There was a time when setting a mode on a CRTC would not depend on the
associated connector's state. If a mode had been set successfully once,
it would mean it would work later on.
This changed with the introduction of new connectors type that now
require a link training sequence (DP, HDMI 2.0), and that means that
some events may have happened while the X server was not master that
would then prevent the mode from successfully be restored to its
previous state.
This patch relaxes the requirement that all modes should be restored on
EnterVT, or the entire X-Server would go down by allowing modesets to
fail (with some warnings). If a modeset fails, the CRTC will be
disabled, and a RandR event will be sent for the desktop environment to
fix the situation as well as possible.
Additional patches might be needed to make sure that the user would
never be left with all screens black in some scenarios.
v2 (Martin Peres):
- whitespace fixes
- remove the uevent handling (it is done in a previous patch)
- improve the commit message
- reduce the size of the patch by not changing lines needlessly
- return FALSE if one modeset fails in ignore mode
- add comments/todos to explain why we do things
- disable the CRTCs that failed the modeset
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Closes: #1010
(cherry picked from commit efb3abddd4)
Normally, we would receive a uevent coming from Linux's DRM subsystem,
which would trigger the check for disappearing/appearing resources.
However, this event is not received when X is not master (another VT
is selected), and so the userspace / desktop environment would not be
notified about the changes that happened while X wasn't master.
To fix the issue, this patch forces a refresh on EnterVT by splitting
the kms-checking code from the uevent handling into its own (exported)
function called drmmode_update_kms_state. This function is then called
from both the uevent-handling function, and on EnterVT right before
restoring the modes.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
(cherry picked from commit 293cf660c9)
At the point where xf86BusProbe runs we haven't yet taken our own VT,
which means we can't perform drm "master" operations on the device. This
is tragic, because we need master to fish the bus id string out of the
kernel, which we can only do after drmSetInterfaceVersion, which for
some reason stores that string on the device not the file handle and
thus needs master access.
Fortunately we know the format of the busid string, and it happens to
almost be the same as the ID_PATH variable from udev. Use that instead
and stop calling drmSetInterfaceVersion.
(backported from commit 0816e8fca6)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
EDID1.4 replaced GTF Bit with Continuous or Non-Continuous Frequency Display.
Check the "Display Range Limits Descriptor" for GTF support.
If panel doesn't support GTF, then add gtf modes.
Otherwise X will only show the modes in "Detailed Timing Descriptor".
V2: Coding style changes.
V3: Coding style changes, remove unused variate.
V4: remove unused variate.
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/313
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 6a79a737e2)
During a VT-Switch a raw pointer to the shared cursor object
is saved which is then freed (in case of low refcount) by a call to
xf86CursorSetCursor with argument pCurs = NullCursor.
This leads to a dangling pointer which can follow in a use after free.
This fix ensures that there is a shared handle saved for the VT-Switch cycle.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit 7ae221ad57)
Mostly http->https conversions, but also replaces gitweb.fd.o
with gitlab.fd.o, and xquartz.macosforge.org with xquartz.org.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit a5151f58cf)
Since the introduction of "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize" the fb_id isn't initialited at
drmmode_xf86crtc_resize.
Rotate operation of XRandR uses rotate_bo. So in this case the fb_id
associated to the front_bo is not initialized at drmmode_set_mode_major.
So fd_id remains 0.
As every call to drmmode_xf86crtc_resize allocates a new front_bo we should
destroy unconditionally the old_front_bo if operation success. So we free
the allocated GBM handles.
This avoids crashing xserver with a OOM in the RPI4 1Gb at 4k resolution
after 3 series xrandr rotations from normal to left and vice versa reported at
https://github.com/raspberrypi/firmware/issues/1345
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1024
Fixes: 8774532121 "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize"
(cherry picked from commit 73480f172a)
The miPointerSpriteFunc swcursor code expects there to only be a single
framebuffer and when the cursor moves it will undo the damage of the
previous draw, potentially overwriting what ever is there in a new
framebuffer installed after a flip.
This leads to all kind of artifacts, so we need to disable pageflipping
when a swcursor is used.
The code for this has shamelessly been copied from the xf86-video-amdgpu
code.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/issues/828
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0aaac8d783)
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@displaylink.com>
../hw/xfree86/os-support/stub/stub_init.c: In function ‘xf86OSInputThreadInit’:
../hw/xfree86/os-support/stub/stub_init.c:29:1: warning: old-style function definition [-Wold-style-definition]
(cherry picked from commit 7c266cafed)
The atomic driver has issues with modesetting when stealing
connectors from a different crtc, a black screen when doing rotation
on a different crtc, and in general is just a mapping of the legacy
helpers to atomic. This is already done in the kernel, so just
fallback to legacy by default until this is fixed.
Please backport to 1.20, as we don't want to enable it for everyone
there. It breaks for existing users.
The fixes to make the xserver more atomic have been pending on the
mailing list for ages.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110375
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110030
References: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/36/commits
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit f0d78b47ac)
I introduced this error with the MST hotplug code, but it can trigger
on zaphod setups, and is perfectly fine. There is no support for
MST/hotplug on zaphod setups currently, so we can just skip over
the dynamic connector handling here. However we shouldn't skip
over the lease handling so move it into the codepath.
Fixes: 9257b1252d ("modesetting: add dynamic connector hotplug support (MST) (v3)")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1cfdd1a965)
Avoids a crash in xf86RotatePrepare -> DamageRegister during
CreateScreenResources if rotation or another transform is configured for
any connected RandR output in xorg.conf. The generic rotation/transform
code generally can't work without the root window currently.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/969
Fixes: 094f42cdfe "xfree86/modes: Call xf86RotateRedisplay from
xf86CrtcRotate"
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 6a5e47c57d)
For the miClearDrawable prototype. Apparently it doesn't get pulled in
for some build configurations, breaking the build.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit a24a786fc8)
Since the Solaris kernel tracks IOPL per thread, and doesn't inherit
raised IOPL levels when creating a new thread, we need to turn it on
in the input thread for input drivers like vmmouse that need register
access to work correctly.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit 12769c516d)
Allows os backends to run additional code as necessary to set up the
input thread.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit ea1527a8a6)
Allows ddx's to run additional code as necessary to set up the
input thread.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit 4ad21c3247)
Keeping track of kernel state in user space doesn't buy us anything,
and introduces bugs, as we were keeping global state but the Solaris
kernel tracks IOPL per thread.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
(cherry picked from commit 7533fa9bd5)
Calling rrGetScrPriv when RandR isn't initialized causes an assertion
failure that aborts the server:
Xorg: ../include/privates.h:121: dixGetPrivateAddr: Assertion `key->initialized' failed.
Thread 1 "Xorg" received signal SIGABRT, Aborted.
0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
(gdb) bt
#0 0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
#1 0x00007ffff7892897 in abort () from /usr/lib/libc.so.6
#2 0x00007ffff7892767 in __assert_fail_base.cold () from /usr/lib/libc.so.6
#3 0x00007ffff78a1526 in __assert_fail () from /usr/lib/libc.so.6
#4 0x00007ffff7fb57c1 in dixGetPrivateAddr (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:121
#5 0x00007ffff7fb5822 in dixGetPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:136
#6 0x00007ffff7fb586a in dixLookupPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:166
#7 0x00007ffff7fb8445 in CreateScreenResources (pScreen=0x555555ab1790) at ../hw/xfree86/drivers/modesetting/driver.c:1335
#8 0x000055555576c5e4 in xf86CrtcCreateScreenResources (screen=0x555555ab1790) at ../hw/xfree86/modes/xf86Crtc.c:744
#9 0x00005555555d8bb6 in dix_main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/main.c:214
#10 0x00005555557a4f0b in main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/stubmain.c:34
This can happen, for example, if the server is configured with Xinerama
and there is more than one X screen:
Section "ServerLayout"
Identifier "crash"
Screen 0 "modesetting"
Screen 1 "dummy" RightOf "modesetting"
Option "Xinerama"
EndSection
Section "Device"
Identifier "modesetting"
Driver "modesetting"
EndSection
Section "Screen"
Identifier "modesetting"
Device "modesetting"
EndSection
Section "Device"
Identifier "dummy"
Driver "dummy"
EndSection
Section "Screen"
Identifier "dummy"
Device "dummy"
EndSection
The problem does not reproduce if there is only one X screen because of
this code in xf86RandR12Init:
#ifdef PANORAMIX
/* XXX disable RandR when using Xinerama */
if (!noPanoramiXExtension) {
if (xf86NumScreens == 1)
noPanoramiXExtension = TRUE;
else
return TRUE;
}
#endif
Fix the problem by checking dixPrivateKeyRegistered(rrPrivKey) before
calling rrGetScrPriv. This is similar to what the xf86-video-amdgpu
driver does:
fd66f5c0be/src/amdgpu_kms.c (L388)
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit 4226c6d032)
Fixes random garbage being visible intermittently.
Reviewed-by: Adam Jackson <ajax@redhat.com>
(Cherry picked from commit 9ba13bac9d)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If a new rotate buffer was allocated. This makes sure the new buffer
has valid transformed contents when it starts being displayed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
(Cherry picked from commit 327df450ff)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes sure any pending drawing to a new scanout buffer will be
visible from the start.
This makes the finish call in drmmode_copy_fb superfluous, so remove it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
(Cherry picked from commit c66c548eab)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We now ask Glamor to use EGL_MESA_query_driver to obtain the DRI driver
name; if successful, we use that as the DRI driver name. Following the
existing dri2.c logic, we also use the same name for the VDPAU driver,
except for i965 (and now iris), where we switch to the "va_gl" fallback.
This allows us to bypass the PCI ID lists in xserver and centralize the
driver selection mechanism inside Mesa. The hope is that we no longer
have to update these lists for any future hardware.
(backported from commit 8d4be7f6c4)
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
isastream() was never more than a stub in glibc, and was removed in
glibc-2.30 by commit a0a0dc83173c ("Remove obsolete, never-implemented
XSI STREAMS declarations").
Bug: https://bugs.gentoo.org/700838
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit e6ab7f9f34)
Slightly simplifies the callers since they don't need to check for
non-NULL anymore.
I do extremely hate the workarounds here to suppress misprite taking the
cursor down though. Surely there's a better way.
[1.20: Do not in fact simplify the callers as above, since it would
change the ABI. - ajax]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit ff310903f3)
<sys/io.h> on ARM hasn't worked for a long, long time, so it was removed
it from glibc upstream.
Remove the include to avoid a compilation failure on ARM with glibc.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/840
(cherry picked from commit fe4cd0e7f5)
During startup, the xfree86 DDX's InitOutput() calls PreInit for
protocol screens first, and then GPU screens. On teardown, dix_main()
calls CloseScreen in the reverse order: GPU screens first starting with
the last one and then working backwards, and then protocol screens also
in reverse order.
InitOutput() calls ScreenInit in the wrong order: for GPU screens first and then
for protocol screens. This causes a problem for drivers that have global state
that is tied to the first screen that calls ScreenInit.
Fix this by simply re-ordering the for loops to call PreInit for
protocol screens first and then for GPU screens second.
(cherry picked from commit e5e9a8ca91)
ms_present_get_crtc() returns an RRCrtcPtr, but derives it from a xf86CrtcPtr
found via ms_dri2_crtc_covering_drawable()=>ms_covering_crtc(). As a result, it
depends on all associated DIX ScreenRecs having an xf86CrtcConfigPtr DDX
private.
Some DIX ScreenRecs don't have an xf86CrtcConfigPtr DDX private, but do have an
rrScrPrivPtr DDX private. Given that we can derive all of the information we
need from RandR, we can support these screens by avoiding the use of xf86Crtc.
This change implements an RandR-based path for ms_present_get_crtc(), allowing
drawables to successfully fall back to syncing to the primary output, even if
the slave doesn't have an xf86CrtcConfigPtr DDX private.
Without this change, if a slave doesn't have an xf86CrtcConfigPtr DDX private,
drawables will fall back to 1 FPS if they overlap an output on that slave.
Signed-off-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit 562c7888be)
DIX ScreenRecs don't necessarily have an xf86CrtcConfigPtr DDX private.
ms_covering_crtc() assumes that they do, which can result in a segfault.
Update ms_covering_crtc() to check the XF86_CRTC_CONFIG_PTR() returned pointer
before dereferencing it. This will still mean that ms_covering_crtc() can't fall
back to the primary output when a drawable overlaps a slave output (going to the
1 FPS default instead), but it won't segfault.
Signed-off-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit 797e7a0ceb)
ms_covering_crtc() uses RRFirstOutput() to determine a primary output to fall
back to if a drawable is overlapping a slave output.
If the primary output is a slave output, RRFirstOutput() will return a slave
output even if passed a master ScreenPtr. ms_covering_crtc() dereferences the
output's devPrivate, which is invalid for non-modesetting outputs, and can
crash.
Changing RRFirstOutput() could have unintended side effects for other callers,
so this change replaces the call to RRFirstOutput() with ms_first_output().
ms_first_output() ignores the primary output if it doesn't match the given
ScreenPtr, choosing the first connected output instead.
Signed-off-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit 3ef9029ace)
The autoconf build for the modesetting driver still relied on
xorg-macros.m4 for string replacements and did not include the
top-level manpages.am. As a result, no substitutions took place after
commit 2e497bf887.
This should be a candidate for the 1.20 branch.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
(cherry picked from commit de0d39f825)
This fixes 'non-desktop' displays staying powered on after their lease
has been revoked.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111620
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Copied from Mesa with no modifications.
This update brings in a significant number of new platform ID's.
Syncs with mesa up to commit e334a595e ("intel/icl: Add new ICL
PCI-IDs").
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a8d9ebeb43)
A user of Adélie Linux reported that modesetting wasn't working properly on
their Intel i7-9700K-integrated UHD 630 GPU. Xorg.0.log showed:
[ 131.902] (EE) modeset(0): [DRI2] No driver mapping found for PCI device 0x8086 / 0x3e98
[ 131.902] (EE) modeset(0): Failed to initialize the DRI2 extension.
Indeed, that PCI ID is missing from i965_pci_ids. Adding it fixed the issue
and allowed the system to work with i965_dri under modesetting.
(cherry picked from commit d3a26bbf61)
If the driver calls xf86HandleColormaps, CMapChangeGamma updates the HW
gamma LUT of all CRTCs via xf86RandR12LoadPalette. However,
xf86RandR12ChangeGamma was then clobbering the gamma LUT of the RandR
1.2 compatibility output's CRTC with the gamma curves computed from the
screen's global gamma values.
Fix this by bailing if xf86RandR12LoadPalette is installed.
Fixes: 02ff0a5d7e "xf86RandR12: Fix XF86VidModeSetGamma triggering a
BadImplementation error"
(cherry picked from commit 30044b2253)
Noticed when porting this logic to xf86-video-nouveau, and valgrind
complained about conditional jump based on uninitialized data.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
(cherry picked from commit 48b1af2718)
Believe it or not, somehow we've never done this in legacy mode! We
currently simply change the DPMS property on the CRTC's output's
respective DRM connector, but this means that we're just setting the
CRTC as inactive-not disabled. From the perspective of the kernel, this
means that any shared resources used by the CRTC are still in use.
This can cause problems for drivers that are not yet fully atomic,
despite using the atomic helpers internally. For instance: if CRTC-1 and
CRTC-2 are still enabled and use shared resources within the kernel (an
MST topology, for example), and then userspace tries to go enable CRTC-3
on the same topology this might suddenly fail if CRTC-3 needs the shared
resources CRTC-1 and CRTC-2 are using. While I don't know of any
situations in the mainline kernel that actually trigger this, future
plans for reworking the atomic check of MST drivers are absolutely
going to make this into a real issue (they already are in my WIP
branches for the kernel).
So: actually do the right thing here and disable CRTCs when they're not
going to be used anymore, even in legacy mode.
Signed-off-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit 7a44e8d400)
Could cause privilege elevation and/or arbitrary files overwrite, when
the X server is running with elevated privileges (ie when Xorg is
installed with the setuid bit set and started by a non-root user).
CVE-2018-14665
Issue reported by Narendra Shinde and Red Hat.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 50c0cf885a)
Misplaced parenthesis caused us to compare the sizeof, not the readlink return
value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit bd5fe7593f)
The destination is always either on the stack or in the middle of some
struct.
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 43a0f9a5db)
The old code would not in fact validate the option value, though it
might complain about it in the log. It also didn't let you set some
legal values that the -maxclients command line option would.
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit 7d689f049c)
This saves us having to make sure we clean it up.
Pointed out by coverity.
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit b6c29a881e)
The X will be crashed on the system with other DDX driver,
such as amdgpu.
show the log like:
randr: falling back to unsynchronized pixmap sharing
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4e)
(EE) 1: /usr/lib/xorg/Xorg (0x55cb0151a000+0x1b5ce9)
(EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f1587a1d000+0x11390)
(EE)
(EE) Segmentation fault at address 0x0
(EE)
The issue is that modesetting as the master, and amdgpu as the slave.
Thus, when the master attempts to access pSlavePixPriv in ms_dirty_update(),
problems result due to the fact that it's accessing AMD's 'ppriv' using the
modesetting structure definition.
Apart from fixing crash issue, the patch fix other issue in master interface
in which driver should refer to master pixmap.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Goins <agoins@nvidia.com>
(cherry picked from commit f79e536851)
Kishore Kadiyala
Martin Peres
Michel Dänzer
Olivier Fourdan
Adam Jackson
Aaron Ma
Martin Weber
Alan Coopersmith
Jose Maria Casanova Crespo
Hans de Goede
Jon Turney
Maarten Lankhorst
Dave Airlie
Aaron Plattner
Kenneth Graunke
Matt Turner
Alex Goins
Sven Joachim
Andres Rodriguez
Matt Roper
A. Wilcox
Michel Dänzer
Maya Rashish
Ilia Mirkin
Lyude Paul
Matthieu Herrb
Peter Hutterer
Jim Qu