93ca526892
Split up memory for devices configured in the config file.
...
If we're using a continuous block here, we segfault when a device removal
triggers an xfree call.
2007-06-25 09:35:30 +09:30
b141b85c25
Check for identical grabs when adding a new passive grab. If an identical grab
...
exists, remove the old one and prepend the new one.
X.org Bug 2738 <https://bugs.freedesktop.org/show_bug.cgi?id=2738 >
2007-06-25 09:35:30 +09:30
19cde59c41
In fbFill() make sure the drawable is validated when pixman_fill() succeeds.
...
In fbSolidBoxClipped() don't return when pixman_fill() succeeds.
2007-06-22 00:39:28 -04:00
d2177c8091
Skip driver mode detection/configuration when !vtSema.
...
When the server is not active, make sure the driver functions related to
mode setting are not called.
2007-06-22 02:12:58 +01:00
e523859a95
Include module name in "already built-in" message
2007-06-20 17:54:38 -07:00
5138f710a1
Fixed fbSolidBoxClipped() to fill the right place.
...
Changed an X2 to a Y1.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
2007-06-20 16:46:22 -07:00
c9b79a3558
exaPolyFillRect: Don't track damage explicitly.
...
All callers should already do it.
Also don't leak pReg.
2007-06-20 18:56:06 +02:00
87966c5d28
exaGetImage: Don't migrate or try to accelerate for 1x1.
...
This is mainly to avoid wasting effort for XSync(), but just reading a single
pixel directly is probably faster than DownloadFromScreen anyway. Though in
light of the latter, even larger thresholds might be useful.
Also move the swappedOut check before the migration checks because migration
can't actually occur when swapped out.
2007-06-20 18:46:03 +02:00
40f27a2df4
mieqEnqueue: Make local queue tail variables unsigned.
...
So the modulo arithmetic actually works as intended... thanks to Peter Hutterer
for pointing out the problem.
2007-06-19 09:11:16 +02:00
ab7a6d860d
Merge branch 'master' of git+ssh://git.freedesktop.org/git/xorg/xserver into pci-rework
...
Conflicts:
hw/xfree86/os-support/bus/Pci.c
hw/xfree86/os-support/bus/linuxPci.c
2007-06-18 16:51:13 -07:00
2e7fef7d08
Make xf86{En,Dis}ableInterrupts no-ops on Linux.
2007-06-18 12:08:39 -04:00
831d3b7f8d
Compile fixes for Linux ARM platforms.
2007-06-18 12:05:55 -04:00
562ca3f2f9
In NewInputDeviceRequest, only call EnableDevice if xf86Screens[0]->vtSema is
...
true, preventing unwanted behavior in the case where a device is added while
the user is in a different VT.
2007-06-18 12:00:49 -04:00
42c2e14b25
swap xOrigin and yOrigin in SProcRenderSetPictureClipRectangles.
...
Fixes Xrender clipping rectangles when X server and client are of
different endianness, shown by xterm 225 among others.
2007-06-15 00:14:02 +02:00
78179ae827
Remove fbmmx.[ch] files
2007-06-11 22:46:42 -04:00
eb2d7fe02f
Replace fbFillmmx() with pixman_fill() and remove fbmmx.[ch]
2007-06-11 22:43:01 -04:00
f52ae237d3
Require pixman 0.9.2
2007-06-11 22:02:39 -04:00
d1d85c04e2
Delete fbBltmmx().
2007-06-11 21:25:42 -04:00
3f9adb18f1
Port a few forgotten fbSolidFillmmx()'es to fbFillmmx(). Use pixman_blt() instead of fbBltmmx()
...
in fbCopyNToN().
2007-06-11 15:19:27 -04:00
d06099b38e
Remove fbCopyAreammx() and fbSolidFillmmx()
2007-06-11 14:10:33 -04:00
d4a034370c
Split fbSolidFillmmx() into a new FbFillmmx() function. Call that from fbFill().
2007-06-11 14:10:33 -04:00
3210902a73
Split fbCopyAreammx() into a new fbBltmmx() function; call this
...
function from fbCopyNToN().
2007-06-11 14:10:33 -04:00
8d5f4368ea
Really make sure BUILD_TIME doesn't have a leading zero.
...
date +'%k%M%S' still gives a leading zero in the hour after midnight...
Add a leading 1 and remove it in xf86PrintBanner().
2007-06-11 16:53:38 +02:00
54e023cec0
Don't pass regions to pixman_image_composite() anymore.
2007-06-11 09:43:15 -04:00
5cbec267b6
Make sure BUILD_TIME doesn't have a leading zero.
...
It causes the compiler to treat it as an octal constant instead of decimal as
intended, which could even cause a build failure in the cases of 08 and 09.
Thanks to Clark Rawlins for pointing out the problem.
2007-06-11 12:38:41 +02:00
1aceec61ff
DRI: Clip cliprects obtained from DRIGetDrawableInfo to screen dimensions.
...
This is to avoid issues with redirected windows which are located partly or
fully outside of a screen edge, resulting in unusual cliprects which the 3D
drivers generally can't handle. The symptoms in such cases would be incorrect
rendering or even crashes or hangs.
2007-06-11 09:23:19 +02:00
5d896e43fd
DRITreeTraversal: Stop walking tree when we've seen all DRI windows.
2007-06-11 09:23:19 +02:00
0fb44c6f9a
DRI: Fix build warning.
2007-06-11 09:23:19 +02:00
644f7ddc0c
dixLookupClient: Use access parameter.
2007-06-11 09:23:18 +02:00
30a3297fed
mieq queue handling cleanups.
...
In particular, fix handling of wraparounds in mieqEnqueue.
2007-06-11 09:23:18 +02:00
c1a49a9269
GNU is wrong and ` is not left-quote.
2007-06-10 22:14:57 -04:00
67a0a4da1a
update xproto dependency to at least 7.0.9
2007-06-11 11:55:11 +10:00
c079cce9d8
Fix sync polarity on Samsung SyncMaster 205BW monitor.
...
need to use standard VESA sync polarity instead of the
EDID provided -hsync -vsync values.
2007-06-08 18:12:21 -07:00
9c47b86bd9
Add new fb symbols to wfbrename.h.
...
Avoids crashes when wfbComposite calls the wrong image_from_pict.
2007-06-07 13:57:12 -07:00
567b5bf765
Delete fbCompositeCopyAreammx()
2007-06-05 20:26:49 -04:00
49ed31c0b3
Remove most of the fast-path MMX operations from fbmmx. fbCopyAreammx
...
and fbSolidFillmmx are still needed by other code.
2007-06-05 17:48:33 -04:00
dfbe32b5b8
Remove the old Kerberos 5 authentication code.
...
Before you complain, this code hasn't seen material change since at least
X11R6. It certainly does not build with any modern version of Kerberos.
Anybody wanting krb5 auth to their X server should probably be using
GSSAPI instead of internal krb5 API anyway.
2007-06-04 18:07:00 -04:00
75dece08fb
xf86PostMotionEvents[P] calls xf86SendDragEvents, xf86SendDragEvents
...
unconditionally checks device->button->buttonsDown.
Let's make it possible to have a device with motion, but no buttons.
Without segfaulting.
2007-06-04 09:09:20 -04:00
fbb9b20395
Let's not do a calloc and a free on every call to xf86PostMotionEvents.
2007-06-04 06:59:42 -04:00
3f4295e643
Add xf86PostMotionEventP, takes a pointer instead of a variable number of
...
arguments.
Bump input ABI to 1.1 since we export this.
2007-06-04 06:48:06 -04:00
a4f3473c88
Fully init the AbsoluteClassRec in InitAbsoluteClassDeviceStruct.
...
(Specificly, we were missing the screen field.)
2007-06-04 06:39:02 -04:00
0cbc3a4da2
Print the build time as well as the date if we can.
2007-06-04 02:03:44 -04:00
9a7aaeb3f6
XFree86: Input: Assume core events per default
...
Assume that a device will be sending core events, unless explicitly
specified otherwise.
2007-06-03 18:38:53 +03:00
94361cbba7
XFree86: Input: Perform case-insensitive comparisons on option names
2007-06-03 18:38:42 +03:00
e5ce982381
Include pixman.h from fb.h or compile of some files will fail
...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2007-06-03 09:40:37 +10:00
90eb22656c
Minor cleanup/robustification to config parsing.
2007-06-02 16:49:26 -04:00
f6a983533b
Don't warn about default behaviour when autoconfigging.
2007-06-02 16:37:39 -04:00
21e8f4eb02
Don't print lack of DRI support as an error in AIGLX init.
2007-06-02 16:13:01 -04:00
0e1384d831
Delete VDIF support; it was never used anyway.
2007-06-02 16:07:20 -04:00
66702f3c1c
Need to use minPitch in miScanLineWidth() to get the shrinked
...
linePitch.
2007-06-01 23:55:40 -07:00
Peter Hutterer
Søren Sandmann Pedersen
Keith Packard
Alan Coopersmith
Arcady Goldmints-Orlov
Michel Dänzer
Ian Romanick
Adam Jackson
Lennart Buytenhek
Zephaniah E. Hull
Matthieu Herrb
Clark Rawlins
Dave Airlie
Daniel Ciocea
Aaron Plattner
Daniel Stone
Benjamin Herrenschmidt
Henry Zhao