This field isn't used by any drivers, and also better belongs into
the corresponding extension instead of OS adaption layer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Move extra complexity out of the dispatch functions, so they're
really just switch/case statements calling the actual handler procs.
Preparation for further steps.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
These dispatcher functions are much more complex than they're usually are
(just switch/case statement). Bring them in line with the standard scheme
used in the Xserver, so further steps become easier.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
These dispatcher functions are much more complex than they're usually are
(just switch/case statement). Bring them in line with the standard scheme
used in the Xserver, so further steps become easier.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The current way of switching between Xinerama and single-screen handlers
is quite complicated and needs call vector tables that are changed on
the fly, which in turn makes dispatching more complicated.
Reworking this into a simple and straight code flow, where individual request
procs just look at a flag to decide whether to call the Xinerama or single
screen version.
This isn't just much easier to understand (and debug), but also removes the need
or the call vectors, thus allowing further simplification of the dispatcher.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
A little bit of code simplification by using static initialization
of struct right at the point of declaration. Also dropping a few now
unneccessary zero assignments.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Coherently moving all reply struct decls and assignments into static
initialization right at declaration, just before it is getting byte-
swapped and sent out. Zero-assignments can be dropped here, since the
compiler automatically initializes all other fields to zero.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Some requests using different structs dependending on which protocol version
(v1 vs. v2) had been selected. That's is handled by coverting v1 structs into v2,
before proceeding with the actual handling.
The code flow of this is very complex and hard to understand. Cleaning this up
in several smaller steps, that are easier to digest.
This part moves the request payload structs (or pointers to them) into the
per-version branches. Within each branch following our usual scheme for
extension request handlers (eg. using the REQUEST*() macros and having a
pointer named `stuff` to the current request struct)
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Some requests using different structs dependending on which protocol version
(v1 vs. v2) had been selected. That's is handled by coverting v1 structs into v2,
before proceeding with the actual handling.
The code flow of this is very complex and hard to understand. Cleaning this up
in several smaller steps, that are easier to digest.
This part is splitting the huge request handlers into upper and lower half,
where the upper is doing the version check and converting v1 requests into v2,
while the lower one is doing the actual request processing, operating on the
struct pointer passed in from the upper one, instead of the client struct's
request buffer.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Some requests using different structs dependending on which protocol version
(v1 vs. v2) had been selected. That's is handled by coverting v1 structs into v2,
before proceeding with the actual handling.
The code flow of this is very complex and hard to understand. Cleaning this up
in several smaller steps, that are easier to digest.
This moving the request size check into the if-version-X branches, to make it
some bit easier to undertand.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
These dispatcher functions are much more complex than they're usually are
(just switch/case statement). Bring them in line with the standard scheme
used in the Xserver, so further steps become easier.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
In order to allow simplifying the reply send path, collect the reply
fragments into one buffer, instead of arbitrary number of WriteToClient()
calls. This also makes it much easier for potentially new purely packet-based
transports which (eg. binder) that would need their own stream parsing logic.
This xres function is an exceptionally hard case, since payload is constructed
step by step, and it's size only known when finished. The current way of the
fragment handling still has lots of room for improvement (eg. using very small
number of allocations), but leaving this for later exercise.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Collect the few bits in a local array, so one WriteToClient() call is
sufficient. That's also easing further simplifications in upcoming commits.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Simplify allocaton by putting the small temporary int array onto stack.
This also allows further simplifications by upcoming commits.
The upper bound is determined by the number of resource types registered
in the server - this can only be increased by writing new extensions.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Collect the few bits in a local array, so one WriteToClient() call is
sufficient. That's also easing further simplifications in upcoming commits.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Simplify allocaton by putting the small temporary int array onto stack.
This also allows further simplifications by upcoming commits.
Note: there's an upper bound by compile time defines (theoretically, can
be increased by special cmdline args, that virtually nobody ever using).
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
When using static struct initialization, fields not explicitly
stated are automatically zero.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Wrapping ScreenRec's function pointers is problematic for many reasons, so
use the new pixmap destroy notify hook instead.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Wrapping ScreenRec's function pointers is problematic for many reasons, so
use the new pixmap destroy notify hook instead.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Wrapping ScreenRec's function pointers is problematic for many reasons, so
use the new screen close notify hook instead.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Wrapping ScreenRec's function pointers is problematic for many reasons, so
use the new screen close notify hook instead.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Wrapping ScreenRec's function pointers is problematic for many reasons, so
use the new screen close notify hook instead.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Wrapping ScreenRec's function pointers is problematic for many reasons, so
use the new window destructor hook instead.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Direct calls to ScreenRec->DestroyPixmap() blocks cleaning up the wrapping
jungle, so use the proper dix function instead.
See: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1754
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Direct calls to ScreenRec->DestroyPixmap() blocks cleaning up the wrapping
jungle, so use the proper dix function instead.
See: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1754
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
The OS abstraction isn't really the right place for those flags,
they are're probably better off in their corresponding extensions.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1519>
It's more robust / easier understandable programming style to use explicit
switch statements, case'ing on the constants defined in the protocol header,
instead of implicitly via a some opaque call table. It's also done this
way in the other extensions, so making the code a bit more consistent.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1591>
When using struct initializers, all fields not set explicitly are zero.
Also no need to swap fields that are known to be zero.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1591>
The `majorVersion` and `minorVersion` fields are CARD16, thus need to be swapped.
OTOH, the lengths field is zero anyways, so no need to swap it.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1591>
Right now, we're assuming that even when deep nesting involved, the proc
vector is always set to a valid function. One the one hand it requires
extra dummy procs in some cases, OTOH it's making upcoming refactoring
of the code flow unnecessarily complex.
The big plot (of subsequent commits) is splitting out the extension's
(and possibly subsystem's) special logic out of the wrapping chain and
let them be executed independently from the DDX/drivers - when applicable
even only when the pixmap is really destroyed (not just unref'ed).
(At some later point, it might even become be actually a valid situation
that DestroyPixmap vector really being NULL.)
See: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1754
See: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1755
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1709>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1639>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1639>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1639>
The request struct's length fields aren't used anymore - we have the
client->req_len field instead, which also is bigreq-compatible.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1639>
Enrico Weigelt, metux IT consult