This patch (and not setting HARDWARE_CURSOR_BIT_ORDER_MSBFIRST on big endian
platforms) fixes it for me with the radeon driver and doesn't break intel.
Correct patch this time :)
Should have done this in the first place. Since we're checking for the absence
of the get_crtc callback in the first place, we'll short circuit the later call
and disable the output, so the ugly "continue" block is unnecesary.
By adding a new output callback, ->get_crtc, xf86SetDesiredModes is able to
avoid turning off outputs & CRTCs if the current output<->CRTC mappings are the
same as the desired configuration. This helps avoid flickering displays at
startup time, which speeds things up a little and looks better.
Unless we check for vtSema before calling into the CRTC and output callbacks,
we may end up trying to access video memory that no longer exists, leading to a
crash. So if we don't have vtSema, return FALSE to the caller, indicating that
we didn't do anything.
Fixes#14444.
Actually more like in the mainline case, where the ideal mode happens to
be the very first aspect match on the first monitor. But let's not
split hairs.
The address written to 0xcf8 contains the PCI slot address to send the
config cycle to. However, we would ignore that and always send the
cycle to the device whose BIOS we were running. This breaks some
integrated graphics platforms that have explicit knowledge about the
system's host bridge, for example.
While the ScreenRec's notion of size in millimeters would get updates,
the RANDR 1.1 notion wouldn't, so your screen would appear to be square
and probably at some ludicrous DPI.
xserver and libpciaccess both need to open /dev/xf86, which can only
be opened once. I implemented pci_system_init_dev_mem() like Ian
suggested. This requires some minor changes to the BSD-specific
os-support code. Since pci_system_init_dev_mem() is a no-op on
FreeBSD this should be no problem.
i.e., don't check for the end of the list by ->name == NULL, since that
won't work now. Fix the consumers of xf86DefaultModes to use the new
explicit size as well.
In order to report accurate values to users of the RandR property interface,
it's sometimes necessary to ask the driver to update the value (for example
when backlight brightness changes without the server's knowledge, due to hotkey
events or direct sysfs banging).
This patch wires up the core server code with a new xf86CrtcFuncs callback,
get_property, to allow for this.
The new code is available under the RANDR_13_INTERFACE define, which in turn
depends on the RANDR_12_INTERFACE code.
Old heuristic was to find the first monitor that expressed a preference,
then attempt to get all other monitors to agree. This doesn't work
particularly well when the two sets of modes don't precisely intersect,
you get overlapping-but-not-identical output geometry and things go wrong.
New heuristic is:
- Exact user preference, if given
- Exact output preference, if the same for all outputs
- Best (largest) mode of modes common to all outputs:
- with the same aspect ratio as all outputs (may be NULL)
- with 4:3 aspect ratio
- Then the old heuristic to try to get something lit
Note that it is simply not doable to have a reliable initial output guess if
you insist on trying to clone all outputs together. It's far too easy to
end up with displays that simply don't have modes in common. We need to
switch to right-of placement someday, once we're not limited to CRTC size
limits and we have working multi-GPU in RANDR.
If you don't do this, then Modes "800x600" in the Display subsection will
be dutifully ignored and the driver will start at whatever resolution it
feels like.
CVT is enough different from GTF that it should not be used on monitors
that aren't expecting it. This brings us closer to what the spec says
the correct behaviour is.
Before this it was meaningless to try to mark DisplayModeRec tables
const, since the mode name would be emitted as a pointer to an
anonymous string constant, and therefore would have to be fixed up by
ld.so and so couldn't live in .rodata. With this change the standard
mode lists can live in .rodata, and modes duplicated from them will
have their names filled in on the fly.
FindPCIVideoInfo() function isn't need anymore.
xf86scanpci() is being called only once so we don't need permanent
(static) variables there.
restorePciState() is not used for now (until we find why multiple
cards aren't working).
Formerly the code claimed it could only handle up to 256 visuals, which
was true. Also true, but not explicitly stated, was that it could only
handle visuals with VID < 256. If you have enough screens, and subsystems
that add lots of visuals, you can easily run off the end. (Made worse
because we allocate visual IDs from the same pool as XIDs.) If your app
then chooses a visual > 256, then the Xinerama code would throw BadMatch
on CreateColormap and your app wouldn't start.
With this change, PanoramiXVisualTable is gone. Other subsystems that
were using it as a translation table between each screen's visuals now
use a PanoramiXTranslateVisual() helper.
When an expose event happens on an host GL window paired with an
internal drawable, route that expose event to the clients listening
to the expose event on the internal drawable.
This reverts commit 3abce3ea2b and
6cbaf15e61.
The memory returned to xf86LoadModule was allocated in doLoadModule, which
calls the respective module's PreInit. As it turns out, input and output
drivers store a pointer to the module elswhere, so freeing it in
xf86LoadModule is a bad idea.
For further reference: hw/xfree86/common/xf86Helper.c
Input drivers: xf86InputDriverList[blah]->module = module;
Output drivers: xf86DriverList[blah]->module = module;
Unloading the module would not look pretty then.
LoadModule() returns the only reference to a fresh piece of memory (a
ModuleDescPtr). Sadly, xf86LoadModules dropped the return value on the floor
leaking memory for each module it loaded.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
All the failure paths were very diligent in freeing the "fullpath" temporary
string, but the success case was not. All the content only got strdup()d, so
it's not live memory anymore.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
xf86LogInit allocates a piece of memory, stores it in lf. LogInit() will then
effectively strdup it, but lf is never freed again.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
We need to start breaking the XKB API to enforce sanity, so drag whichever
headers we need to do so into the server tree, as the client API is set in
stone, being part of Xlib.
Now resizing it won't produce weir overlaps of the widgets. Thanks to
Pelle Johansson for his help showing me how to do this.
(cherry picked from commit ef3498e92d13c82633fdbe8120396bfbe1e7489a)
After trying to switch from X to VT (or just quit) the video-amd driver
attempts to issue INT 10/0 to go to mode 3 (VGA). The emulator, running
the BIOS code, would then spit out:
c000:0282: A2 ILLEGAL EXTENDED X86 OPCODE!
The opcode was 0F A2, or CPUID; it was not implemented in the emulator.
This simple patch, against 1.3.0.0, handles the CPUID instruction in one of
two ways:
1) if ran on __i386__ or __x86_64__ then it calls the CPUID instruction
directly.
2) if ran elsewhere it returns a canned 486dx4 set of values for
function 1.
This fix allows the video-amd driver to switch back to console mode,
with the GSW BIOS.
Thanks to Symbio Technologies for funding my work, and ThinCan for
providing hardware :)
Signed-off-by: Bart Trojanowski <bart@jukie.net>
Acked-by: Eric Anholt <eric@anholt.net>
'Loading foo' is verbosity 3, whereas 'already built-in' is verbosity 0.
This means that gdm's log would just be full of bare 'module already
built-in' messages.
Also fixed DarwinEQEnqueue to match changes to the callback
And also use dpmsstubs.c rather than copying the code into darwin.c
(cherry picked from commit 4c5c30a4beb7a427b00b18097f548876ad3c11d7)
xf86CrtcRotate() is called by randr 1.2 drivers via xf86CrtcSetMode() or xf86SetDesiredModes()
during ScreenInit() at which point pScrn->pScreen is not set. If a user specifies a rotation
in their config file pScrn->pScreen is dereferenced and boom.
8 bit color still doesn't work, but the -depth command line argument now works properly.
(cherry picked from commit 6765949c27c053d22882f54337cfd09203aa5383)
RISC chips that trap on unaligned loads and stores need to
define __GLX_ALIGN64. This used to get added to the cflags
in the old *.cf files but it no longer does in the modular
X server.
Also, Alpha needs to pass -mieee to the compiler as well.
This is a simple backport of a patch that debian, and probably other
distributions, have been applying forever. To the best of my
knowledge the patch was written by Jurij Smakov. See Debian bug
number #388125.
I just checked and this has been rotting for more than a year in
freedesktop bugzilla as #8392.
Signed-off-by: David S. Miller <davem@davemloft.net>
First mode is _always_ preferred in 1.4; the bit that used to mean this
now means that the preferred mode is also the native pixel format. The
old "is GTF" bit now means "is continuous-frequency" instead.
Section 3.6.4, Table 3.14: Feature Support, Notes 4 and 5.
Jeremy Huddleston
Michel Dänzer
Alex Deucher
Dodji Seketeli
Jesse Barnes
Matthieu Herrb
Donnie Berkholz
Adam Jackson
Bart Trojanowski
Doug Chapman
Mark Kettenis
Matthias Hopf
Kristian Høgsberg
Kristian Høgsberg
Julien Cristau
Aaron Plattner
James Cloos
David Nusinow
George Sapountzis
Maarten Maathuis
Eamon Walsh
Tiago Vignatti
Dave Airlie
Dodji Seketeli
Peter Hutterer
Arjan van de Ven
Daniel Stone
Jeremy Huddleston
Jeremy Huddleston
Bart Trojanowski
liuhong
Coleman Kane
Julien Goodwin
Hong Liu
Matthieu Herrb
Dave Airlie
Peter Harris
Alan Coopersmith
Richard Purdie
Alex Deucher
Jurij Smakov