When using DRI3+Present with PRIME render offload, sometimes there is
a mismatch between the stride of the to-be-presented Pixmap and the
frontbuffer. The current code would reject a pageflip present in this
case if atomic modesetting is not enabled, ie. always, as atomic
modesetting is disabled by default due to brokeness in the current
modesetting-ddx.
Fullscreen presents without page flipping however trigger the copy
path as fallback, which causes not only unreliable presentation timing
and degraded performance, but also massive tearing artifacts due to
rendering to the framebuffer without any hardware sync to vblank.
Tearing is extra awful on modesetting-ddx because glamor afaics seems
to use drawing of a textured triangle strip for the copy implementation,
not a dedicated blitter engine. The rasterization pattern creates extra
awful tearing artifacts.
We can do better: According to a tip from Michel Daenzer (thanks!),
at least atomic modesetting capable kms drivers should be able to
reliably change scanout stride during a pageflip, even if atomic
modesetting is not actually enabled for the modesetting client.
This commit adds detection logic to find out if the underlying kms
driver is atomic_modeset_capable, and if so, it no longer rejects
page flip presents on mismatched stride between new Pixmap and
frontbuffer.
We (ab)use a call to drmSetClientCap(ms->fd, DRM_CLIENT_CAP_ATOMIC, 0);
for this purpose. The call itself has no practical effect, as it
requests disabling atomic mode, although atomic mode is disabled by
default. However, the return value of drmSetClientCap() tells us if the
underlying kms driver is atomic modesetting capable: An atomic driver
will return 0 for success. A legacy non-atomic driver will return a
non-zero error code, either -EINVAL for early atomic Linux versions
4.0 - 4.19 (or for non-atomic Linux 3.x and earlier), or -EOPNOTSUPP
for Linux 4.20 and later.
Testing on a MacBookPro 2017 with Intel Kabylake display server gpu +
AMD Polaris11 as prime renderoffload gpu, X-Server master + Mesa 21.0.3
show improvement from unbearable tearing to perfect, despite a stride
mismatch between display gpu and Pixmap of 11776 Bytes vs. 11520
Bytes. That this is correct behaviour was also confirmed by comparing the
behaviour and .check_flip implementation of the patched modesetting-ddx
against the current intel-ddx SNA Present implementation.
Please consider merging this patch before the server-1.21 branch point.
This patch could also be cherry-picked into the server 1.20 branch to
fix the same limitation.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
(cherry picked from commit 8f8ebf870b)
A lot of that code is the same as in xf86-amdgpu and xf86-nouveau drivers. By removing that functions from
ms namespace we can move that code to common implementation.
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
(cherry picked from commit 5be3b80b8d)
The miPointerSpriteFunc swcursor code expects there to only be a single
framebuffer and when the cursor moves it will undo the damage of the
previous draw, potentially overwriting what ever is there in a new
framebuffer installed after a flip.
This leads to all kind of artifacts, so we need to disable pageflipping
when a swcursor is used.
The code for this has shamelessly been copied from the xf86-video-amdgpu
code.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/issues/828
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0aaac8d783)
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@displaylink.com>
ms_present_get_crtc() returns an RRCrtcPtr, but derives it from a xf86CrtcPtr
found via ms_dri2_crtc_covering_drawable()=>ms_covering_crtc(). As a result, it
depends on all associated DIX ScreenRecs having an xf86CrtcConfigPtr DDX
private.
Some DIX ScreenRecs don't have an xf86CrtcConfigPtr DDX private, but do have an
rrScrPrivPtr DDX private. Given that we can derive all of the information we
need from RandR, we can support these screens by avoiding the use of xf86Crtc.
This change implements an RandR-based path for ms_present_get_crtc(), allowing
drawables to successfully fall back to syncing to the primary output, even if
the slave doesn't have an xf86CrtcConfigPtr DDX private.
Without this change, if a slave doesn't have an xf86CrtcConfigPtr DDX private,
drawables will fall back to 1 FPS if they overlap an output on that slave.
Signed-off-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit 562c7888be)
GBM objects were never destroyed after looking for format and
modifier compatibility when deciding whether flipping or copying
a presented pixmap.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106106
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
With earlier commit the required version was bumped to 2.4.89, thus the
guards always evaluate to true.
Fixes: e4e3447603 ("Add RandR leases with modesetting driver support
[v6]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add support for 'check_flip2' so that the present core can know
why it is impossible to flip in that scenario. The core can then
let know the client that the buffer format/modifier is suboptimal.
v2: No longer need to implement 'check_flip'
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
To make sure we also use the same primary plane and to avoid
mixing uses of two APIs, it is better to always use the atomic
modesetting API when possible.
v2: Don't use mode_output->connector_id
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This provides an API wrapper around the kernel interface for queueing
a vblank event, simplifying all of the callers.
v2: Fix missing '|' in computing vbl.request.type
v3: Remove spurious bit of next patch (thanks, Michel Dänzer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The glamor_egl module that the GLAMOR paths are using is only built if
GLAMOR_HAS_GBM is true, and there's no plan for implementing the
module without GBM. Simplify modesetting's code as a result.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The common page flip handle framework can be shared with DRI2
page flip.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This uses the wrapper in case we need to emulate poll with select
as we do on Windows.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
[fix copied from 40191d82370e in xf86-video-ati]
Without this, we end up setting rotated CRTCs back to their previous
framebuffer right after we perform a rotation. Reproducer:
- Have two monitors connected at the same resolution
- Rotate one monitor from normal straight to inverted
- Watch as the monitor you didn't rotate either freezes or shows intense
flickering
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes build errors of:
present.c: In function 'ms_do_pageflip':
present.c:410:17: error: 'drmmode_bo' has no member named 'gbm'
new_front_bo.gbm = glamor_gbm_bo_from_pixmap(screen, new_front);
^
present.c:412:22: error: 'drmmode_bo' has no member named 'gbm'
if (!new_front_bo.gbm) {
^
present.c: In function 'ms_present_check_flip':
present.c:536:36: error: 'drmmode_bo' has no member named 'gbm'
if (drmmode_crtc->rotate_bo.gbm)
^
Introduced by commit 13c7d53d
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This fixes modesetting when glamor is disabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Based on code by Keith Packard, Eric Anholt, and Jason Ekstrand.
v2:
- Fix double free and flip_count underrun (caught by Mario Kleiner).
- Don't leak flip_vblank_event on the error_out path (Mario).
- Use the updated ms_flush_drm_events API (Mario, Ken).
v3: Hack around DPMS shenanigans. If all monitors are DPMS off, then
there is no active framebuffer; attempting to pageflip will hit the
error_undo paths, causing us to drmModeRmFB with no framebuffer,
which confuses the kernel into doing full modesets and generally
breaks things. To avoid this, make ms_present_check_flip check that
some CRTCs are enabled and DPMS on. This is an ugly hack that would
get better with atomic modesetting, or some core Present work.
v4:
- Don't do pageflipping if CRTCs are rotated (caught by Jason Ekstrand).
- Make pageflipping optional (Option "PageFlip" in xorg.conf.d), but
enabled by default.
v5: Initialize num_crtcs_on to 0 (caught by Michel Dänzer).
[airlied: took over]
v6: merge async flip support from Mario Kleiner
free sequence after failed vblank queue
handle unflip while DPMS'ed off (Michel)
move flip tracking into its own structure, and
fix up reference counting issues, and add comments.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, ms_flush_drm_events() returned a boolean value, and it was
very easy to interpret the meaning incorrectly. Now, we return an
integer value.
The possible outcomes of this call are:
- poll() raised an error (formerly TRUE, now -1 - poll's return value)
- poll() said there are no events (formerly TRUE, now 0).
- drmHandleEvent() raised an error (formerly FALSE, now the negative
value returned by drmHandleEvent).
- An event was successfully handled (formerly TRUE, now 1).
The nice part is that this allows you to distinguish errors (< 0),
nothing to do (= 0), and success (1). We no longer conflate errors
with success.
v2: Change ms_present_queue_vblank to < 0 instead of <= 0, fixing an
unintentional behavior change. libdrm may return EBUSY if it's
received EINTR for more than a second straight; just keep retrying
in that case. Suggested by Jasper St. Pierre.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
present.c: In function 'ms_present_flush':
present.c:204:9: error: implicit declaration of function
'glamor_block_handler'
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87858
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
modesetting hooked up vblank support for DRI2, but was missing support
for vblanks in Present.
This is mostly copy and pasted from Keith's code in the intel driver.
v2: Use ms_crtc_msc_to_kernel_msc in ms_present_queue_vblank to hook
up the vblank_offset workaround for bogus MSC values (which the
DRI2 code already did).
Also simplify the ms_present_get_crtc function. vblank.c already
implements the functionality; we just need to convert types.
v3: Fix ms_flush_drm_events return code. I'd copied code where 0 meant
success into a function that returned a boolean, so the return code
was always backwards.
Also add DebugPresent calls in ms_present_vblank_{handler,abort}.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Mario Kleiner
Łukasz Spintzyk
Hans de Goede
Alex Goins
Louis-Francis Ratté-Boulianne
Adam Jackson
Emil Velikov
Keith Packard
Eric Anholt
Qiang Yu
Lyude Paul
Alan Coopersmith
Dave Airlie
Kenneth Graunke