This is a modified version of a patch we've been carry-ing in Fedora and
RHEL for years now. This patch automatically adds secondary GPUs to the
master as output sink / offload source making e.g. the use of
slave-outputs just work, with requiring the user to manually run
"xrandr --setprovideroutputsource" before he can hookup an external
monitor to his hybrid graphics laptop.
There is one problem with this patch, which is why it was not upstreamed
before. What to do when a secondary GPU gets detected really is a policy
decission (e.g. one may want to autobind PCI GPUs but not USB ones) and
as such should be under control of the Desktop Environment.
Unconditionally adding autobinding support to the xserver will result
in races between the DE dealing with the hotplug of a secondary GPU
and the server itself dealing with it.
However we've waited for years for any Desktop Environments to actually
start doing some sort of autoconfiguration of secondary GPUs and there
is still not a single DE dealing with this, so I believe that it is
time to upstream this now.
To avoid potential future problems if any DEs get support for doing
secondary GPU configuration themselves, the new autobind functionality
is made optional. Since no DEs currently support doing this themselves it
is enabled by default. When DEs grow support for doing this themselves
they can disable the servers autobinding through the servers cmdline or a
xorg.conf snippet.
Signed-off-by: Dave Airlie <airlied@gmail.com>
[hdegoede@redhat.com: Make configurable, fix with nvidia, submit upstream]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
---
Changes in v2:
-Make the default enabled instead of installing a xorg.conf
snippet which enables it unconditionally
Changes in v3:
-Handle GPUScreen autoconfig in randr/rrprovider.c, looking at
rrScrPriv->provider, rather then in hw/xfree86/modes/xf86Crtc.c
looking at xf86CrtcConfig->provider. This fixes the autoconfig not
working with the nvidia binary driver
No supported driver supports 1bpp anymore, nor has in a very long time.
This option only worked with vgahw anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
This lets an application open a suitable DRM device and pass the file
descriptor to the mode setting driver through an X server command line
option, '-masterfd'.
There's a companion application, xlease, which creates a DRM master by
leasing an output from another X server. That is available at
git clone git://people.freedesktop.org/~keithp/xlease
v2:
Always print usage, but note that it can't be used if
setuid/gid
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
The only way to get at xf86Info.disableRandR from configuration is
Option "RANDR" "foo" in ServerFlags, which probably nobody is using
seeing as it's not documented. The other way it could be set is if a
screen supports RANDR 1.2, in which case we set it to avoid trying to
use the RANDR 1.1 compat code. If the second screen is not 1.2-aware
then this would mean we don't do RANDR setup on the second screen at
all, which would almost certainly crash the first time you try to do
RANDR operations on the second screen.
Fix that all by deletion, and just check whether the screen already has
RANDR initialized before installing the stub support. If you want to
disable RANDR, use the Extensions section of xorg.conf instead.
v2: Also remove a now entirely pointless log message, telling you to
ignore a line we will no longer print.
v3: Explain the fallback path in InitOutput. (Keith Packard)
v4: Check whether the RANDR private key is initialized before trying to
use it to look up the screen private.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tsk. This broke vesa for me, the rrGetScrPriv in InitOutput will crash
if randr's screen private key hasn't been initialized yet. That seems
dumb, but let's not leave it broken.
This reverts commit c08d7c1cdd.
The only way to get at xf86Info.disableRandR from configuration is
Option "RANDR" "foo" in ServerFlags, which probably nobody is using
seeing as it's not documented. The other way it could be set is if a
screen supports RANDR 1.2, in which case we set it to avoid trying to
use the RANDR 1.1 compat code. If the second screen is not 1.2-aware
then this would mean we don't do RANDR setup on the second screen at
all, which would almost certainly crash the first time you try to do
RANDR operations on the second screen.
Fix that all by deletion, and just check whether the screen already has
RANDR initialized before installing the stub support. If you want to
disable RANDR, use the Extensions section of xorg.conf instead.
v2: Also remove a now entirely pointless log message, telling you to
ignore a line we will no longer print.
v3: Explain the fallback path in InitOutput. (Keith Packard)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This no longer does anything useful.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
There's really no reason to pretend to support this, apps hate it, all
we're doing is giving people a way to injure themselves. It doesn't work
anyway with any Radeon, any NVIDIA chip, or any Intel chip since i810.
Rip out all the logic for handling 24bpp pixmaps and framebuffers, and
silently ignore the old options that would ask for it.
The cirrus alpine driver has been updated to default to 16bpp, and both
it and the i810 driver can now use the 32->24 conversion code in shadow
if they want. All other drivers support 32bpp. Configurations that
explicitly request 24bpp in order to fit in VRAM will be broken now
though.
v2: Fix command line options to silently ignore 24bpp rather than fail
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If we did not find any non GPU Screens, try again ignoring the notion
of any video devices being the primary device. This fixes Xorg exiting
with a "no screens found" error when using virtio-vga in a
virtual-machine and when using a device driven by simpledrm.
This is a somewhat ugly solution, but it is the best I can come up with
without major surgery to the bus and probe code.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
All consumers have been ported to the root window callback, so this can
all be nuked.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Globally replace #ifdef and #if defined usage of 'sun' with '__sun'
such that strict ISO compiler modes such as -ansi or -std=c99 can be used.
Signed-off-by: Richard PALO <richard@NetBSD.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Rather then a full path prefix, this is a preparation patch for adding
support for logging to another location when not running as root.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This option is to stop the X server adding non-primary devices as
gpu screens.
v2: fix per Keith's suggestion.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the structures and interfaces required for adding/deleteing
gpu screens at the DDX level. The platform probe can pass a new flag
to the driver, so they can call xf86AllocateScreen and pass back the new
gpu screen flag.
It also calls the gpu screens preinit and screeninit routines at
startup.
v2: fix delete screen use after free.
v3: split out pScrn into separate patch
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This does not really handle hotplug (it's handled inside the kernel,
by the 'mux' devices), but uses the wscons console driver
configuration to figure out the keyboard layout and the list of
pointing devices found by the kernel.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Stop duplicating in each os-support variant before it gets replicated
even further.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
What is this, I don't even.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This is a more accurate name for the actual functionality than
allowEmptyInput. Historically, allowEmptyInput has allowed the server to
start with no input devices. Since 1.4 and the introduction of VCP and VCK,
there are always two input devices present.
allowEmptyInput was changed in behaviour to essentially "ignore xorg.conf
devices or not", auto-adding the built-in devices if disabled.
Rename to forceInputDevices, because that's essentially what it does. When
disabled (i.e. when hotplugging is enabled), it disables all
mouse/kbd/vmmouse devices configured in the xorg.conf file.
When enabled, it forces the traditional behaviour for input devices:
- use input devices configured in the server layout
- if none are configured, use the first pointer and the first keyboard
device in the xorg.conf
- if none are configured, create the default pointer/keyboard devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Make xf86IsolateDevice private on PCI common file.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This was obsolete after 3eeb62e8f5 "bug #890: completely remove deprecated keyboard driver".
Signed-off-by: Jesse Adkins <jesserayadkins@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a new command line parameter, -configdir, to specify the config
directory to be used. Rules are the same as -config for root vs. user
privileges.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Default remains the same - on for most OS'es on i386 (except Solaris),
off for everyone else. Can be manually toggled via --enable-pc98 or
--disable-pc98.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Inside a windowing system, it's not the place to probe for devices. Goodbye
-probe and -probeonly.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Such stupid and ugly way to dump PCI information! Oh boy... Anyway, this
doesn't belong to the X server at all. Go away!
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
GIT change
http://cgit.freedesktop.org/xorg/xserver/commit/?id=45c8bd0fe54273039fdaa1eeeafb81b5774f2c75
changed the default symbol visibility of the Xserver. As a result 2 symbols
that are needed by the RandR 1.2/1.3 implementation in the fglrx driver are no
longer visible:
xf86configptr
xf86CursorScreenKey
We would like to get these two symbols _X_EXPORT'ed before Xserver 1.7 is
released. Otherwise it will be problematic for fglrx to support RandR 1.3 on
Xserver 1.7.
In the future, we may want to sync our RandR implementation to later versions
of the RandR implementation in hw/xfree86/modes. Therefore it would be nice if
all symbols used by the Xserver RandR implementation were _X_EXPORT'ed in the
future.
Was only used to provide a list of input devices that XF86-Misc could use,
now that XF86-Misc is gone, was parsed and logged, then completely ignored.
(Depends on previous patch that introduces OBSOLETE_TOKEN in parser to
make obsolete keywords like InputDevices & RgbPath be non-fatal errors.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
This patch exports all symbols required by the compilable
(in a x86 linux computer) xorg/driver/* modules.
Still missing symbols worth mentioning are:
sunleo
miFindMaxBand no longer available
intel (uxa/uxa-accel.c)
fbShmPutImage no longer available (and should have been static)
mga
MGAGetClientPointer (should come from matrox's libhal)
This is not a definitive "visibility" patch, as all it does is to
export missing symbols, but the modules that current don't compile,
may require more symbols once fixed, and third party drivers should
also require more symbols exported.
A "definitive" patch should export symbols defined in the sdk.
Enrico Weigelt, metux IT consult
Izumi Tsutsui
Dave Airlie
Adam Jackson
Keith Packard
Hans de Goede
Richard PALO
Alan Coopersmith
Matthieu Herrb
Alexandr Shadchin
Jamey Sharp
Peter Hutterer
Tiago Vignatti
Jesse Adkins
Julien Cristau
Dan Nicholson
Alan Coopersmith
Aaron Zang
Felix Kuehling
Paulo Cesar Pereira de Andrade
Stefan Dirsch