Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Previously, the input tests were working up to sizeof(mask) * 8, which
could be more than the arrays; the latter only being sized as
MAX_VALUATORS.
Hypothetically, if you were switching the stored valuator values to
double instead of uint32_t, and you attempted to set the 39th member of
a MAX_VALUATORS-sized (36) array, you'd probably end up smashing
ev->key_repeat into oblivion and then tripping the check for invalid
flags because you haven't yet put XIPointerEmulated into the valid flags
for XI_Motion. Probably.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Similar to how we link Xorg, make sure that whenever any of the
component libraries changes, we relink libxservertest and the tests.
Not much use testing anything other than the actual source in your tree.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
libxorg.la served to collect all the Xorg convenience libraries into one
massive archive to link into Xorg. This made things easy for symbol
resolution, but it tremendously slowed down the build since each change
caused libxorg.la to be rebuilt. This is an extremely slow process of
extracting all the objects from the sub-libraries and recombining them.
Instead, the archives are linked directly into Xorg. The order of the
libraries had to be tweaked a bit to make symbols resolve correctly with
the lower level code moving later in the link command.
As a side effect, since the dtrace objects are now being linked
directly into Xorg, we don't need the SPECIAL_DTRACE_OBJECTS hack to
add them twice.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
The symbols in sdksyms.c cover the entire source tree. In order to make
them resolve when libxorg.la goes away, move the objects from libloader
to Xorg. Unfortunately, this means sdksyms needs to get built again for
the test code.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
When an empty _SOURCES variable is declared, automake will recognize that
only linking is needed.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Refactor to follow the pattern one Makefile, one .gitignore
where needed.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
X.Org Bug 37801 <http://bugs.freedesktop.org/show_bug.cgi?id=37801>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
i386 is one of the few architectures that doesn't need double alignment.
X.Org Bug 36986 <http://bugs.freedesktop.org/show_bug.cgi?id=36986>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Implements pointer barriers as specified by version 5 of the XFIXES
protocol. Barriers are axis-aligned, zero-width lines that block pointer
movement for relative input devices. Barriers may block motion in either
the positive or negative direction, or both.
v3:
- Fix off-by-one in version_requests array
- Port to non-glib test harness
- Fix review notes from Søren Sandmann Pedersen, add tests to match
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Compare two version numbers in the major.minor form.
Switch the few users of manual version switching over to the new function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
The few features from the glib test suite we used can be replaced with
assert and printf. This patch is a simple replacement for these two
g_assert → assert
g_test_message → printf
g_test_init is removed and so is g_test_bug_base. g_test_run replaced with a
simple return 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
commit 678f5396c9 only fixed the
initialization, not the copy. After a slave device change, the valuator
were out of alignment again.
X.Org Bug 36119 <http://bugs.freedesktop.org/show_bug.cgi?id=36119>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Catch compiler errors that were otherwise only spotted on make check.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
A handful of modules have begun adding unit test programs.
These macros will help providing a consistent interface which will
help package builders and developers to manage the functionality.
XORG_ENABLE_UNIT_TESTS will turn on/off unit testing, regardless
of how it is implemented. The default (yes/no) can be specified by each
module. It can be used by itself if glib or -wrap support is not needed.
XORG_WITH_GLIB will probe the system for glib-2.0. A different version
can be specified in each module. It will consult XORG_ENABLE_UNIT_TESTS
but can be used by itself in contexts other then unit testing.
The default (yes/no) can be specified by each module.
XORG_LD_WRAP will probe the linker for -wrap support. It will consult
XORG_ENABLE_UNIT_TESTS but can be used by itself in contexts
other then unit testing.
configure options:
--enable-unit-tests Enable building unit test cases (default: auto)
--with-glib Use GLib library for unit testing (default: auto)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This has less purpose as a test but more as documentation on how to actually
use the differnent list calls.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The removal of the double-use will cause some suble bugs as some conditions
to check for the dev->u.master case were broken and also evaluated as true
if lastSlave was set (instead of master).
Also breaks the input ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
Don't test everything, but hey, life is short and I'm trying to have one.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Some event types (notably Expose and GraphicsExpose) require multiple
events, a la XI 1.x. Bring the EventToCore API in line with EventToXI's
and allow it to generate multiple events.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Expecting the caller to free the mask requires us to keep it in a single
memory block (which may be an issue lateron), aside from leaving the API
asymetrical. Provide valuator_mask_free() to free the memory and reset the
mask pointer to NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
When building against a newer inputproto, the server may support fewer
than XI_LASTEVENT events. We already have XI2LASTEVENT for the highest
event number supported by the server, so use that instead.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Add initial validation of acceptable flags for XI2 device events, and
make sure they're swapped.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
We have quite a few tests which involve checking that EventToCore fails
for specific events, so refactor them into a separate function.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Simply returning the mask bit breaks checks like
BitIsOn(mask, 0) != BitIsOn(mask, 1);
as used in 048e93593e.
The naming of this macro suggests that it should return boolean values
anyway. This patch also adds a few simple tests for these macros to make
sure they don't accidentally break in the future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pat Kane <pekane52@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Byte padding and conversion is interesting for the rage of 0-8 bytes, and
then interesting towards the end of the valid range (INT_MAX - 7 and INT_MAX
- 3).
Note: this changes the upper range for pad_to_int32() and bytes_to_int32()
from the previous (INT_MAX - 4) to (INT_MAX - 3).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
We calculate the expected bytes for each value, let's use it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Otherwise, building fails with CFLAGS="-Wall -Werror" this way:
| protocol-common.c: In function ‘init_simple’:
| protocol-common.c:159: error: implicit declaration of function ‘XkbInitPrivates’
| protocol-common.c:159: error: nested extern declaration of ‘XkbInitPrivates’
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We have per-axis mode now. For those bits that still need it (XI 1.x),
assume that the first axis holds the device's mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Commit de8be07cc0 adds a requirement to
event to core conversion that at least one of the X or Y valuators are
set in the valuator mask. This commit fixes the event conversion test to
be compliant.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:
MatchUSBID "046d:*"
The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:
MatchPnPID "WACf*"
A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The internals of XTest are used by Xi and Xkb, and both Xi and Xkb are
always required, so it makes little sense to have XTest place data in
a devPrivate, especially a devPrivate which is only available when the
XTest extension is enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make sure all of the private keys used by the test code are
initialized before being used.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Robert Hooker <sarvatt@ubuntu.com>
Just some extra clarification as pointed out by Dan Nicholson,
and that memcpy should have been a memcmp.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
No special memory handling is used to give drivers the maximum flexibility
with the data. Drivers should be able to call realloc on the product string
if needed and perform similar operations.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
XInputExtensionInit calls MakeAtom, which doesn't work without the atoms
table initialized.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Running "make check" will lead to build problems in
scratchbox. Building the first test that wraps dixLookupWindow fails
because symbol __real_dixLookupWindow can't be resolved. Defining
wrapping options as linker options instead of compiler options makes
everything build nicely in scratchbox.
Signed-off-by: Rami Ylimäki <ext-rami.ylimaki@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bizarre. This seems to never be used before. I left the field in ScreenInfo,
with another name. So, stop looking at it.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Matt Turner
Daniel Stone
Dan Nicholson
Gaetan Nadon
Peter Hutterer
Adam Jackson
Nicolas Kaiser
Cyril Brulebois
Chase Douglas
Jeremy Huddleston
Keith Packard
Jamey Sharp
Mikhail Gusarov
Rami Ylimäki
Tiago Vignatti