Right now, Xorg does not install DBus matches for "PauseDevice" /
"ResumeDevice". Therefore, it should usually not receive those DBus
signals from logind. It is just a coincidence that systemd-logind sends
those signals in a directed manner right now. Therefore, dbus-daemon
bypasses the broadcast matches.
However, this is not ABI and Xorg should not rely on this. systemd-logind
is free to send those signals as broadcasts, in which case Xorg will
freeze the VT. Fix this by always installing those matches.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Reported-by: Jan Alexander Steffens <jan.steffens@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit fixes a small mistake in Xorg.wrap.1 .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
X11Controller.m:417:17: error: address of function 'asl_log_descriptor' will always evaluate to 'true'
[-Werror,-Wpointer-bool-conversion,Value Conversion Issue]
if (asl_log_descriptor) {
~~ ^~~~~~~~~~~~~~~~~~
X11Controller.m:417:17: note: prefix with the address-of operator to silence this warning [Semantic Issue]
if (asl_log_descriptor) {
^
&
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
systemd-logind integration does not work when starting X on a new tty, as
that detaches X from the current session and after hat systemd-logind revokes
all rights any already open fds and refuses to open new fds for X.
This means that currently e.g. "startx -- vt7" breaks, and breaks badly,
requiring ssh access to the system to kill X.
The fix for this is easy, we must not use systemd-logind integration when
not using KeepTty, or iow we may only use systemd-logind integration together
with KeepTty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
linux_parse_vt_settings() was split out of xf86OpenConsole so that it can
be called earlier during systemd-logind init, but it is possible to run
the xserver in such a way that xf86OpenConsole() is never used.
The FatalError calls in linux_parse_vt_settings() may stop the Xorg xserver
from working when e.g. no /dev/tty0 is present in such a setup.
This commit adds a may_fail parameter to linux_parse_vt_settings() which
can be used to make linux_parse_vt_settings() fail silenty with an error
return in this case, rather then calling FatalError().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
systemd-logind integration does not work when starting X on a new tty, as
that detaches X from the current session and after hat systemd-logind revokes
all rights on any already open fds and refuses to open new fds for X.
This means that currently e.g. "startx -- vt7" breaks, and breaks badly,
requiring ssh access to the system to kill X.
The fix for this is easy, we must not use systemd-logind integration when
not using KeepTty, or iow we may only use systemd-logind integration together
with KeepTty.
But the final KeepTty value is not known until the code to chose which vtno to
run on has been called, which currently happens after intializing
systemd-logind.
This commit is step 1 in fixing the "startx -- vt7" breakage, it factors out
the linux xf86OpenConsole bits which set xf86Info.vtno and keepTty so that
these can be called earlier. Calling this earlier is safe as this code has
no side effects other than setting xf86Info.vtno and keepTty.
Note this basically only moves a large chunk of xf86OpenConsole() into
linux_parse_vt_settings() without changing a single line of it, this is
hard to see in the diff because the identation level has changed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In some extreme cases with animated cursors at a high frame rate we
could end up filling the wl_display outgoing buffer and end up with
wl_display_flush() failing.
In any case, using the frame callback to throttle ourselves is the
right thing to do.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Right now if "-auth" isn't passed on the command line, we let
any user on the system connect to the Xwayland server.
That's clearly suboptimal, given Xwayland is generally designed
to be used by one user at a time.
This commit changes the behavior, so only the user who started the
X server can connect clients to it.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xwayland currently allows wide-open access to the X sockets
it listens on, ignoring Xauth access control.
This commit makes sure to enable access control on the sockets,
so one user can't snoop on another user's X-over-wayland
applications.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If present, access the unaccelerated valuator mask values for DGA and XI2 raw
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Allows a mask to carry both accelerated and unaccelerated motion at the same
time.
This is required for xf86-input-libinput where the pointer acceleration
happens in libinput already, but parts of the server, specifically raw events
and DGA rely on device-specific unaccelerated data.
To ease integration add this as a second set to the ValuatorMask rather than
extending all APIs to carry a second, possibly NULL set of valuators.
Note that a valuator mask should only be used in either accel/unaccel or
standard mode at any time. Switching requires either a valuator_mask_zero()
call or unsetting all valuators one-by-one. Trying to mix the two will produce
a warning.
The server has a shortcut for changing a mask with the
valuator_mask_drop_unaccelerated() call. This saves us from having to loop
through all valuators on every event, we can just drop the bits we know we
don't want.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The image is created in the native byte order of the machine Xephyr is
rendered on however drawn in the image byte order of the Xephyr server.
Correct byte order in the xcb_image_t structure and convert to native
before updating the window.
If depths of Xephyr and host server differ this is already taken care of
by the depth conversion routine.
It is a terrible wase to always convert and transmit the entire image
no matter of the size of the damaged area. One should probably use
sub-images here. For now we leave this as an exercise.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xcb_image_put() prints the entire image, therefore don't use an offset.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The DDX specific command line parsing function only gets called
if command line arguments are present. Therefore this function
is not suitable to initialize mandatory global variables.
Replace main() instead.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes mmap failures with 32-bit builds.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix missing newlines from error string and fix grammar.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The code in drmmode_set_cursor does not properly handle the case where
drmModeSetCursor2 returns any other error than EINVAL and silently fails to set
a cursor.
So only return when the drmModeSetCursor2 succeeds (i.e returns 0) and disable
the cursor2 usage on EINVAL.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1205725
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't even need to simulate button clicks; it's done automatically.
This also fixes scrolling in Qt5 apps.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
If no compat_output is defined, we inadvertently (attempt to) return
whatever data is at index -1. Instead, return NULL since that's what
callers are expecting.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Fix missing newlines from error string and fix grammar.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This adds tiling support to the server modesetting driver,
it retrieves the tile info from the kernel and translates
it into the server format and exposes the property.
v2.1: fix resetting tile property (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is ported from the same code in the ati and intel drivers,
It uses the same option name as nvidia and the other DDXes to
disable tearing down outputs as it is hard to avoid racing with clients.
v2: address two issues with DeleteUnusedDP12 enabled, reported
by Daniel Martin,
a) check we have a mode_output before destroying it
b) only delete *unused* displays (thanks Aaron for clarifying)
so we check if the output has a crtc and if it does we don't
delete it.
v3: drop the option to delete unused displays, just encode
behaviour into the randr spec.
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to cache the mode resources and with dynamic
connectors for mst support we don't want to. So first clean that
up before adding dynamic connector support.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This creates an automatic monitor for a tiled monitor at startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This puts the tiles of the monitor in the right place at
X server startup.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Change the X server default to do right-of placement
at startup. This gives an option to allow drivers to
override this placement, which has been used for server
drivers where both heads are not in the same physical
place.
Been in Fedora for a few years, but for tiled monitors
we really want something along these lines.
This is an ABI break.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows us to skip the screen section, the first
Device section will get assigned to the screen,
any remaining ones will get assigned to the GPUDevice
sections for the screen.
v2: fix the skipping unsuitable screen logic (Aaron)
v3: fix segfault if not conf file (me, 5s after sending v2)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows gpu devices to be specified in xorg.conf Screen sections.
Section "Device"
Driver "intel"
Identifier "intel0"
Option "AccelMethod" "uxa"
EndSection
Section "Device"
Driver "modesetting"
Identifier "usb0"
EndSection
Section "Screen"
Identifier "screen"
Device "intel0"
GPUDevice "usb0"
EndSection
This should allow for easier tweaking of driver options which
currently mess up the GPU device discovery process.
v2: add error handling for more than 4 devices, (Emil)
fixup CONF_ defines to consistency
add MAX_GPUDEVICES define
(yes there is two defines, this is consistent
with everywhere else).
remove braces around slp (Mark Kettenis)
man page fixups (Aaron)
v2.1: fixup whitespace (Aaron)
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Include the wrapped windows.h via X11/Xwindows.h before xcb_keysyms.h to avoid
type clashes caused by the unwrapped windows.h that includes.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Link xwinclip with -lpthread to fix build for MinGW
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
The xnfcalloc() macro took two arguments but simply multiplied them
together without checking for overflow and defeating any overflow
checking that calloc() might have done. Let's not do that.
The original XNFcalloc() function is left for now to preserve driver
ABI, but is marked as deprecated so it can be removed in a future round
of ABI break/cleanup.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It's going to multiply anyway, so if we have non-constant values, might
as well let it do the multiplication instead of adding another multiply,
and good versions of calloc will check for & avoid overflow in the process.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Modern Solaris releases provide this functionality in the OS via the
xsvc driver. Since the move to libpciaccess, nothing in Xorg uses
this aperture driver any more.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
At the moment, the X server uses a non-default timeout for D-Bus
messages to systemd-logind. The only timeouts normally used with
D-Bus are:
1) Infinite
2) Default
Anything else is just as arbitrary as Default, and so rarely makes
sense to use instead of Default.
Put another way, there's little reason to be fault tolerant against
a local root running daemon (logind), that in some configurations, the
X server already depends on for proper functionality.
This commit changes systemd-logind to just use the default timeouts.
Downstream-bug: https://bugzilla.redhat.com/show_bug.cgi?id=1209347
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
It's possible to receive a message reply in the message filter if a
previous message call timed out locally before the reply arrived.
The message_filter function only handles signals, at the moment, and
does not properly handle message replies.
This commit changes the message_filter function to filter out all
non-signal messages, including spurious message replies.
Downstream-bug: https://bugzilla.redhat.com/show_bug.cgi?id=1209347
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard
David Herrmann
Hans de Goede
Jeremy Huddleston Sequoia
Rui Matos
Ray Strode
Peter Hutterer
Egbert Eich
Egbert Eich
Michel Dänzer
Robert Ancell
Adel Gadllah
Dima Ryazanov
Jason Gerecke
Dave Airlie
Adam Jackson
Jon TURNEY
Alan Coopersmith