Currently, Xwayland assigns sequential output names for XRandR. When an
output is hotplugged, a new name is assigned sequentially (XWAYLAND0,
XWAYLAND1, etc.). This is a problem because if a monitor is unplugged
and plugged again, it will get a new name each time.
Luckily, xdg-output provides us with a name for the outputs.
Even though the protocol states that the name is not a reflection of the
underlying DRM connector name, it is to remain consistent across
sessions with the same hardware and software configuration.
So we could use the xdg-output name for the XRandR reported name for the
output.
Doing so is a bit tricky though, because the output name is set at
creation and is not supposed to change. The xdg-output event that
provides us with the name will come at a later time.
So we just allocate a default fixed size for the output name at creation
and just replace the default output name with the xdg-output name when
that is known.
Also, historically, some X11 clients were expecting output names in
Xwayland to be named XWAYLAND<x> and used that to check whether they
were running on Xwayland. Those clients should now use the Xwayland X11
extension which is designed specifically for that purpose.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1353
See-also: https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/954
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Since commit 204f10c2, we notify XRandR clients that the randr
configuration has changes as soon as an new output is created.
Yet, this might be premature, considering that at that point, we are
still to receive the wl_output and xdg-output events that will most
likely change the setup.
So instead of calling RRTellChanged() from xwl_output_create(), wait
until we get to call apply_output_change(), which occurs after the done
events from both xdg-output and wl_output are received.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Leasable displays do not have any actual associated Wayland output and
are not available to regular X11 clients and left entirely to the
application who requests the lease.
As these are not actually managed by the Wayland compositor and left
entirely to the "lessee" application, the viewporter protocol required
for the XRandR emulation is not usable on such devices.
We should therefore not advertise the XRandR emulated modes for those
leasable displays.
This also solves a problem with implementations of glXGetMscRateOML()
which is used notably by Chromium/Electron. Applications using this
which will begin lagging/stuttering exponentially over
time, trying to look up a non-existent mode with 0x0 as returned by
XF86VidModeGetModeLine() with XRandR emulation for such devices.
See-also: https://github.com/labwc/labwc/issues/553
Signed-off-by: Joshua Ashton <joshua@froggi.es>
This fixes an issue with GLFW-based games failing to set the resolution
when the user request to switch back to the native display mode.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
When updating the overall screen size, Xwayland would first walk the
window tree then update both the xwl_screen and screen size.
As a result, if any ResizeWindow() handler tries to use the xwl_screen
size, it would get the old (wrong) size instead of the new one.
Make sure to update the xwl_screen size first, prior to traverse the
window tree.
This is preparation work for Xwayland fullscreen mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a convenient function to get the xwl_output from a given wl_output.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When running rootless as well as rootful, Xwayland gets its outputs
configuration from the Wayland compositor.
When running rootful, it means that we end up with a large black
surface the size of all monitors combined, that's not very convenient
and there is no way for set the desired size of the Xwayland window.
Add a new command line option "-geometry" to force a specific mode when
running rootful for the user to specify the root window size to use for
Xwayland.
That option has no effect when Xwayland is running rootless.
v2: Not using libxcvt as the mode may not be a valid CVT mode.
v3: Add a set of XRandR modes and the RR hooks to make that work.
Update the man page for Xwayland.
v4: Add RandR 1.0 support for older clients
v5: Fix XVidMode failing with a BadMatch
v6: Add a separate xwl_output specifically for fixed mode, instead of
using the existing output list - that will allow for further
improvements like a fullscreen mode eventually.
v7: Sort the RR modes
v8: Fix RandR 1.0
v9: Add physical size
v10: Cleanup
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1338
update_screen_size() takes an xwl_output argument, mostly for historical
reasons, whereas it actually applies to a screen (as its name implies).
Reshuffle the code to take an xwl_screen instead, in preparation for
the geometry mode in Xwayland - No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland uses an output serial number it increments each time a new
Wayland output is added.
On server regeneration, that static value is not cleared, and therfore
the output numbers keep increasing each time the Xserver restarts.
To avoid that issue, make the output serial part of the xwl_screen,
which gets recreated on server regeneration, so that index is reset to 0
automatically on server regeneration.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The function xwl_output_remove() is called when removing a monitor, but
the actual status of the RandR output does not change.
So, when RRTellChanged() is called from update_screen_size(), it won't
have the output connection status up to date in the RandR event
RROutputChangeNotifyEvent and X11 applications relying on that event
like Qt will fail to emit their signal QGuiApplication::screenRemoved.
To avoid that issue, make sure to mark the RandR output as disconnected
prior to call xwl_output_remove().
Fix commit 204f10c29 ("xwayland: Call RRTellChanged if the RandR configuration may have changed")
Signed-off-by: zhoulei <zhoulei@kylinos.cn>
Signed-off-by: Morose <chenlinxiang@kylinos.cn>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Adds a -force-xrandr-emulation cmdline switch that always exposes extra
modes when viewporter isn't exposed by the Wayland compositor.
Having the additional modes exposed by the X server is important for
games to function and be configured
Compositors, such as Gamescope (the compositor for Steam Deck),
support only a single window that is rendered in the centre of the
screen that is scaled up to fill the screen by the compositor based
on some user scaling settings.
Exposing viewporter, wouldn't make sense here, and could mislead native
Wayland clients, so exposing dummy modesets in X is preferred here.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Adds the following 16:10 modes primarily for scaling up on Steam Deck:
- 1152x720
- 960x600
- 928x580
- 800x500
- 768x480
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Xwayland does not change the actual XRANDR setup for real, it just
emulates the resolution changes using viewports in Wayland.
With a single output, if an X11 applications tries to change the CRTC
back to the native mode, RRCrtcSet() will simply ignore the request as
no actual change is induced by this.
Set the property "RANDR Emulation" on all Xwayland outputs to make sure
the optimizations in RRCrtcSet() get skipped and Xwayland can receive
and act upon the client request.
Also make sure we do not allow that property to be changed by X11
clients.
v2: Prevent X11 clients from changing the property value
(Pekka Paalanen <pekka.paalanen@collabora.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1305
This commit allows X11 clients running through Xwayland to lease
non-desktop connectors from the Wayland compositor by implementing
support for drm-lease-v1.
In order to not deadlock with the Wayland compositor if its response
to a lease request is delayed, the new interface in _rrScrPriv
introduced in the last commit is used, which makes it possible to
block the X11 client while a response is pending.
Leasing normal outputs is not yet supported, all connectors offered
for lease will be advertised as non-desktop.
Co-authored-by: Xaver Hugl <xaver.hugl@gmail.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Some clients (typically Java, but maybe others) rely on ConfigureNotify
or RRScreenChangeNotify events to tell that the XRandR request is
successful.
When emulated XRandR is used in Xwayland, compute the emulated root size
and send the expected ConfigureNotify and RRScreenChangeNotify events
with the emulated size of the root window to the asking X11 client.
Note that the root window size does not actually change, as XRandR
emulation is achieved by scaling the client window using viewports in
Wayland, so this event is sort of misleading.
Also, because Xwayland is using viewports, emulating XRandR does not
reconfigure the outputs location, meaning that the actual size of the
root window which encompasses all the outputs together may not change
in a multi-monitor setup. To work around this limitation, when using an
emulated mode, we report the size of that emulated mode alone as the
root size for the configure notify event.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This makes sure RandR events are sent to interested clients as needed.
This was happening implicitly in some cases, but not in others, e.g. if
the root window size didn't change.
If this were to call RRTellChanged more often than necessary in some
cases, that should be harmless, as it only sends events if something
has actually changed since last time.
Should fix https://bugzilla.redhat.com/show_bug.cgi?id=1979892 .
v2:
* Call RRTellChanged at the very end of update_screen_size, just in
case.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
The need_rotate variable is only used once anymore and had semantics which lead
to errors in the past. In particular when negated we are dealing with a double
negation.
The variable gets replaced with a simple check on the xdg-output directly.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
This reverts commit 427f8bc009.
When receiving an output update for the mode size we need to rotate the stored
width and height values if and only if we have an xdg-output for this output
since in this case the stored values describe the output's size in logical
space, i.e. rotated.
The here reverted commit made a code change with which we would not rotate though
when an xdg-output was available since in this case the need_rotate variable was
set to False what caused in the check afterwards the first branch to execute.
That is just a small style-change to the output_get_new_size function. The
function before did take first the height and then the width argument, what
is unusual since resolutions are normally named the other way around, for
example 1920x1080. Also compare the update_screen_size function.
Therefore change the order of arguments for output_get_new_size.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
We can just read out the xdg_output field of the provided xwl_output to check
if a rotation is necessary or not.
This makes the function easier to understand. Additionally some documentation
is added.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
The way Xwayland works (like all Wayland clients), it first queries the
Wayland registry, set up all relevant protocols and then initializes its
own structures.
That means Xwayland will get the Wayland outputs from the Wayland
compositor, compute the physical size of the combined outputs and set
the corresponding Xwayland screen properties accordingly.
Then it creates the X11 screen using fbScreenInit() but does so by using
a default DPI value of 96. That value is used to set the physical size
of the X11 screen, hence overriding the value computed from the actual
physical size provided by the Wayland compositor.
As a result, the DPI computed by tools such as xdpyinfo will always be
96 regardless of the actual screen size and resolution.
However, if the Wayland outputs get reconfigured, or new outputs added,
or existing outputs removed, Xwayland will recompute and update the
physical size of the screen, leading to an unexpected change of DPI.
To avoid that discrepancy, use a fixed size DPI (defaults to 96, and can
be set using the standard command lime option "-dpi") and compute a
physical screen size to match that DPI setting.
Note that only affects legacy core protocols, X11 clients can still get
the actual physical output size as reported by the Wayland compositor
using the RandR protocol, which also allows for the size to be 0 if the
size is unknown or meaningless.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/731
Since the recent fix to call xwl_output_set_window_randr_emu_props() from
ensure_surface_for_window(), it is now only called on a toplevel window,
so the is-toplevel check is not necessary for the
xwl_output_set_window_randr_emu_props() case.
This commit moves the check to xwl_output_set_randr_emu_prop_callback()
so that we only do it when we are walking over all Windows of a client
to update the property on a change of the emulated resolution.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The code building the mode-list does the following to deal with screen
rotation:
if (need_rotate || xwl_output->rotation & (RR_Rotate_0 | RR_Rotate_180)) {
mode_width = xwl_output->width;
mode_height = xwl_output->height;
} else {
mode_width = xwl_output->height;
mode_height = xwl_output->width;
}
This means we need to do something similar in xwl_output_set_emulated_mode()
to determine if the mode being set is the actual (not-emulated) output mode
and we this should remove any emulated modes set by the client.
All callers of xwl_output_set_emulated_mode always pass a mode pointer
to a member of xwl_output->randr_output->modes, so we do not need to
duplicate this code, instead we can simply check that the passed in mode
is modes[0] which always is the actual output mode.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Now that each source and header should be in order, we can safely cleaup
the last remaining bits from the main `xwayland.h` which is not needed
anymore and can be removed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland CVT declaration to its own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move Xwayland screen related code to a separate source file and header.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move the Xwayland output declarations to their own header file.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Over time, Xwayland main source file `xwayland.c` has grown in size
which makes it look cluttered and harder to read.
Move the code dealing with Xwayland window to its own source and header
files.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Apps using randr to change the resolution when going fullscreen, in
combination with _NET_WM_STATE_FULLSCREEN to tell the window-manager (WM)
to make their window fullscreen, expect the WM to give the fullscreen window
the size of the emulated resolution as would happen when run under Xorg (*).
We need the WM to emulate this behavior for these apps to work correctly,
with Xwaylands resolution change emulation. For the WM to emulate this,
it needs to know about the emulated resolution for the Windows owning
client for each monitor.
This commit adds a _XWAYLAND_RANDR_EMU_MONITOR_RECTS property, which
contains 4 Cardinals (32 bit integers) per monitor with resolution
emulation info. Window-managers can use this to get the emulated
resolution for the client and size the window correctly.
*) Since under Xorg the resolution will actually be changed and after that
going fullscreen through NET_WM_STATE_FULLSCREEN will size the window to
be equal to the new resolution.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for per client randr-resolution change emulation using viewport,
for apps which want to change the resolution when going fullscreen.
Partly based on earlier work on this by Robert Mader <robert.mader@posteo.de>
Note SDL2 and SFML do not restore randr resolution when going from
fullscreen -> windowed, I believe this is caused by us still reporting the
desktop resolution when they query the resolution. This is not a problem
because when windowed the toplevel window size includes the window-decorations
so it never matches the emulated resolution.
One exception would be the window being resizable in Windowed mode and the
user resizing the window so that including decorations it matches the
emulated resolution *and* the window being at pos 0x0. But this is an
extreme corner case. Still I will submit patches upstream to SDL2
and SFML to always restore the desktop resolution under Xwayland,
disabling resolution emulation all together when going windowed.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for storing per output randr/vidmode emulated resolution
into the per client data.
Since we do not have a free/delete callback for the client this uses
a simple static array. The entries are tied to a specific output by the
server_output_id, with a server_output_id of 0 indicating a free slot
(0 is the "None" Wayland object id).
Note that even if we were to store this in a linked list, we would still
need the server_output_id as this is *per client* *per output*.
This is a preparation patch for adding randr/vidmode resolution
change emulation.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds the RandR 1.2 interface to xwayland and allows modes
advertised by the compositor to be set in an undistructive manner.
With this patch, applications that try to set the resolution will usually
succeed and work while other apps using the same xwayland
instance are not affected at all.
The RandR 1.2 interface will be needed to implement fake-mode-setting and
already makes applications work much cleaner and predictive when a mode
was set.
[hdegoede@redhat.com: Make crtc_set only succeed if the mode matches
the desktop resolution]
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for adding support for apps which want to
change the resolution when they go fullscreen because they are hardcoded
to render at a specific resolution, e.g. 640x480.
Follow up patches will fake the mode-switch these apps want by using
WPviewport to scale there pixmap to cover the entire output.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds support for xdg-output-unstable-v1 version 3, added in [1].
This new version deprecates zxdg_output_v1.done and replaces it with
wl_output.done. If the version is high enough, there's no need to wait for both
an xdg_output.done event and a wl_output.done event -- we only care about
wl_output.done.
[1]: 962dd53537
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
There's not really a good way to query this from the wayland server, so
just set the maximum to the X11 protocol limits. While we're at it,
lower the minimum screen size to something implausibly small too, just
in case.
Fixes: xorg/xserver#850
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Running Xwayland non-rootless and resizing the output would lead to a
crash while trying to update the larger areas of the root window.
Make sure we resize the backing pixmap according to the new output size
to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/834
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
xwl_output->randr_crtc is used in the update_screen_size() function :
==5331== Invalid read of size 4
==5331== at 0x15263D: update_screen_size (xwayland-output.c:190)
==5331== by 0x152C48: xwl_output_remove (xwayland-output.c:413)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
==5331== by 0x27574B: Dispatch (dispatch.c:421)
==5331== by 0x279945: dix_main (main.c:276)
==5331== Address 0x1aacb5f4 is 36 bytes inside a block of size 154 free'd
==5331== at 0x48369EB: free (vg_replace_malloc.c:530)
==5331== by 0x1F8AE8: RROutputDestroyResource (rroutput.c:421)
==5331== by 0x29A2AC: doFreeResource (resource.c:880)
==5331== by 0x29AE5B: FreeResource (resource.c:910)
==5331== by 0x152BE0: xwl_output_remove (xwayland-output.c:408)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== Block was alloc'd at
==5331== at 0x48357BF: malloc (vg_replace_malloc.c:299)
==5331== by 0x1F93E0: RROutputCreate (rroutput.c:83)
==5331== by 0x152A75: xwl_output_create (xwayland-output.c:361)
==5331== by 0x14BE59: registry_global (xwayland.c:764)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
The logical size is the size of the output in the global compositor
space. The mode width/height should be scaled as in the logical
size, but shouldn't be transformed. Thus we need to rotate back
the logical size to be able to use it as the mode width/height.
This fixes issues with pointer input on transformed outputs.
Signed-Off-By: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Make xwl_output_get_xdg_output() private, it doesn't need to be
available elsewhere.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
When xdg_output support was added to Xwayland, need_rotate parameter was
added to output_get_new_size where true gave you the old pre-xdg_output
behavior and false gave the new behavior. Unfortunately, the two places
where this is called, need_rotate was set backwards. This caused input
get clampped to the wrong dimensions. Also, the logic for deciding
whether or not to flip was wrong because, if need_rotate was false, it
would always flip which is not what you want.
v2 (Daniel Stone):
- Fix output_get_new_size so that it doesn't flip the dimensions when
need_rotate is false.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
The xdg-output protocol aims at describing outputs in way which is
more in line with the concept of an output on desktop oriented systems.
For now it just features the position and logical size which describe
the output position and size in the global compositor space.
This is however much useful for Xwayland to advertise the output size
and position to X11 clients which need this to configure their surfaces
in the global compositor space as the compositor may apply a different
scale from what is advertised by the output scaling property (to achieve
fractional scaling, for example).
This was added in wayland-protocols 1.10.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This fixes grabs on InputOnly windows whose parent is the root window
failing with GrabNotViewable. This is due to window->borderSize/windowSize
being computed as clipped by its parent, resulting in a null region.
Setting up the right size on the root window makes the InputOnly size
correct too, so the GrabNotViewable paths aren't hit anymore.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Be more precise in describing the return value.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously, we would swap the width/height of the Xwayland output based
on the output rotation, so that the overall screen size would match the
actual rotation of each output.
Problem is the RandR's ConstrainCursorHarder() handler will also apply
the output rotation, meaning that when the output is rotated, the
pointer will be constrained within the wrong dimension.
Moreover, XRandR assumes the original output width/height are unchanged
when the output is rotated, so by changing the Xwayland output width and
height based on rotation, Xwayland causes XRandr to report the wrong
output sizes (an output of size 1024x768 rotated left or right should
remain 1024x768, not 768x1024).
So to avoid this issue and keep things consistent between Wayland and
Xwayland outputs, leave the actual width/height unchanged but apply the
rotation when computing the screen size. This fixes both the output size
being wrong in "xrandr -q" and the pointer being constrained in the
wrong dimension with rotated with weston.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If the Wayland compositor sets a rotation on the output, Xwayland
translates the transformation as an xrandr rotation for the given
output.
However, if the rotation is not supported by the CRTC, this is not
a valid setup and xrandr queries will fail.
Pretend we support all rotations and reflections so that the
configuration remains a valid xrandr setup.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99663
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The definition by the manual is:
calloc(size_t nmemb, size_t size)
Swap the arguments of calloc() calls to be the right way around.
Presumably this makes no functional difference, but better follow the
spec.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
At shutdown, the Xserver will free all its resources which includes the
RRCrtc and RROutput created.
Xwayland would do the same in its xwl_output_destroy() called from
xwl_close_screen(), leading to a double free of existing RRCrtc
RROutput:
Invalid read of size 4
at 0x4CDA10: RRCrtcDestroy (rrcrtc.c:689)
by 0x426E75: xwl_output_destroy (xwayland-output.c:301)
by 0x424144: xwl_close_screen (xwayland.c:117)
by 0x460E17: CursorCloseScreen (cursor.c:187)
by 0x4EB5A3: AnimCurCloseScreen (animcur.c:106)
by 0x4EF431: present_close_screen (present_screen.c:64)
by 0x556D40: dix_main (main.c:354)
by 0x6F0D290: (below main) (in /usr/lib/libc-2.24.so)
Address 0xbb1fc30 is 0 bytes inside a block of size 728 free'd
at 0x4C2BDB0: free (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4CCE5F: RRCrtcDestroyResource (rrcrtc.c:719)
by 0x577541: doFreeResource (resource.c:895)
by 0x5787B5: FreeClientResources (resource.c:1161)
by 0x578862: FreeAllResources (resource.c:1176)
by 0x556C54: dix_main (main.c:323)
by 0x6F0D290: (below main) (in /usr/lib/libc-2.24.so)
Block was alloc'd at
at 0x4C2CA6A: calloc (in
/usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4CC6DB: RRCrtcCreate (rrcrtc.c:76)
by 0x426D1C: xwl_output_create (xwayland-output.c:264)
by 0x4232EC: registry_global (xwayland.c:431)
by 0x76CB1C7: ffi_call_unix64 (in /usr/lib/libffi.so.6.0.4)
by 0x76CAC29: ffi_call (in /usr/lib/libffi.so.6.0.4)
by 0x556CEFD: wl_closure_invoke (connection.c:935)
by 0x5569CBF: dispatch_event.isra.4 (wayland-client.c:1310)
by 0x556AF13: dispatch_queue (wayland-client.c:1456)
by 0x556AF13: wl_display_dispatch_queue_pending
(wayland-client.c:1698)
by 0x556B33A: wl_display_roundtrip_queue (wayland-client.c:1121)
by 0x42371C: xwl_screen_init (xwayland.c:631)
by 0x552F60: AddScreen (dispatch.c:3864)
And:
Invalid read of size 4
at 0x522890: RROutputDestroy (rroutput.c:348)
by 0x42684E: xwl_output_destroy (xwayland-output.c:302)
by 0x423CF4: xwl_close_screen (xwayland.c:118)
by 0x4B6377: CursorCloseScreen (cursor.c:187)
by 0x539503: AnimCurCloseScreen (animcur.c:106)
by 0x53D081: present_close_screen (present_screen.c:64)
by 0x43DBF0: dix_main (main.c:354)
by 0x7068730: (below main) (libc-start.c:289)
Address 0xc403190 is 0 bytes inside a block of size 154 free'd
at 0x4C2CD5A: free (vg_replace_malloc.c:530)
by 0x521DF3: RROutputDestroyResource (rroutput.c:389)
by 0x45DA61: doFreeResource (resource.c:895)
by 0x45ECFD: FreeClientResources (resource.c:1161)
by 0x45EDC2: FreeAllResources (resource.c:1176)
by 0x43DB04: dix_main (main.c:323)
by 0x7068730: (below main) (libc-start.c:289)
Block was alloc'd at
at 0x4C2BBAD: malloc (vg_replace_malloc.c:299)
by 0x52206B: RROutputCreate (rroutput.c:84)
by 0x426763: xwl_output_create (xwayland-output.c:270)
by 0x422EDC: registry_global (xwayland.c:432)
by 0x740FC57: ffi_call_unix64 (unix64.S:76)
by 0x740F6B9: ffi_call (ffi64.c:525)
by 0x5495A9D: wl_closure_invoke (connection.c:949)
by 0x549283F: dispatch_event.isra.4 (wayland-client.c:1274)
by 0x5493A13: dispatch_queue (wayland-client.c:1420)
by 0x5493A13: wl_display_dispatch_queue_pending
(wayland-client.c:1662)
by 0x5493D2E: wl_display_roundtrip_queue (wayland-client.c:1085)
by 0x4232EC: xwl_screen_init (xwayland.c:632)
by 0x439F50: AddScreen (dispatch.c:3864)
Split xwl_output_destroy() into xwl_output_destroy() which frees the
wl_output and the xwl_output structure, and xwl_output_remove() which
does the RRCrtcDestroy() and RROutputDestroy() and call the latter only
when an output is effectively removed.
An additional benefit, on top of avoiding a double free, is to avoid
updating the screen size at shutdown.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Olivier Fourdan
Joshua Ashton
Minh Phan
zhoulei
Drew DeVault
Simon Ser
Michel Dänzer
Roman Gilg
Hans de Goede
Robert Mader
Adam Jackson
Lionel Landwerlin
Jason Ekstrand
Carlos Garnacho
Peter Hutterer
Pekka Paalanen