a given Xephyr screen. This way we have a chance
to update the visuals of all Xephyr screen to make them mirror those
of the host X.
(many other places): specify screen number where required by the api
change in hostx.h.
* hw/kdrive/ephyr/ephyrglxext.c: specify screen number where required
by the api change in hostx.h
* hw/kdrive/ephyr/ephyrhostglx.c: don't forward the screen number we
receive - from the client - to the host X.
We (Xephyr) are always targetting the same
X display screen, which is
the one Xephyr got launched against. So we enforce that in the code.
* hw/kdrive/ephyr/ephyrhostvideo.c,h: take in account the screen number received
from the client app. This is useful to know on which Xephyr screen we
need to display video stuff.
* hw/kdrive/ephyr/ephyrvideo.c: update this to reflect the API change
in hw/kdrive/ephyr/ephyrhostvideo.h.
(ephyrSetPortAttribute): when parameters are not valid
- they exceed their validity range - send them to the host anyway
and do not return an error to clients.
Some host expose buggy validity range, so rejecting client for that
is too harsh.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_has_xshape),
(hostx_has_glx),
(hostx_has_dri): added these new entry points
* hw/kdrive/ephyr/ephyrdriext.c:
(ephyrDRIExtensionInit):
check presence of DRI and XShape extensions before
trying to use them.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrHijackGLXExtension):
check presence of glx extension before we use it.
* hw/kdrive/src/Makefile.am: use fb/fbcmap_mi.c
and not fb/fbcmap.c. This allows kdrive to take advantage of
extensions redefining the entry points of micmap.c stuff.
For instance it allows Xephyr to have a working GL, which is not
possible otherwise, because GL redefines mInitVisualsProc
to initialise its visuals.
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): force the back clipping rects
to equal the front clipping rects.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly overclip the clipping rects we
got from the client. This bug fixes a clipping rect that was too
small in height, basically. Also fix a possible mem corruption.
* hw/kdrive/ephyr/hostx.c:
(hostx_set_window_geometry): remove a useless XSync
* hw/kdrive/ephyr/ephyr.c:
(ephyrInitialize): cleanup ephyrDRI extension init.
remove functions that belongs in ephyrdriext.c .
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRICreateDrawable): create the drawable on the host X peer
window, not on the host xephyr main window.
(ephyrDRIGetDrawableInfo): get drawable info of the host X peer
window.
* hw/kdrive/ephyr/ephyrdriext.c: make ephyr DRI extention wrap
a bunch of screen ops so that it can update the host X peer
window whenever DRI bound drawable are moved in Xephyr.
Also code the building blocks of the management of the
host X window peer.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_create_window): added this new entry point
(hostx_destroy_window): ditto
()hostx_set_window_geometry): ditto
* hw/kdrive/ephyr/ephyrdri.c:
(ephyrDRIGetDrawableInfo): quickly hook
this into getting the drawable info from the host
X server. For the time being, this only gets the drawable info
of the Xephyr main window in the host. It should really get
the info of a the peer drawable in the host X. So there should be a
peer drawable to begin with.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): some cleanups. Properly get the
the drawable info otherwise there is a host X hang.
* hw/kdrive/ephyr/ephyrhostglx.c: do not
(ephyrHostGLXQueryVersion): do not use C bindings of the glx protocol
calls. Some of those actually access DRI context directly, resulting
in the context having three clients. Instead all XF86DRI proto
fowarding request should be coded by hand and only forward the
protocol requests
* hw/kdrive/ephyr/ephyrglxext.c:
fixed various logging functions
(ephyrGLXGetStringReal): make sure all the string is sent to clients
including the ending zero.
* hw/kdrive/ephyr/ephyrhostglx.c:
(ephyrHostGLXGetStringFromServer): better error handling.
(ephyrHostGLXSendClientInfo): ditto.
(ephyrHostGLXMakeCurrent): ditto
* hw/kdrive/ephyr/ephyr.c:
(EphyrDuplicateVisual): when duplicating the
visual, copy the color component masks and the class
from the hostX
(EphyrMirrorHostVisuals): don't mix blue and green mask.
* hw/kdrive/ephyr/ephyrdri.c: add more logs.
(ephyrDRICreateDrawable): actually implement this.
for the moment it creates a DRI drawable for the hostX window,
no matter what drawable this call was issued for.
(ephyrDRIGetDrawableInfo): actually implemented this.
for the moment the drawable info queried for its attrs is the
Xephyr main main window.
* hw/kdrive/ephyr/ephyrdriext.c:
(ProcXF86DRIGetDrawableInfo): properly hook this dispatch
function to the ephyrDRIGetDrawableInfo() function.
* hw/kdrive/ephyr/ephyrglxext.c: add a bunch of GLX implementation hooks
here. Hijack some of the xserver GLX hooks with them. Still need to
properly support byteswapped clients though.
* hw/kdrive/ephyr/ephyrhostglx.c,h: actually implemented the protocol
level forwarding functions used by the GLX entr points in
ephyrglxext.c. Here as well, there are a bunch of them, but we are
far from having implemented all the GLX calls.
* hw/kdrive/ephyr/hostx.c,h:
(hostx_get_window_attributes): added this new entry point
(hostx_allocate_resource_id_peer): added this to keep track of
resource IDs peers: one member of the peer is in Xephyr, the other
is in host X.
(hostx_get_resource_id_peer): ditto.
* hw/kdrive/ephyr/ephyr.c: make Xephyr mirror
the visuals of the host X upon startup. This
is important for GLX client apps.
* hw/kdrive/ephyr/hostx.c,h: add a hostx_get_visuals_info()
to get the visuals of the host X.
* hw/kdrive/ephyr/ephyrglxext.c:
(ephyrGLXGetFBConfigsSGIX): proxy the GLXGetFBConfigsSGIX call.
It is a vendor extension to get the visual configs as a list of
name/value pairs.
(ephyrHijackGLXExtension): hijack the VendorPriv_dispatch_info
dispatch table to register our implementation of GLXGetFBConfigsSGIX
(ephyrGLXGetFBConfigsSGIXReal): added this where the real
implementation of GLXGetFBConfigsSGIX is. It support bytes swapping.
(ephyrGLXGetFBConfigsSGIX,ephyrGLXGetFBConfigsSGIXSwap): these are
the dispatch entry points. They just call
ephyrGLXGetFBConfigsSGIXReal.
* hw/kdrive/ephyr/ephyrhostglx.c,h: reorganize the proxies to get
visual params from the host so that they clearly support the different
methods of doing so.
* hw/kdrive/ephyr/Makefile.am: add the proxy extension to
ephyr. The proxy extension is an experimental extension that
forwards protocol packets targeted at a given extension to the
host X.
* hw/kdrive/ephyr/ephyr.c: init proxy ext.
* hw/kdrive/ephyr/ephyrhostproxy.c,h: added this new file as part of the
proxy extension.
* hw/kdrive/ephyr/ephyrproxyext.c,h: ditto
* hw/kdrive/ephyr/hostx.c: add the hostx_get_get_extension_info() entry
point.
* hw/kdrive/ephyr/XF86dri.c: re format this correctly.
Make function decls honour the Ansi-C standard.
* hw/kdrive/ephyr/ephyr.c: protect glx/dri related
extension initialisation with the XEPHYR_DRI
macro. Initialize the GLX ext hijacking
at startup.
* hw/kdrive/ephyr/ephyrdri.c: add more logging to ease debugging
* hw/kdrive/ephyr/ephyrdriext.c: ditto. reformat.
* hw/kdrive/ephyr/ephyrglxext.c,h: add this extension to
proxy GLX requests to the host X. started to proxy those nedded to
make glxinfo work with fglrx. Not yet finished.
* hw/kdrive/ephyr/ephyrhostglx.c,h: put here the actual
Xlib code used to hit the host X server because Xlib stuff cannot be
mixed with xserver internal code, otherwise compilation erros due to
type clashes happen. So no Xlib type should be exported by the
entrypoints defined here.
* hw/kdrive/ephyr/ephyrhostvideo.c/h:
(ephyrHostXVStopVideo): add this entry point.
* hw/kdrive/ephyr/ephyrvideo.c:
Basically add ReputImage and StopVideo implementations.
Now, when other windows obscur the video window, the reclipping
seems to be well handled using StopVideo and ReputImage.
To do this, I was obliged to save the frame in PutImage, so
that I could resend it un ReputImage.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrXVPrivQueryHostAdaptors): properly set
port private luke. This fixes a crash when
the host Xv supports multiple ports.
Make sure number of ports cannot be zero.
* configure.ac,include/dix-config.h.in: define the XEPHYR_DRI macro.
define it when --enable-xephyr and --enable-dri are both turned on.
* hw/kdrive/ephyr/XF86dri.c: copy this from mesa source to enable
Xephyr to talk DRI protocol the host X. In mesa, this is used by libGL.so to
talk DRI protocol with the server.
* hw/kdrive/ephyr/ephyr.c: finally initialise the DRI extension
in the ephyrInitScreen() function.
* hw/kdrive/ephyr/ephyrdri.c,ephyrdriext.c: safeguard the compilation
using the XEPHYR_DRI macro.
* hw/kdrive/ephyr/ephyrdriext.c: added this to implement a DRI extension
into Xephyr. Normally the DRI extension is only present in the
xfree86 server, but I have ported it to Xephyr. The extension calls
functions that declared/defined in ephyrdri.h ephyrdri.c that
forwards the DRI calls to the host X. It does not work yet, as this
entry is just to put the big bricks in place.
* hw/kdrive/ephyr/ephyrdri.c,h: declaration & definition of the
DRI client API that would hit the hostX server.
* hw/kdrive/ephyr/GL/internal/dri_interface.h: added this, otherwise
inclusion of /usr/include/X11/dri/xf86dri.h won't compile
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(ephyrHostXVPutImage): make this support clipping region.
The clipping region is propagated to host using XSetClipRectangles.
This changes the API of ephyrHostXVPutImage.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrPutImage): propagate the clipping region to the new
ephyrHostXVPutImage() entry point.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrInitVideo) make the EphyrXVPriv object be a
singleton instance, otherwise a new object is created at each
generation.
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(ephyrHostXVAdaptorHasPutVideo): detect if
host X has the PutVideo call.
(ephyrHostXVAdaptorHasPutStill): detect if
host X has the PutStill call
(ephyrHostXVAdaptorHasPutImage): detect if
host X has the PutImage call
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrXVPrivQueryHostAdaptors): make sure to create
atoms for attribute names otherwise subsequent
calls to get/set attribute from clients won't work.
(ephyrXVPrivSetAdaptorsHooks): don't hardwire advertising
of the PutImage call. Instead, advertise the calls advertised
by the host.
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(ephyrHostXVLogXErrorEvent): add this to
log X error events. Heavily copied from libx11
(ephyrHostXVErrorHandler): new x error handler that
logs the error but does not exits.
(ephyrHostXVInit): add this to be called at the beginning
of xvideo lifetime. It sets an xerror handler that does not
exit.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrXVPrivIsAttrValueValid): this validates an attribute
value.
(ephyrSetPortAttribute): before setting an attribute,
validate the new value so that we don't send a buggy
request to host X.
* hw/kdrive/ephyr/*.c: fix case in ephyrvideo code.
* hw/kdrive/ephyr/ephyr.c: fix a typo
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(EphyrHostXVPutImage): first implementation. does not
support clipping regions yet.
* hw/kdrive/ephyr/ephyrvideo.c:
(DoSimpleClip): clip using a clipping box. Does not
support regions yet.
(EphyrPutImage): first implementation.
Uses a simple clipping rectangle, no region yet.
* hw/kdrive/ephyr/hostx.c:
(hostx_get_window): added this to get the main
window of the host x.
* hw/kdrive/ephyr/ephyrhostvideo.c,h:
(EphyrHostXVQueryImageAttributes): add this call. It calls
XvQueryBestSize xserver entry point. It uses the protocol
level machinery because Xvlib does not expose that entry point
as a C function.
(EphyrHostXVQueryBestSize): added this wrapper around XvQueryBestSize().
(EphyrHostGetAtom, EphyrHostGetAtomName): added this to get
an atom or atom name from the host server
* hw/kdrive/ephyr/ephyrvideo.c:
(EphyrSetPortAttribute): convert the atom into an host server
server atom before attacking the host server with it, because in
in its current form, the input atom is only valid in xephyr.
This fix makes this call work.
(EphyrGetPortAttribute): ditto.
(EphyrQueryBestSize): implement this.
(EphyrQueryImageAttributes): implement this.
* hw/kdrive/ephyr/ephyrhostvideo.c:
(EphyrHostXVAdaptorGetVideoFormats): properly get visual class instead of
returning the visual id.
(EphyrHostXVQueryEncodings): properly copy the fields because simple casting does
truncate some fields.
(EphyrHostAttributesDelete): XFree the whole array instead of trying to free invidial members.
* hw/kdrive/ephyr/ephyrvideo.c:
(ephyrInitVideo): fix a typo
(EphyrXVPrivQueryHostAdaptors): set XvWindowMask mask to adaptors type.
use host adaptor name. Don't forget to set nImages field.
(EphyrXVPrivRegisterAdaptors): report an error when KdXVScreenInit() fails.
* This patch adds multiscreen support to Xephyr. For instance,
the command line : "Xephyr :4 -ac -screen 320x240 -screen 640x480"
will launch with two "screens" - namely two main windows.
The first main window represents a screen that has the number :4.0, with
a geometry of 320x240 pixels, and the second one represents a screen
that has the number :4.1 with a geometry of 640x480.
The command line: "DISPLAY=:4.1 xclock" will launch the xclock program
on the second screen, for intance.
* this patch was edited by Dodji Seketeli <dodji@openedhand.com> for:
- better style compliance with the rest of the Xephyr code
- make sure Xephyr could be launched with no -screen option. By
default that creates a default screen of 640x480 pixel like before
- display full titles on the windows - with insctructions to grab
keyboard and mouse - like before.
DGAStealXXXEvent modified to take in device argument.
The evdev driver only sends one valuator when only one axis changed. We need
to check for DGA either way (xf86PostMotionEventP), otherwise we lose purely
horizontal/vertical movements.
Note that DGA does not do XI events.
Center the frame around the first pointer found and then update all pointers
on the same screen to move to the edges (if necessary).
Note: xf86WarpCursor needs to be modified, is using deprecated
miPointerWarpCursor and will kill the server when called with
inputInfo.pointer.
Removes "LookupKeyboardDevice" and "LookupPointerDevice" in favor of
inputInfo.keyboard and inputInfo.pointer, respectively; all use cases
are non-XI compliant anyway.
Matches linuxPci.c changes made in 8279444a54
Fixes compiler errors:
"ix86Pci.c", line 194: too many struct/union initializers
"ix86Pci.c", line 204: too many struct/union initializers
"ix86Pci.c", line 214: too many struct/union initializers
When processing events from the EQ, _always_ call the processInputProc of the
matching device. For XI devices, this proc is wrapped in three layers.
Core event handling is wrapped by XI event handling, which is wrapped by XKB.
A core event now passes through XKB -> XI -> DIX.
This gets rid of a sync'd grab problem: with the previous code, core events
did disappear during a sync'd device grab on account of mieqProcessInputEvents
calling the processInputProc of the VCP/VCK instead of the actual device. This
lead to the event being processed as normal instead of being enqueued for
later replaying.
Even though they're defined to zero by the spec, we've seen an EDID block
where the (empty) ASCII strings were stuffed in a byte early, leading to the
descriptor being considered a detailed timing instead.
The only functional changes in this patch are a removal of use of
Xtrans internals -- replaced by xcb, which doesn't seem to be used
elsewhere in the server? Pity.
Also, a fix to make all X11 windows pop to the front of the display
when the X11.app icon is clicked -- currently takes two clicks,
not sure why.
At least on my system (10.5 with the latest and greatest modules),
Xquartz now builds out of the box. It doesn't quite work yet, but
hey -- you have to start somewhere. ;)
This was an attempt to avoid scratch gc creation and validation for paintwin
because that was expensive. This is not the case in current servers, and the
danger of failure to implement it correctly (as seen in all previous
implementations) is high enough to justify removing it. No performance
difference detected with x11perf -create -move -resize -circulate on Xvfb.
Leave the screen hooks for PaintWindow* in for now to avoid ABI change.
Call ProcessOtherEvents first, then for all keyboard devices let them be
wrapped by XKB. This way all XI events will go through XKB.
Note that the VCK is still not wrapped, so core events will bypass XKB.
Add keyc->postdown, which represents the key state as of the last mieqEnqueue
call, and use it when we need to know the posted state, instead of the
processed state (keyc->down). Add small functions to getevents.c to query and
modify key state in postdown and use them all through, eliminating previously
broken uses.
In commit 41bb9fce47, the event delivery loop
for Xinput enabled keyboards was changed and accidentally used the wrong
index variable, causing random events to be delivered when returning from VT
switch.
In addition, in commit aeba855b07,
SIGIO was blocked during delivery of these events, but not for the entire
period the xf86Events array was being used. Block SIGIO for the whole loop
to avoid other event delivery from trashing the key release events.
(cherry picked from commit aa7ed1f5f35cd043bc38d985500aa0a32e857e84)
Previously, the server version reported by xdpyinfo and Xorg -version would
bear some vague resemblance to a X.Org katamari version, but in the presence
of modularization (and client-server relationships with different katamari
versions on each side) those numbers don't really make sense. Instead, just
report the package version.
When branching a stable branch, master's version should be immediately updated
to the endpoint of the stable branch plus a snapshot of 1 (for example,
1.4.0.1 after server-1.4-branch). The stable branch should then be changed to
RC0 at that time (1.3.99.0, for example).
This scheme was partially attempted for server 1.3, but lacked the appropriate
master updates, thus why it had to be revisited now. While here, we can also
remove a lot of versioning complexity since everything is based on the package
version.
* configure.ac: re-sort Kdrive libs so that symbols get properly resolved.
Basically, all some libs are present in both $KDRIVE_LIBS and $XSERVER_LIBS,
and some libs orders are not correct. So I made sure Kdrive servers don't have
to link against $KDRIVE_LIBS *and* $XSERVER_LIBS. They just have to link
against $KDRIVE_LIBS now.
* hw/kdrive/*/Makefile.am: update those makefile to reflect the change in configure.ac
One of these I introduced by listing dix and mi in the same library list to
simplify other servers. The other had been hacked around using libosandcommon,
which is now gone.
This cleans up server Makefile.ams a little bit, but also means that people
messing with configure.ac need to be careful with whether they put libraries
in the _LIBS or _SYS_LIBS targets. Hopefully the comment in configure.ac will
clarify the issues.
The author of the int10 code looked at the VBIOS POSTing code
in DOSEMU to get some initial idea on how to POST a VBIOS.
To give credit to the DOSEMU Team for this inspiration a comment
was added to the code which could suggest that code from the
GPLed DOSEMU was directly incorporated into this code.
This patch should clearify the situation.
Licensing issues of these files include:
- They claim to be licensed under the GPL, yet we haven't allowed that in the
xserver repository in the past.
- They refer the user to the top of the tree for GPL license text, yet it isn't
there.
- They claim to be derived from the (MIT-licensed) ati kdrive code, yet don't
follow the licensing terms of those files.
Note that pciaccess doesn't yet have Net/OpenBSD support, but the relevant
code should go there instead of disconnected code in the X Server.
While here, remove the now-disabled INCLUDE_XF86_NO_DOMAIN from the headers,
and un-disable xf8StdAccResFromOS for those OSes without domain support which
will need it.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
This was a bunch of poorly defined resource ranges per OS/platform combination
which were supposed to represent what regions could potentially have resources
allocated into them.
Debian bug #272368http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=272368
In certain locales, some characters from some TrueType fonts were not
appearing in the Xprint postscript output due to the font not being
identified in the postscript output.
Composite's automatic redirection is a more general mechanism than the
ad-hoc BS machinery, so it's much prettier to implement the one in terms
of the other. Composite now wraps ChangeWindowAttributes and activates
automatic redirection for windows with backing store requested. The old
backing store infrastructure is completely gutted: ABI-visible structures
retain the function pointers, but they never get called, and all the
open-coded conditionals throughout the DIX layer to implement BS are gone.
Note that this is still not a strictly complete implementation of backing
store, since Composite will throw the bits away on unmap and therefore
WhenMapped and Always hints are equivalent.
xf86RandR12ScreenSetSize must protect calls to EnableDisableFBAccess with
suitable vtSema checks to avoid invoking driver code while the X server is
inactive.
The multi-crtc cursor code in hw/xfree86/modes holds a reference to the
current cursor. This reference must be correctly ref counted so the cursor
is not freed out from underneath this code.
This is where they should have been in the first place. All the rest of
the code in the server defines such things in the source files, not the
headers.
A bunch of CFLAGS had gone missing, so the build failed with errors like:
../../../../../hw/xfree86/os-support/linux/lnx_ev56.c:7:19: error: input.h: No such file or directory
../../../../../hw/xfree86/os-support/linux/lnx_ev56.c:8:24: error: scrnintstr.h: No such file or directory
As a result, we can remove the quirks that existed to flip the bits back around
for us. This is not confirmed in all cases due to lack of bugs containing EDID
blocks associated with the quirks, but is likely true.
I exported the evdev driver to Xephyr server. I'm running it using something
like:
$ ./hw/kdrive/ephyr/Xephyr :1 -mouse evdev,,device=/dev/input/event4 -keybd \
evdev,,device=/dev/input/event1,xkbmodel=abnt2,xkblayout=br
It also closes /#5668.
and the Xephyr virtual mouse keeps alive. With this patch the semantic changes
turning '-pointer' && 'Xephyr virtual mouse' always false.
Now we can open a device pointer and pass its options in Xephyr's command line
without having other pointer unused.
The outport is most likely unnecessary on any currently used hardware,
the byte copy is necessary from what I know on IA64 and friends so leave it.
Add a new API entry point which lets a driver select the old behaviour if
such a needs is ever found.
This gives me ~20% speed up on startup on 945 hardware.
If NoAutoAddDevices is given as a server flag, then no devices will be added
from HAL events at all. If NoAutoEnableDevices is given, then the devices will
be added (and the DevicePresenceNotify sent), but not enabled, thus leaving
policy up to the client.
Make sure the font path is always 'built-ins' when we use built-in fonts,
rather than having it as a fixed path for a while, then clobbering it
halfway through startup.
Peter Hutterer
Arjan van de Ven
Daniel Stone
Maarten Maathuis
Jeremy Huddleston
Jeremy Huddleston
Kristian Høgsberg
Kristian Høgsberg
Adam Jackson
Jeremy Huddleston
Bart Trojanowski
liuhong
Matthieu Herrb
Benjamin Tissoires
Coleman Kane
Julien Goodwin
Eamon Walsh
Hong Liu
Matthieu Herrb
Tiago Vignatti
Dave Airlie
Peter Harris
Alan Coopersmith
Richard Purdie
David Nusinow
Julien Cristau
Alex Deucher
Jurij Smakov
David S. Miller
Dave Airlie
Samuel Thibault
Ben Byer
Otavio Salvador
Arkadiusz Miskiewicz
Aaron Plattner
Ben Byer
Jeremy Huddleston
Brice Goglin
Andrew Oakley
Dave Airlie
James Cloos
Matthias Hopf
Dodji Seketeli
Michel Dänzer
Adam Jackson
Tormod Volden
Mark Vytlacil
Keith Packard
Eric Anholt
Dodji Seketeli
Andrew Christan
Alex Deucher
Michel Dänzer
Tilman Sauerbeck
Alan Hourihane
Ademar de Souza Reis Jr
Gerte Hoogewerf
Ian Romanick
Egbert Eich
Eugeniy Meshcheryakov
Adam Jackson
Alex Deucher
Blair Sadewitz
Jeremy C. Reed
Dave Jones
Gustavo Pichorim Boiko
Tiago Vignatti
Roland "Test-tools" Bär
Daniel Drake