Currently, when given the choice, Xwayland will pick the GBM backend
over the EGLstream backend if both are available, unless the command
line option “-eglstream” is specified.
The NVIDIA proprietary driver had no support for GBM until driver series
495, but starting with the driver series 495, both can be used.
But there are other requirements with the rest of the stack, typically
Mesa, egl-wayland, libglvnd as documented in the NVIDIA driver.
So if the NVIDIA driver series 495 gets installed, Xwayland will pick
the GBM backend even if EGLstream is available and may fail to render
properly.
To avoid that issue, prefer EGLstream if EGLstream and all the Wayland
interfaces are available, and fallback to GBM automatically unless
“-eglstream” was specified.
With this, the compositor, given the choice, can decide which actual
backend Xwayland would use by advertising (or not) the Wayland
"wl_eglstream_controller" interface.
This change has no impact on compositors which do not have support for
EGLstream in the first place.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Add (verbose) statements to trace the actual backend used with glamor.
That can be useful for debugging.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
On a normal startup sequence, the Xwayland glamor backend would log
an error whenever a required Wayland protocol is missing.
Those are not really errors though, more informational messages along
the glamor backend selection process.
Demote those errors to verbose messages to reduce the verbosity of
Xwayland at startup by default.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
If no EGLstream capable device is found at startup, Xwayland's EGLstream
backend will log an error message "glamor: No eglstream capable devices
found".
However, considering that the vast majority of drivers do not implement
EGLstream, the lack of EGLstream capable device is more of the norm than
the exception.
Change the error message to a log verbose message.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
We were storing the pointer to struct glamor_context. However, glamor
itself is storing the EGLContext pointer since the commit below. Since
the two values could never be equal, this resulted in constant
superfluous eglMakeCurrent calls. The implicit glFlush triggered by
those couldn't be good for performance.
Fixes: 7c88977d33 "glamor: Store the actual EGL/GLX context pointer in lastGLContext"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
The code to clear a cursor pending frame callback was duplicated in
multiple places in the code.
Introduce a new xwl_cursor_clear_frame_cb() function and remove the
duplicated code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
It just make more sense to keep xwl_cursor_release() with the rest of
the cursor code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Two different functions in xwayland-cursor.c and xwayland-input.c use
the same name xwl_seat_update_cursor() which is confusing when reading
the code.
Rename xwl_seat_update_cursor() to xwl_seat_update_all_cursors() in
xwayland-cursor.c to help with readability of the code.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Passing -noTouchPointerEmulation results in an error about the
flag not being recognized.
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 7d34b1f2b7 ("xwayland: add -noTouchPointerEmulation")
If the tablet tool is moved out of proximity before the cursor's pending
frame callback is received, any further attempts to update the cursor
will fail because the frame callback is still pending.
Make sure to clear any cursor pending frame when the tool gets in
proximity again, similar to what we do when the pointer re-enters a
surface, so that the cursor updates aren't discarded.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
See-also: https://gitlab.gnome.org/GNOME/mutter/-/issues/1969
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Some clients (typically Java, but maybe others) rely on ConfigureNotify
or RRScreenChangeNotify events to tell that the XRandR request is
successful.
When emulated XRandR is used in Xwayland, compute the emulated root size
and send the expected ConfigureNotify and RRScreenChangeNotify events
with the emulated size of the root window to the asking X11 client.
Note that the root window size does not actually change, as XRandR
emulation is achieved by scaling the client window using viewports in
Wayland, so this event is sort of misleading.
Also, because Xwayland is using viewports, emulating XRandR does not
reconfigure the outputs location, meaning that the actual size of the
root window which encompasses all the outputs together may not change
in a multi-monitor setup. To work around this limitation, when using an
emulated mode, we report the size of that emulated mode alone as the
root size for the configure notify event.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
With the GBM backend becoming usable with different drivers such as
NVIDIA, set the GLVND vendor to the same value as the GBM backend name.
Mesa implementation however returns "drm" so we need to special case
this value - Basically, for anything other than "drm" we simply assume
that the GBM backend name is the same as the vendor.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
Tested-by: James Jones <jajones@nvidia.com>
Xwayland was passing GBM bos directly to
eglCreateImageKHR using the EGL_NATIVE_PIXMAP_KHR
target. Given the EGL GBM platform spec claims it
is invalid to create a EGLSurface from a native
pixmap on the GBM platform, implying there is no
mapping between GBM objects and EGL's concept of
native pixmaps, this seems a bit questionable.
This change modifies the bo import function to
extract all the required data from the bo and then
imports it as a dma-buf instead when the dma-buf +
modifiers path is available.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Xwayland's xwl_shm_create_pixmap() computes the size of the shared
memory pool to create using a size_t, yet the Wayland protocol uses an
integer for that size.
If the pool size becomes larger than INT32_MAX, we end up asking Wayland
to create a shared memory pool of negative size which in turn will raise
a protocol error which terminates the Wayland connection, and therefore
Xwayland.
Avoid that issue early by return a NULL pixmap in that case, which will
trigger a BadAlloc error, but leave Xwayland alive.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
We turn this on if the GL underneath us can enable GL_FRAMEBUFFER_SRGB.
We do try to generate both capable and incapable configs, which is to
keep llvmpipe working until the client side gets smarter about its srgb
capabilities.
xwl_present_reset_timer checks if the pending flip is synchronous, so
we need to call it after adding the pending flip to the flip queue.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1219
Fixes: b2a06e0700 "xwayland/present: Drop sync_flip member of struct xwl_present_window"
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This is not actually a change for xwayland with gbm, or for xfree86 with
big-GL, but we do change them as well to use EGL_NO_CONFIG_KHR
explicitly.
Reviewed-by: Emma Anholt <emma@anholt.net>
Due to a typo in tablet_pad_group(), we would allocate a variable
("group") and test another one ("pad") for allocation success.
Spotted by covscan.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: commit 8475e63 - "xwayland: add tablet pad support"
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
On screen init, if any of the private type registration fails we would
return FALSE without actually freeing the xwl_screen we just allocated.
This is not a serious leak as failure at that point would lead to the
premature termination of Xwayland at startup, but covscan complains and
it's easy enough to fix.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
In some scenarios, the Wayland compositor might have more knowledge
than the X11 server and may be able to perform pointer emulation for
touch events better. Add a command-line switch to allow compositors
to turn Xwayland pointer emulation off.
Signed-off-by: Simon Ser <contact@emersion.fr>
Xwayland is using a copy of the CVT generator found in Xorg.
Rather than duplicating the code within the xserver tree, use the
libxcvt implementation instead.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We are handling two cases here: the active flip or the pending flip.
For the pending flip (event->pending == TRUE), we called
xwl_present_release_pixmap.
For the active flip (event->pending == FALSE), we called
xwl_present_release_event. However, xwl_present_flip_notify_vblank
already unhooked event->vblank.event_queue. So this was effectively the
same as calling xwl_present_release_pixmap.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Use present_vblank_rec::event_queue instead.
The changes in xwl_present_execute shouldn't really be needed, since
we should never hit queue_vblank in present_execute_wait. But let's be
safe rather than sorry, plus this simplifies the code.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Can just call xwl_present_execute directly.
This allows dropping the window member from struct xwl_present_window as
well.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
We clear the vblank->pixmap field, so next time xwl_present_execute
falls through to present_execute_post.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This allows for various simplifications.
Use the pointer to the struct memory as the event ID. In contrast to
the SCMD code for Xorg (where pending DRM events cannot be cancelled),
this is safe here, because we can destroy pending Wayland callbacks. So
we can't get a callback with a stale pointer to freed memory.
Remove xwl_present_window::release_list in favour of
present_vblank_rec::window_list.
Remove xwl_present_event::xwl_present_window in favour of
present_vblank_rec::window.
xwl_present_free_event is never called for a NULL pointer anymore, no
need to check.
v2:
* Restore DestroyWindow wrapping order to make sure
present_destroy_window doesn't call xwl_present_abort_vblank.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
We can call xwl_present_free_event unconditionally from
xwl_present_abort_vblank, since the sync_callback is already destroyed
in xwl_present_cleanup.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Mainly into xwl_present_check_flip, and call that from
present_wnmd_check_flip_window.
No need for them to be separate anymore.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This will allow eliminating indirections and making the Xwayland Present
code more efficient and easier to follow.
While this technically changes the Xorg video driver ABI, I don't know
of any drivers using the dropped present_wnmd_* symbols, and I doubt a
Xorg driver could make use of them as is anyway.
(As a bonus, Xorg no longer links any Xwayland specific Present code)
v2:
* Wrap DestroyWindow before initializing Present, so that
present_destroy_window runs before xwl_present_cleanup. Avoids crash
due to present_destroy_window calling xwl_present_* functions when
xwl_present_window was already freed. (Olivier Fourdan)
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Not sure why we'd need to abandon a pending stream for a pixmap just
because it's no longer a window pixmap. Let's try not to.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This makes sure RandR events are sent to interested clients as needed.
This was happening implicitly in some cases, but not in others, e.g. if
the root window size didn't change.
If this were to call RRTellChanged more often than necessary in some
cases, that should be harmless, as it only sends events if something
has actually changed since last time.
Should fix https://bugzilla.redhat.com/show_bug.cgi?id=1979892 .
v2:
* Call RRTellChanged at the very end of update_screen_size, just in
case.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
To avoid an EGL stream in the wrong state, if the window pixmap changed
before the stream was connected, we would still keep the pending stream
but mark it as invalid. Once the callback is received, the pending would
be simply discarded.
But all of this is actually to avoid a bug in egl-wayland, there should
not be any problem with Xwayland destroying an EGL stream while the
compositor is still using it.
With that bug now fixed in egl-wayland 1.1.7, we can safely drop all
that logic from Xwayland EGLstream backend.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1189
If the pixmap does not actually change in set_window_pixmap(), there is
no need to invalidate the pending stream, if there's one.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
In xwl_glamor_eglstream_get_wl_buffer_for_pixmap. This can likely be hit
now with an SHM pixmap via the Present flip path. There might be other
corner cases.
Fixes: f3eb1684fa "xwayland: enable MIT-SHM shared pixmaps"
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When the command line option "-terminate" is used, it could be
interesting to give it an optional grace period to let the Xserver
running for a little longer in case a new connection occurs.
This adds an optional parameter to the "-terminate" command line option
for this purpose.
v2: Use a delay in seconds instead of milliseconds
(Martin Peres <martin.peres@mupuf.org>)
v3: Clarify man page entry, ensure terminateDelay is always >= 0,
simplify TimerFree(). (Peter Hutterer <peter.hutterer@who-t.net>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
That will dramatically affect performance, might as well log when we
cannot use GL_OES_EGL_image with the NVIDIA closed-source driver.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
If the EGLStream backend is able to use hardware acceleration with the
NVIDIA closed source driver, we should use the "nvidia" GLX
implementation instead of the one from Mesa to take advantage of the
NVIDIA hardware accelerated rendering.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
If Xwayland's EGLstream backend supports hardware acceleration with the
NVIDIA closed-source driver, the GLX library also needs to be one
shipped by NVIDIA, that's what GLVND is for.
Add a new member to the xwl_screen that the backend can optionally set
to the preferred GLVND vendor to use.
If not set, "mesa" is assumed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When eglSwapBuffers inserts a new frame into a window's stream, there may be a
delay before the state of the consumer end of the stream is updated to reflect
this. If the subsequent wl_surface_attach, wl_surface_damage, wl_surface_commit
calls are received by the compositor before then, it will (typically) re-use
the previous frame acquired from the stream instead of the latest one.
This can leave the window displaying out-of-date contents, which might never be
updated thereafter.
To fix this, after calling eglSwapBuffers, xwl_glamor_eglstream_post_damage
should call eglStreamFlushNV. This call will block until it can be guaranteed
that the state of the consumer end of the stream has been updated to reflect
that a new frame is available.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1171
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Allow X11 clients to create shared pixmaps via the MIT-SHM
extension under Xwayland. Tested with a wlroots patch [1].
Also add a few assertions to make sure we have wl_buffers where we
need them.
[1]: https://github.com/swaywm/wlroots/pull/2875
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
As of commit 098e0f52 xwl_glamor_eglstream_allow_commits will not allow commits
if the xwl_pixmap does not have an EGLSurface. This is valid for pixmaps backed
by an EGLStream, however pixmaps backed by a dma-buf for OpenGL or Vulkan
rendering will never have an EGLSurface. Unlike EGLStream backed pixmaps,
though, glamor will render directly to the buffer that Xwayland passes to the
compositor. Hence, they don't require the intermediate copy in
xwl_glamor_eglstream_post_damage that EGLStream backed pixmaps do, so there is
no need for an EGLSurface.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The EGLstream backend's post damage function uses a shader and
glDrawArrays() to copy the data from the glamor's pixmap texture prior
to do the eglSwapBuffers().
However, glDrawArrays() can be affected by the GL state, and therefore
not reliably produce the expected copy, causing the content of the
buffer to be corrupted.
Make sure to set the ALU to GXCopy prior to call glDrawArrays() to get
the expected result.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, the EGLstream backend would increment the pixmap refcount for
each commit, and decrease that refcount on the wl_buffer release
callback.
But that's relying on the compositor sending us a release callback for
each commit, otherwise the pixmap refcount will keep increasing and the
pixmap will be leaked.
So instead, increment the refcount on the pixmap only when we have not
received a release notification for the wl_buffer, to avoid increasing
the pixmap refcount more than once without a corresponding release
event.
This way, if the pixmap is still in use when released on the X11 side,
the EGL stream will be kept until the compositor releases it.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
EGLstream's post_damage() would unconditionally return success
regardless of the actual status of the eglSwapBuffers().
Yet, if eglSwapBuffers() fails, we should not post the corresponding
damage as they wouldn't match the actual content of the buffer.
Use the eglSwapBuffers() return value as the return value for
post_damage() and do not take a refrence on the pixmap if it fails.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Use calloc() instead of malloc() like the rest of the code.
Also fix the arguments of calloc() calls to match the definition which
is calloc(size_t nmemb, size_t size).
This is a cleanup patch, no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The EGL surface for the xwl_pixmap is created once the stream is ready
and valid.
If the pixmap's EGL surface fails, for whatever reason, the xwl_pixmap
will be unusable and will end up as an invalid wl_buffer.
Make sure we do not allow commits in that case and recreate the
xwl_pixmap/stream.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
Now that the pending stream is associated with the xwl_pixmap for
EGLStream and the xwl_pixmap itself is associated to the pixmap, we have
a reliable way to get to those data from any pending stream.
As a result, the list of pending streams that we keep in the EGLStream
global structure becomes useless.
So we can drop the pending stream's xwl_pixmap and also the list of
pending streams altogether, and save us a walk though that list for each
callback.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit affc47452 - "xwayland: Drop the separate refcount for the
xwl_pixmap" removed the separate reference counter for the xwl_pixmap
which holds the EGLStream.
While that works fine for the common case, if the window's pixmap is
changed before the stream is ready, the older pixmap will be destroyed
and the xwl_pixmap along with it, even if the compositor is still using
the stream.
The code that was removed with commit affc47452 was taking care of that
by increasing the separate reference counter for the xwl_pixmap, but it
no longer the case.
As a result, we may end up with the EGL stream in the wrong state when
trying to use it, which will cascade down into all sort of issues.
To avoid the problem, increase the reference count on the pixmap when it
is marked as invalid in EGLStream's SetWindowPixmap().
This way, the xwl_pixmap and the EGLStream are kept until released by
the compositor, even when the pixmap changes before stream is ready.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Fixes: affc47452 xwayland: Drop the separate refcount for the xwl_pixmap
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
Previously, we would have pending streams associated with top level X11
windows, keeping temporary accounting for the pending streams before
they get fully initialized for the xwl_pixmap which would be associated
with X11 pixmaps.
If the window content changes before the stream is ready, the
corresponding pending stream would be marked as invalid and the pending
stream would be eventually removed once the stream becomes ready.
Since commit affc47452 - "xwayland: Drop the separate refcount for the
xwl_pixmap", we no longer keep a separate reference counter for the
xwl_pixmap, but rather tie it to the X11 pixmap lifespan. Yet, the
pending stream would still be associated with the X11 toplevel window.
Dissociate the pending streams from the X11 toplevel window, to keep it
tied only to the xwl_pixmap so that we can have:
- pixmap <-> xwl_pixmap
- xwl_pixmap <-> pending stream
Of course, the pending streams remain temporary and get removed as soon
as the ready callback is triggered, but the pending streams are not
linked to the X11 window anymore which can change their content, and
therefore their X11 pixmap at any time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
eglCreateStreamKHR() can fail and return EGL_NO_STREAM_KHR, in which
case there is no point in trying to create a buffer from it.
Similarly, eglCreateStreamProducerSurfaceKHR() also fail and return
EGL_NO_SURFACE, which in turn will be used in eglMakeCurrent() as
draw/read surface, and therefore would mean no draw/read buffer.
In those cases, log the error, and bail out early. That won't solve the
issue but will help with investigating the root cause of issues with
EGLStream backend.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
Some functions are called "callback" whereas they are not longer
callback functions or "unref" while they no longer deal with a reference
counter anymore, which is quite confusing. Rename those functions to be
more explicit.
Also, the pending streams can be destroyed in different places, move the
common code to separate function to avoid duplicating code and help with
readability of the code.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
The EGLStream backend would sometime generate GL errors trying to draw
to the framebuffer, which gives an invalid buffer, which in turn would
generate a Wayland error from the compositor which is fatal to the
client.
Check the framebuffer status and bail out early if it's not complete,
to avoid getting into trouble later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
If the glamor backend failed to post damage, the caller should do the
same to avoid a failure to attach the buffer to the Wayland surface.
Change the API of Xwayland's glamor backend post_damage() to return a
status so that xwl_window_post_damage() can tell whether the callee
failed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
If the buffer is NULL, do not even try to attach it, and risk a Wayland
protocol error which would be fatal to us.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
EGLStream wl_eglstream_display_create_stream() may fail, yet Xwayland
would try to attach the buffer which may cause a fatal Wayland protocol
error raised by the compositor.
Check if the buffer creation worked, and fail gracefully otherwise (like
wayland-eglsurface does).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/-/issues/1156
If a window is being used for direct rendering with OpenGL or Vulkan, and is
using the flipping path for presentation, it's pixmap will be set to a dma-buf
backed pixmap created by the client-side GL driver. However, this means that
xwl_glamor_eglstream_post_damage won't work since it requires that the pixmap
has an EGLSurface that it can render to, which dma-buf backed pixmaps do not.
In this case, though, xwl_glamor_eglstream_post_damage is not necessary since
glamor will have rendered directly to the pixmap, so we can simply pass it
directly to the compositor. There's no need for the intermediate copy we
normally do in that function.
Therefore, this change adds an early-return case to post_damage for dma-buf
backed pixmaps, and removes the corresponding asserts from that function and
allow_commits.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Provides an implementation for the pixmap_from_buffers DRI3 function for
xwayland's eglstream backend. This will be used by the NVIDIA GLX driver
to pass buffers from client applications to the server. These can then
be presented using the PRESENT extension.
To hopefully make this less error-prone, we also introduce a "type"
field for this struct to distinguish between xwl_pixmaps for the new
DRI3-created pixmaps and those for the existing glamor-created pixmaps.
Additionally, the patch enables wnmd present mode with the eglstream backend.
This involves creating a wl_buffer for the provided dma-buf before importing it
into EGL and passing this to the compositor so it can be scanned out directly
if possible.
Since both backends now support this present mode, the HAS_PRESENT_FLIP flag is
no longer needed, so it can be removed.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
This is preliminary work for hardware accelerated rendering with the
NVIDIA driver.
This exposes a new glamor backend function, check_flip, which can be
used to control whether flipping is supported for the given pixmap.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
This is preliminary work for hardware accelerated rendering with the
NVIDIA driver.
This moves the modifiers and formats functions previously only available
to the GBM backend to the common glamor code so that it can be used by
both the GBM and EGLStream backends.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
This is preliminary work for hardware accelerated rendering with the
NVIDIA driver.
The EGLStream backend can possibly also use the dmabuf interface, so
move the relevant code from the GBM specific source to the common bits.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This bumps the minimum Wayland version to 1.5 (released in 2014).
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
When using autoconf/automake to build Xwayland, the actual path to
Xwayland is not fully qualified and refers to the "exec_prefix".
As a result, the path provided by the generated pkg-config file is wrong
when using autoconf to build the Xserver.
Fix the xwayland.pc file to also set the variable "prefix" and
"exec_prefix" so that the path to Xwayland is fully resolved.
Add those variables to the meson build as well for good measure.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Since commit 20c78f38, we use the relative pointer for enter/leave
events.
However, sprite_check_lost_focus() which verifies whether the pointer has
left an Xwayland surface still explicitly check for the absolute
pointer.
As a result, no LeaveNotify event is emitted anymore now when the
pointer crosses from an Xwayland surface to a Wayland native one.
Make sure to check the last slave device against get_pointer_event() as
well, not just the absolute pointer.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Roman Gilg <subdiff@gmail.com>
Tested-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes: 20c78f38 - xwayland: use get_pointer_device() for enter/leave
handling too
Xwayland won't emulate XWarpPointer requests if the cursor is visible,
this is to avoid having the cursor jumping on screen and preventing
random X11 clients from controlling the pointer in Wayland, while
allowing games which use that mechanism with a hidden cursor to work in
Xwayland.
There are, however, games which tend to do it in the wrong order, i.e.
show the cursor before moving the pointer, and because Xwayland will not
allow an X11 client to move the pointer while the cursor is visible, the
requests will fail.
Add a workaround for such X11 clients, when the cursor is being shown,
keep it invisible until the cursor is actually moved. This way, X11
clients which show their cursor just before moving it would still have a
chance to succeed.
v2: Add a timeout to show the cursor for well behaved clients.
v3: Some cleanup (Michel)
v4: Do not cancel cursor delay when updating the cursor to avoid
delaying cursor visibility indefinitely if the client keeps
settings different cursors (Michel)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Jaap Buurman jaapbuurman@gmail.com
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/734
In Weston, clicking the window decoration of an Xwayland client gives us a
wl_pointer.button event immediately followed by a wl_pointer.leave event.
The leave event does not contain any button state information, so the button
remains logically down in the DIX.
Once the pointer button is released, a wl_pointer.enter event is sent with
the current button state (zero). This needs to trigger a ButtonRelease event
but for that we need to ensure that the device is the same as the one we send
ButtonPress events through.
Fixes a regression introduced in a4095162ca.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Trying to change the acceleration/threshold on Xwayland cannot work, and
the corresponding handler xwl_pointer_control() is a no-op.
Yet, an X11 client trying to change those on the touch device may
possibly cause a crash because the touch device in Xwayland doesn't set
that.
Initialize the touch device's PtrFeedback to make sure that just cannot
happen.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1137
We are using the relative pointer for motion events, but buttons and
axis events still go through the absolute pointer device.
That means additional DeviceChanged events that could be avoided if the
buttons and axis events were coming from the same device as motion
events.
Route those events to the relative pointer if available so that motion,
buttons and axis events come from the same device (most of the time).
Suggested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Related: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1130
The relative pointer only has 2 axis, if we want to route the mouse
wheel events to that device, we need to add the axis definition, similar
to what is done for the absolute pointer.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Related: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1130
This is a cleanup patch, no functional change.
Split the function dispatch_pointer_motion_event() into three separate
simpler functions, relative motion with a warp emulator, relative motion
and absolute motion.
This makes the code a lot easier to read for me, rather than having
everything in a single function with nested if/else conditions.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Xwayland supports relative motion events from the Wayland compositor via
the relative-pointer protocol, and converts those to the absolute range
in device units for raw events.
Some X11 clients however wrongly assume relative values in the axis
values even for devices explicitly labeled as absolute. While this is a
bug in the client, such applications would work fine in plain Xorg but
not with Xwayland.
To avoid that issue, use the relative values for raw events without
conversion, so that such application continue to work in Xwayland.
Thanks Peter for figuring out the root cause.
v2: Don't duplicate relative and absolute events (Peter)
v3: Use POINTER_RAWONLY (Peter)
Suggested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1130
When an X11 client issues an active grab on the keyboard, Xwayland
forward this to the Wayland compositor using the Xwayland specific
protocol "xwayland-keyboard-grab" if it can find the corresponding
Xwayland window.
Some X11 clients (typically older games) however try to issue the
keyboard grab on the X11 root window, which has obviously no matching
Xwayland window. In such a case, the grab is simply ignored and the game
will not work as expected.
To workaround that issue, if an X11 client issues a keyboard grab on the
root window, Xwayland will search for a toplevel window belonging to the
same X11 client that it can use as the grab window instead.
This way, the grab can be forwarded to the Wayland compositor that can
either grant or deny the request based on the window and its internal
policies.
The heuristic picks the first realized toplevel window belonging to the
client so that the Wayland compositor will send it the keyboard events,
and the Xserver grab mechanism will then take care of routing the events
to the expected X11 window by itself.
v2: Make the test more clear (Dor Askayo <dor.askayo@gmail.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Jonas Ådahl <jadahl@gmail.com>
See-also: https://gitlab.gnome.org/GNOME/mutter/-/issues/1249
Not all extensions can be enabled or disabled at runtime, list the
extensions which can from the help message rather than on error only.
v2:
* Print the header message in the ListStaticExtensions() (Peter
Hutterer)
* Do not export ListStaticExtensions() as Xserver API
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Olivier Fourdan
Michel Dänzer
Povilas Kanapickas
Simon Ser
James Jones
Adam Jackson
Erik Kurzinger
Peter Hutterer
Misha Gusarov