This allows developers to setup Xwayland as a subproject of a
Wayland compositor, and have it correctly pick up the features
advertised in the dependency variables.
Signed-off-by: Simon Ser <contact@emersion.fr>
Remove the xwayland.pc.in file:
- This avoids writing down each pkg-config variable twice: once in
the Meson files to set the configuration data, once in the .pc.in
file to print it.
- We'll be able to re-use the same variables for use as a
subproject.
Signed-off-by: Simon Ser <contact@emersion.fr>
If wl_output provides us with an output name, use that as well.
If we have both xdg_output.name and wl_output.name (from version >= 4),
prefer the latter.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>#
See-also: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/189
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
With the wl_output protocol, the actual bind to the interface is done in
xwl_output_create().
Pass the version number from the registry so we can bind to the minimum
version.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, Xwayland assigns sequential output names for XRandR. When an
output is hotplugged, a new name is assigned sequentially (XWAYLAND0,
XWAYLAND1, etc.). This is a problem because if a monitor is unplugged
and plugged again, it will get a new name each time.
Luckily, xdg-output provides us with a name for the outputs.
Even though the protocol states that the name is not a reflection of the
underlying DRM connector name, it is to remain consistent across
sessions with the same hardware and software configuration.
So we could use the xdg-output name for the XRandR reported name for the
output.
Doing so is a bit tricky though, because the output name is set at
creation and is not supposed to change. The xdg-output event that
provides us with the name will come at a later time.
So we just allocate a default fixed size for the output name at creation
and just replace the default output name with the xdg-output name when
that is known.
Also, historically, some X11 clients were expecting output names in
Xwayland to be named XWAYLAND<x> and used that to check whether they
were running on Xwayland. Those clients should now use the Xwayland X11
extension which is designed specifically for that purpose.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1353
See-also: https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/954
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Since commit 204f10c2, we notify XRandR clients that the randr
configuration has changes as soon as an new output is created.
Yet, this might be premature, considering that at that point, we are
still to receive the wl_output and xdg-output events that will most
likely change the setup.
So instead of calling RRTellChanged() from xwl_output_create(), wait
until we get to call apply_output_change(), which occurs after the done
events from both xdg-output and wl_output are received.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Some drivers (e.g. AMD GFX8-) don't support explicit format
modifiers. On these drivers, gbm_bo_create_with_modifiers()
will fail. This results in "Error getting buffer" in the logs
later on with all X11 windows staying invisible.
Fallback to the modifier-less API gbm_bo_create() in that case.
Signed-off-by: Simon Ser <contact@emersion.fr>
The window might be retained in the damage list after
`xwl_screen_post_damage` in certain conditions. This means we need to
check if the window is already in the list to avoid adding the same
window twice which will lead to list corruption resulting in server freeze
in `xwl_screen_post_damage`.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
With Wayland 1.21 being our baseline, we do not need to compile
wl_pointer.axis_v120 conditionally.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
With libdecor, when the state changes (in the configure handler), we
need to commit the libdecor frame but also the wl_surface, otherwise
the surface is left in a uncommitted state until a wl_surface commit
eventually occurs later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: c74c6add3e - xwayland: add optional support for libdecor
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
If the dmabuf protocol's feedback object gave us a new list of
modifiers, send PresentCompleteModeSuboptimalCopy to the client
to inform them that they need to call GetSupportedModifiers.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This adds to xwl_glamor_is_modifier_supported, where if feedback
is in use we will check that the format/mod is allowed in any
device advertised by the compositor.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Move dev_formats declaration to where it's used in
xwl_feedback_is_modifier_supported
* Add curly braces around multi-line statement in
xwl_glamor_is_modifier_supported ]
If protocol version 4 of linux_dmabuf is in use, then the compositor
may not return anything with the modifiers event. We instead
will return the formats/mods reported for the main device.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Move main_dev declaration to where it's used in
xwl_glamor_get_formats
* Add empty line between variable declaration and comment ]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Sort protocol #includes lexically.
* memcpy to &xwl_feedback->main_dev directly in
xwl_dmabuf_feedback_main_device. ]
This creates xwl_add_format_and_mod_to_list, which is a helper
that adds a format/mod combo to a xwl_format* list. This will
be used by both the modifier event handling and the tranche
format handling.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
There are systems where softpipe is the default renderer,
e.g. when llvmpipe is not is not available. Using glamor
on such systems is never a good idea.
This mirrors what commit 0a9415cf79
did for llvmpipe.
Closes: #1417
Signed-off-by: Ivan A. Melnikov <iv@altlinux.org>
For details on the protocol itself see the Wayland merge request:
https://gitlab.freedesktop.org/wayland/wayland/-/merge_requests/72
The v120 event has a value base of 120, so one wheel detent is 120, half a
wheel is 60, etc. This is the API Windows has been using since Vista but it
requires HW support from the device. Logitech mice and many Microsoft mice of
the last decade or so have support and it's enabled in the kernel since v5.0.
The new events replace wl_pointer.axis_discrete events, once you bind to
wl_pointer >= 8 you only get the v120 events. So backwards compatibility
is simple, we just multiply the discrete events if we get them and
treat everything as 120 event internally.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Leasable displays do not have any actual associated Wayland output and
are not available to regular X11 clients and left entirely to the
application who requests the lease.
As these are not actually managed by the Wayland compositor and left
entirely to the "lessee" application, the viewporter protocol required
for the XRandR emulation is not usable on such devices.
We should therefore not advertise the XRandR emulated modes for those
leasable displays.
This also solves a problem with implementations of glXGetMscRateOML()
which is used notably by Chromium/Electron. Applications using this
which will begin lagging/stuttering exponentially over
time, trying to look up a non-existent mode with 0x0 as returned by
XF86VidModeGetModeLine() with XRandR emulation for such devices.
See-also: https://github.com/labwc/labwc/issues/553
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Make sure info->active and info->vt_active are false after
dropping drm master.
Normally, this is done when pausing the first input device, so it
breaks when there are no input device at all.
Fixes: da9d012a9 ("xf86/logind: Fix drm_drop_master before vt_reldisp")
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1387
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
The X server swapping code is a huge attack surface, much of this code
is untested and prone to security issues. The use-case of byte-swapped
clients is very niche, so let's disable this by default and allow it
only when the respective config option or commandline flag is given.
For Xorg, this adds the ServerFlag "AllowByteSwappedClients" "on".
For all DDX, this adds the commandline options +byteswappedclients and
-byteswappedclients to enable or disable, respectively.
Fixes#1201https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1029
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 5145742fb6 accidentally bumped the videodrv ABI version from 26.0
to 26.6 in one go.
Change it back to 26.1 as per the documented process for minor additions.
Fixes: 5145742fb6 - randr: introduce rrCrtcGetInfo DDX function
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This fixes an issue with GLFW-based games failing to set the resolution
when the user request to switch back to the native display mode.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This allows rrCrtcGetInfo to override the values in the XRRCrtcGetInfo
reply. One use case is to allow Xwayland to return the current emulated
mode for the specific client instead of the global mode.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Implements the xwayland_shell protocol which makes the surface
association happen via a shared serial, rather than sharing a wl_surface
resource ID across an X atom.
This solves a race that can happen if the wl_surface
associated with a WL_SURFACE_ID for a window was destroyed before the
update of the atom was processed by the compositor and another surface
(or other object) had taken its id due to recycling.
Closes: #1157
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
If atomic modesetting is to be enabled in the configuration file, log
whether this is supported and eventually enabled or disabled.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
The modesetting driver has atomic modesetting disabled by default but
can be enabled (if supported) using a configuration option.
Add this option in the man page.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This adds support for TearFree page flips to eliminate tearing without the
use of a compositor. It allocates two shadow buffers for each CRTC, a back
buffer and a front buffer, and uses damage tracking to minimize excessive
copying between buffers and skip unnecessary flips when the screen's
contents remain unchanged. It works on transformed screens too, such as
rotated and scaled CRTCs.
When PageFlip is enabled, TearFree won't force fullscreen DRI clients to
synchronize their page flips to the vblank interval.
TearFree is disabled by default.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
The DRM event queue in the kernel is quite small and can be easily
exhausted by DRI clients. When the event queue is full, that means nothing
can be queued onto it anymore, which can lead to incorrect presentation
times for DRI clients and failure when attempting to queue a page flip.
To make matters worse, once an event is placed onto the kernel's event
queue, there's no straightforward way to prematurely remove it from the
kernel's event queue in userspace, which means that aborting a sequence
number doesn't free up space in the event queue.
Since vblank events from DRI clients are the largest consumers of the
event queue, and since it's often easy to know the desired target MSC of
their vblank events without querying the kernel for a CRTC's current MSC,
we can coalesce vblank events occurring at the same MSC such that only one
of them is placed onto the kernel's event queue, instead of allowing
duplicate vblank events to pollute the event queue.
This is achieved by tracking the next kernel-queued event's MSC on a
per-CRTC basis and then running all of that CRTC's vblank event handlers
which have reached their target MSC when the queued MSC is signaled.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
do_queue_flip_on_crtc() is about to be used to flip buffers other than the
primary scanout (`ms->drmmode.fb_id`), so make it generic to accept any
frame buffer ID, as well as x and y coordinates in the frame buffer, to
flip on a given CRTC. Move the retry logic from queue_flip_on_crtc() into
it as well, so that it's robust for all callers.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Shadow buffers are about to be used for TearFree, so make the shadow buffer
helpers generic such that they can be used to create arbitrary per-CRTC
shadows aside from just the per-CRTC rotated buffer.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
xf86RotateCrtcRedisplay() is about to be used outside of xf86Rotate.c in
order to copy transformed pixmaps, so fix up its interface by specifying
the source drawable and destination pixmap rather than assuming the root
drawable and rotated pixmap, respectively. In addition, add an argument to
make xf86RotateCrtcRedisplay() not perform any transformations, which is an
indicator that it should only copy a transformed pixmap rather than
actually transform a pixmap.
These changes make it possible to use xf86RotateCrtcRedisplay() to not
only copy transformed pixmaps, but also actually transform pixmaps, making
it very useful outside of xf86Rotate.c.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Updated the for-loop that iterates over the received EGLConfigs to
include the very first EGLConfig with index 0.
Signed-off-by: Doğukan Korkmaztürk <dkorkmazturk@nvidia.com>
Fixes: 8469241592 - xwayland: Add EGL-backed GLX provider
The virgl driver exposes the name of the host renderer which might be llvmpipe.
In this case we still need glamor to be initialized.
Only check if the renderer starts with llvmpipe (which is what llvmpipe exposes).
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Simon Ser
Olivier Fourdan
Michel Dänzer
Minh Phan
Tamura Dai
Austin Shafer
Ivan A. Melnikov
Peter Hutterer
Jeremy Huddleston Sequoia
Joshua Ashton
Jocelyn Falempe
Sultan Alsawaf
John D Pell
Doğukan Korkmaztürk
Corentin Noël