The changes to miPointerSetPosition interface from int->double breaks
the SIS driver build, so time to bump this.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DGA only handles master devices but it does intercept slave device events as
well (since the event handlers are per event type, not per device).
The DGA code must thus call into UpdateDeviceState to reset the button/key
state on the slave device before it discards the remainder of the event.
Test case:
- Passive GrabModeSync on VCP
- Press button
- Enable DGA after ButtonPress
- AllowEvents(SyncPointer)
- Release button
The button release is handled by DGAProcessPointerEvent but the device state
is never updated, so the slave ends up with the button permanently down.
And since the master's button state is the union of the slave states, the
master has the button permanently down.
X.Org Bug 59100 <http://bugs.freedesktop.org/show_bug.cgi?id=59100>
Reported-by: Steven Elliott <selliott4@austin.rr.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reported-by: Steven Elliott <selliott4@austin.rr.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Instead of requiring every mode set to complete successfully, start up
as long as at least one CRTC is working. This avoids failures when one
or more CRTCs can't start due to mode setting conflicts.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This commit regresses dri1 since it moves the drmSetServerInfo from being
called at module load time to extension init time. However DRIScreenInit
relies on this being called before it gets control.
This patches moves the call into DRIScreenInit and seems to work here.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The formatter confused address operators preceded by casts with
bitwise-and expressions, placing spaces on either side of both.
That syntax isn't used by ordinary address operators, however,
so fix them for consistency.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Following commit 37d956e3ac
Author: Keith Packard <keithp@keithp.com>
Date: Mon Sep 10 11:14:20 2012 +1000
xf86: fix compat output selection for no output GPUs
headless servers can no longer startup as we no longer select a compat
output for the fake framebuffer.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56343
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
For non-PCI video devices, such as those found on many ARM embedded
systems, the X server currently requires the BusID option to specify the
full path to the DRM device's sysfs node in order to properly match it
against the probed platform devices.
In order to allow X to start up properly if either the BusID option was
omitted or no configuration is present at all, the first video device is
used by default.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
K_OFF is a slightly broken interface, since if some other process
(cough, systemd) sets the console state to K_UNICODE then it undoes
K_OFF, and now Alt-F2 will switch terminals instead of summoning the
Gnome "run command" dialog.
KDSKBMUTE separates the "don't enqueue events" logic from the keymap, so
doesn't have this problem. Try it first, then continue falling back to
older methods.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=859485
Tested-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These functions are already declared in <X11/fonts/fontproto.h>.
Redeclaring them just for _X_EXPORT causes tons of warnings throughout
xserver, but they need to be declared somewhere to be picked up by
sdksyms.sh. Doing so in a private header limits the warnings to
sdksyms.c; fixing those as well would require changes to fontsproto.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Recent Linux kernels reworked the linux/input.h header file, which is
now part of the "user-space API". The include guard therefore has an
additional additional _UAPI prefix.
Instead of adding another case to the #ifdef, drop any include guard
checks and instead always undefine the BUS_* definitions on Linux.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fix compilation of Xorg DDX without XF86VIDMODE since 6e74fdda, by putting
xf86vmode.c back under the XF86VIDMODE automake conditional it was accidentally
taken out of.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This call is required for external drivers (specifically NVIDIA) that do
not share the xfree86 infrastructure to update the desktop dimensions.
Without it, the driver would update the ScreenRecs but not update the total
dimensions the input code relies on for transformation.
This call is a thin wrapper around the already-existing internal call and
should be backported to all stable series servers, with the minor ABI bump.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CC: Andy Ritger <aritger@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
I noticed that the build-in int10 driver always reports
"Unable to retrieve all of segment 0x0C0000."
even though the entire BIOS data is retrieved with success.
The associated code is in hw/xfree86/int10/generic.c, in the function
xf86ExtendedInitInt10():
if (pci_device_read_rom(pInt->dev, vbiosMem) < V_BIOS_SIZE) {
xf86DrvMsg(screen, X_WARNING,
"Unable to retrieve all of segment 0x0C0000.\n");
}
The function pci_device_read_rom() is from libpciaccess; its return
value is not a size but an error status code: 0 means success.
If pci_device_read_rom() returns 0 for success, the warning is generated.
The proposed patch corrects the evaluation of the return value of
pci_device_read_rom() and of the supplied BIOS size.
Debian bug#686153
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 09e4b78f missed a case.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Remove any reference to mibstore.h and miInitializeBackingStore() from
the documentation.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove more backing store leftovers.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a really awkward interface, since we're calling it well before
the driver knows what device it's going to drive. Drivers with both KMS
and UMS support therefore don't know whether to say they need I/O port
access or not, and have to assume they do.
With this change we now call it only to query whether port access might
be needed; we don't use that to determine whether to call a driver's
probe function or not, instead we call them unconditionally. If the
driver doesn't check whether port access was enabled, they might crash
ungracefully. To accomodate this, we move xorgHWAccess to be explicitly
intentionally exported (sigh xf86Priv.h) so that drivers can check that
before they attempt port access.
v2: Move initial xf86EnableIO() nearer the logic that determines whether
to call it, suggested by Simon Farnsworth.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We load the driver list, then enable I/O, then call driver probe based
on whether I/O enable succeeded. That's bad, because the loaded
security policy might forbid port access. We happen to treat that as
fatal for some reason, which means even drivers that don't need I/O
access (like kms and fbdev) don't get the chance to run. Facepalm.
How about we just make that non-fatal instead, that sounds like a much
better plan.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Pull platform methods into their own sections for legibility, and
rewrite the ifdefs to be more concise.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If we are not seat 0 the following apply:
don't probe any bus other than platform
don't probe any drivers other than platform
assume the first platform device we match on the bus is the primary GPU.
This just adds checks in the correct places to ensure this, and
with this X can now start on a secondary seat for an output device.
v2: fix Seat0 macros
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This solves a race if we are trying to dynamically power off
secondary GPUs. Its not the greatest fix ever but it probably
as good as we can do for now.
The GPU probing causes the devices to be powered up, then when
we scan the PCI bus we get the correct information from the kernel,
rather than a bunch of 0xff due to the device being powered off.
drop gratuitous '&'.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
After we share the pixmap, the backing storage may have changed,
and we need to invalidate and buffers pointing at it.
This fixes GL compositors and prime windows lacking contents initially.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise we can't do fast user switch properly for multiple GPUs.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is set by pre_init not screen init, so if we free it here
and then recycle the server, we lose all the providers.
I think we need to wrap FreeScreen here to do this properly,
will investigate for 1.14 most likely, safer to just leak this
on server exit for now.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit 9d457f9c55 added an array of
DevPrivateSetRec structures in the middle of the ScreenRec, which throws off
extension modules trying to call things like pScreen->DestroyPixmap.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The core RandR screen cleanup now involves cleaning up any GPU screen
associations, and those call down into DDX to clean up the driver. If
the pointers from the xf86 structures back to the core randr
structures are set to NULL at that point, bad things happen.
This patch "knows" that the core RandR close screen is underneath the
xf86 randr close screen function, and so makes sure it gets called
first.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
These are two minor changes, one to reset the pointer to NULL,
after freeing the pixmaps, one to make sure we use the right API for
the master pixmap, though I doubt it'll ever really matter.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
When the drawable disappears we need to free the prime master/slave combos.
This fixes a leak after a prime app is run.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The indenter seems to have gotten confused by initializing arrays of
structs with the struct defined inline - for predefined structs it did
a better job, so match that.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
The RandR CRTC structures are freed when their resource IDs are
destroyed during server shut down, which is before the screen is
closed. Calling back into RandR with stale pointers just segfaults the
server.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Knut Petersen <knut_petersen@t-online.de>
Panning is at odds with CRTC cursor confinement. This disables CRTC cursor
confinement as long as panning is enabled.
Fixes regression introduced in 56c90e29f0.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Let's say - purely for the sake of argument, mind you - that you had a
server GPU with anemic memory bandwidth, and you walked up to it and
plugged in a monitor that was 1920x1080 because that's what happened to
be on the crash cart. Say the memory bandwidth is such that anything
larger than 1280x1024 gets filtered away. Now you're in trouble,
because the established timings section includes a 720x400 mode because
that's what DOS 80x25 is, and that happens to just about match the
physical aspect ratio.
Instead let's reuse the logic from the existing aspect-match path: pick
the larger mode of either the physical aspect ratio or 4:3.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We've had reports of two copies of the GLX bits, one in the server
and one in libglx.so causing problems, I didn't understand why the
X server needed a copy so drop it, however then we have to fix a missing
GlxExtensionInit that comes from sdksyms, so work around it by moving
that one declaration into a header that sdksyms doesn't scan.
Thanks to Jon Turney for debugging the actual problem.
(copyright header from extinit.h that seems most appropriate put on top).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52402
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard
Peter Hutterer
Dave Airlie
Dave Airlie
Yaakov Selkowitz
Chris Wilson
Thierry Reding
Daniel Stone
Adam Jackson
Jon TURNEY
Stephan Schreiber
Jason Gerecke
Daniel Martin
Aaron Plattner
Alan Coopersmith
Rui Matos