We want to notice that it's set, but still pass it through to dix.
Return 0 to indicate this.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
A new --with-fallback-input-driver=foo option allows selecting a
fallback driver for the server if the driver configured for the device
is not found. Note that this only applies when the device has a driver
assigned and that module fails to load, devices without a driver are
ignored as usual.
This avoids the situation where a configuration assigns e.g. the
synaptics driver but that driver is not available on the system,
resulting in a dead device. A fallback driver can at least provides some
functionality.
This becomes more important as we move towards making other driver true
leaf nodes that can be installed/uninstalled as requested. Specifically,
wacom and synaptics, a config that assigns either driver should be
viable even when the driver itself is not (yet) installed on the system.
It is up to the distributions to make sure that the fallback driver is
always installed. The fallback driver can be disabled with
--without-fallback-input-driver and is disabled by default on non-Linux
systems because we don't have generic drivers on those platforms.
Default driver on Linux is libinput, evdev is the only other serious
candidate here.
Sample log output:
[ 3274.421] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 3274.421] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad weird driver"
[ 3274.421] (II) LoadModule: "banana"
[ 3274.422] (WW) Warning, couldn't open module banana
[ 3274.422] (II) UnloadModule: "banana"
[ 3274.422] (II) Unloading banana
[ 3274.422] (EE) Failed to load module "banana" (module does not exist, 0)
[ 3274.422] (EE) No input driver matching `banana'
[ 3274.422] (II) Falling back to input driver `libinput'
.. server proceeds to assign libinput, init the device, world peace and rainbows
everywhere, truly what a sight. Shame about the banana though.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not visible in the patch, but the same stanza is repeated below inside
the #ifdef GLXEXT. There's no reason to bother with checking it if we
built without GLXEXT so remove the unconditional one.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
As the man page for the latter states:
The effects of signal() in a multithreaded process are unspecified.
We already have an interface to call sigaction() instead, use it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Threaded input doesn't use SIGIO anymore, but existing drivers using
xf86BlockSIGIO and xf86ReleaseSIGIO probably want to lock the input
mutex during those operations. Provide inline functions to do this
which are marked as 'deprecated' so that drivers will get warnings
until they are changed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Oops. This didn't get removed when xfree86 was converted over to use
the input thread.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
threaded input can affect drivers that use OsBlockSIGIO when dealing
with cursors.
Signed-off-by: Keith Packard <keithp@keithp.com>
Requested-by: Peter Hutterer <peter.hutterer@who-t.net>
Switch the XFree86 DDX over to threaded input
v2: Rewrite comment in xf86Helper about silken mouse
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When this code was called from SIGIO, saving and restoring errno could
possibly have made sense in some strange environment. Now that this
will not be called from a signal handler, there is no reason to do that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Not all display managers make it easy (or possible) to modify the
command line flags passed to the server, so add a way to get to it from
xorg.conf.
v2: Fix the FlagOptions list to not have IGLX after the terminator (Alan
Coopersmith)
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The destination variable is never freed, thus we even plug some memory
leaks.
v2: Rebase against updated xf86CheckPrivs() helper.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Current message was quite off "file specified must be a relative path"
and alike. Just factor it out and use "path/file" as needed.
v2: Rework error message, drop "Using default", print actual arg value.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The tablet pads have been separate kernel devices for a while now and
libwacom has labelled them with the udev ID_INPUT_TABLET_PAD for over a year
now. Add a new MatchIsTabletPad directive to apply configuration options
specifically to the Pad part of a tablet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
-Wlogical-op now tells us:
devices.c:1685:23: warning: logical ‘and’ of equal expressions
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
All consumers have been ported to the root window callback, so this can
all be nuked.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There are no longer any loadable font modules (not that they ever did
much in the first place), so stop pretending they're a defined ABI
surface.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Was removed from the tree in:
commit f175cf45ae
Author: Olivier Fourdan <ofourdan@redhat.com>
Date: Wed Feb 10 09:34:34 2016 +0100
vidmode: move to a separate library of its own
but not removed from the Makefile, which broke 'make dist'.
Signed-off-by: Adam Jackson <ajax@redhat.com>
This patch introduces a new flag ATTR_KEY for hotplugged input devices,
so we can better distinguish between real keyboards (i.e. devices with
udev property ID_INPUT_KEYBOARD="1") and other key input devices like
lid switches, power buttons, etc.
All supported hotplug backends (udev, hal, and wscons) will set both
flags ATTR_KEY and ATTR_KEYBOARD for real keyboards, but udev backend
will set ATTR_KEY, but not ATTR_KEYBOARD, for non-keyboard key input
devices (hal and wscons will set both flags in any case). With this
distinction, kdrive input hotplugging mechanism will be allowed to only
grab real keyboards, as other key input devices are currently not
supported.
In order to don't break current behaviour, this patch will replace all
ATTR_KEYBOARD occurrences with ATTR_KEY in hw/xfree86/common/xf86Xinput.c.
[ajax: Just add ATTR_KEY, don't re-number the other attributes]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
The API signature of the DIX xf86VidModeGetGammaRampSize() is now
identical to the xf86cmap's xf86GetGammaRampSize() and all it does is
actually call xf86GetGammaRampSize() so we can save one vfunc.
Remove uneeded xf86VidModeGetGammaRampSize() function.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The DIX already checks for VidModePrivateKey to get the vfunc, so
checking for this again in the DDX is redundant.
Remove the redundant function xf86VidModeAvailable() from the DDX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
XVidMode extension might be useful to non hardware servers as well (e.g.
Xwayand) so that applications that rely on it (e.g. lot of older games)
can at least have read access to XVidMode.
But the implementation is very XFree86 centric, so the idea is to add
a bunch of vfunc that other non-XFree86 servers can hook up into to
provide a similar functionality.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87806
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
To avoid confusion as to what belongs on the DDX and what not.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
To be able to reuse the VidMode extension in a non-hardware server, the
display mode definitions need to be accessible from DIX.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The mode access functions (namely VidModeCreateMode(),
VidModeCopyMode(), VidModeGetModeValue() and VidModeSetModeValue()) are
used only in xf86VidMode code and do not need to be available anywhere
else.
Remove these functions from the public VidMode API and move them as
static where they are used.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The API uses an untyped pointer (void *) where a DisplayModePtr is
expected.
Clean up the API to use the appropriate type, as DisplayModePtr is
really all that will be passed there.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
VidModeGetMonitor() is used solely in ProcXF86VidModeGetMonitor() to
get a untyped monitor pointer that is passed back straight again to
VidModeGetMonitorValue().
This is actually useless as VidModeGetMonitorValue() could as well get
the monitor from the ScreenPtr just like VidModeGetMonitor() does.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
New code passes ScreenPtr instead of the screen index.
Change the VidMode functions to take a ScreenPtr.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
As we rely on dixRegisterPrivateKey() to allocate the memory for us that
will be free automatically, we do not need the CloseScreen wrapper
anymore.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
dixRegisterPrivateKey() can allocate memory that will be freed when the
screen is teared down.
No need to calloc() and free the memory ourself using a broken ref
counting method.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This applies regardless of which DRI you're asking for. Worse, leaving
it out means breaking the config file syntax in a pointless way, since
non-DRI servers can safely just parse it and ignore it.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
No real change, but if the driver is broken and doesn't provide a PreInit
function, then we don't need to worry about logind.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
InputClass sections use various MatchFoo directives to decide which device to
apply to. This usually works fine for specific snippets but has drawbacks for
snippets that apply more generally to a multitude of devices.
This patch adds a NoMatchFoo directive to negate a match, thus allowing
snippets that only apply if a given condition is not set. Specifically, this
allows for more flexible fallback driver matching, it is now possible to use a
snippet that says "assign driver foo, but only if driver bar wasn't already
assigned to it". For example:
Section "InputClass"
Identifier "libinput for tablets"
MatchIsTablet "true"
NoMatchDriver "wacom"
Driver "libinput"
EndSection
The above only assigns libinput to tablet devices if wacom isn't already
assigned to this device, making it possible to select a specific driver by
installing/uninstalling it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Remove code in xf86Wakeup for dealing with device and other input and
switch to using the new NotifyFd interface.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Globally replace #ifdef and #if defined usage of 'sun' with '__sun'
such that strict ISO compiler modes such as -ansi or -std=c99 can be used.
Signed-off-by: Richard PALO <richard@NetBSD.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
As the code says, this is "far from complete". So far, in fact, that
it's been basically untouched for twenty years (XFree86 3.1!). As far
as I can tell it was never enabled in any XFree86 build, and certainly
has never been enabled since Xorg 7.0.
Also, K&R.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This matches the GCCUSESGAS path from the old monolith build (where that
macro was actually set), and fixes the build on modern OSX.
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
At startup the server wasn't adding devices, but nothing
was blocking hotplug devices by the look of it.
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91388
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
xserver/hw/xfree86/common/xf86Helper.c:1834:12: error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘Atom’ [-Werror=format=]
xserver/hw/xfree86/common/xf86Helper.c:1834:12: error: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘Atom’ [-Werror=format=]
Atom is unfortunately unsigned long or unsigned int depending on the
architecture, so a cast is required.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The only drivers I can find that used this are the r128 and radeon DRI
drivers. r128 is dead and the radeon driver wasn't including Xorg's
compiler.h and still worked.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Adam Jackson
Peter Hutterer
Keith Packard
Emil Velikov
Laércio de Sousa
Olivier Fourdan
Daniel Stone
agoins
Richard PALO
Dave Airlie
Jon TURNEY
Matt Turner