A misplaced error check can cause this failure scenario, and does
so reliably as tested on Ubuntu 21.04 with KDE Plasma 5 desktop
within the first few seconds of login session startup, rendering
VRR under modesetting-ddx unusable:
1. Some X11 client application changes some window property.
2. ms_change_property() is called as part of the property change
handling call chain (client->requestVector[X_ChangeProperty]).
It removes itself temporarily from the call chain - or so it
thinks, hooking up saved_change_property instead.
3. ret = saved_change_property(client) is called and fails
temporarily for some non-critical reason.
4. The misplaced error check returns early (error abort), without
first restoring ms_change_property() as initial X_ChangeProperty
handler in the call chain again.
-> Now ms_change_property() has removed itself permanently from the
property handler call chain for the remainder of the X session
and VRR property changes on windows are no longer handled, ie.
VRR no longer gets enabled/disabled in response to window VRR
property changes.
Place the error check at the proper place, just as it is correctly
done by amdgpu-ddx, and in modesetting-ddx ms_delete_property()
function.
Verified to fix VRR handling with an AMD gpu under KDE desktop
session.
Please consider merging before branching the server 1.21 branch.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
This mode for displays running on evdi/udl as side effect of failed glamor_egl_init
reverse_prime_offload_mode was initialized to FALSE
After Mesa upgrade to 21.0.0 GL_RENDERER is not llvmpipe that results in successful glamor_egl_init
and reverse_prime_offload_mode enabled.
This commit is explicitly disabling reverse_prime_offload_mode for evdi and udl drivers
Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
If the kernel exposes GAMMA_LUT and GAMMA_LUT_SIZE properties and the size is
not what the server has pre-configured for the crtc, free the old gamma ramp
memory allocated by the server and replace it with new allocations of the
appropriate size.
In addition, when GAMMA_LUT is available, use drmModeCreatePropertyBlob() and
drmModeObjectSetProperty() to set the gamma ramp rather than using the legacy
drmModeCrtcSetGamma() function.
Add a new option "UseGammaLUT" to allow disabling this new behavior and falling
back to drmModeCrtcSetGamma() unconditionally.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
There was a time when setting a mode on a CRTC would not depend on the
associated connector's state. If a mode had been set successfully once,
it would mean it would work later on.
This changed with the introduction of new connectors type that now
require a link training sequence (DP, HDMI 2.0), and that means that
some events may have happened while the X server was not master that
would then prevent the mode from successfully be restored to its
previous state.
This patch relaxes the requirement that all modes should be restored on
EnterVT, or the entire X-Server would go down by allowing modesets to
fail (with some warnings). If a modeset fails, the CRTC will be
disabled, and a RandR event will be sent for the desktop environment to
fix the situation as well as possible.
Additional patches might be needed to make sure that the user would
never be left with all screens black in some scenarios.
v2 (Martin Peres):
- whitespace fixes
- remove the uevent handling (it is done in a previous patch)
- improve the commit message
- reduce the size of the patch by not changing lines needlessly
- return FALSE if one modeset fails in ignore mode
- add comments/todos to explain why we do things
- disable the CRTCs that failed the modeset
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Closes: #1010
Normally, we would receive a uevent coming from Linux's DRM subsystem,
which would trigger the check for disappearing/appearing resources.
However, this event is not received when X is not master (another VT
is selected), and so the userspace / desktop environment would not be
notified about the changes that happened while X wasn't master.
To fix the issue, this patch forces a refresh on EnterVT by splitting
the kms-checking code from the uevent handling into its own (exported)
function called drmmode_update_kms_state. This function is then called
from both the uevent-handling function, and on EnterVT right before
restoring the modes.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Fetch VariableRefresh option value from X conf file for
modesetting backend DDX driver. This option defaults to false,
and must be set to "true" in conf file for variable refresh
support in the DDX driver.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
Window wrappers gets the notification when the window
properties changes. These wrappers are mainly used to
keep track of per-window _VARIABLE_REFRESH property values.
These changes have been ported from AMDGPU
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
These changes have been ported from AMD GPU DDX driver.
This patch adds support for setting the CRTC variable refresh property
for suitable windows flipping via the Present extension.
In order for a window to be suitable for variable refresh it must have
the _VARIABLE_REFRESH property set by the MESA and inform Modesetting
DDX driver with window property updates.
Then the window must pass the checks required to be suitable for
Present extension flips - it must cover the entire X screen and no
other window may already be flipping. And also DRM connector should
be VRR capable.
With these conditions met every CRTC for the X screen will have their
variable refresh property set to true.
Kernel Changes to support this feature in I915 driver is under development.
Tested with DOTA2, Xonotic and custom GLX apps.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Calling rrGetScrPriv when RandR isn't initialized causes an assertion
failure that aborts the server:
Xorg: ../include/privates.h:121: dixGetPrivateAddr: Assertion `key->initialized' failed.
Thread 1 "Xorg" received signal SIGABRT, Aborted.
0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
(gdb) bt
#0 0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
#1 0x00007ffff7892897 in abort () from /usr/lib/libc.so.6
#2 0x00007ffff7892767 in __assert_fail_base.cold () from /usr/lib/libc.so.6
#3 0x00007ffff78a1526 in __assert_fail () from /usr/lib/libc.so.6
#4 0x00007ffff7fb57c1 in dixGetPrivateAddr (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:121
#5 0x00007ffff7fb5822 in dixGetPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:136
#6 0x00007ffff7fb586a in dixLookupPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:166
#7 0x00007ffff7fb8445 in CreateScreenResources (pScreen=0x555555ab1790) at ../hw/xfree86/drivers/modesetting/driver.c:1335
#8 0x000055555576c5e4 in xf86CrtcCreateScreenResources (screen=0x555555ab1790) at ../hw/xfree86/modes/xf86Crtc.c:744
#9 0x00005555555d8bb6 in dix_main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/main.c:214
#10 0x00005555557a4f0b in main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/stubmain.c:34
This can happen, for example, if the server is configured with Xinerama
and there is more than one X screen:
Section "ServerLayout"
Identifier "crash"
Screen 0 "modesetting"
Screen 1 "dummy" RightOf "modesetting"
Option "Xinerama"
EndSection
Section "Device"
Identifier "modesetting"
Driver "modesetting"
EndSection
Section "Screen"
Identifier "modesetting"
Device "modesetting"
EndSection
Section "Device"
Identifier "dummy"
Driver "dummy"
EndSection
Section "Screen"
Identifier "dummy"
Device "dummy"
EndSection
The problem does not reproduce if there is only one X screen because of
this code in xf86RandR12Init:
#ifdef PANORAMIX
/* XXX disable RandR when using Xinerama */
if (!noPanoramiXExtension) {
if (xf86NumScreens == 1)
noPanoramiXExtension = TRUE;
else
return TRUE;
}
#endif
Fix the problem by checking dixPrivateKeyRegistered(rrPrivKey) before
calling rrGetScrPriv. This is similar to what the xf86-video-amdgpu
driver does:
fd66f5c0be/src/amdgpu_kms.c (L388)
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Commit cb1b1e184 modified msSharePixmapBacking() to derive modesettingPtr from
the 'screen' argument. Unfortunately, the name of the argument is misleading --
the screen is the slave screen. If the master is modesetting,
and the slave is not modesetting, it will segfault.
To fix the problem, this change derives modesettingPtr from
ppix->drawable.pScreen. This method is already used when calling
ms->glamor.shareable_fd_from_pixmap() later in the function.
To avoid future issues, this change also renames the 'screen' argument to
'slave'.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
New now ask Glamor to use EGL_MESA_query_driver to obtain the DRI driver
name; if successful, we use that as the DRI driver name. Following the
existing dri2.c logic, we also use the same name for the VDPAU driver,
except for i965 (and now iris), where we switch to the "va_gl" fallback.
This allows us to bypass the PCI ID lists in xserver and centralize the
driver selection mechanism inside Mesa. The hope is that we no longer
have to update these lists for any future hardware.
Now that we've fixed LoaderSymbolFromModule this should work properly.
This reverts commit 5c7c6d5cff.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Move from the xf86 specific ScrnInfoRec::privates, to the dix private
handling. Since there's no FreeScreen function in ScreenPtr, fold the
former within the existing CloseScreen.
Users, such as modesetting are updated, and out of tree drivers will
need equivalent, yet trivial, patch.
Note: we need to ensure that the screen private is unset and the screen
callbacks are restored in our CloseScreen function.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This might be an error or not, for example refusing to work on llvmpipe
is normal and expected. glamor_egl_init() will print X_ERROR messages if
appropriate, so we don't need to here.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The atomic driver has issues with modesetting when stealing
connectors from a different crtc, a black screen when doing rotation
on a different crtc, and in general is just a mapping of the legacy
helpers to atomic. This is already done in the kernel, so just
fallback to legacy by default until this is fixed.
Please backport to 1.20, as we don't want to enable it for everyone
there. It breaks for existing users.
The fixes to make the xserver more atomic have been pending on the
mailing list for ages.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110375
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110030
References: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/36/commits
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The miPointerSpriteFunc swcursor code expects there to only be a single
framebuffer and when the cursor moves it will undo the damage of the
previous draw, potentially overwriting what ever is there in a new
framebuffer installed after a flip.
This leads to all kind of artifacts, so we need to disable pageflipping
when a swcursor is used.
The code for this has shamelessly been copied from the xf86-video-amdgpu
code.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/issues/828
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The X will be crashed on the system with other DDX driver,
such as amdgpu.
show the log like:
randr: falling back to unsynchronized pixmap sharing
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4e)
(EE) 1: /usr/lib/xorg/Xorg (0x55cb0151a000+0x1b5ce9)
(EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f1587a1d000+0x11390)
(EE)
(EE) Segmentation fault at address 0x0
(EE)
The issue is that modesetting as the master, and amdgpu as the slave.
Thus, when the master attempts to access pSlavePixPriv in ms_dirty_update(),
problems result due to the fact that it's accessing AMD's 'ppriv' using the
modesetting structure definition.
Apart from fixing crash issue, the patch fix other issue in master interface
in which driver should refer to master pixmap.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Goins <agoins@nvidia.com>
Instead of having every video driver loop over any pending leases to
free them during CloseScreen, do this up in the DIX layer by
terminating leases when a leased CRTC or Output is destroyed and
(just to make sure), also terminating leases in RRCloseScreen. The
latter should "never" get invoked as any lease should be associated
with a resource which was destroyed.
This is required as by the time the driver's CloseScreen function is
invoked, we've already freed all of the DIX randr structures and no
longer have any way to reference the leases
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
Cc: Thomas Hellstrom <thellstrom@vmware.com>
When setting DefaultDepth to 16 in the Screen section, the current
code requests a 32 bpp framebuffer, however the X-Server seems to
assumes 16 bpp.
Fixes commit 21217d0216 ("modesetting: Implement 32->24 bpp
conversion in shadow update")
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
We don't want universal_planes unless we're using atomic APIs for
modesetting, and the kernel already enables universal_planes
automatically when atomic is enabled.
If we enable universal_planes when we're not using atomic, then we
won't have selected a plane for each crtc, and this will break lease
creation which requires planes for each output when universal_planes
is enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This lets an application open a suitable DRM device and pass the file
descriptor to the mode setting driver through an X server command line
option, '-masterfd'.
There's a companion application, xlease, which creates a DRM master by
leasing an output from another X server. That is available at
git clone git://people.freedesktop.org/~keithp/xlease
v2:
Always print usage, but note that it can't be used if
setuid/gid
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
We don't want DRM file descriptors to leak to child processes.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Use the DRM_CAP_ADDFB2_MODIFIERS query to make sure the kms
driver supports modifiers in the addfb2 ioctl, and fall back
to addfb ioctl without modifiers if modifiers are unsupported.
E.g., as of Linux 4.17, nouveau-kms so far does not suppport
modifiers and gets angry if drmModeAddFB2WithModifiers() is
called (-> failure to set a video mode -> blank screen), but
Mesa's nvc0+ gallium driver causes gbm_bo_get_modifier() to
return a valid modifier by translating the default tiling of
bo's created via gbm_bo_create() into a modifier other than
DRM_FORMAT_MOD_INVALID (see Mesa's nvc0_miptree_get_modifier()).
Testing for != DRM_FORMAT_MOD_INVALID is apparently not
sufficient for safe use of drmModeAddFB2WithModifiers.
Bonus: Handle potential failure of populate_format_modifiers().
The required DRM_CAP is defined since libdrm v2.4.65, and we
require v2.4.89+ for the server, so we can use it unconditionally.
Tested on intel-kms, radeon-kms, nouveau-kms. Fixes failure on
NVidia Pascal.
Fixes: 2f807c2324 ("modesetting: Add support for multi-plane pixmaps when page-flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
CRTCs and outputs needs to be enabled/disabled when the current
DPMS mode is changed. We also try to do it in an atomic commit
when possible.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
All the macros are available in the libdrm that we depend on.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The macro was available in libdrm for ages. Furthermore having a guard
like this is a very bad idea.
Building on an old server will result in a missing run-time functionality.
Since it's UABI one can use a local fallback, old kernels will return
-EINVAL and the fallback path will kick in.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With earlier commit the required version was bumped to 2.4.89, thus the
guards always evaluate to true.
Fixes: e4e3447603 ("Add RandR leases with modesetting driver support
[v6]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This reverts commit 8c455db0eb.
Since xf86platformBus.h is only included when XSERVER_PLATFORM_BUS is
defined, and configure.ac only defines that on systems with udev, this
commit breaks the build on non-udev systems like Solaris.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In order to flip between compressed and uncompressed buffers -
something drmModePageFlip explicitly bans us from doing - we need
to port use the atomic modesetting API. It's only 'fake' atomic
though given we still commit for each CRTC separately and
CRTC and connector properties are not set with the atomic API.
The helper functions to retrieve DRM properties have been borrowed
from Weston.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
glamor now supports depth 30, so allow use of it.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
XF86_PDEV_SERVER_FD is defined since:
commit 5fb641a29b
Author: Hans de Goede <hdegoede@redhat.com>
Date: Mon Jan 13 12:03:46 2014 +0100
hotplug: Extend OdevAttributes for server-managed fd support
ifdef'ing for it is a leftover from the external xf86-video-modesetting.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
../hw/xfree86/drivers/modesetting/driver.c: In function ‘redisplay_dirty’:
../hw/xfree86/drivers/modesetting/driver.c:586:20: warning: unused variable ‘ms’ [-Wunused-variable]
modesettingPtr ms = modesettingPTR(xf86ScreenToScrn(screen));
Move the variable ms into #ifdef GLAMOR_HAS_GBM, where it is used.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
UDL (usb) devices are blacklisted because of they weird behaviour when
it comes to vblank events. As EVDI uses very similar model of handling
vblanks it should be treated similarly.
When doing a page flip, EVDI does not wait for real vblank, but
simulates it by adding constant delay. It also does not support
DRM_IOCTL_WAIT_VBLANK.
In contrast to UDL, EVDI uses platform devices, thus instead of 'usb' in
path they all have 'platform'.
It is possible to blacklist by 'platform', so without explicitly saying
'evdi', but it might be misleading when it comes to real reason for it.
Signed-off-by: Dawid Kurek <dawid.kurek@displaylink.com>
This allows making the master screen's pixmap_dirty_list entries
explicitly reflect that we're now tracking the root window instead of
the screen pixmap, in order to allow Present page flipping on master
outputs while there are active slave outputs.
Define HAS_DIRTYTRACKING_DRAWABLE_SRC for drivers to check, but leave
HAS_DIRTYTRACKING_ROTATION defined as well to make things slightly
easier for drivers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
libdrm's busid matching for the legacy three-integer bus string format
simply ignores the domain number, rather than what we were doing here of
packing the domain into the bus number. Whatever, just use the existing
code to build a busid string, since that gets the domain right.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Mario Kleiner
Lukasz Spintzyk
Łukasz Spintzyk
Aaron Plattner
Kishore Kadiyala
Martin Peres
Uday Kiran Pichika
Dave Airlie
Alan Coopersmith
Michel Dänzer
Alex Goins
Kenneth Graunke
Adam Jackson
Emil Velikov
Maarten Lankhorst
Hans de Goede
Jim Qu
Keith Packard
Stefan Agner
Michel Dänzer
Louis-Francis Ratté-Boulianne
Jeffrey Smith
Rinat Ibragimov
Daniel Martin
Dawid Kurek