If you want to run a pre-1999 kernel, you'll need a pre-2009 X server
[Some pre-Solaris 8 VT support is left by this patch to allow reuse by
the new Solaris VT support that follows in the next patch.]
Signed-off-by: Aaron Zang <Aaron.Zang@Sun.COM>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
We were generating a shared library, but this lib is foobar, the parser
requires some symbols from the X server or from the program its being linked
into. If the program its being linked into (say a python .so) has symbol
visibility enabled then it will fail to dynamic link, also if this .so has
symbol visiblity enabled it will fail to dynamic link.
Screw it go back to a .a file really unless someone cleans it up properly.
Signed-off-by: Dave Airlie <airlied@redhat.com>
xf86PostKeyboardEvent also makes use of xf86PostKeyEventP to avoid code
duplication, and the valuator verification has been split into the
XI_VERIFY_VALUATORS macro.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Inside a windowing system, it's not the place to probe for devices. Goodbye
-probe and -probeonly.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Such stupid and ugly way to dump PCI information! Oh boy... Anyway, this
doesn't belong to the X server at all. Go away!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This changes the ABI, but since the video ABI is at 6 already
it should be fine.
driver changes are in the pipeline after this.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes screensaver fadeout effects.
Also make all RandR 1.2 compatibility code for XF86VidMode operate only on the
CRTC associated with the compatibility output, not all CRTCs at once.
This was a vestige from the days before we'd make the mode list from the
EDID data, and from CRT technology when you could reasonably assume that
higher refresh rates were better. Also it did not function as advertised,
acting as a high-pass filter instead of a band-pass.
xextproto had Xlib client headers moved into libXext.
Protocol header files are named fooproto.h, header files with constants
foo.h or fooconst.h where foo.h was already in use for client-side headers.
Not all chipsets need to rely on the int10 scheme to do its daily work.
Well, the ideal would be to remove all int10 module from the server. I'll try
to provide some patches "soon" for this. Something like:
http://cgit.freedesktop.org/~vignatti/libx86/
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Not all drivers need this kind of access as well.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Not all drivers need this kind of access.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
These old interfaces are no longer supported by the server, removing them
requires bumping the video driver ABI. Note that this is not guaranteed to
be the last change in ABI version 6.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The old DRI2 buffer allocation API wasn't great, but there's no reason to
make the server stop working with those drivers. This patch has the
X server adapting to the API provided by the driver, using the new API where
available and falling back to the old API as necessary. A warning will be
placed in the log file when the old API is in use.
Signed-off-by: Keith Packard <keithp@keithp.com>
Otherwise no subsequent driver will be able to claim this pci slot.
Example for this: fbdev tries to claim, but framebuffer device is not
available. Later on VESA cannot claim the device.
The number of input devices is MAXDEVICES, not MAX_DEVICES (f781a752e6)
Two comments updated to refer to MAXDEVICES.
MAX_FUNCS in sigio.c was set to 16 if MAX_DEVICES was undefined. If more
than 15 physical input devices were present, this could result in a
failure to install the SIGIO handler for any device above 15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GIT change
http://cgit.freedesktop.org/xorg/xserver/commit/?id=45c8bd0fe54273039fdaa1eeeafb81b5774f2c75
changed the default symbol visibility of the Xserver. As a result 2 symbols
that are needed by the RandR 1.2/1.3 implementation in the fglrx driver are no
longer visible:
xf86configptr
xf86CursorScreenKey
We would like to get these two symbols _X_EXPORT'ed before Xserver 1.7 is
released. Otherwise it will be problematic for fglrx to support RandR 1.3 on
Xserver 1.7.
In the future, we may want to sync our RandR implementation to later versions
of the RandR implementation in hw/xfree86/modes. Therefore it would be nice if
all symbols used by the Xserver RandR implementation were _X_EXPORT'ed in the
future.
Wrong check for inputInfo.pointer resulted in a SW cursor being rendered when
the pointer left the screen (in a Xinerama setup).
We must call the sprite rendering function if
- SW cursors are enabled, or
- The current device is not the VCP and not attached to the VCP.
Reported-by: Gordon Yuan <GordonYuan@viatech.com.cn>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously when compiling on freebsd amd64 we'd end up at xi86
block (line 1315) which would define mem_barrier and write_mem_barrier
to be NOP's. Instead they should be valid, as per the linux amd64 setup.
This stops the hangs experienced by many when using the nv driver
which would hang due to out of order dma requests as noticed in
http://bugs.freedesktop.org/show_bug.cgi?id=3168
Signed-off-by: Benjamin Close <Benjamin.Close@clearchain.com>
xf86vmode.c:1578: warning: pointer targets in passing argument 1 of
‘SwapShorts’ differ in signedness
../../../../include/misc.h:231: note: expected ‘short int *’ but argument is
of type ‘CARD16 *’
xf86vmode.c:1543: warning: unused variable ‘i’
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
You would think, having finally tightened down the spec, that
monitor vendors would bother to implement what the spec actually
mandates. You would be wrong.
crtc->funcs->lock is NULL, so it's no use calling it here. Move it down so
it's actually defined before we use it.
Introduced with 6f59a81600.
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
This moves code out of each implementation of set_mode_major and back into
the X server. The real feature here is that the transform is now available
in the crtc for use by either xf86CrtcRotate or whatever the driver wants to
do. Without this change, the transform was lost for drivers providing the
set_mode_major interface.
Note that users of this API will want to stop smashing the transformPresent
field, and could also stop setting mode/x/y/rotation for new enough X servers,
but there's no reason to make that change as it will break things when
running against older X servers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Doing so generates the same timings as given in the DMT spec for
120Hz RB, so we should be set there. Other rates might be legal
too but why push our luck.
If you have multiple cards, some that support randr 1.2 and some that don't
you can get a null dereference in here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make xf86 RANDR wrap the EnterVT call chain, so it can re-probe the
outputs when a laptop comes back from suspend/unsuspend (actually, any
time that we enter our VT again). The X server should then send RR*
events to clients, so they can cope with a monitor that was unplugged
while the laptop was suspended.
Signed-off-by: Federico Mena Quintero <federico@novell.com>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Many old monitors zero-fill the detailed descriptors, so check for that
to avoid a useless warning like:
(WW) RADEON(0): Unknown vendor-specific block 0
Historically, if no input device was referenced in the ServerLayout,
the server would pick the first "mouse" device found in the xorg.conf.
This patch gives evdev, synaptics, vmmouse and void the same status. If
there is a section in the config file using this driver - use it as the core
pointer.
Device selection is in driver-order, not in config-order. If a "mouse"
device is listed after a "synaptics" device, the "mouse" device gets
preference. This replicates the original behaviour.
This code only takes effect if AllowEmptyInput is off and there is no core
pointer in the server layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Aaron Zang
Alan Coopersmith
Matt Turner
Dave Airlie
Tiago Vignatti
Michel Dänzer
Oliver McFadden
Peter Hutterer
Adam Jackson
Keith Packard
Matthias Hopf
Felix Kuehling
Rémi Cardona
Ben Skeggs
Søren Sandmann Pedersen
Dave Airlie
Benjamin Close
Benjamin Defnet
Federico Mena Quintero
Matthieu Herrb