This hook wasn't used by any DDX. Device addition and removal is handled by
the config backend, so we don't need to do anything special that during the
ListInputDevices request processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
In theory, these hooks were to be used for DDX-specific device enablement.
None of the DDXs however did anything here. Now we call DEVICE_INIT on all
devices when they are added, so the xfree86 DDX as the only one with real
code didn't do anything here.
kdrive checked for device validity but that's already handled in
ProcXOpenDevice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Instead of shoving it in rather unrelated places, move acceleration init
into xf86NewInputDevice.
Caveat: It's not clear atm how relevant other callers of ActivateDevice
(like OpenDevice) actually are.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Two names pointing to the same struct for over 7 years now. Remove the
define, if drivers don't want to change they can always do the typedef
themselves.
Rename all "LocalDevicePtr local" to "InputInfoPtr pInfo".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Input driver messages are only standardised by convention, with the drivers
prefixing the device name to most messages. This makes it rather hard to
grep on "evdev" for example when looking for the evdev ouput.
This patch adds three new logging functions, modeled after xf86DrvMsg(), the
logging function for output drivers. New functions are
xf86IDrvMsg() - input driver log message in default verbosity.
xf86IDrvMsgVerb() - input driver log message in specified verbosity.
xf86VIDrvMsgVerb() - same as xf86IDrvMsgVerb() but takes a varargs
argument.
Default log format is <driver name>: <device name>: <message>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Make xf86AllocateInput static in the process, this function is only called
from one location.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Right now, Xephyr and others don't get to use XKB on the slave devices.
Which works given that no-one cares about SDs just yet but event processing
is different if the ProcessInputProc isn't wrapped properly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
From the documentation:
"This is mainly to allow a touch screen to be used with netscape and other
browsers which do strange things if the mouse moves between button down and
button up."
CLOSED - NOTOURBUG
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
PreInit returns a status code. Let's use that instead of having it report
Success in some cases but not set the XI86_CONFIGURED flag and thus signal
an init failure.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
These defines have been write-only for a while now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
ActivateGrab and DeactivateGrab are set in AddInputDevice() already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No-one but the joystick driver uses it and that one should be using NIDR
instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
config_info is the only reliable indicator we have in the server for
duplicate devices (drivers can test for maj/min on fds as well). Don't set
this after the device has been initialized but assume it's important enough
to set during NIDR.
This makes the option "config_info" available to the drivers as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The main change introduced in this patch is the removal of the
back-and-forth between DDX and the driver.
The DDX now allocates the InputInfoRec and fills it with default values. The
DDX processes common options (and module-specific default options, if
appropriate) before passing the initialised struct to the driver.
The driver may do module-specific initializations and return Success or an
error code in the case of a failure.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
None of them do anything useful now that pointer acceleration is
entirely handled in the server. (Does not completely nuke yet,
since that would be an API/ABI break.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Because some EnterVT code needs to remove it self from the
call chain, we need to fix all of the wrappers to correctly
unwrap/rewrap during the call chain. This is a follow-on to the fix
for bug 27114 in commit 68a9ee8370.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Jesse Barnes <jesse.barnes@intel.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Although vendor and board naming are used to create the configure file, the
server doesn't actually use it when fetching such file and probing devices.
Reported-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
X server suffers in startup time when relying on the pciaccess's linear search
to fetch vendor and video device name from PCI ID file (when existent). Such
names are only used to write the log, which may be superfluous. This
information often is provided by the drivers or likewise users can get the it
using external tools like lspci or scanpci.
This patch remove the references of those functions from X start up.
Reported-by: Richard Barnette <jrbarnette@chromium.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Richard Barnette <jrbarnette@chromium.org>
Reviewed-by: James Cloos <cloos@jhcloos.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Often we want to apply a driver specific option to a set of devices and
don't care how the driver was selected for that device. The MatchDriver
entry can be used to match the current driver string:
MatchDriver "evdev|mouse"
Option "Emulate3Buttons" "yes"
The driver string is a case sensitive match.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently when there multiple InputClass entries of the same type, only
the last entry is used and the previous ones are ignored. Instead,
multiple entries are used to create multiple matching conditions.
For instance, an InputClass with
MatchProduct "foo"
MatchProduct "bar"
will require that the device's product name contain both foo and bar.
This provides a complement to the || style matching when an entry is
split using the "|" token.
The xorg.conf man page has added an example to hopefully clarify the two
types of compound matches.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:
MatchUSBID "046d:*"
The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:
MatchPnPID "WACf*"
A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Allow InputClass sections to match against the running operating system
to narrow the application of rules. An example where this could be used
is to specify that the default input driver on Linux is evdev while it's
mouse/kbd everywhere else.
The operating system name is the same as `uname -s`, and matching is
case-insensitive.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InputClassMatches was starting to get a little hairy with all the loops
over the tokenized match strings. This adds code, but makes it easier to
read and add new matches.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Jamey Sharp <jamey at minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
The move of the PCI device id probing into a separate file neglected to
return the number of found devices, and so the PCI devices were being
overwritten by the default entries for vesa and fbdev.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tiago Vignatti <tiago.vignatti@nokia.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
commit c2d0b3b437
"xfree86: store the InputAttributes in the input device."
introduced the new API. Bump the input version so drivers can handle this
appropriately.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301.
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
InputAttributes largely decide which configuration values get merged from
the xorg.conf.d snippets. While they are available in the config backend,
they are not available for any other callers of NewInputDeviceRequest().
Drivers implementing driver-side hotplugging do not have access to these
attributes and cannot have xorg.conf.d snippets specific to dependent
devices. For example, the following case cannot work right now:
Section "InputClass"
MatchProduct "Wacom"
Option "PressCurve" "0 0 100 100"
...
EndSection
Section "InputClass"
MatchProduct "Wacom"
MatchProduct "eraser"
Option "PressCurve" "10 10 50 50"
...
EndSection
The second section is not triggered, as the wacom driver cannot supply the
InputAttributes to NewInputDeviceRequest().
Add the attributes to the IDevRec and merge them into the InputInfoRec to
make them accessible in the driver. This changes the ABI for input drivers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Peter Hutterer
Simon Thum
Alan Coopersmith
Keith Packard
Tiago Vignatti
Mikhail Gusarov
Dan Nicholson
Jamey Sharp
Chris Wilson