This old behavior was used as a workaround for the menubar behavior in the older server,
but we handle it better now and need to update our screens when we toggle the rootless
state instead.
(cherry picked from commit 508aa95bc2cd3fdc3dff448ec090919bf807d153)
- Example: mode 1280x1024, panned area 1281x1024
panned_area.x2 = 1281
mode.width = 1280
If you substract 1280 from 1281, then that leaves you with one.
Which is the one pixel that you need to move to actually see the last pixel collumn.
Substracting 1 from this will consistently prevent you from seeing the right and bottom edge.
- Pass $(CPP) & $(AWK) settings from configure to sdksyms.sh
- Only reset sdk variable (tracks if header is part of sdk) if
a filename is included on the cpp # <line-no> <filename> line,
since Sun compilers omit filename when it is unchanged from
previous line.
Restoring it unconditionally means we restore to whatever tty_mode has as
default value (i.e. 0). K_RAW happens to be 0x00, so we always restore to raw
mode if allowEmptyInput is off.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Ubuntu uses mawk by default, but it doesn't understand posix character
classes (which are locale dependent, and this patch uses only valid C
identifiers).
Also make sure awk runs with LC_ALL=C to match the regex patterns.
fd.o bugzilla #11128
Fix crashes when using the '-refresh rate-in-Hz' option in -fullscreen mode and using a DirectDraw engine.
On failure (typically 0x80004001 DDERR_UNSUPPORTED), use the default refresh rate for the driver, instead of the
entered value.
Also fix some nearby error reporting
Copyright (C) Colin Harrison 2005-2008
http://www.straightrunning.com/XmingNotes/http://sourceforge.net/projects/xming/
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The function winMultiWindowGetTransientFor() crashes, due to a bogus pointer
dereference, but this fact was previously hidden by the function not being called!
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
- Add active field to crtc.
- Set gamma (only) whenever a crtc becomes active.
- Check for xf86_config being NULL.
- Increase crtc abi to 3.
- A few other fixes.
fd.o bugzilla #4491
Transparent icon backgrounds appear with black stripes as mask data is incorrectly aligned.
Modified the icon DDB bitmap data alignment to 16 bits
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
- The Gamma values from the monitor section are now used during initial config.
- The old colormap system is disabled when gamma set hook is available.
- Gamma values are now persistent for the lifetime of the xserver.
- This requires no driver changes and should be driver ABI compatible.
Fix the native HWND atom identifier to be initialized correctly, when built without external WM support
This is neccessary for native window naming to work correctly in multiwindow internal WM mode.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Bring Cygwin/X up to date with the change to damage-based shadow framebuffer.
Register the screen bitmap as the shadow framebuffer after screen resources
are created.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
When we are looking up the screen for an event, we need to take
into account the fact that the event may have been delivered to the
"peer window" that we create when implementing GLX. Since we only
ever create one such window per screen, just add a single peer_win
field to EphyrHostScreen.
The Cygwin/X build has been broken for a long time, probably since modular X
This patch fixes up configure/makefile and some general build issues (#18568)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
When a driver uses a crtc during device detection, the scrn has not yet been
configured and virtualX/virtualY are still zero. This caused the X server
to try and allocate a shadow frame buffer, which couldn't work.
Detect this by checking for zero virtualX/virtualY values.
Signed-off-by: Keith Packard <keithp@keithp.com>
pScreen->width/height are not initialized when doing initial mode setting,
which makes this function incorrectly fail. Using scrn->virtualX should work
in all cases though.
Bug 19017 reports a crash in xf86CrtcSetModeTransform when doing a modeset
for output probing, long before the screen array is initialized; that was
caused by a work-around to set pScreen->width/height so that xf86CrtcFitsScreen
could find the right values.
Signed-off-by: Keith Packard <keithp@keithp.com>
The shadow frame buffer and other data used for rotation need to be freed
when the crtc is disabled, not just when rotation is disabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the basename of header file processed by cpp matches $top_srcdir,
check for extern symbols in the output, and add to the xorg_symbols
vector.
Possibly a better solution then using this script would be to somehow
tell the linker to not drop any symbols from the binary being generated.
Thanks to David Miller for noticing a make problem with sdksyms.c
not being regenerated when sdksyms.sh is updated. This is not yet the
best solution; automake generates dependency for sdksyms.o, but the
build really should also regenerate sdksyms.c when sdksyms.o needs to
be regenerated.
Export the symbols in miext/cw/cw.h. These symbols are in libxaa, and
at least the nvidia driver uses them. Maybe cw.h should be installed
in the sdk.
The awk script was incorrectly referencing the struct name, and
not the struct variable.
Also added some comments to sdksyms.sh, for the reason it generates
the "symbol table" and add a message to the generated file, telling
is was automatically generated.
Traditional posix awk doesn't know about \W and whilst we check that
awk exists in configure.ac we don't check which awk we are using.
This corrects symbol generation for posix only awk.
The kbd driver may send events during device initialisation, and these events
need the EQ set up already.
X.Org Bug 18890 <http://bugs.freedesktop.org/show_bug.cgi?id=18890>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
As suggested by Julien Cristau
This is an follow-up to
commit 9c5dd7337f
Author: Peter Hutterer <peter.hutterer@redhat.com>
Date: Wed Dec 3 14:24:25 2008 +1000
Let the DDX decide on the XkbRulesDefaults.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Acked-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
drv and idev are only set for SDs, but are only dereferenced for SDs too, so
initializing them to NULL is safe.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
These are private symbols, but used by the X Server.
The newly exported symbols were not added to the sdk headers.
Optionally, libxf86config could be compiled without hidden symbols
when being installed.
Thanks to Maarten Maathuis for noticing the problem.
It is declared as
<hash>ifdef HAVE_ACPI
Bool xf86acpiDisableFlag = FALSE;
<hash>endif
in hw/xfree86/common/xf86Globals.c
but not protected by the ifdef in the sdk header xf86Priv.h, what
caused a build failure in the tinderbox, due to the address of the
symbol being taken (to ensure it is available) in sdksyms.c.
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
If not taking the symbol addresses, linkage will break badly, as not
all symbols will be present, and it also requires changing library order,
and/or making some changes like the "libosandcommon".
This table should be modified to be generated automatically, as
it is required to "fool" the compiler/loader into adding all required
symbols to the X Server.
Those tables were once used to decide what symbols are visible to
modules, but they were outdated. The only real usage was that, since
it was taking the address of symbols, linkage should fail if the
symbols were not available.
Now the proper way to make symbols available to modules should
be to use the _X_EXPORT macro, or not compile with hidden symbols,
so that all symbols would be available.
All symbols in the tables were revised to ensure they are exported,
and only symbols that were not exported are ClientSleepUntil() and
DuplicateModule(), that were not in the sdk for quite some time
already, and should not have any users outside of the X Server
(and/or builtin modules).
The attribute should be set on header files to make it easier to
manage what symbols are available to modules.
_X_EXPORT should be used in sources only for special cases, like
symbols that must be visible by non video/input driver/modules but
should not be "advertised" in the sdk.
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Also, no need to call ShowCursor when SetCursorPosition already does it
Based on a previous patch by Maarten Maathuis
Signed-off-by: Keith Packard <keithp@keithp.com>
Rather than assuming rules in the CoreKeyboardProc, init the default rules in
InitCoreDevices, then re-use them later.
In the xfree86 DDX, set the rules to "base" or "evdev", depending on whether
we'll load kbd or evdev.
If we create a new MD, use pc105,us as default and re-use the rules file used
previously.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
When leaving 3D games such as quake3 or sauerbraten, a cursor may stay on the
screen. This is caused by one run of SW rendering for the SD, even though the
SD was attached to the VCP and thus has HW rendering capabilities.
Check for the SD's attachment (like in all other functions) before deciding on
SW or HW rendering.
X.Org Bug 16805 <http://bugs.freedesktop.org/show_bug.cgi?id=16805>
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Just ignore devices after MAXDEVICES has been reached, but warn the user that
the devices are ignored.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
This is done to actually change DIX_CFLAGS, as not all "modules" use
XORG_CFLAGS.
Also export the symbols that are required by other modules after
the change.
- Remove remaining references to XFree86-Misc options AllowNonLocalModInDev
and DisableModInDev.
- Remove remaining references to grab-breaking keys & associated options.
- Update description of Ctrl-Alt-Backspace to new -retro/DontZap defaults.
- Add description of new options -modalias and -showopts.
- Update list of modules loaded by default.
- Update input driver references from keyboard to evdev & kbd.
- Update list of driver man pages to match xf86-*-* drivers with man pages.
- Add See Also section to exa man page.
and various formatting/typo/etc. fixes.
The Xorg/xorg.conf sections on input device selection could use further
updates to better match the current state of HAL-enabled configuration.
Jeremy Huddleston
Maarten Maathuis
Adam Jackson
Alan Coopersmith
Peter Hutterer
Eamon Walsh
Paulo Cesar Pereira de Andrade
Colin Harrison
Joe Krahn
Jon TURNEY
Matthias Hopf
Owen W. Taylor
Robert Noland
Keith Packard
Cooper Yuan
Peter Hutterer
Simon Thum
Benjamin Close
Matthieu Herrb
Timo Aaltonen
Stuart Bennett
Kristian Høgsberg