And other 32-bit architectures, where uint32_t and CARD32 are
not the same type. Otherwise the build will fail with GCC 14
with errors like:
../hw/xwayland/xwayland-glamor.c: In function ‘xwl_glamor_get_formats’:
../hw/xwayland/xwayland-glamor.c:291:43: error: passing argument 3 of ‘xwl_get_formats_for_device’ from incompatible pointer type [-Wincompatible-pointer-types]
291 | num_formats, formats);
| ^~~~~~~~~~~
| |
| CARD32 * {aka long unsigned int *}
../hw/xwayland/xwayland-glamor.c:238:38: note: expected ‘uint32_t *’ {aka ‘unsigned int *’} but argument is of type ‘CARD32 *’ {aka ‘long unsigned int *’}
238 | uint32_t *num_formats, uint32_t **formats)
| ~~~~~~~~~~^~~~~~~~~~~
../hw/xwayland/xwayland-glamor.c:291:56: error: passing argument 4 of ‘xwl_get_formats_for_device’ from incompatible pointer type [-Wincompatible-pointer-types]
291 | num_formats, formats);
| ^~~~~~~
| |
| CARD32 ** {aka long unsigned int **}
../hw/xwayland/xwayland-glamor.c:238:62: note: expected ‘uint32_t **’ {aka ‘unsigned int **’} but argument is of type ‘CARD32 **’ {aka ‘long unsigned int **’}
238 | uint32_t *num_formats, uint32_t **formats)
| ~~~~~~~~~~~^~~~~~~
../hw/xwayland/xwayland-glamor.c:295:28: error: passing argument 3 of ‘xwl_get_formats’ from incompatible pointer type [-Wincompatible-pointer-types]
295 | num_formats, formats);
| ^~~~~~~~~~~
| |
| CARD32 * {aka long unsigned int *}
../hw/xwayland/xwayland-glamor.c:217:26: note: expected ‘uint32_t *’ {aka ‘unsigned int *’} but argument is of type ‘CARD32 *’ {aka ‘long unsigned int *’}
217 | uint32_t *num_formats, uint32_t **formats)
| ~~~~~~~~~~^~~~~~~~~~~
../hw/xwayland/xwayland-glamor.c:295:41: error: passing argument 4 of ‘xwl_get_formats’ from incompatible pointer type [-Wincompatible-pointer-types]
295 | num_formats, formats);
| ^~~~~~~
| |
| CARD32 ** {aka long unsigned int **}
../hw/xwayland/xwayland-glamor.c:217:50: note: expected ‘uint32_t **’ {aka ‘unsigned int **’} but argument is of type ‘CARD32 **’ {aka ‘long unsigned int **’}
217 | uint32_t *num_formats, uint32_t **formats)
| ~~~~~~~~~~~^~~~~~~
This allows e.g.
xfwm4 --vblank=xpresent
to hit the page flip path instead of copies.
In the future, Mesa might also use the Present extension with software
rendering.
Multiple benefits, in particular:
* Fullscreen windows can hit the page flip path
* X client presentation is properly synchronized to the Wayland
compositor refresh cycle via frame events
By default, Xwayland (as any Wayland client) uses the keymap set by the
Wayland compositor using the standard Wayland protocol.
There are some specific uses cases where a user would want to let the
X11 clients control the keymap. However, the Wayland compositor may
(re)send the keymap at any time, overriding whatever change was made
using the X11 mechanisms.
Add a new "-nokeymap" option to Xwayland to instruct Xwayland to simply
ignore the standard Wayland mechanism to set the keymap, hence leaving
the control entirely to the X11 clients.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If the old window pixmap was the screen pixmap.
Fixes screen->GetScreenPixmap() returning a stale pointer to a destroyed
pixmap with rootful Xwayland. It would result in a crash after resizing
the Xwayland window, or at the latest when shutting down.
Fixes: 6779ec5bf6 ("xwayland: Use window pixmap as a window buffer")
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1621
The cursor in DIX is actually split in two parts, the cursor itself and
the cursor bits, each with their own devPrivates.
The cursor itself includes the cursor bits, meaning that the cursor bits
devPrivates in within structure of the cursor.
Both Xephyr and Xwayland were using the private key for the cursor bits
to store the data for the cursor, and when using XSELINUX which comes
with its own special devPrivates, the data stored in that cursor bits'
devPrivates would interfere with the XSELINUX devPrivates data and the
SELINUX security ID would point to some other unrelated data, causing a
crash in the XSELINUX code when trying to (re)use the security ID.
CVE-2024-0409
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds a new command line option "-output" to specify on which output
Xwayland should be starting fullscreen when rootful.
That allows to run multiple instances of Xwayland rootful fullscreen on
multiple outputs.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
When putting the (root) window fullscreen, first search for an output
with the specified name, if any.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
At startup, the names of the Wayland outputs are not yet known,
therefore we cannot rely on those when running fullscreen rootful.
Make sure to check the fullscreen state once the Wayland output name
changes.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Add a output name to the xwl_screen.
This is preparation work for fullscreen rootful on a specific output,
no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Add a convenient function to search for an xwl_output based on its
XRandR name.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
When running rootful, we do not need to apply the output changes, these
are there just to track the names and show up as disconnected in XRandR.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
When running rootful, Xwayland would simply skip the creation of the CRTC
for the "real" outputs.
Instead, create the CRTC regardless of all outputs in rootful mode, but
mark them as disconnected when running rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
The fixed output is called "XWAYLAND0", yet if the compositor does not
support Wayland output names, the "real" output names may collide with
the fixed output name.
Use the same output serial as with the (default) real output names to
avoid reusing the same names.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Use the simpler form `{ 0 }` instead of `{ '\0', }` for the
initialization of the output name buffer.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Move the code which may update the fullscreen state of the rootful
window to a dedicated helper function.
No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
If there's no available window buffer.
This allows keeping xwl_window_buffer->damage_region empty for a newly
allocated xwl_window_buffer in xwl_window_buffers_get_pixmap, instead
of first populating it in xwl_window_buffer_add_damage_region and then
emptying it again.
Assuming the same number of window buffers, this results in one less
pixmap per toplevel window, saving pixmap storage.
v2:
* Preserve xwl_window_buffer_get_available behaviour (Olivier Fourdan)
v3:
* Leave RegionEmpty call where it was in xwl_window_buffers_get_pixmap,
so it takes effect for a newly allocated struct xwl_window_buffer.
* Consolidate xwl_window_buffer->pixmap assignment in the same place.
Use xwl_window_buffers_dispose instead. The pixmaps will need to be
re-created anyway, so keeping around the xwl_window_buffers doesn't
buy much. And dropping this makes the next commit simpler.
Also fold xwl_window_buffer_destroy_pixmap into its only remaining
caller, xwl_window_buffer_maybe_dispose.
v2: (Olivier Fourdan)
* Fix up indentation in xwl_window_set_window_pixmap
* Leave xwl_window_buffer_destroy_pixmap helper
GetScratchGC can't really fail without a bug elsewhere. Just FatalError
in that case, so we'd get a bug report if it ever happens, instead of
trying to limp along.
A clip should represent the area that is covering the current FB associated
with the CRTC. So making sure each input rect covers any area in the FB is
the first thing to do. If that is the case, the size and coordinates should
be adjusted based on the partial area in the FB the each rect covers. The size
elements need to be truncated if the rect's size exceeds FB's for the CRTC.
Then offsets should be applied to coordinates if the CRTC's offsets aren't 0.
And coordinate transposing and inversion are needed in case the rotated image
is assigned to the FB.
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
xserver fails to generate useable resolutions with 90Hz framerate
panels(encounter the same issue with 3 different 2.5k resolution
panels). All the resolutions shown by xrandr lead to blank screen except
the one written in EDID.
Ville Syrjälä from Intel provides a method to calculate the preferred
clock and refresh rate from the existing resolution table and this
works for the issue.
v2. xf86ModeVRefresh might return 0, need to check it before use it.
v3. reported by Markus on launchpad that the issue is not devided by 0,
it's the "preferred" being accessed unconditionally.
BugLink: https://launchpad.net/bugs/1999852
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1388
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Xwayland uses OEFFIS_DEVICE_ALL_DEVICES to get all possible device types
enabled.
Be more selective and specify explicitly keyboard and pointer instead of
relying on what "all devices" translates to in the stack.
See-also: https://gitlab.gnome.org/GNOME/mutter/-/issues/3194
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
After resizing Xephyr's window RRGetCrtcInfo returns the changed size,
but the RRCrtcChangeNotify event is not sent.
Call RRGetInfo(pScreen, TRUE) to update the current mode and send
notifications to clients.
Add a workaround to accept devices of the kernel's ofdrm driver.
Makes Xorg work on Open Firmware's pre-configured display with the
DRM graphics stack.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Resolve symbolic links before the PCI device check in fbdev_open.
Otherwise, opening device files that are symbolic links will fail.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1419
Signed-off-by: Moritz Bruder <muesli4@gmail.com>
TearFree support has been available in the modesetting driver for a year
with no issues reported. The code is mature and robust, with error handling
that's been vetted across many hardware configurations.
Notably, TearFree is also the only way to achieve a tear-free desktop with
mismatched displays and transformed CRTCs.
Enable TearFree by default for a smooth desktop experience out of the box.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Stop putting stack garbage into the gamma LUT blob reserved
fields.
Fixes: 245b9db03a ("modesetting: Use GAMMA_LUT when available")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Try to minimize the used hw cursor size in order to
minimize power consumption. There is no kernel query
for the minimum so we'll just probe around with
setcursor2 (using an invisible cursor image so
there will be no visual artifacts).
To avoid having to deal with absolutely every size stick
to power-of-two numbers. And with a bit of extra effort
we can determine whether non-square dimesions will also
work, which they do to some degree on current Intel GPUs.
On my Alderlake laptop I'm seeing a massive (up to .5W)
difference in power consumption between 64x64 vs. 256x256
cursors. While some of that is undoubtedly something that
needs to be fixed in i915's display data buffer allocation
code, it still makes sense to use as small as possible
cursor to minimize the wastege.
In case the crtc is rotated just punt to the max cursor size
for now since midlayer has already done the coordinate
transformations based on that. To make smaller cursors work
with rotation we'd either need to make the midlayer(s) aware
of the final cursor size, or just handle the whole roation
business in modesetting. I suspect the latter option would
be easier.
v2: Only allow square cursors in most cases for now as eg.
on modern Intel hardware non-square only works with
wide+short but not with narrow+tall cursors. Non-square
size may still be used when maximum limits aren't
square and the squared+POT'd dimensions would exceed
one of the max limits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Make sure we're not scanning out any fbs with fancy modifiers when
we try to light up new displays. This is already the case in cases
where the screen gets resized, but in cases where that doesn't happen
it might be possible for the modeset(s) to fail due to watermark/etc.
constraints imposed by the fancy modifiers. We can avoid that by
making sure everything gets unflipped before the modeset.
v2: make poll timeout infinite
s/in_modeset/pending_modeset/
deal with tearfree fallout (goto no_flip)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
X11 clients tend to assume that pointers have buttons. This
assumption means they often fail to handle the X error that
is generated when querying the button mapping of a pointer
device that lacks buttons.
This failure to handle the X error leads to those client
applications to abruptly exit.
This commit assigns vestigial buttons to the gesture pointer
device for the sole purpose of backward compatibility with
legacy X11 clients.
That technique is already employed for a different pointer,
the relative pointer device, for similar reasons, so this
just makes the legacy client compatibility more complete.
See https://gitlab.gnome.org/GNOME/mutter/-/issues/2353
When creating the output with the default "XWAYLAND<n>" name, we use
the MAX_OUTPUT_NAME value to allocate a lot more memory than necessary
to accommodate for future output names once they get updated, but by
doing so, we also send XRandR way too much (zeroed) data since the
"nameLength" value is (purposely) set too big.
So, instead, let's just update the name after creating the RR output,
this way we set both the name and nameLength to their correct values
while keeping the initial large allocation.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 3c07a01c42 - xwayland: Use xdg-output name for XRandR
Reviewed-by: Simon Ser <contact@emersion.fr>
At creation, Xwayland uses a generic output name ("XWAYLAND0", etc.) for
the XRandR outputs, and later, once the name is known from the Wayland
protocols, updates the output names using the actual names from the
Wayland compositor.
However, when doing so, it simply updates the string, the "nameLength"
isn't updated, so the name passed to the clients might either end up
being truncated or contain portions of the previous (initial) output
name.
Note, this is using a fixed size buffer initialized with zeros, so this
cannot leak any data other than the previous output name, so this is
mainly a cosmetic issue.
Update the output's "nameLength" when updating the output name.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 3c07a01c42 - xwayland: Use xdg-output name for XRandR
Reviewed-by: Simon Ser <contact@emersion.fr>
Alan Coopersmith
Florian Weimer
Michel Dänzer
Olivier Fourdan
José Expósito
Simon Ser
Peter Hutterer
Luke Dashjr
Dongwon Kim
Izumi Tsutsui
xurui
Chia-Lin Kao (AceLan)
Alexander Volkov
Twaik Yont
Thomas Zimmermann
Moritz Bruder
Sultan Alsawaf
Ville Syrjälä
Warren Togami