a8f9936f55
Prefer driver-provided modes when matching name strings to modelines.
...
Well, kinda. Strictly we prefer M_T_BUILTIN strongest since those are modes
where the driver has said it absolutely can't do anything else (VBE). Then
we look for user-defined modes, ie, modelines from the config file. Then
we consider modes reported by the monitor via EDID. Finally if nothing has
matched yet we consider the default mode pool.
Within each of the above-mentioned classes, modes with the M_T_PREFERRED bit
take priority over other modes in the same class.
This logic ensures that the timings sent to the monitor exactly match the
timings it reported as supported, which occasionally don't match the numbers
you might get for that mode from CVT or GTF.
2006-09-14 19:24:41 -04:00
81ef1b6d60
Mark EDID modes as driver modes. Infer virtual size from driver modes.
...
This allows the server to guess an appropriate initial virtual size and
resolution. The heuristic is to select the largest driver-reported mode
that matches the monitor's physical aspect ratio. We revalidate this
estimate after mode validation, since we may have filtered away all
modes that would fill that size.
Also, the EDID preferred timing is now marked as M_T_PREFERRED as well.
2006-09-14 19:18:58 -04:00
43d9edd31e
Attempt to add the 'mouse' driver in more situations.
...
Always add a mouse driver instance configured to send core events, unless
a core pointer already exists using either the mouse or void drivers. This
handles the laptop case where the config file only specifies, say,
synaptics, which causes the touchpad to work but not the pointing stick.
We don't double-instantiate the mouse driver to avoid the mouse moving twice
as fast, and we skip this logic when the user asked for a void core pointer
since that probably means they want to run with no pointer at all.
2006-09-14 19:09:02 -04:00
739224d05e
Load the default module set when no Module section is given in the config.
...
Also, synchronize that list with the list for the pseudoconfig file used
when starting with no config file. These really need to be better unified.
2006-09-14 19:03:32 -04:00
beac2bf1e4
Expand the default sync ranges to be large enough for 800x600@60.
2006-09-14 19:01:13 -04:00
7939c8dfb7
Bump the default pixel depth to 24, and default bpp to 32.
2006-09-14 18:57:57 -04:00
d89fee68d0
Record the maximum dot clock of the monitor, and filter by it.
2006-09-14 18:41:15 -04:00
511c60bc73
Bug #5386 : Synthesize modelines from EDID data.
2006-09-14 18:30:36 -04:00
8356be492c
Make sure _XSERVER64 is defined when it should be and gets tested.
2006-09-06 15:20:55 +02:00
ebbdc1342a
Remove calls to LoaderCheckUnresolved(), since it's now a stub.
2006-08-28 18:17:32 -04:00
b879356ce9
More #ifdef USE_DEPRECATED_KEYBOARD_DRIVER.
2006-08-24 15:50:15 -04:00
4ed311cf1c
Merge branch 'master' of git://anongit.freedesktop.org/git/xorg/xserver
2006-08-24 20:17:10 +02:00
733c4beb16
Add xorg.conf IgnoreABI option which does the same thing as -ignoreABI
2006-08-23 22:39:42 +00:00
ee5e2cbd2b
Un-cut-and-paste the mode rejection message.
2006-08-17 17:29:32 -04:00
43e42eef1f
Fix default mouse device on Linux, again.
...
It would be really nice if we only did this in one place instead of 40.
2006-08-17 16:22:07 -04:00
73e58adda9
Fixed segfault w/ broken Xinerama configs.
2006-08-16 18:18:51 +02:00
f7919c2879
xfree86: don't do legacy IO on ARM or S/390 (Debian #362641 )
...
Don't attempt to poke legacy IO ranges on ARM or S/390.
2006-08-12 20:43:25 +03:00
c4951e0a6b
Fix a mode sanity check to not break reduced-blanking setups (LCDs).
2006-08-10 20:49:06 -04:00
e1921f014b
Rename some mode tokens to better reflect their use.
...
Per #5386 , M_T_EDID -> M_T_DRIVER, since it's really for any driver-detected
mode. Also add M_T_PREFERRED bit, to select a 'best' mode out of a set.
2006-08-10 20:43:15 -04:00
db82e12fac
Remove TargetRefresh option from the autoconfig logic.
...
The default target of 75Hz is almost always wrong for LCDs.
2006-08-09 14:55:17 -04:00
79016d4036
Bug #5386 (partial): Move CVT mode generator from cvt(1) to server core, and
...
export it from the X server to modules.
2006-07-28 16:02:02 -04:00
990a400905
Remove getconfig horrorshow. Replace with a static built-in rule list for now.
2006-07-26 19:03:39 -04:00
39158e98ac
Remove another latent PowerMAX hunk.
...
All your favorite running jokes of 2005, today!
2006-07-26 18:39:28 -04:00
70869fc677
Yet more dead code.
2006-07-21 23:39:37 -04:00
7c1b2ee7a8
static markup, more dead code.
2006-07-21 23:35:13 -04:00
bca9364f3f
Remove the loader's required and referenced symbol lists, dead code.
2006-07-21 18:41:46 -04:00
0aaac95b0d
Remove RCS tags. Fix Xprint makefile braindamage.
2006-07-21 17:56:00 -04:00
eeaad0e956
Fix the RandR failure path for rotated screens.
2006-07-21 15:20:40 -07:00
985c34bf06
Remove the DDXTIME conditional, for being unused.
2006-07-20 17:33:13 -04:00
84683f19b4
get rid of XFree86LOADER, XFree86Server, XFree86Module, and IN_MODULE
...
Get rid of almost all uses of these definitions. They're still defined for
delinquent out-of-tree drivers, and also for the Mesa build. As well as
for miinitext.c. But largely gone.
2006-07-18 18:17:38 -04:00
b3e4d1d1f4
PPC64 build fix.
2006-07-06 18:51:29 -04:00
863f5cc31b
fix compiler warning in hw/xfree86/common/xf86Config.c
2006-07-05 13:26:34 -07:00
179737d4a0
Bug 7145: fix build with gcc 2.95 & other c89 compilers
...
Move variable declarations to start of blocks as required by c89
2006-06-30 15:56:40 -07:00
36756fdb2d
Make sure <execinfo.h> is actually included when needed.
...
configure only defines HAVE_BACKTRACE, not HAVE_EXECINFO_H.
This could cause problems on platforms where the size of a pointer is greater
than that of an integer, see
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=363218 .
2006-06-24 15:09:24 +02:00
2b58685402
Check setuid() return value. Bugzilla #7116 .
2006-06-20 21:07:53 +02:00
98a602fab1
Don't bother building RAC as a module, that's just absurd.
2006-06-18 23:54:04 -04:00
9fa73721f0
fix up EnableDisableExtension() and EnableDisableExtensionError() prototypes
2006-06-08 10:27:28 -07:00
f90761b06e
Add a token for EDID-supplied modes.
2006-06-07 13:58:24 -04:00
d00aa6b855
Delete a (now misleading) message from the crash handler.
2006-06-07 11:44:36 -04:00
5b703f847d
Fix type confusion.
2006-06-02 12:05:32 +00:00
6d594ebc66
Ditch more alternate-loader braindamage.
2006-06-01 20:22:39 +00:00
a3a4221495
Add bitmap to the ignored module list.
2006-06-01 19:53:06 +00:00
ee689c1042
Ignore requests to load GLcore and speedo.
2006-06-01 19:49:55 +00:00
07c731a2bc
Bug #5089 : Die, libbitmap, die!
2006-06-01 19:37:53 +00:00
a73e0f8cdf
Die XTESTEXT1, die!
2006-06-01 18:47:47 +00:00
fd8bde8bb0
Remove -xkbmap argument.
2006-05-29 11:14:03 +00:00
354086d7e8
Don't do fixup_video_driver_list if no drivers. (I had signal 11 and core
...
dump when drivers not installed yet.)
TODO: fix fixup_video_driver_list to handle NULL argument.
2006-05-25 23:32:33 +00:00
deebf6bd51
Bug #4139 : Fix a BAR remapping bug that could lead to IERR and system hang.
...
(Egbert Eich)
2006-05-18 23:52:51 +00:00
86ffb46358
Bug #5209 : Re-enable building APM and ACPI support. (Michel Dänzer)
2006-05-09 18:04:29 +00:00
fc91ca069d
Redact a few mentions of speedo font support.
2006-05-03 17:50:10 +00:00
Adam Jackson
Luc Verhaegen
Michel Dänzer
Matthias Hopf
David Nusinow
Bastian Blank
Adam Jackson
Aaron Plattner
Daniel Stone
Greg Kroah-Hartman
Jens Granseuer
Matthieu Herrb
Adam Jackson
Jeremy C. Reed