Remove some extra ref counting inside hw/xfree86/modes
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This adds new driver hooks to allocate scanout pixmaps and
changes the mode setting APIs to pass the new scanout pixmaps
along from DIX. DIX is responsible for reference counting the pixmaps
by tracking them through RRCrtcNotify.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This provides a driver hook which can either completely replace, or
just validate the parameters for, the RRSetCrtcConfigs request.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This provides a driver-independent implementation of the
RRSetCrtcConfigs API by simply using the existing interfaces.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This implements sprite position transformations. Sprite image
transforms are passed all the way to the DDX layer, but the images are
not yet manipulated before being passed to the drivers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
xf86CrtcSetModeTransform was starting to get ridiculous with 6
arguments, this change has it take a single structure that contains
all of those values along with a set of flags that says which have
changed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Initial server side implementation of fence sync
objects. Allows creation, management, and state
queries of binary state objects. Currently they
are not very useful as there is no way to wait for
them efficiently.
The basic trigger operation added here triggers
relative to a given X screen's rendering operations.
To perform this operation, fence sync objects must
be tied to a screen. As Aaron Plattner pointed out,
screens are identified but a drawable in X protocol,
so a drawable argument is included in
XSyncCreateFence(). The screen also could have been
specified as part of the trigger operation. However,
it is also desireable to associate a screen with
fence sync objects at creation time so that the
associated screen's driver can allocate any HW-
specific resources needed by the fence object up
front.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
-Add fence sync objects
-Add fence sync devPrivates
-Add a X sync module screen private
-Add wrappable functions to create and destroy
fence sync objects
-Give fence sync objects wrappable functions to
trigger, test, and reset their 'triggered' value.
-Give fence sync objects wrappable functions to
notify driver when adding/removing triggers to/
from the sync object.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Single allocation point for input devices, most notably a single point to
reset default values.
Without this patch, the file descriptor default was -1 for hotplugged
devices and 0 for config devices. Drivers that don't overwrite the default
themselves would thus fail if configured in the xorg.conf.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Options set in the configuration file were unconditionally overwritten by
the server. Merge the already existing options and the new options together
instead of just overwriting ones.
Introduced in commit 2199842ed5
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Thu Sep 2 10:52:54 2010 +1000
xfree86: remove extraOptions field from IDevRec.
X.Org Bug 32115 <http://bugs.freedesktop.org/show_bug.cgi?id=32115>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: David Ronis <ronis@ronispc.chem.mcgill.ca>
Some devices should be initialised as floating from the start (e.g.
Joysticks and accelerometers benefit from this). Currently users use the
"SendCoreEvents" "off" flag for this, which isn't the most appropriate
naming.
Add an option "Floating", deprecate the others. Still parsed and handled by
the server.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
screenInfo.numScreens is not a valid screen number, they go from 0 to
numScreens - 1.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
15ac25627e removed the "/" from the sprintf strings,
but failed to remove the extra byte allocated for the '/'.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
No point calling the no-fail-alloc if you check for failure and your
only caller checks for failure.
No point calling calloc to zero fill memory you're about to memcpy over.
In the unlikely event of a loss of memory allocation, drop your previous
allocations before returning to others.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
sun_init.c: In function `xf86OpenConsole':
sun_init.c:99: warning: cast does not match function type
sun_init.c:74: warning: unused variable `FreeVTslot'
sun_init.c: In function `xf86UseMsg':
sun_init.c:417: warning: old-style parameter declaration
sun_vid.c: In function `solUnMapVidMem':
sun_vid.c:162: warning: long unsigned int format, pointer arg (arg 6)
sun_vid.c: In function `xf86ReadBIOS':
sun_vid.c:217: warning: long unsigned int format, pointer arg (arg 5)
sun_vid.c:217: warning: long unsigned int format, int arg (arg 6)
sun_agp.c: In function `xf86EnableAGP':
sun_agp.c:321: warning: unsigned int format, CARD32 arg (arg 4)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
static function only called from the matchDriverFromFiles function
that's inside #ifdef __linux__ section
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Only one (marginal) driver was using it, and it's been fixed to just
implement it directly.
v2: Also fix sdksyms.sh (spotted by Jesse Adkins)
v3: Also fix DESIGN.xml (spotted bu Julien Cristau)
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
When RandR 1.2's transformation code is enabled, it rotates the cursor
image so that it appears upright on a rotated screen. This code
completely mangles 2-color cursors on hardware where the the mask and
source images are not interleaved due to two problems:
1. stride is calculated as (width / 4) rather than (width / 8), so the
expression (y * stride) skips two lines instead of one for every
time y is incremented.
2. cursor_bitpos ignores the 'mask' parameter if the hardware doesn't
specify any of the HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_* flags.
To fix this, refactor the code to pass the whole xf86CursorInfoPtr
through to cursor_bitpos and compute the correct stride there based on
the flags. If none of the SOURCE_MASK_INTERLEAVE flags are set, use
the total cursor size to move the 'image' variable into the mask part
of the image before computing the desired byte pointer.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Tested-by: Cyril Brulebois <kibi@debian.org>
This makes more things fatal than were fatal before, but that's correct;
if you need the VT, then failing to get it on regeneration means things
are about to go very very badly.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Nothing's using it, the SysV derivatives we support have their own
custom versions.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reput all ports when the display mode or panning has been changed by
RandR code. This makes the overlays appear in the correct position
on the screen.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Add a new hook ModeSet that will be called after display mode is
changed, or after the display has been panned.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Pass all of the src/dst coordinates to ReputImage so that drivers
don't necessarily have to do double bookkeeping.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Document the fact that ReputImage is used for stills as well as images.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
PutImage/PutStill respect the GC clip, however ReputImage does not.
PutImage/PutStill are supposed to be oneshot operations so ReputImage
should never expand the area covered by the clip, instead it should
only shrink if the window clip shrinks. So commandeer clientClip
into use by ReputImage and initially make it a copy of the original
GC composite clip. Whenever ReputImage needs reclipping update
clientClip with the newly calculated composite clip.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
clipOrg never changes except when clientClip changes, so instead of
keeping copies of both originals translate clientClip by clipOrg
immediately and just keep the translated clientClip.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Also reput PutVideo/GetVideo ports in AdjustFrame. This makes the
overlay track the screen panning instead of staying stationary in the
wrong place.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Nothing should change in AdjustFrame that would need the composite clip
to be recomputed.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
When ClipNotify gets called for a visible window, reput instead of
stopping the port. This eliminates nasty overlay flickering that
happens during clip changes.
If the window is invisible or if ReputImage isn't supported stop
and remove the port from the window as was done before.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Modify xf86XVReputOrStopPort() to allow stopping of all types of ports.
Will be useful later.
No functional change.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Luc Verhaegen <luc.verhaegen@basyskom.de>
Keith Packard
James Jones
Peter Hutterer
Julien Cristau
Alan Coopersmith
Adam Jackson
Aaron Plattner
Ville Syrjälä