Right now, extensions that need to be called after the CreateScreenResources
proc had been run, must wrap the screen proc vector directly (all of them
forming kind of daisy chain), and so - when called - temporarily restore the
previous one, call it, wrap again, and if the call was successful finally
doing it's own stuff. (same is done for many other procs)
While that approach is looking nice and elegant on the drawing board, it's
complicated, dangerous like a chainsaw and makes debugging hard, leading to
pretty blurred API borders.
Instead introducing a simple approach for letting extension hook into a
post-CreateScreenResources callback list safely, w/o having to care much
about side effects with the call chain. Extensions now can simply register
their business logic and get called back - w/o ever having to mess with the
ScreenRec's internal structures.
Note that these hooks are executed *AFTER* the original CreateScreenResources()
proc had been called SUCCESSFULLY (returned TRUE), so callees can rely on
the DDX/driver had already done it's job.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Right now, extension specific actions on screen closing implemented by wrapping
the ScreenRec's PositionWindow() proc pointer: the extensions are storing the
original pointer in their private data and putting in their own one. On each
call, their proc restores the original one, calls it, and switches back again.
When multiple extensions doing so, they're forming a kind of daisy chain.
(the same is done for lots of other procs)
While that approach is looking nice and elegant on the drawing board, it's
complicated, dangerous like a chainsaw and makes debugging hard, leading to
pretty blurred API borders.
This commit introduces a simple approach for letting extension hook into the
screen closing path safely, w/o having to care much about side effects with
the call chain. Extensions now can simply register their hook proc (and an
opaque pointer) and get called back - w/o ever having to mess with the
ScreenRec's internal structures. These hooks are called before the original
vector (usually handled by DDX/screen driver directly) is called.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Safer (and easier to understand) if we look at the result pointer
instead of the counter for testing whether device wasn't found.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Doing so that struct OdevAttributes doesn't need to be exposed to
drivers anymore. It really doesn't seem to be a hot path, so not
inlining anymore shouldn't have any practical performance impact.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1360>
The xnfreallocarray was added along (and just as an alias to) XNFreallocarray
back a decade ago. It's just used in a few places and it's only saves us from
passing the first parameter (NULL), so the actual benefit isn't really huge.
No (known) driver is using it, so the macro can be dropped entirely.
Fixes: ae75d50395
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1529>
It's cleaner to have public headers only holding public stuff and
xf86_os_support seems to be much more appropriate place for this.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1456>
These aren't used by any drivers/modules, just DDX'es, so no need to export.
Note: tigervnc does use it, but it has it's own DDX, therefore directly
linked in, just like the in-tree DDX'es which doesn't need exporting.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1349>
Add a workaround to accept devices of the kernel's ofdrm driver.
Makes Xorg work on Open Firmware's pre-configured display with the
DRM graphics stack.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
The current X server infrastructure sets modesetting driver as default driver
to handle PCI-hotplug of a GPU device. This prevents the respective DDX driver
(like AMDGPU DDX driver) to take control of the card.
This patch:
- Adds a few functions and fine-tunes the GPU hotplug infrastructure to allow
the DDX driver to be loaded, if it is configured in the X config file
options as "hotplug-driver".
- Scans and updates the PCI device list before adding the new GPU device
in platform, so that the association of the platform device and PCI device
is in place (dev->pdev).
- Adds documentation of this new option
An example usage in the config file would look like:
Section "OutputClass"
Identifier "AMDgpu"
MatchDriver "amdgpu"
Driver "amdgpu"
HotplugDriver "amdgpu"
EndSection
V2:
Fixed typo in commit message (Martin)
Added R-B from Adam.
Added ACK from Alex and Martin.
V3:
Added an output class based approach for finding the DDX driver (Aaron)
Rebase
V4:
Addressed review comment from Aaron:
GPU hot-plug handling driver's name to be read from the DDX config file options.
In this way only the DDX drivers interested in handling GPU hot-plug will be
picked and loaded, for others modesetting driver will be used as usual.
V5:
Addressed review comments from Aaron:
- X config option to be listed in CamelCase.
- Indentation fix at one place.
- Code readability related optimization.
V6:
Addressed review comments from Aaron:
- Squash the doc in the same patch
- Doc formatting changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Aaron Plattner aplattner@nvidia.com (v3)
Acked-by: Martin Roukala martin.roukala@mupuf.org(v1)
Acked-by: Alex Deucher alexander.deucher@amd.com (v1)
Reviewed-by: Adam Jackson ajax@redhat.com(v1)
Signed-off-by: Shashank Sharma shashank.sharma@amd.com
Put in a workaround to accept devices of the kernel's hyperv_drm
driver. Makes Xorg work on HyperV Gen 1/2 with the DRM graphics
stack.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
SimpleDRM 'devices' are a fallback device, and do not have a busid
so they are getting skipped. This will allow simpledrm to work
with the modesetting driver
If there is an explicit configuration, assign the RandR provider
of the GPUDevice to the screen it was specified for.
If there is no configuration (default case) the screen number is
still 0 so it doesn't change behaviour.
The result is e.g:
# DISPLAY=:0.2 xrandr --listproviders
Providers: number : 2
Provider 0: id: 0xd2 cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 0 name:modesetting
Provider 1: id: 0xfd cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 2 outputs: 2 associated providers: 0 name:Intel
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
xf86_platform_devices[i].pdev may be NULL in cases we fail to parse the
busid in config_udev_odev_setup_attribs() (see also [1], [2]) such as
when udev does not give use ID_PATH. This in turn leads to
platform_find_pci_info() being not called and pdev being NULL.
[1]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/993
[2]: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1076
Reviewed-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
xf86platformProbeDev didn't check the device path, fix it.
This is a problem when trying to set up a non-PCI device via
explicit xorg.conf.d configuration.
An USB DisplayLink device, being non-PCI was always set up
as a GPU device assigned to screen 0 instead of a regular
framebuffer, potentially having its own dedicated screen,
despite such configuration as below. Only the relevant parts
of the configuration are quoted, it's part of a larger context
with an Intel chip that has 3 outputs:
* DP1 connected to an LCD panel,
* VGA1 connected to an external monitor,
* HDMI1 unconnected and having no user visible connector
Section "ServerFlags"
Option "AutoBindGPU" "false"
EndSection
...
Section "Device"
Identifier "Intel2"
Driver "intel"
BusID "PCI:0:2:0"
Screen 2
Option "Monitor-HDMI1" "HDMI1"
Option "ZaphodHeads" "HDMI1"
EndSection
Section "Device"
Identifier "UDL"
Driver "modesetting"
Option "kmsdev" "/dev/dri/card0"
#BusID "usb:0:1.2:1.0"
Option "Monitor-DVI-I-1" "DVI-I-1"
Option "ShadowFB" "on"
Option "DoubleShadow" "on"
EndSection
...
Section "Screen"
Identifier "SCREEN2"
Option "AutoServerLayout" "on"
Device "UDL"
GPUDevice "Intel2"
Monitor "Monitor-DVI-I-1"
SubSection "Display"
Modes "1024x768"
Depth 24
EndSubSection
EndSection
Section "ServerLayout"
Identifier "LAYOUT"
Option "AutoServerLayout" "on"
Screen 0 "SCREEN"
Screen 1 "SCREEN1" RightOf "SCREEN"
Screen 2 "SCREEN2" RightOf "SCREEN1"
EndSection
On the particular machine I was trying to set up an UDL device,
I found the following structure was being used to match
the device to a platform device while I was debugging the issue:
xf86_platform_devices[0] == Intel, /dev/dri/card1, primary platform device
xf86_platform_devices[1] == UDL, /dev/dri/card0
devList[0] == "Intel0", ZaphodHeads: DP1
devList[1] == "Intel1", ZaphodHeads: VGA1
devList[2] == "UDL"
devList[3] == "Intel2", ZaphodHeads: HDMI1 (intended GPU device to UDL)
When xf86platformProbeDev() matched the UDL device, the BusID
check failed in both cases of:
* BusID "usb:0:1.2:1.0" was specified
* Option "kmsdev" "/dev/dri/card0" was specified
As a result, xf86platformProbeDev() went on to call probeSingleDevice()
with xf86_platform_devices[0] and devList[2], resulting in the
UDL device being set up as a GPU device assigned to the first screen
instead of as a framebuffer on the third screen as the configuration
specified.
Checking Option "kmsdev" in code code may be a layering violation.
But the modesetting driver is actually part of the Xorg sources
instead of being an external driver, so he "kmsdev" path knowledge
may be used here.
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
This is a modified version of a patch we've been carry-ing in Fedora and
RHEL for years now. This patch automatically adds secondary GPUs to the
master as output sink / offload source making e.g. the use of
slave-outputs just work, with requiring the user to manually run
"xrandr --setprovideroutputsource" before he can hookup an external
monitor to his hybrid graphics laptop.
There is one problem with this patch, which is why it was not upstreamed
before. What to do when a secondary GPU gets detected really is a policy
decission (e.g. one may want to autobind PCI GPUs but not USB ones) and
as such should be under control of the Desktop Environment.
Unconditionally adding autobinding support to the xserver will result
in races between the DE dealing with the hotplug of a secondary GPU
and the server itself dealing with it.
However we've waited for years for any Desktop Environments to actually
start doing some sort of autoconfiguration of secondary GPUs and there
is still not a single DE dealing with this, so I believe that it is
time to upstream this now.
To avoid potential future problems if any DEs get support for doing
secondary GPU configuration themselves, the new autobind functionality
is made optional. Since no DEs currently support doing this themselves it
is enabled by default. When DEs grow support for doing this themselves
they can disable the servers autobinding through the servers cmdline or a
xorg.conf snippet.
Signed-off-by: Dave Airlie <airlied@gmail.com>
[hdegoede@redhat.com: Make configurable, fix with nvidia, submit upstream]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
---
Changes in v2:
-Make the default enabled instead of installing a xorg.conf
snippet which enables it unconditionally
Changes in v3:
-Handle GPUScreen autoconfig in randr/rrprovider.c, looking at
rrScrPriv->provider, rather then in hw/xfree86/modes/xf86Crtc.c
looking at xf86CrtcConfig->provider. This fixes the autoconfig not
working with the nvidia binary driver
Some Broadcom set-top-box boards have PCI busses, but the GPU is still
probed through DT. We would dereference a null busid here in that
case.
Signed-off-by: Eric Anholt <eric@anholt.net>
Commits b5dffbb and d75ffcd introduce code in xf86platformProbe() that
references a member of xf86configptr. However, when using the
"-configure" option, xf86configptr may not be initialized when
xf86platformProbe() is called.
Avoid referencing a member of xf86configptr if uninitialized.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100405
Signed-off-by: Jeff Smith <whydoubt@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
v2: Re-commit the patch reverted in
2388f5e583, with Aaron Plattner's
fix squashed in (by anholt).
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v1)
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Eric Anholt <eric@anholt.net>
This reverts commit 112d0d7d01.
It broke Xorg for Adam, Peter, and myself, by failing hard when a
module load failed.
Signed-off-by: Eric Anholt <eric@anholt.net>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Allow OutputClass config snippets to modify the module-path.
Note that any specified ModulePaths will be pre-pended to the normal
ModulePath. The idea behind this is that any output hardware specific
modules should have preference over the normal modules.
One use-case for this is the nvidia binary driver, this allows a
config snippet like this:
Section "OutputClass"
MatchDriver "nvidia"
Modulepath "/usr/lib64/nvidia/modules"
EndSection
To get the nvidia glx specific glx module loaded, but only when the
nvidia kernel driver is loaded.
Together with the glvnd work done recently, this allows the nouveau
+ mesa and nvidia-binary userspace stacks to co-exist on the same
system without any ldconfig / xorg.conf tweaking and the xserver will
automatically do the right thing depending on which kernel driver
(nouveau or nvidia) is loaded.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Allow using:
Option "PrimaryGPU" "yes"
In an OutputClass section to override the default primary GPU device
selection which selects the GPU used as output by the firmware.
If multiple output devices match an OutputClass section with
the PrimaryGPU option set, the first one enumerated becomes the
primary GPU.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for allowing an OutputClass section to
override the default primary GPU device selection.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for setting options in OutputClass Sections and having these
applied to any matching output devices.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make OutputClassMatches directly take a xf86_platform_device as argument,
rather then an index into xf86_platform_devices. This makes things
easier for callers which already have a xf86_platform_device pointer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
xf86MatchDevice returns a dynamically allocated list of GDevPtr-s,
free this when we're done with it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If we did not find any non GPU Screens, try again ignoring the notion
of any video devices being the primary device. This fixes Xorg exiting
with a "no screens found" error when using virtio-vga in a
virtual-machine and when using a device driven by simpledrm.
This is a somewhat ugly solution, but it is the best I can come up with
without major surgery to the bus and probe code.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is primarily a preparation patch for fixing the xserver exiting with
a "no screens found" error even though there are supported video cards,
due to the server not recognizing any card as the primary card.
This also fixes the (mostly theoretical) case of a platformBus capable
driver adding a device as GPUscreen before a driver which only supports
the old PCI probe method gets a chance to claim it as a normal screen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This fix is for the following xorg.conf can work:
Section "ServerFlags"
Option "AutoAddGPU" "off"
EndSection
Section "Device"
Identifier "Amd"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Intel"
Driver "modesetting"
BusID "pci:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Intel"
GPUDevice "Amd"
EndSection
Without AutoAddGPU off, modesetting DDX will also be loaded
for GPUDevice.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new platform bus code and the old PCI bus code overlap. Platform bus
can handle any type of device, including PCI devices, whereas the PCI code
can only handle PCI devices. Some drivers only support the old style
PCI-probe methods, but the primary device detection code is server based,
not driver based; so we might end up with a primary device which only has
a PCI bus-capable driver, but was detected as primary by the platform
code, or the other way around.
(The above paragraph was shamelessly stolen from Hans de Goede, and
customized.)
The latter case applies to QEMU's virtio-gpu-pci device: it is detected as
a BUS_PCI primary device, but we actually probe it first (with the
modesetting driver) through xf86platformProbeDev(). The
xf86IsPrimaryPlatform() function doesn't recognize the device as primary
(it bails out as soon as it sees BUS_PCI); instead, we add the device as a
secondary graphics card under "autoAddGPU". In turn, the success of this
automatic probing-as-GPU prevents xf86CallDriverProbe() from proceeding to
the PCI probing.
The result is that the server exits with no primary devices detected.
Commit cf66471353 ("xfree86: use udev to provide device enumeration for
kms devices (v10)") added "cross-bus" matching to xf86IsPrimaryPci(). Port
that now to xf86IsPrimaryPlatform(), so that we can probe virtio-gpu-pci
as a primary card in platform bus code.
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-By: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
At startup the server wasn't adding devices, but nothing
was blocking hotplug devices by the look of it.
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91388
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
xf86platformProbeDev creates GPU screens for any platform devices that were not
matched by a GDev in the loop above, but only if there was at least one device.
This means that it's impossible to configure a device as a GPU screen if there
is only one platform device that matches that driver.
Instead, create a GPU screen (if possible) for any platform device that was not
claimed by the GDev loop.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
If a PCI entity is found, xf86_check_platform_slot performs a device ID check
against the xf86_platform_device passed in. However, it just returns
immediately without checking the rest of the entities first. This leads to this
situation happening:
1. The nvidia driver creates an entity 0 with bus.type == BUS_PCI
2. The intel driver creates entity 1 for its platform device, opening
/dev/dri/card0
3. xf86platformProbeDev calls probeSingleDevice on the Intel platform device,
which calls doPlatformProbe, which calls xf86_check_platform_slot.
4. xf86_check_platform_slot compares the Intel platform device against the
NVIDIA PCI entity. Since they don't have the same device ID, it returns
TRUE.
5. doPlatformProbe calls xf86ClaimPlatformSlot, which creates a duplicate entity
for the Intel one.
Fix this by only returning FALSE if the PCI ID matches, and continuing the loop
otherwise. In the scenario above, this allows it to continue on to find the
Intel platform device that matches the second entity.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
On platforms that don't support PCI or have no GPU attached to the PCI
bus, there can still be a primary device on a non-PCI bus.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When neither of the various bus implementations was able to find a
primary bus and device, fallback to using the platform bus as primary
bus and the first platform device as primary device.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When systemd isn't being used, systemd_logind_release_fd is defined
as an empty macro, leaving the arguments unused. Fix the compiler
warnings by simply removing the local variables and referencing the
structure within the macro call.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
OdevAttributes are a fixed set of values with known types; instead of
storing them in a linked list and requiring accessor/settor functions,
replace the list header, struct OdevAttributes, with a struct that
directly contains the values. This provides for compile-time
typechecking of the values, eliminates a significant amount of code
and generally simplifies using this datatype.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Use the OutputClass configuration to determine what drivers to autoload
for a given device.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Tested-By: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Most of the driver enumeration functions take an array and a maximum
number of entries that they are allowed to fill in. Upon success, they
return the number of entries filled in. This allows them to be easily
used to consecutively.
One exception is the xf86MatchDriverFromFiles() function, which doesn't
return a value, so callers have to manually search the array for the
first empty entry.
This commit modifies the xf86MatchDriverFromFiles() to behave the same
way as others, which makes it easier to deal with.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Tested-By: Aaron Plattner <aplattner@nvidia.com>
Tested-by: Rob Clark <robdclark@gmail.com> (on arm / platform device)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We can only request one fd per device from systemd-logind. If a fd is re-used
by the same device, releasing the fd from one device doesn't mean we can close
it. The systemd code knows when it's really released, so let it close the fd.
Test case: xorg.conf section for an input device with hotplugging enabled.
evdev detects the duplicate and closes the hotplugged device, which closes the
fd. The other instance of evdev thinks the fd is still valid so now you're
playing a double lottery. First, which client(s) will get the evdev fd?
Second, which requests will be picked up by evdev and which ones will be
picked up by the client? You'll never know, but the fun is in finding out.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This makes how we handle video drivers identical to what we do for input
drivers, and this should make live easier for old non kms drivers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
And use it from xf86platformAddDevice too, instead of directly calling
drvp->platformProbe.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Enrico Weigelt, metux IT consult
Thomas Zimmermann
Jeremy Huddleston Sequoia
Shashank Sharma
nerdopolis
Zoltán Böszörményi
Povilas Kanapickas
Alan Coopersmith
Dave Airlie
Eric Anholt
Jeff Smith
Karol Kosik
Hans De Goede
Qiang Yu
Laszlo Ersek
Dave Airlie
Aaron Plattner
Peter Hutterer
Thierry Reding
Keith Packard