When the "CTM" (color transform matrix) modesetting property is available,
create a corresponding RandR property.
To match the format of the property available in the amdgpu driver, expose it as
an array of 18 32-bit XA_INTEGERs representing a 3x3 matrix in row-major order,
where each entry is a S31.32 sign-magnitude fixed-point number with the
fractional part listed first.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: James Jones <jajones@nvidia.com>
If the kernel exposes GAMMA_LUT and GAMMA_LUT_SIZE properties and the size is
not what the server has pre-configured for the crtc, free the old gamma ramp
memory allocated by the server and replace it with new allocations of the
appropriate size.
In addition, when GAMMA_LUT is available, use drmModeCreatePropertyBlob() and
drmModeObjectSetProperty() to set the gamma ramp rather than using the legacy
drmModeCrtcSetGamma() function.
Add a new option "UseGammaLUT" to allow disabling this new behavior and falling
back to drmModeCrtcSetGamma() unconditionally.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Modeset properties can be set even when ms->atomic_modeset is disabled by using
the drmModeObjectSetProperty() function.
This will be necessary in a later change in order to set the GAMMA_LUT and CTM
properties.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
There was a time when setting a mode on a CRTC would not depend on the
associated connector's state. If a mode had been set successfully once,
it would mean it would work later on.
This changed with the introduction of new connectors type that now
require a link training sequence (DP, HDMI 2.0), and that means that
some events may have happened while the X server was not master that
would then prevent the mode from successfully be restored to its
previous state.
This patch relaxes the requirement that all modes should be restored on
EnterVT, or the entire X-Server would go down by allowing modesets to
fail (with some warnings). If a modeset fails, the CRTC will be
disabled, and a RandR event will be sent for the desktop environment to
fix the situation as well as possible.
Additional patches might be needed to make sure that the user would
never be left with all screens black in some scenarios.
v2 (Martin Peres):
- whitespace fixes
- remove the uevent handling (it is done in a previous patch)
- improve the commit message
- reduce the size of the patch by not changing lines needlessly
- return FALSE if one modeset fails in ignore mode
- add comments/todos to explain why we do things
- disable the CRTCs that failed the modeset
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Closes: #1010
Normally, we would receive a uevent coming from Linux's DRM subsystem,
which would trigger the check for disappearing/appearing resources.
However, this event is not received when X is not master (another VT
is selected), and so the userspace / desktop environment would not be
notified about the changes that happened while X wasn't master.
To fix the issue, this patch forces a refresh on EnterVT by splitting
the kms-checking code from the uevent handling into its own (exported)
function called drmmode_update_kms_state. This function is then called
from both the uevent-handling function, and on EnterVT right before
restoring the modes.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Tested-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
These changes have been ported from AMD GPU DDX driver.
This patch adds support for setting the CRTC variable refresh property
for suitable windows flipping via the Present extension.
In order for a window to be suitable for variable refresh it must have
the _VARIABLE_REFRESH property set by the MESA and inform Modesetting
DDX driver with window property updates.
Then the window must pass the checks required to be suitable for
Present extension flips - it must cover the entire X screen and no
other window may already be flipping. And also DRM connector should
be VRR capable.
With these conditions met every CRTC for the X screen will have their
variable refresh property set to true.
Kernel Changes to support this feature in I915 driver is under development.
Tested with DOTA2, Xonotic and custom GLX apps.
Signed-off-by: Uday Kiran Pichika <pichika.uday.kiran@intel.com>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Since the introduction of "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize" the fb_id isn't initialited at
drmmode_xf86crtc_resize.
Rotate operation of XRandR uses rotate_bo. So in this case the fb_id
associated to the front_bo is not initialized at drmmode_set_mode_major.
So fd_id remains 0.
As every call to drmmode_xf86crtc_resize allocates a new front_bo we should
destroy unconditionally the old_front_bo if operation success. So we free
the allocated GBM handles.
This avoids crashing xserver with a OOM in the RPI4 1Gb at 4k resolution
after 3 series xrandr rotations from normal to left and vice versa reported at
https://github.com/raspberrypi/firmware/issues/1345
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1024
Fixes: 8774532121 "modesetting: Remove unnecessary fb addition from
drmmode_xf86crtc_resize"
EDID1.4 replaced GTF Bit with Continuous or Non-Continuous Frequency Display.
Check the "Display Range Limits Descriptor" for GTF support.
If panel doesn't support GTF, then add gtf modes.
Otherwise X will only show the modes in "Detailed Timing Descriptor".
V2: Coding style changes.
V3: Coding style changes, remove unused variate.
V4: remove unused variate.
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/313
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Resulted in a build failure with -Werror:
../hw/xfree86/drivers/modesetting/drmmode_display.c: In function ‘drmmode_crtc_set_mode’:
../hw/xfree86/drivers/modesetting/drmmode_display.c:759:15: error: unused variable ‘screen’ [-Werror=unused-variable]
759 | ScreenPtr screen = crtc->scrn->pScreen;
| ^~~~~~
Fixes: c66c548eab "modesetting: Call glamor_finish from
drmmode_crtc_set_mode"
Reviewed-by: Adam Jackson <ajax@redhat.com>
I introduced this error with the MST hotplug code, but it can trigger
on zaphod setups, and is perfectly fine. There is no support for
MST/hotplug on zaphod setups currently, so we can just skip over
the dynamic connector handling here. However we shouldn't skip
over the lease handling so move it into the codepath.
Fixes: 9257b1252d ("modesetting: add dynamic connector hotplug support (MST) (v3)")
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For the miClearDrawable prototype. Apparently it doesn't get pulled in
for some build configurations, breaking the build.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Calling rrGetScrPriv when RandR isn't initialized causes an assertion
failure that aborts the server:
Xorg: ../include/privates.h:121: dixGetPrivateAddr: Assertion `key->initialized' failed.
Thread 1 "Xorg" received signal SIGABRT, Aborted.
0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
(gdb) bt
#0 0x00007ffff78a8f25 in raise () from /usr/lib/libc.so.6
#1 0x00007ffff7892897 in abort () from /usr/lib/libc.so.6
#2 0x00007ffff7892767 in __assert_fail_base.cold () from /usr/lib/libc.so.6
#3 0x00007ffff78a1526 in __assert_fail () from /usr/lib/libc.so.6
#4 0x00007ffff7fb57c1 in dixGetPrivateAddr (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:121
#5 0x00007ffff7fb5822 in dixGetPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:136
#6 0x00007ffff7fb586a in dixLookupPrivate (privates=0x555555ab1b60, key=0x555555855720 <rrPrivKeyRec>) at ../include/privates.h:166
#7 0x00007ffff7fb8445 in CreateScreenResources (pScreen=0x555555ab1790) at ../hw/xfree86/drivers/modesetting/driver.c:1335
#8 0x000055555576c5e4 in xf86CrtcCreateScreenResources (screen=0x555555ab1790) at ../hw/xfree86/modes/xf86Crtc.c:744
#9 0x00005555555d8bb6 in dix_main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/main.c:214
#10 0x00005555557a4f0b in main (argc=4, argv=0x7fffffffead8, envp=0x7fffffffeb00) at ../dix/stubmain.c:34
This can happen, for example, if the server is configured with Xinerama
and there is more than one X screen:
Section "ServerLayout"
Identifier "crash"
Screen 0 "modesetting"
Screen 1 "dummy" RightOf "modesetting"
Option "Xinerama"
EndSection
Section "Device"
Identifier "modesetting"
Driver "modesetting"
EndSection
Section "Screen"
Identifier "modesetting"
Device "modesetting"
EndSection
Section "Device"
Identifier "dummy"
Driver "dummy"
EndSection
Section "Screen"
Identifier "dummy"
Device "dummy"
EndSection
The problem does not reproduce if there is only one X screen because of
this code in xf86RandR12Init:
#ifdef PANORAMIX
/* XXX disable RandR when using Xinerama */
if (!noPanoramiXExtension) {
if (xf86NumScreens == 1)
noPanoramiXExtension = TRUE;
else
return TRUE;
}
#endif
Fix the problem by checking dixPrivateKeyRegistered(rrPrivKey) before
calling rrGetScrPriv. This is similar to what the xf86-video-amdgpu
driver does:
fd66f5c0be/src/amdgpu_kms.c (L388)
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This makes sure any pending drawing to a new scanout buffer will be
visible from the start.
This makes the finish call in drmmode_copy_fb superfluous, so remove it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Now that we've fixed LoaderSymbolFromModule this should work properly.
This reverts commit 5c7c6d5cff.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Populate outout possible_crtcs as the union of possible_crtcs from
the encoders rather than the intersection. Otherwise we're easily left
with possible_crtcs==0 when all the possible encoders have
non-overlapping possible_crtcs.
No idea what the magic 0x7f is about, but keep it around in case
it matters.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Currently we parse through xf86Info.debug to check if we the modifiers
should be disabled. Handle that within DDX and pass GLAMOR_NO_MODIFIERS
into the glamor_init() flags.
This allows individual DDX control over the setting - say when modifiers
are woking OK with one implementation and not the other.
Most importantly, this removes the final xf86 piece from the codebase.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Dynamically added outputs should have their properties
properly updated as well. Otherwise we're left with an output
with many of its propeties not exposed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
The miPointerSpriteFunc swcursor code expects there to only be a single
framebuffer and when the cursor moves it will undo the damage of the
previous draw, potentially overwriting what ever is there in a new
framebuffer installed after a flip.
This leads to all kind of artifacts, so we need to disable pageflipping
when a swcursor is used.
The code for this has shamelessly been copied from the xf86-video-amdgpu
code.
Fixes: https://gitlab.freedesktop.org/xorg/xserver/issues/828
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix the following compiler warning:
drmmode_display.c: In function ‘drmmode_create_bo’:
drmmode_display.c:1019:9: warning: ISO C90 forbids mixed declarations and code [
1019 | uint32_t num_modifiers;
| ^~~~~~~~
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Noticed when porting this logic to xf86-video-nouveau, and valgrind
complained about conditional jump based on uninitialized data.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Believe it or not, somehow we've never done this in legacy mode! We
currently simply change the DPMS property on the CRTC's output's
respective DRM connector, but this means that we're just setting the
CRTC as inactive-not disabled. From the perspective of the kernel, this
means that any shared resources used by the CRTC are still in use.
This can cause problems for drivers that are not yet fully atomic,
despite using the atomic helpers internally. For instance: if CRTC-1 and
CRTC-2 are still enabled and use shared resources within the kernel (an
MST topology, for example), and then userspace tries to go enable CRTC-3
on the same topology this might suddenly fail if CRTC-3 needs the shared
resources CRTC-1 and CRTC-2 are using. While I don't know of any
situations in the mainline kernel that actually trigger this, future
plans for reworking the atomic check of MST drivers are absolutely
going to make this into a real issue (they already are in my WIP
branches for the kernel).
So: actually do the right thing here and disable CRTCs when they're not
going to be used anymore, even in legacy mode.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Instead of having every video driver loop over any pending leases to
free them during CloseScreen, do this up in the DIX layer by
terminating leases when a leased CRTC or Output is destroyed and
(just to make sure), also terminating leases in RRCloseScreen. The
latter should "never" get invoked as any lease should be associated
with a resource which was destroyed.
This is required as by the time the driver's CloseScreen function is
invoked, we've already freed all of the DIX randr structures and no
longer have any way to reference the leases
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=106960
Cc: Thomas Hellstrom <thellstrom@vmware.com>
The recent rewrite of modesetting driver broke the 24bpp support.
As typically found on cirrus KMS, it leads to a blank screen, spewing
the error like:
failed to add fb -22
(EE) modeset(0): failed to set mode: Invalid argument
The culript is that the wrong bpp value of the front buffer is passed
to drmModeAddFB(). Fix it by replacing with the back buffer bpp,
drmmode->kbpp.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Stefan Dirsch <sndirsch@suse.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If we're using atomic modesetting, then we're also using universal
planes, and so the lease we create needs to include the plane.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
So, this did actually work on older kernels at one point in time,
however it seems that this working was a result of some of the Linux
kernel's atomic modesetting helpers not preserving the CRTC's enabled
state in the right spots. This was fixed in:
846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2")
As a result, atomic commits which simply disassociate a DRM connector
with it's CRTC while leaving the CRTC in an enabled state aren't enough
to disable the CRTC, and result in the atomic commit failing. This
currently can cause issues with MST hotplugging where X will end up
failing to disable the MST outputs after they've left the system. A
simple reproducer:
- Start up Xorg
- Connect an MST hub with displays connected to it
- Remove the hub
- Now there should be CRTCs stuck on the orphaned MST connectors, and X
won't be able to reclaim them.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
drmmode_shadow_allocate() still uses drmModeAddFB() which may fail if
the format is not as expected, preventing from using a rotated output.
Change it to use the new function drmmode_bo_import() which takes care
of calling the drmModeAddFB2() API.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106715
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Tomas Pelka <tpelka@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Use the DRM_CAP_ADDFB2_MODIFIERS query to make sure the kms
driver supports modifiers in the addfb2 ioctl, and fall back
to addfb ioctl without modifiers if modifiers are unsupported.
E.g., as of Linux 4.17, nouveau-kms so far does not suppport
modifiers and gets angry if drmModeAddFB2WithModifiers() is
called (-> failure to set a video mode -> blank screen), but
Mesa's nvc0+ gallium driver causes gbm_bo_get_modifier() to
return a valid modifier by translating the default tiling of
bo's created via gbm_bo_create() into a modifier other than
DRM_FORMAT_MOD_INVALID (see Mesa's nvc0_miptree_get_modifier()).
Testing for != DRM_FORMAT_MOD_INVALID is apparently not
sufficient for safe use of drmModeAddFB2WithModifiers.
Bonus: Handle potential failure of populate_format_modifiers().
The required DRM_CAP is defined since libdrm v2.4.65, and we
require v2.4.89+ for the server, so we can use it unconditionally.
Tested on intel-kms, radeon-kms, nouveau-kms. Fixes failure on
NVidia Pascal.
Fixes: 2f807c2324 ("modesetting: Add support for multi-plane pixmaps when page-flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
We would fail to get the FB ID if it wasn't already imported, since we
were checking to see if the pointer was NULL (it never was) rather than
if the content of the pointer was 0.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
drmmode_crtc_set_mode has a loop nested inside another loop, where both
of them were using 'i' as the loop iterator. Rename it to avoid an
infinite loop.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Non-atomic kms drivers like radeon-kms (or nouveau-kms with
default setting of "atomic ioctl disabled") don't export
any formats, so num_formats == 0.
Some atomic drivers (nouveau-kms with boot param nouveau.atomic=1,
or intel-kms on, e.g., Linux 4.13) expose num_formats == 0, or
don't expose any modifiers, so num_modifiers == 0.
Let the drmmode_is_format_supported() check pass in these cases
to allow page flipping, as it works just fine.
Tested on NV-96 for nouveau, HD-5770 for radeon, Intel Ivybridge
with Linux 4.13 and drm-next to fix page flipping.
Fixes: 9d147305b4 ("modesetting: Check if buffer format is supported when flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We need to make sure that the atomic commit are consistent
or else the kernel will reject it. For example, when moving
a CRTC from one output to another one, the first output CRTC_ID
property needs to be reset. Also if the second output was using
another CRTC beforehands, it needs to be disabled to avoid an
inconsistent state.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
CRTCs and outputs needs to be enabled/disabled when the current
DPMS mode is changed. We also try to do it in an atomic commit
when possible.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of whether or not we fed modifiers into GBM when we allocated
a BO. We'll use this later inside Glamor, to reallocate buffer storage
if we allocate buffer storage using modifiers, and a non-modifier-aware
client requests an export of that pixmap.
This makes it possible to run a compositing manager on an old GLX/EGL
stack on top of an X server which allocates internal buffer storage
using exotic modifiers from modifier-aware GBM/EGL/KMS.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Aaron Plattner
Kishore Kadiyala
Martin Peres
Uday Kiran Pichika
Dave Airlie
Alan Coopersmith
Jose Maria Casanova Crespo
Aaron Ma
Yuriy Vasilev
Michel Dänzer
Adam Jackson
Ville Syrjälä
Keith Packard
Emil Velikov
Hans de Goede
Ilia Mirkin
Lyude Paul
Takashi Iwai
Olivier Fourdan
Mario Kleiner
Matt Turner
Daniel Stone
Louis-Francis Ratté-Boulianne