A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
As documented in xorg.conf(5), a value of ConstantDeceleration between 0
and 1 will speed up the pointer. However, values less than 1 actually
had no effect. Fix this.
Note that this bug only affected "ConstantDeceleration" as configured
through xorg.conf, not "Device Accel Constant Deceleration" as configured
through xinput. The property handler AccelSetDecelProperty() also did
not need to be changed, as it did not limit the values of the property.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=92766
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We want to notice that it's set, but still pass it through to dix.
Return 0 to indicate this.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
A new --with-fallback-input-driver=foo option allows selecting a
fallback driver for the server if the driver configured for the device
is not found. Note that this only applies when the device has a driver
assigned and that module fails to load, devices without a driver are
ignored as usual.
This avoids the situation where a configuration assigns e.g. the
synaptics driver but that driver is not available on the system,
resulting in a dead device. A fallback driver can at least provides some
functionality.
This becomes more important as we move towards making other driver true
leaf nodes that can be installed/uninstalled as requested. Specifically,
wacom and synaptics, a config that assigns either driver should be
viable even when the driver itself is not (yet) installed on the system.
It is up to the distributions to make sure that the fallback driver is
always installed. The fallback driver can be disabled with
--without-fallback-input-driver and is disabled by default on non-Linux
systems because we don't have generic drivers on those platforms.
Default driver on Linux is libinput, evdev is the only other serious
candidate here.
Sample log output:
[ 3274.421] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 3274.421] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad weird driver"
[ 3274.421] (II) LoadModule: "banana"
[ 3274.422] (WW) Warning, couldn't open module banana
[ 3274.422] (II) UnloadModule: "banana"
[ 3274.422] (II) Unloading banana
[ 3274.422] (EE) Failed to load module "banana" (module does not exist, 0)
[ 3274.422] (EE) No input driver matching `banana'
[ 3274.422] (II) Falling back to input driver `libinput'
.. server proceeds to assign libinput, init the device, world peace and rainbows
everywhere, truly what a sight. Shame about the banana though.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is an ABI break, in that we now pass NULL to a function that hasn't
accepted it before.
Alex Goins had a different patch for this but it wasn't symmetrical, it
freed something in a very different place than it allocated it, this
attempts to retain symmetry in the releasing of the backing bo.
v2: use a new toplevel API, though it still passes NULL to something
that wasn't expecting it.
v3: pass -1 instead of 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Goins <agoins at nvidia.com>
Not visible in the patch, but the same stanza is repeated below inside
the #ifdef GLXEXT. There's no reason to bother with checking it if we
built without GLXEXT so remove the unconditional one.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The doc text is wrong at this point, input processing isn't going to
vary based on this, so we shouldn't say it does. The only thing this
_does_ get used for is DRI1 SwapBuffers (on everything but savage), and
if you disable it you're not going to get DRI1 at all, so we really
shouldn't even mention it.
Still, leave the option wired up to the parser so we don't break any
DRI1-driver-using setup relying on it being disabled, and so we don't
complain about unused options elsewhere.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
As the man page for the latter states:
The effects of signal() in a multithreaded process are unspecified.
We already have an interface to call sigaction() instead, use it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
No longer needed now that xf86CursorResetCursor is getting called for
each CRTC configuration change.
v2: Keep xf86_reload_cursors as a deprecated empty inline function
until all drivers stop calling it. (Adam Jackson)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Fixes a crash on startup in the radeon driver's drmmode_show_cursor()
due to xf86_config->cursor == NULL, because no CRTC was enabled yet, so
xf86_crtc_load_cursor_image was never called.
(Also use scrn->pScreen instead of xf86ScrnToScreen(scrn))
v2: Set xf86_config->cursor at the beginning of xf86_load_cursor_image
instead of at the end.
Reviewed-by: Keith Packard <keithp@keithp.com>
Threaded input doesn't use SIGIO anymore, but existing drivers using
xf86BlockSIGIO and xf86ReleaseSIGIO probably want to lock the input
mutex during those operations. Provide inline functions to do this
which are marked as 'deprecated' so that drivers will get warnings
until they are changed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Oops. This didn't get removed when xfree86 was converted over to use
the input thread.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
threaded input can affect drivers that use OsBlockSIGIO when dealing
with cursors.
Signed-off-by: Keith Packard <keithp@keithp.com>
Requested-by: Peter Hutterer <peter.hutterer@who-t.net>
Use this instead of the (now deprecated) cursor pointer in the
xf86CrtcConfigRec.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Switch the XFree86 DDX over to threaded input
v2: Rewrite comment in xf86Helper about silken mouse
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The current SIGIO signal handler method, used at generation of input events,
has a bunch of oddities. This patch introduces an alternative way using a
thread, which is used to select() all input device file descriptors.
A mutex was used to control the access to input structures by the main and input
threads. Two pipes to emit alert events (such hotplug ones) and guarantee the
proper communication between them was also used.
Co-authored-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
v2: Fix non-Xorg link. Enable where supported by default.
This also splits out the actual enabling of input threads to
DDX-specific patches which follow
v3: Make the input lock recursive
v4: Use regular RECURSIVE_MUTEXes instead of rolling our own
Respect the --disable-input-thread configuration option by
providing stubs that expose the same API/ABI.
Respond to style comments from Peter Hutterer.
v5: use __func__ in inputthread debug and error mesages.
Respond to style comments from Peter Hutterer.
v6: use AX_PTHREAD instead of inlining pthread tests.
Suggested by Emil Velikov <emil.l.velikov@gmail.com>
v7: Use pthread_sigmask instead of sigprocmask when using threads
Suggested by Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When this code was called from SIGIO, saving and restoring errno could
possibly have made sense in some strange environment. Now that this
will not be called from a signal handler, there is no reason to do that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Not all display managers make it easy (or possible) to modify the
command line flags passed to the server, so add a way to get to it from
xorg.conf.
v2: Fix the FlagOptions list to not have IGLX after the terminator (Alan
Coopersmith)
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This makes the cursor pointer held by xf86Cursors.c get reset to NULL
whenever the cursor isn't displayed, and means that the reference
count held in xf86Cursor.c is sufficient to cover the reference in
xf86Cursors.c.
As HideCursor may be called in the cursor loading path after
UseHWCursor or UseHWCursorARGB when HARDWARE_CURSOR_UPDATE_UNHIDDEN
isn't set in the Flags field, the setting of the cursor pointer had to
be moved to the LoadCursor paths.
LoadCursorARGBCheck gets the cursor pointer, but LoadCursorImageCheck
does not. For LoadCursorImageCheck, I added a new function,
xf86CurrentCursor, which returns the current cursor. With this new
function, we can eliminate the cursor pointer from the
xf86CrtcConfigRec, once drivers are converted over to use it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix build without --enable-glamor.
Caught by the arm tinderbox.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The destination variable is never freed, thus we even plug some memory
leaks.
v2: Rebase against updated xf86CheckPrivs() helper.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Current message was quite off "file specified must be a relative path"
and alike. Just factor it out and use "path/file" as needed.
v2: Rework error message, drop "Using default", print actual arg value.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This moves the capabilites setting to after glamor is initialised, and
enables the offload caps in cases where they work. This enables DRI2
PRIME support with modesetting.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Slave GPUs don't have a root window to set this on, so don't.
This fixes some crashes I saw just playing around.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise ms_ent_priv will return NULL and things will fall apart.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For some reason a couple of the dirty functions in driver.c used 8
spaces per tab instead of 4 like the rest of the file. Fix this to make
it more consistent and give me more room to work in ms_dirty_update in
subsequent commits.
v1: N/A
v2: N/A
v3: N/A
v4: Initial commit
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The tablet pads have been separate kernel devices for a while now and
libwacom has labelled them with the udev ID_INPUT_TABLET_PAD for over a year
now. Add a new MatchIsTabletPad directive to apply configuration options
specifically to the Pad part of a tablet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Both radeon and amdgpu don't set the mode until the first blockhandler,
this means everything should be rendered on the screen correctly by
then.
This ports this code, it also removes the tail call of EnterVT from
ScreenInit, it really isn't necessary and causes us to set a dirty mode
with -modesetting always anyways.
v2: reorder set desired modes vs block handler as done for amdgpu.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This adds support using glamor for background None.
loosely based off the amdgpu code. relies on the glamor_finish code.
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
-Wlogical-op now tells us:
devices.c:1685:23: warning: logical ‘and’ of equal expressions
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
R_SP is also defined in <sys/ucontext.h> on m68k. Also remove duplicate
definitions.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Rather than 'hacking' around symbol names and providing macros such as
'Local' just fold things and make the code more readable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
... so that we can use it without the forward declaration. Plus we're
doing to reuse it in the next commit ;-)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Add the const notation to all the static storage as well as the
functions that use it - xf86getToken(), xf86getSubTokenWithTab(),
StringToToken() and xf86getStringToken().
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
All consumers have been ported to the root window callback, so this can
all be nuked.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Practically speaking, the EDID major version is never not 1.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We can call this more than once via xf86OutputSetEDID since hotplug is
actually a thing in RANDR 1.2, but xf86RegisterRootWindowProperty merely
adds the data to a list to be applied to the root at CreateWindow time,
so calls past the first (for a given screen) would have no effect until
server regen.
Once we've initialised pScrn->pScreen is filled in, so we can just set
the property directly.
v2: Removed pointless version check, deobfuscate math (Walter Harms)
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
For the dri2 backend, we depend on xfree86 already, so we can walk the
options for the screen looking for a vendor string from xorg.conf. For
the swrast backend we don't have that luxury, so just say mesa. This
extension isn't really meaningful on Windows or OSX yet (since libglvnd
isn't really functional there yet), so on those platforms we don't say
anything and return BadValue for the token from QueryServerString.
v2: Use xnf* allocators when parsing options (Eric and Emil)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When the HW cursor is hidden (e.g. because xf86CursorResetCursor
triggers a switch from HW cursor to SW cursor), the driver isn't
notified of this for disabled CRTCs. If the HW cursor was shown when the
CRTC was disabled, it may still be displayed when the CRTC is enabled
again.
Prevent this by explicitly hiding the HW cursor again after setting a
mode if it's currently supposed to be hidden.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94560
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
There are no longer any loadable font modules (not that they ever did
much in the first place), so stop pretending they're a defined ABI
surface.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Was removed from the tree in:
commit f175cf45ae
Author: Olivier Fourdan <ofourdan@redhat.com>
Date: Wed Feb 10 09:34:34 2016 +0100
vidmode: move to a separate library of its own
but not removed from the Makefile, which broke 'make dist'.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Setting crtc->transformPresent to FALSE was preventing the transform
from actually taking effect and putting RandR into a confused state.
Now that the RandR 1.2 cursor code handles transforms correctly, we can
allow them to properly take effect.
Reviewed-by: Keith Packard <keithp@keithp.com>
Add xf86CursorResetCursor, which allows switching between HW and SW
cursor depending on the current state.
Call it from xf86DisableUnusedFunctions, which is called after any CRTC
configuration change such as setting a mode or disabling a CRTC. This
makes sure that SW cursor is used e.g. while a transform is in use on
any CRTC or while there are active PRIME output slaves, and enables HW
cursor again once none of those conditions are true anymore.
Reviewed-by: Keith Packard <keithp@keithp.com>
We currently don't handle transforms for the HW cursor image, so return
FALSE to signal a software cursor must be used if a transform is in use
on any CRTC.
v2: Check crtc->transformPresent instead of crtc->transform_in_use. The
latter is TRUE for rotation as well, which we handle correctly.
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch introduces a new flag ATTR_KEY for hotplugged input devices,
so we can better distinguish between real keyboards (i.e. devices with
udev property ID_INPUT_KEYBOARD="1") and other key input devices like
lid switches, power buttons, etc.
All supported hotplug backends (udev, hal, and wscons) will set both
flags ATTR_KEY and ATTR_KEYBOARD for real keyboards, but udev backend
will set ATTR_KEY, but not ATTR_KEYBOARD, for non-keyboard key input
devices (hal and wscons will set both flags in any case). With this
distinction, kdrive input hotplugging mechanism will be allowed to only
grab real keyboards, as other key input devices are currently not
supported.
In order to don't break current behaviour, this patch will replace all
ATTR_KEYBOARD occurrences with ATTR_KEY in hw/xfree86/common/xf86Xinput.c.
[ajax: Just add ATTR_KEY, don't re-number the other attributes]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
The API signature of the DIX xf86VidModeGetGammaRampSize() is now
identical to the xf86cmap's xf86GetGammaRampSize() and all it does is
actually call xf86GetGammaRampSize() so we can save one vfunc.
Remove uneeded xf86VidModeGetGammaRampSize() function.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The DIX already checks for VidModePrivateKey to get the vfunc, so
checking for this again in the DDX is redundant.
Remove the redundant function xf86VidModeAvailable() from the DDX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
XVidMode extension might be useful to non hardware servers as well (e.g.
Xwayand) so that applications that rely on it (e.g. lot of older games)
can at least have read access to XVidMode.
But the implementation is very XFree86 centric, so the idea is to add
a bunch of vfunc that other non-XFree86 servers can hook up into to
provide a similar functionality.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87806
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
To avoid confusion as to what belongs on the DDX and what not.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
To be able to reuse the VidMode extension in a non-hardware server, the
display mode definitions need to be accessible from DIX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The mode access functions (namely VidModeCreateMode(),
VidModeCopyMode(), VidModeGetModeValue() and VidModeSetModeValue()) are
used only in xf86VidMode code and do not need to be available anywhere
else.
Remove these functions from the public VidMode API and move them as
static where they are used.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The API uses an untyped pointer (void *) where a DisplayModePtr is
expected.
Clean up the API to use the appropriate type, as DisplayModePtr is
really all that will be passed there.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
VidModeGetMonitor() is used solely in ProcXF86VidModeGetMonitor() to
get a untyped monitor pointer that is passed back straight again to
VidModeGetMonitorValue().
This is actually useless as VidModeGetMonitorValue() could as well get
the monitor from the ScreenPtr just like VidModeGetMonitor() does.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
New code passes ScreenPtr instead of the screen index.
Change the VidMode functions to take a ScreenPtr.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
As we rely on dixRegisterPrivateKey() to allocate the memory for us that
will be free automatically, we do not need the CloseScreen wrapper
anymore.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
dixRegisterPrivateKey() can allocate memory that will be freed when the
screen is teared down.
No need to calloc() and free the memory ourself using a broken ref
counting method.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This patch was motivated by the need to fix the use-after-free in
dri2ClientWake, but in doing so removes an arbitrary restriction that
limits DRI2 to only blocking the first client on each drawable. In order
to fix the use-after-free, we need to avoid touching our privates in the
ClientSleep callback and so we want to only use that external list as
our means of controlling sleeps and wakeups. We thus have a list of
sleeping clients at our disposal and can manage multiple events and
sources.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Add virtio-gpu legacy + 1.0 pci ids, allowing them to use
modesetting + glamor with dri2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In commit e43abdce96
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Feb 3 09:54:46 2016 +0000
dri2: Unblock Clients on Drawable release
we try to wake up any blocked clients at drawable destruction. But by
the time we get there, CloseDownConnection has already torn down state
that AttendClient wants to modify.
Using ClientSleep instead of IgnoreClient puts a wakeup function on a
workqueue, and the queue will be cleared for us in CloseDownClient
before (non-neverretain) resource teardown.
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the Window is destroyed by another client, such as the window
manager, the original client may be blocked by DRI2 awaiting a vblank
event. When this happens, DRI2DrawableGone forgets to unblock that
client and so the wait never completes.
Note Present/xshmfence is also suspectible to this race.
Testcase: dri2-race/manager
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
All callers of SetWindowPixmap will themselves be traversing the Window
heirarchy updating the backing Pixmap of each child and so we can forgo
doing the identical traversal inside the DRI2SetWindowPixmap handler.
Reported-by: Loïc Yhuel <loic.yhuel@gmail.com>
Link: http://lists.x.org/archives/xorg-devel/2015-February/045638.html
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This applies regardless of which DRI you're asking for. Worse, leaving
it out means breaking the config file syntax in a pointless way, since
non-DRI servers can safely just parse it and ignore it.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Adds Skylake, Kabylake and Broxton allowing them to use
modesetting + glamor with dri2.
Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Fixes build errors of:
present.c: In function 'ms_do_pageflip':
present.c:410:17: error: 'drmmode_bo' has no member named 'gbm'
new_front_bo.gbm = glamor_gbm_bo_from_pixmap(screen, new_front);
^
present.c:412:22: error: 'drmmode_bo' has no member named 'gbm'
if (!new_front_bo.gbm) {
^
present.c: In function 'ms_present_check_flip':
present.c:536:36: error: 'drmmode_bo' has no member named 'gbm'
if (drmmode_crtc->rotate_bo.gbm)
^
Introduced by commit 13c7d53d
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
No real change, but if the driver is broken and doesn't provide a PreInit
function, then we don't need to worry about logind.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
InputClass sections use various MatchFoo directives to decide which device to
apply to. This usually works fine for specific snippets but has drawbacks for
snippets that apply more generally to a multitude of devices.
This patch adds a NoMatchFoo directive to negate a match, thus allowing
snippets that only apply if a given condition is not set. Specifically, this
allows for more flexible fallback driver matching, it is now possible to use a
snippet that says "assign driver foo, but only if driver bar wasn't already
assigned to it". For example:
Section "InputClass"
Identifier "libinput for tablets"
MatchIsTablet "true"
NoMatchDriver "wacom"
Driver "libinput"
EndSection
The above only assigns libinput to tablet devices if wacom isn't already
assigned to this device, making it possible to select a specific driver by
installing/uninstalling it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Since non-seat0 X servers no longer touch VTs, I believe these settings
are unnecessary.
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(Sorry for double posting)
I repost this patch because I havn't got any replies from maintainers
since I posted the initial patch back in March.
Some instructions are not emulated correctly by x86emu when they
are prefixed by the 0x66 opcode.
I've identified problems in the emulation of these intructions: ret,
enter, leave, iret and some forms of call.
Most of the time, the problem is that these instructions should push or
pop 32-bit values to/from the stack, instead of 16bit, when they are
prefixed by the 0x66 special opcode.
The SeaBIOS project aims to produce a complete legacy BIOS
implementation as well as a VGA option ROM, entirely written in C and
using the GCC compiler.
In 16bit code produced by the GCC compiler, the 0x66 prefix is used
almost everywhere. This patch is necessary to allow the SeaBIOS VGA
option ROM to function with Xorg when using the vesa driver.
SeaBIOS currently use postprocessing on the ROM assembly output to
replace the affected instruction with alternative unaffected instructions.
This is obviously not very elegant, and this fix in x86emu would be
more appropriate.
v2: - Decrement BP instead of EBP in accordance with the Intel Manual
- Assign EIP instead of IP when poping the return address from the
stack in 32-bit operand size mode in ret_far_IMM, ret_far, and iret
- When poping EFLAGS from the stack in iret in 32-bit operand size
mode, apply some mask to preserve Read-only flags.
v3: - Rebase
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
This moves the code from the platform case into
a common function, and calls that from the
other two.
v2: Emil convinced me we don't need to lookup pEnt
here, so let's not bother.
Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This isn't used anywhere, so no point storing it until we need it.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Xorg.wrap includes code guarded with WITH_LIBDRM for detecting KMS drivers.
Unfortunately it is never activated since code missed to include file
which defines WITH_LIBDRM.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92894
Signed-off-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove code in xf86Wakeup for dealing with device and other input and
switch to using the new NotifyFd interface.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace the block/wakeup handlers with a NotifyFd callback.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Globally replace #ifdef and #if defined usage of 'sun' with '__sun'
such that strict ISO compiler modes such as -ansi or -std=c99 can be used.
Signed-off-by: Richard PALO <richard@NetBSD.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
DestroyPixmap handles that just fine. This also lets us drop our use
of the manual image destruction function (Note that the radeon driver
still uses it in a similar fashion, though).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Michael Stapelberg <stapelberg@google.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The ifdef checks for XF86_CRTC_VERSION >= 3/5 are remnants from the
out-of-tree driver. Within the tree, we can rely on:
xf86Crtc.h:#define XF86_CRTC_VERSION 6
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
We calloc() output_ids. Let's free() it, too.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a bug where running the card out of PPLL's when hotplugging
another monitor would result in all of the displays going blank and
failing to work properly until X was restarted or the user switched to
another VT.
[Michel Dänzer: Pass errno instead of -ret to strerror()]
[Daniel Martin: Add \n to log message]
Picked from xf86-video-ati
7186a87 Handle failures in setting a CRTC to a DRM mode properly
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
As the code says, this is "far from complete". So far, in fact, that
it's been basically untouched for twenty years (XFree86 3.1!). As far
as I can tell it was never enabled in any XFree86 build, and certainly
has never been enabled since Xorg 7.0.
Also, K&R.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
These settings affect clients, not server, so belong there, next to
the information about how to set $DISPLAY.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Fixes DRI2 client driver name mapping for newer AMD GPUs with the
modesetting driver, allowing the DRI2 extension to initialize.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This matches the GCCUSESGAS path from the old monolith build (where that
macro was actually set), and fixes the build on modern OSX.
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
At startup the server wasn't adding devices, but nothing
was blocking hotplug devices by the look of it.
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91388
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
FatalError ends up calling xf86CloseConsole itself, so calling FatalError
from within xf86CloseConsole is not a good idea.
Make switch_to log errors using xf86Msg(X_WARNING, ...) and return success
(or failure).
This makes switch_to match the other error checking done in xf86CloseConsole
which all logs warnings and continues.
Add checking of the return value in xf86OpenConsole and call
FatalError there when switch_to fails, to preserve the error-handling
behavior of xf86OpenConsole.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1269210
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
hurd does not have any PATH_MAX limitation. misc.h provides a default value
which is fine here.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When the server is privileged, we shouldn't be passing the user's
environment directly.
Clearing the environment is recommended by the libdbus maintainers, see
https://bugs.freedesktop.org/show_bug.cgi?id=52202
v2: rename envp to empty_envp (Jeremy)
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83849
Signed-off-by: Julien Cristau <jcristau@debian.org>
Check for integer overflow before using stuff->count in a multiplication,
to avoid compiler optimizing out due to undefined behaviour, but only
after we've checked to make sure stuff->count is in the range of the
request we're parsing.
Reported-by: jes@posteo.de
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
xserver/hw/xfree86/common/xf86Helper.c:1834:12: error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘Atom’ [-Werror=format=]
xserver/hw/xfree86/common/xf86Helper.c:1834:12: error: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘Atom’ [-Werror=format=]
Atom is unfortunately unsigned long or unsigned int depending on the
architecture, so a cast is required.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Now since the installable libxf86config is gone, rename
libxf86config_internal to libxf86config.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The library used by the Xserver to read and parse the configuration file
could be built so that it culd be installed as a separate lib and used
by external programs.
Apparently there has not been any interest in this for quite a while as
this library has been broken for a long time now in the sense that it
was calling functions provided by the Xserver which were not implemented
for the external library.
Since this library is useless as it is anyway when built let's drop
support for it.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The correct refresh rate for this mode is 75, not 85.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Some ioctls may not be supported by the kernel however their failure
is non-fatal to the driver. Unfortunately we only know once we try
to execute the ioctl however the sematics of the fbdev driver API
doesn't allow upper layers to disable the call.
Instead of changing the fbdevHW driver API just disable the call to
this ioctl on the module level when detecting such a case.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Egbert Eich <eich@freedesktop.org>
The only drivers I can find that used this are the r128 and radeon DRI
drivers. r128 is dead and the radeon driver wasn't including Xorg's
compiler.h and still worked.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
When xf86RandR12Key is not set we will not get to the places where
these tests are done as the functions in question are not called.
In most cases we would have crashed before these checks anyway.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
The X server frequently deals with SIGIO and SIGALRM interruptions.
If process execution is inside certain blocking system calls
when these signals arrive, e.g. with the kernel blocked on
a contended semaphore, the system calls will be interrupted.
Some system calls are automatically restartable (the kernel re-executes
them with the same parameters once the signal handler returns) but
only if the signal handler allows it.
Set SA_RESTART on the signal handlers to enable this convenient
behaviour.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
A user on a nouveau-driven card ran into a problem where DVI-D-1 and
DVI-I-1 were aliasing. The simplest fix is to provide the full connector
names. While we're at it, rename the output names to match what is in
the kernel, and start counting the connectors from 1 rather than 0. The
only deviation is HDMI vs HDMI-A, which kept its original name.
This will break backwards compatibility with existing xorg.conf's that
reference output names, but the alternative is to create a separate
counting system, further disconnecting from the kernel names.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
<termio.h> is obsolete. Using <termios.h> instead fixes building with
musl libc.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Felix Janda <felix.janda@posteo.de>
some X manuals use then escape sequence \/ when they want to render
a slash. That's bad because \/ is not a slash but an italic
correction, never producing any output, having no effect at all in
terminal output, and only changing spacing in a minor way in typeset
output.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
xorg/xserver/hw/xfree86/dri/dri.c:1695:19: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘DRIContextPrivPtr’ [-Werror=format=] ^
xorg/xserver/hw/xfree86/dri/dri.c:1695:19: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘DRIContextPrivPtr’ [-Werror=format=]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
xserver/hw/xfree86/ramdac/TI.c:118:12: error: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long unsigned int’ [-Werror=format=]
xserver/hw/xfree86/ramdac/TI.c:118:12: error: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
xserver/hw/xfree86/ramdac/TI.c:118:12: error: format ‘%d’ expects argument of type ‘int’, but argument 6 has type ‘long unsigned int’ [-Werror=format=]
Use %lu for an unsigned long
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
xserver/hw/xfree86/common/xf86Events.c:183:5: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘void *’ [-Werror=format=]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make the maximum number of clients user configurable, either from the command
line or from xorg.conf
This patch works by using the MAXCLIENTS (raised to 512) as the maximum
allowed number of clients, but allowing the actual limit to be set by the
user to a lower value (keeping the default of 256).
There is a limit size of 29 bits to be used to store both the client ID and
the X resources ID, so by reducing the number of clients allowed to connect to
the X server, the user can increase the number of X resources per client or
vice-versa.
Parts of this patch are based on a similar patch from Adam Jackson
<ajax@redhat.com>
This now requires at least xproto 7.0.28
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Descriptions for Options PageFlip and SWCursor.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds zaphod and ZaphodHeads support
to the the in-server modesetting driver.
this is based on a request from Mario,
and on the current radeon driver, along
with some patches from Mario to bring things
up to the state of the art in Zaphod.
v2: fixup vblank fd registring.
v3: squash Mario's fixes.
modesetting: Allow/Fix use of multiple ZaphodHead outputs per x-screen.
modesetting: Take shift in crtc positions for ZaphodHeads configs into account.
modesetting: Add ZaphodHeads description to man page.
small cleanups (airlied).
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit 90db5edf11 modified the signature of
StartPixmapTrackingProcPtr, so drivers implementing that need to use the updated
definition.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Header was added in 1dba5a0b19
but not in Makefile.am, resulting in missing header in the
distribution tarball.
Signed-off-by: Eric Anholt <eric@anholt.net>
glamor_name_from_pixmap and glamor_fd_from_pixmap return CARD16 and
CARD32 values via pointers. The current code uses uint16_t and
uint32_t which will probably be the same but it's safer to use the
datatypes as specified by the function.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Also remove vidmodeproc.h from the SDK since no drivers are using it.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes modesetting when glamor is disabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Based on code by Keith Packard, Eric Anholt, and Jason Ekstrand.
v2:
- Fix double free and flip_count underrun (caught by Mario Kleiner).
- Don't leak flip_vblank_event on the error_out path (Mario).
- Use the updated ms_flush_drm_events API (Mario, Ken).
v3: Hack around DPMS shenanigans. If all monitors are DPMS off, then
there is no active framebuffer; attempting to pageflip will hit the
error_undo paths, causing us to drmModeRmFB with no framebuffer,
which confuses the kernel into doing full modesets and generally
breaks things. To avoid this, make ms_present_check_flip check that
some CRTCs are enabled and DPMS on. This is an ugly hack that would
get better with atomic modesetting, or some core Present work.
v4:
- Don't do pageflipping if CRTCs are rotated (caught by Jason Ekstrand).
- Make pageflipping optional (Option "PageFlip" in xorg.conf.d), but
enabled by default.
v5: Initialize num_crtcs_on to 0 (caught by Michel Dänzer).
[airlied: took over]
v6: merge async flip support from Mario Kleiner
free sequence after failed vblank queue
handle unflip while DPMS'ed off (Michel)
move flip tracking into its own structure, and
fix up reference counting issues, and add comments.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Since we are shipped with the server and the server has it built-in,
don't bother trying to load it.
Don't remove or invert the if statement on purpose as a later
patch adds stuff in here.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is a specialization of ms_drm_abort that matches based on the drm
event queue's sequence number.
Based on code by Keith Packard.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
I want to use this in present.c.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, ms_flush_drm_events() returned a boolean value, and it was
very easy to interpret the meaning incorrectly. Now, we return an
integer value.
The possible outcomes of this call are:
- poll() raised an error (formerly TRUE, now -1 - poll's return value)
- poll() said there are no events (formerly TRUE, now 0).
- drmHandleEvent() raised an error (formerly FALSE, now the negative
value returned by drmHandleEvent).
- An event was successfully handled (formerly TRUE, now 1).
The nice part is that this allows you to distinguish errors (< 0),
nothing to do (= 0), and success (1). We no longer conflate errors
with success.
v2: Change ms_present_queue_vblank to < 0 instead of <= 0, fixing an
unintentional behavior change. libdrm may return EBUSY if it's
received EINTR for more than a second straight; just keep retrying
in that case. Suggested by Jasper St. Pierre.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This adds support for reverse prime to the modesetting driver.
Reverse prime is where we have two GPUs in the display chain,
but the second GPU can't scanout from the shared pixmap, so needs
an extra copy to the on screen pixmap.
This allows modesetting to support this scenario while still
supporting the USB offload one.
v1.1:
fix comment + ret = bits (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows a glamor enabled master device to have
slave USB devices attached.
Tested with modesetting on SNB + USB.
It relies on the previous patch to export linear
buffers from glamor.
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Michel pointed out I broke Zaphod with the initial auto add
gpu devices change,
Fix this, by only auto adding GPU devices if we are screen 0
and there are no other screens in the layout. Anyone who
wants to assign GPU devices can specify it in the xorg.conf
for this use case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
I doubt anyone builds with this turned off or has done for a long
time.
It helps my eyes bleed slightly less when reading the code, I've left
the define in place as some drivers use it.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Right now, Xorg does not install DBus matches for "PauseDevice" /
"ResumeDevice". Therefore, it should usually not receive those DBus
signals from logind. It is just a coincidence that systemd-logind sends
those signals in a directed manner right now. Therefore, dbus-daemon
bypasses the broadcast matches.
However, this is not ABI and Xorg should not rely on this. systemd-logind
is free to send those signals as broadcasts, in which case Xorg will
freeze the VT. Fix this by always installing those matches.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Reported-by: Jan Alexander Steffens <jan.steffens@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit fixes a small mistake in Xorg.wrap.1 .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
systemd-logind integration does not work when starting X on a new tty, as
that detaches X from the current session and after hat systemd-logind revokes
all rights any already open fds and refuses to open new fds for X.
This means that currently e.g. "startx -- vt7" breaks, and breaks badly,
requiring ssh access to the system to kill X.
The fix for this is easy, we must not use systemd-logind integration when
not using KeepTty, or iow we may only use systemd-logind integration together
with KeepTty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
linux_parse_vt_settings() was split out of xf86OpenConsole so that it can
be called earlier during systemd-logind init, but it is possible to run
the xserver in such a way that xf86OpenConsole() is never used.
The FatalError calls in linux_parse_vt_settings() may stop the Xorg xserver
from working when e.g. no /dev/tty0 is present in such a setup.
This commit adds a may_fail parameter to linux_parse_vt_settings() which
can be used to make linux_parse_vt_settings() fail silenty with an error
return in this case, rather then calling FatalError().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
systemd-logind integration does not work when starting X on a new tty, as
that detaches X from the current session and after hat systemd-logind revokes
all rights on any already open fds and refuses to open new fds for X.
This means that currently e.g. "startx -- vt7" breaks, and breaks badly,
requiring ssh access to the system to kill X.
The fix for this is easy, we must not use systemd-logind integration when
not using KeepTty, or iow we may only use systemd-logind integration together
with KeepTty.
But the final KeepTty value is not known until the code to chose which vtno to
run on has been called, which currently happens after intializing
systemd-logind.
This commit is step 1 in fixing the "startx -- vt7" breakage, it factors out
the linux xf86OpenConsole bits which set xf86Info.vtno and keepTty so that
these can be called earlier. Calling this earlier is safe as this code has
no side effects other than setting xf86Info.vtno and keepTty.
Note this basically only moves a large chunk of xf86OpenConsole() into
linux_parse_vt_settings() without changing a single line of it, this is
hard to see in the diff because the identation level has changed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If present, access the unaccelerated valuator mask values for DGA and XI2 raw
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Allows a mask to carry both accelerated and unaccelerated motion at the same
time.
This is required for xf86-input-libinput where the pointer acceleration
happens in libinput already, but parts of the server, specifically raw events
and DGA rely on device-specific unaccelerated data.
To ease integration add this as a second set to the ValuatorMask rather than
extending all APIs to carry a second, possibly NULL set of valuators.
Note that a valuator mask should only be used in either accel/unaccel or
standard mode at any time. Switching requires either a valuator_mask_zero()
call or unsetting all valuators one-by-one. Trying to mix the two will produce
a warning.
The server has a shortcut for changing a mask with the
valuator_mask_drop_unaccelerated() call. This saves us from having to loop
through all valuators on every event, we can just drop the bits we know we
don't want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Fixes mmap failures with 32-bit builds.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The code in drmmode_set_cursor does not properly handle the case where
drmModeSetCursor2 returns any other error than EINVAL and silently fails to set
a cursor.
So only return when the drmModeSetCursor2 succeeds (i.e returns 0) and disable
the cursor2 usage on EINVAL.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1205725
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If no compat_output is defined, we inadvertently (attempt to) return
whatever data is at index -1. Instead, return NULL since that's what
callers are expecting.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
This adds tiling support to the server modesetting driver,
it retrieves the tile info from the kernel and translates
it into the server format and exposes the property.
v2.1: fix resetting tile property (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is ported from the same code in the ati and intel drivers,
It uses the same option name as nvidia and the other DDXes to
disable tearing down outputs as it is hard to avoid racing with clients.
v2: address two issues with DeleteUnusedDP12 enabled, reported
by Daniel Martin,
a) check we have a mode_output before destroying it
b) only delete *unused* displays (thanks Aaron for clarifying)
so we check if the output has a crtc and if it does we don't
delete it.
v3: drop the option to delete unused displays, just encode
behaviour into the randr spec.
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to cache the mode resources and with dynamic
connectors for mst support we don't want to. So first clean that
up before adding dynamic connector support.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This creates an automatic monitor for a tiled monitor at startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This puts the tiles of the monitor in the right place at
X server startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Change the X server default to do right-of placement
at startup. This gives an option to allow drivers to
override this placement, which has been used for server
drivers where both heads are not in the same physical
place.
Been in Fedora for a few years, but for tiled monitors
we really want something along these lines.
This is an ABI break.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows us to skip the screen section, the first
Device section will get assigned to the screen,
any remaining ones will get assigned to the GPUDevice
sections for the screen.
v2: fix the skipping unsuitable screen logic (Aaron)
v3: fix segfault if not conf file (me, 5s after sending v2)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows gpu devices to be specified in xorg.conf Screen sections.
Section "Device"
Driver "intel"
Identifier "intel0"
Option "AccelMethod" "uxa"
EndSection
Section "Device"
Driver "modesetting"
Identifier "usb0"
EndSection
Section "Screen"
Identifier "screen"
Device "intel0"
GPUDevice "usb0"
EndSection
This should allow for easier tweaking of driver options which
currently mess up the GPU device discovery process.
v2: add error handling for more than 4 devices, (Emil)
fixup CONF_ defines to consistency
add MAX_GPUDEVICES define
(yes there is two defines, this is consistent
with everywhere else).
remove braces around slp (Mark Kettenis)
man page fixups (Aaron)
v2.1: fixup whitespace (Aaron)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The xnfcalloc() macro took two arguments but simply multiplied them
together without checking for overflow and defeating any overflow
checking that calloc() might have done. Let's not do that.
The original XNFcalloc() function is left for now to preserve driver
ABI, but is marked as deprecated so it can be removed in a future round
of ABI break/cleanup.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It's going to multiply anyway, so if we have non-constant values, might
as well let it do the multiplication instead of adding another multiply,
and good versions of calloc will check for & avoid overflow in the process.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Modern Solaris releases provide this functionality in the OS via the
xsvc driver. Since the move to libpciaccess, nothing in Xorg uses
this aperture driver any more.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
At the moment, the X server uses a non-default timeout for D-Bus
messages to systemd-logind. The only timeouts normally used with
D-Bus are:
1) Infinite
2) Default
Anything else is just as arbitrary as Default, and so rarely makes
sense to use instead of Default.
Put another way, there's little reason to be fault tolerant against
a local root running daemon (logind), that in some configurations, the
X server already depends on for proper functionality.
This commit changes systemd-logind to just use the default timeouts.
Downstream-bug: https://bugzilla.redhat.com/show_bug.cgi?id=1209347
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
It's possible to receive a message reply in the message filter if a
previous message call timed out locally before the reply arrived.
The message_filter function only handles signals, at the moment, and
does not properly handle message replies.
This commit changes the message_filter function to filter out all
non-signal messages, including spurious message replies.
Downstream-bug: https://bugzilla.redhat.com/show_bug.cgi?id=1209347
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Non serverfd input devices will never get a systemd-logind dbus resume signal,
causing them to never get re-enabled.
This commit changes xf86VTEnter() to enable them immediately, fixing this.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=89756
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
xf86platformProbeDev creates GPU screens for any platform devices that were not
matched by a GDev in the loop above, but only if there was at least one device.
This means that it's impossible to configure a device as a GPU screen if there
is only one platform device that matches that driver.
Instead, create a GPU screen (if possible) for any platform device that was not
claimed by the GDev loop.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
If a PCI entity is found, xf86_check_platform_slot performs a device ID check
against the xf86_platform_device passed in. However, it just returns
immediately without checking the rest of the entities first. This leads to this
situation happening:
1. The nvidia driver creates an entity 0 with bus.type == BUS_PCI
2. The intel driver creates entity 1 for its platform device, opening
/dev/dri/card0
3. xf86platformProbeDev calls probeSingleDevice on the Intel platform device,
which calls doPlatformProbe, which calls xf86_check_platform_slot.
4. xf86_check_platform_slot compares the Intel platform device against the
NVIDIA PCI entity. Since they don't have the same device ID, it returns
TRUE.
5. doPlatformProbe calls xf86ClaimPlatformSlot, which creates a duplicate entity
for the Intel one.
Fix this by only returning FALSE if the PCI ID matches, and continuing the loop
otherwise. In the scenario above, this allows it to continue on to find the
Intel platform device that matches the second entity.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Add support for drivers to set the tiling
property. This is used by clients to
work out the monitor tiles for DisplayID
monitors.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Remove these defines as we start to remove support for non-standard
glamor layering as used by the intel driver.
v2: Rebase on the blockhandler change and the Xephyr init failure
change (by anholt), fix stray NO_DRI3 addition to xwayland.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
pci_device_map_legacy returns 0 on success.
Signed-off-by: Jürg Billeter <j@bitron.ch>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Gcc5 adds additional lines stating line numbers before and
after __attribute__() which need to be skipped.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Tested-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Nothing was using it and if anyone had they would've gotten a warning and
noticed that it doesn't actually work. Drop this, it has been unused for years.
Input ABI 22
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Currently when the ddx does not set any driver name we set DRI2 driver but
not the VDPAU driver name. The result is that VDPAU drivers will not get found
by libvdpau when the modesetting driver is being used.
Just assume that the VDPAU driver matches the DRI2 driver name, this is true
for nouveau, r300, r600 and radeonsi i.e all VDPAU drivers currently supported
by mesa.
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
All of our checks for what crtc we are on take rotation into account so we
select the correct crtc. The only problem is that we weren't returning it
we were rotated. This caused X to think DRI3 apps were not on any crtc and
limit them to 1 FPS.
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This replaces the stubs for shadow buffer creation/allocation with actual
functions and adds a shadow_destroy function. With this, we actually get
shadow buffers and RandR now works properly. Most of this is copied from
the xf86-video-intel driver and modified for modesetting.
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Fix build with --disable-glamor
- Set the pixel data pointer in the pixmap header for dumb shadow bo's
- Call drmmode_create_bo with the right bpp
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Make shadow buffers per-crtc and leave shadow_enable alone
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Hans de Goede
Eric Biggers
Adam Jackson
Peter Hutterer
Dave Airlie
Michel Dänzer
Keith Packard
Dave Airlie
Emil Velikov
Alex Goins
Andreas Schwab
Sonny Jiang
Evgeny M. Zubok
Julien Cristau
Laércio de Sousa
Olivier Fourdan
Chris Wilson
Marc-Andre Lureau
Daniel Stone
Timo Aaltonen
Thomas Klausner
Alan Coopersmith
Julian Pidancet
Arkadiusz Miśkiewicz
Richard PALO
Eric Anholt
Michael Stapelberg
Daniel Martin
Samuel Thibault
Alexandr Shadchin
Jon TURNEY
Egbert Eich
Ville Syrjälä
Matt Turner
Daniel Drake
Ilia Mirkin
Felix Janda
Ingo Schwarze
Mario Kleiner
Aaron Plattner
Armin K
Robert Ancell
Kenneth Graunke
David Herrmann
Adel Gadllah
Jason Gerecke
Ray Strode
Jürg Billeter
Jason Ekstrand