Inspired by Jon Turney's "Xwin: Simplify screen option processing"
patch, which does something similar for the Xwin server.
Besides making the code more readable, this eliminates most of Xvfb's
references to MAXSCREENS.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
The screen number can be inferred from the position in the vfbScreens
array, and it was only used in two places, so it was hardly important.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Several DDXes allow each screen to have at most one (or in some cases,
exactly one) installed colormap. These all use the same pattern: Declare
a global-lifetime array of MAXSCREENS ColormapPtrs, and index it by
screen number. This patch converts most of those to use screen privates
instead.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
While VT-switched, FB access is disabled and should remain so. Trying to switch
modes in that state would re-enable it, potentially causing crashes if trying
to access it before the driver has recovered from the mode switch.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This issue was introduced in the first dump of the code in 2004. I haven't
check what's the correct fix for it so I simply kept the behaviour of someone
calling this and removed the unreachable code.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
unifdef found some code covered by
which it decided to remove. This patch simply restores that in case
someone wants it back.
Signed-off-by: Keith Packard <keithp@keithp.com>
CLEARRTS_SUPPORT cannot be triggered at all. Notice that mouse driver manual
page states the support for it though.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Seems to be harmless. Meh.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
...because Error is a macro that returns NULL.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
The rationale behind is because no sane application will use this when we have
modern APIs such DRI2. Besides, as a fact, xfree86 server has already
deprecated this extension in 1998:
http://www.xfree86.org/3.3.6/isc7.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
The main motivation here is to have the resource system clean up the
DRI2 drawable automatically so glx doesn't have to. Right now, the
glx drawable resource must be destroyed before the X drawable, so that
calling DRI2DestroyDrawable doesn't crash. By making the DRI2
drawable a resource, GLX doesn't have to worry about that and the
resource destruction order becomes irrelevant.
https://bugs.freedesktop.org/show_bug.cgi?id=26394
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
High resolution devices was generating integer overflow.
For instance the wacom Cintiq 21UX has an axis value up to
87000. Thus the term (dSx * (Cx - Rxlow)) is greater than
MAX_INT32.
Using 64bits integer avoids such problem.
Signed-off-by: Philippe Ribet <ribet@cena.fr>
Signed-off-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes a crash in XIQueryDevice which calls strlen on a NULL pointer.
#0 strlen () at ../sysdeps/x86_64/strlen.S:31
#1 0x00000000004c16ed in SizeDeviceInfo (dev=0x969bd0)
at ../../Xi/xiquerydevice.c:204
#2 0x00000000004c1a01 in ProcXIQueryDevice (client=0xa57510)
at ../../Xi/xiquerydevice.c:98
Debian bug#575905 <http://bugs.debian.org/575905>
Reported-by: "Bernhard R. Link" <brlink@debian.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 8736d112af changed the priority
ordering of the InputClass option merging to be "last match wins". This
fixes the handling of Option "Ignore" to follow that logic.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
These drivers have been deactivated for over a year now, let's not refer
potential users to them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In addition to the conf files found in /etc/X11 or $sysconfdir/X11 used
for local administration, we also reserve a system directory for vendor
and package usage. The simple search path is:
/usr/share/X11/xorg.conf.d
$datadir/X11/xorg.conf.d
Files from these directories will have the lowest config priority. The
directory $datadir/X11/xorg.conf.d is exported from xorg-server.pc in
the variable "sysconfigdir". Packages should install their .conf files
to the directory specified by:
`pkg-config --variable=sysconfigdir xorg-server`
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no reason to carry all the oddities from xorg.conf like appended
hostname to the search path for xorg.conf.d. This changes it to something
very simple:
/etc/X11/<cmdline>
$sysconfdir/X11/<cmdline>
/etc/X11/xorg.conf.d
$sysconfdir/X11/xorg.conf.d
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Explain the "safe" path dance for -configdir, too.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We could just use $projectroot/etc and $projectroot/share, but the user
might have other plans for them.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes x86emu builds when using non-gnu compilers now that u64 is required
Before this fix, the u64 type would not be defined, causing
x86emu/sys.c to fail to build:
"sys.c", line 102: syntax error before or at: ldq_u
"sys.c", line 102: syntax error before or at: *
Since Keith requested using <stdint.h>, converted all the x86emu
typedefs to use the stdint types.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
vga arbiter will be locked in one device while AbortDDX will call LeaveVT
routines from the other device. Fail!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When doing driver autoconfiguration with some parts of the config file
present but no driver set (e.g. only input configuration) fix the case
that we may have multiple drivers to try.
Create a screen section for each driver and let them be tried in a row.
Signed-off-by: Ruediger Oertel <ro@suse.de>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Timo Aaltonen <timo.aaltonen@aalto.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
Export DDX swap control status from the DRI2 module and check for it in
GLX when initializing extensions.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
If a few swaps were queued leading to a throttle related block on the
client, and then the client submitted an MSC wait, one of the previous
swap wakeups could have caused the MSC wait to complete early. Add a
flag for this to prevent a swap wake from prematurely waking an MSC
waiter.
Reported-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Avoid a potential swapsPending underflow by incrementing it before
ScheduleSwap, which may complete it immediately. And be sure to
decrement it again in case the schedule failed.
Reported-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We need to throttle swaps here in addition to when the context is made
current to avoid causing problems with clients that just swap.
Throttling here also ensures our swaps get ordered as long as we block
the client occasionally.
Reported-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Update our supported DRI2 protocol version as each driver does
DRI2ScreenInit, since depending on available kernel features, each DDX
may support different callbacks and therefore protocol.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
A 0 swap interval means that swaps shouldn't be sync'd to vblank, so
just complete the swap immediately in that case.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Handle drawable destruction and lifetime correctly.
Check whether the drawable priv is valid in DRI2SwapInterval(),
DRI2WaitSBC() and DRI2WaitMSC(); it may have gone away, so be sure to
check it before using it.
If more than 1 outstanding swap is queued, we may complete several after
an app has exited. If we free it after the first one completes and the
refcount reaches 0, we'll crash the server on subsequent completions.
So delay freeing until all swaps complete and remove the error message
as this is a normal occurence. To do this properly, we must also avoid
destroying drawables in DRI2DestroyDrawable() if a swap or wait event is
pending.
And finally, make sure we free drawables in DRI2WaitMSCComplete() if
necessary (i.e. if the refcount has reached 0 and this MSC was the last
pending event on the object).
Reported-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Returns expected SBC after completion of swap to caller, as required by
OML_sync_control spec, instead of the last_swap_target value.
Passes target_msc, divisor, remainder, correctly for
glXSwapBuffersMscOML() call, while retaining old behaviour for simple
glXSwapBuffers() call.
An OML swap can have a 0 target_msc, which just means it needs to
satisfy the divisor/remainder equation. Pass this down to the driver as
needed so we can support it.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Jamey Sharp
Pierre-Loup A. Griffais
Tiago Vignatti
Keith Packard
Kristian Høgsberg
Benjamin Tissoires
Julien Cristau
Jeremy Huddleston
Dan Nicholson
Peter Hutterer
Alan Coopersmith
Ruediger Oertel
Jesse Barnes