Not supposed to be called by drivers, just internal to the randr extsnsion,
so shouldn't have been exported in the first place.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Not supposed to be called by any driver, just internal to the extension,
so shouldn't have been exported in the first place.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Those aren't used by any drivers and never should so, thus no need to
keep them exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Those aren't used by any drivers and never should so, thus no need to
keep them exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Those aren't used by any drivers and never should so, thus no need to
keep them exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Those aren't used by any drivers and never should so, thus no need to
keep them exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Those aren't used by any drivers and never should so, thus no need to
keep them exported.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Not called by anybody and been just a dummy for quite a while,
so no need to keep it around any longer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Over 1.5 decades ago, pixmap handling was moved to using pixman library,
but there's still a bit fallout from that left. Cleaning it up now.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1287>
This allows rrCrtcGetInfo to override the values in the XRRCrtcGetInfo
reply. One use case is to allow Xwayland to return the current emulated
mode for the specific client instead of the global mode.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Add a new interface to _rrScrPriv to make it possible for the server to
delay answering a lease request, at the cost of blocking the client. This
is needed for implementing drm-lease-v1, as the Wayland protocol has no
defined time table for responding to lease requests.
Signed-off-by: Xaver Hugl <xaver.hugl@gmail.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Since crtc can belong to secondary output that may not have present
extension enabled we should fallback to first enabled crtc or fake crtc.
Fix for issue xorg/xserver#1195
Instead of getting the current msc value from the window crtc,
which not exist take the last saved msc value saved in
the window_priv struct
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
This is a modified version of a patch we've been carry-ing in Fedora and
RHEL for years now. This patch automatically adds secondary GPUs to the
master as output sink / offload source making e.g. the use of
slave-outputs just work, with requiring the user to manually run
"xrandr --setprovideroutputsource" before he can hookup an external
monitor to his hybrid graphics laptop.
There is one problem with this patch, which is why it was not upstreamed
before. What to do when a secondary GPU gets detected really is a policy
decission (e.g. one may want to autobind PCI GPUs but not USB ones) and
as such should be under control of the Desktop Environment.
Unconditionally adding autobinding support to the xserver will result
in races between the DE dealing with the hotplug of a secondary GPU
and the server itself dealing with it.
However we've waited for years for any Desktop Environments to actually
start doing some sort of autoconfiguration of secondary GPUs and there
is still not a single DE dealing with this, so I believe that it is
time to upstream this now.
To avoid potential future problems if any DEs get support for doing
secondary GPU configuration themselves, the new autobind functionality
is made optional. Since no DEs currently support doing this themselves it
is enabled by default. When DEs grow support for doing this themselves
they can disable the servers autobinding through the servers cmdline or a
xorg.conf snippet.
Signed-off-by: Dave Airlie <airlied@gmail.com>
[hdegoede@redhat.com: Make configurable, fix with nvidia, submit upstream]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
---
Changes in v2:
-Make the default enabled instead of installing a xorg.conf
snippet which enables it unconditionally
Changes in v3:
-Handle GPUScreen autoconfig in randr/rrprovider.c, looking at
rrScrPriv->provider, rather then in hw/xfree86/modes/xf86Crtc.c
looking at xf86CrtcConfig->provider. This fixes the autoconfig not
working with the nvidia binary driver
Instead of having every video driver loop over any pending leases to
free them during CloseScreen, do this up in the DIX layer by
terminating leases when a leased CRTC or Output is destroyed and
(just to make sure), also terminating leases in RRCloseScreen. The
latter should "never" get invoked as any lease should be associated
with a resource which was destroyed.
This is required as by the time the driver's CloseScreen function is
invoked, we've already freed all of the DIX randr structures and no
longer have any way to reference the leases
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
Cc: Thomas Hellstrom <thellstrom@vmware.com>
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Tracks changes to the non-desktop property so that when non-zero,
outputs will always appear to be disconnected.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
RRChangeOutputProperty and RRConfigureOutputProperty should not modify
their parameters, and callers may want to pass pointers to fixed data,
so declare the value pointers as const in both cases.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows making the master screen's pixmap_dirty_list entries
explicitly reflect that we're now tracking the root window instead of
the screen pixmap, in order to allow Present page flipping on master
outputs while there are active slave outputs.
Define HAS_DIRTYTRACKING_DRAWABLE_SRC for drivers to check, but leave
HAS_DIRTYTRACKING_ROTATION defined as well to make things slightly
easier for drivers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
This is a preparation patch for adding prime hw-cursor support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Adds an output parameter to disable PRIME synchronization.
Output parameter is created when the user calls 'xrandr
--setprovideroutputsource <sink> <source>' to prevent polluting output
parameters of non-PRIME configurations.
Defaults to on, so if the user wants PRIME synchronization they don't need
to do anything.
If the user wishes to disable PRIME synchronization when they first set up
PRIME, they can run 'xrandr --output <output> --set "PRIME Synchronization"
0' after running 'xrandr --setprovideroutputsource <sink> <source>', but
before 'xrandr --auto'.
If the user wishes to enable or disable PRIME synchronization after PRIME has
already been set up, they can run 'xrandr --output <output> --set "PRIME
Synchronization" <0 or 1>' at any time, xrandr will trigger a modeset, which
will tear down and setup PRIME in the configuration they requested on CRTCs
associated with that output.
randrstr.h:
Add central definition of the output property name.
rrcrtc.c:
Add function rrGetPixmapSharingSyncProp() to query the status of the
output property.
Add function rrSetPixmapSharingSyncProp() to set the output property.
Add 'sync' parameter to rrSetupPixmapSharing(), which when false will
use single buffering even if the required ABI functions are supported.
Changes rrSetupPixmapSharing() to only report an error if falling back
to single buffering when the user requested synchronization.
Change RRCrtcSet() to use rrPixmapSharingSyncProp() to query the status
of the output property and feed it into rrSetupPixmapSharing() using
the 'sync' parameter.
rrprovider.c:
Add RR(Init/Fini)PrimeSyncProps(), functions to create and destroy the
PRIME synchronization output property.
Add a call to RRInitPrimeSyncProps() in
ProcRRSetProviderOutputSource(), such that the output property is
created when the user requests PRIME.
Add a call to RRFiniPrimeSyncProps() in RRProviderDestroy().
v1: Initial commit
v2: Unchanged
v3: Add /* TODO */ for handling different sources with different outputs
Make rrSetupPixmapSharing() set the output property to 0 if it has to fall
back, to avoid user confusion.
Make rr(Get)PixmapSharingSyncProp() check the current value if there isn't a
pending value
v4: Unchanged
v5: Unchanged
v6: Rebase onto ToT
v7: Unchanged
Signed-off-by: Alex Goins <agoins@nvidia.com>
Changes PRIME to use double buffering and synchronization if all required
driver functions are available.
rrcrtc.c:
Changes rrSetupPixmapSharing() to use double buffering and
synchronization in the case that all required driver functions are
available. Otherwise, falls back to unsynchronized single buffer.
Changes RRCrtcDetachScanoutPixmap() to properly clean up in the case of
double buffering.
Moves StopPixmapTracking() from rrDestroySharedPixmap() to
RRCrtcDetachScanoutPixmap().
Changes RRReplaceScanoutPixmap() to fail if we are using double buffering,
as it would need a second ppix parameter to function with double buffering,
and AFAICT no driver I've implemented double buffered source support in uses
RRReplaceScanoutPixmap().
randrstr.h:
Adds scanout_pixmap_back to struct _rrCrtc to facilitate PRIME
double buffering.
xf86Crtc.h:
Adds current_scanout_back to _xf86Crtc to facilitate detection
of changes to it in xf86RandR12CrtcSet().
xf86RandR12.c:
Changes xf86RandR12CrtcSet() to detect changes in
scanout_pixmap_back.
Adds scanout_pixmap_back to struct _rrCrtc to facilitate PRIME double
buffering.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and
(rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec
Add fallback if flipping funcs fail
v4: Detach scanout pixmap when destroying scanout_pixmap_back, to avoid
dangling pointers in some drivers
v5: Disable RRReplaceScanoutPixmap for double-buffered PRIME, it would need an
ABI change with support for 2 pixmaps if it were to be supported, but AFAICT
no driver that actually supports double-buffered PRIME uses it.
Refactor to use rrEnableSharedPixmapFlipping() as a substitute for
rrCrtcSetScanoutPixmap() in the flipping case.
Remove extraneous pSlaveScrPriv from DetachScanoutPixmap()
Remove extraneous protopix and pScrPriv from rrSetupPixmapSharing()
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
Adds typedefs for (*RRStartFlippingPixmapTrackingProcPtr),
(*RREnableSharedPixmapFlippingProcPtr),
and (*RRDisableSharedPixmapFlippingProcPtr) in randrstr.h.
Adds typedefs for (*PresentSharedPixmapProcPtr),
(*SharedPixmapNotifyDamageProcPtr),
(*RequestSharedPixmapNotifyDamageProcPtr), and
(*StopFlippingPixmapTrackingProcPtr) in scrnintstr.h.
Adds RR(Enable/Disable)SharedPixmapFlipping, and
RRStartFlippingPixmapTracking to rrScrnPrivRec.
Adds StopFlippingPixmapTracking, PresentSharedPixmap,
SharedPixmapNotifyDamage, and RequestSharedPixmapNotifyDamage to ScreenRec.
rrScrnPrivRec used for functions that use RandR-private data types, and
ScreenRec used for the rest.
RREnableSharedPixmapFlipping will allow the sink driver to setup for
flipping between two shared pixmaps.
RRDisableSharedPixmapFlipping will allow the sink driver to do teardown
associated with flipping between two shared pixmaps.
(RRStart/Stop)FlippingPixmapTracking are merely the double-buffered
equivalents of (Start/Stop)PixmapTracking, allowing the source driver to do
whatever setup and teardown necessary for presenting on the two shared
pixmaps.
PresentSharedPixmap is a function exposed by the source driver for the X
server or sink driver to call to request a present on a given shared
pixmap. This way, presents can be driven by the sink's vblank instead of a
timer or similar mechanism.
SharedPixmapNotifyDamage and RequestSharedPixmapNotifyDamage are OPTIONAL
(even for double-buffered PRIME) functions exposed by the sink driver and
the source driver, respectively. By calling
master->RequestSharedPixmapNotifyDamage(ppix), the sink driver can request
for the source driver to call slave->SharedPixmapNotifyDamage(ppix) in
response to damage on the master screen pixmap tracked by ppix.
v1: Initial commit
v2: Rename PresentTrackedFlippingPixmap to PresentSharedPixmap
Add SharedPixmapNotifyDamage / RequestSharedPixmapNotifyDamage
v3: Add RRCrtcPtr as a parameter to StartFlippingPixmapTracking
Move functions that use RandR-private data types to rrScrnPrivRec.
v4: Unchanged
v5: Add front and back parameters to RREnableSharedPixmapFlippingProcPtr
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
This creates an automatic monitor for a tiled monitor at startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Enrico Weigelt, metux IT consult
Minh Phan
Xaver Hugl
Łukasz Spintzyk
Dave Airlie
Keith Packard
Michel Dänzer
Hans de Goede
agoins
Adam Jackson