This patch makes it possible to use C-S key combinations
within Xephyr without losing access to the host window manager's
commands.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
winmsgwindow.c:99:11: warning: variable ‘winClass’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winprefslex.l:40:12: warning: redundant redeclaration of ‘yyparse’ [-Wredundant-decls]
winprefsyacc.h:130:5: note: previous declaration of ‘yyparse’ was here
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winprefsyacc.y:257:3: warning: nested extern declaration of ‘yylineno’ [-Wnested-externs]
Promote yylineno declaration to file scope
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winprefs.c:643:14: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winprefsyacc.y:174:5: warning: passing argument 1 of ‘AddMenuLine’ discards ‘const’ qualifier from pointer target type [enabled by default]
winprefsyacc.y:67:13: note: expected ‘char *’ but argument is of type ‘const char *’
winprefsyacc.y:174:5: warning: passing argument 3 of ‘AddMenuLine’ discards ‘const’ qualifier from pointer target type [enabled by default]
winprefsyacc.y:67:13: note: expected ‘char *’ but argument is of type ‘const char *’
winprefsyacc.y:175:5: warning: passing argument 3 of ‘AddMenuLine’ discards ‘const’ qualifier from pointer target type [enabled by default]
winprefsyacc.y:67:13: note: expected ‘char *’ but argument is of type ‘const char *’
winprefsyacc.y:178:5: warning: passing argument 3 of ‘AddMenuLine’ discards ‘const’ qualifier from pointer target type [enabled by default]
winprefsyacc.y:67:13: note: expected ‘char *’ but argument is of type ‘const char *’
winprefsyacc.c:1737:9: warning: passing argument 1 of ‘yyerror’ discards ‘const’ qualifier from pointer target type [enabled by default]
winprefsyacc.y:82:12: note: expected ‘char *’ but argument is of type ‘const char *’
winprefsyacc.c:1854:3: warning: passing argument 1 of ‘yyerror’ discards ‘const’ qualifier from pointer target type [enabled by default]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
InitOutput.c:1032:19: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winmultiwindowicons.c:403:29: warning: passing argument 8 of ‘XGetWindowProperty’ from incompatible pointer type [enabled by default]
/usr/include/X11/Xlib.h:2688:12: note: expected ‘Atom *’ but argument is of type ‘long unsigned int *’
Looks like this has been wrong since I added it in 527cf131 :-(
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix various pieces of debug output, mainly under --enable-debug, which use a
"%08x" printf format for a pointer type. Use "%p" format for 64-bit portability.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
glext.h currently requires GL_GLEXT_PROTOTYPES in order to prototype
glCompressedTexImmage* functions
generated_gl_shim.c:2859:6: warning: no previous prototype for 'glCompressedTexImage3DARB' [-Wmissing-prototypes]
generated_gl_shim.c:2866:6: warning: no previous prototype for 'glCompressedTexImage2DARB' [-Wmissing-prototypes]
generated_gl_shim.c:2873:6: warning: no previous prototype for 'glCompressedTexImage1DARB' [-Wmissing-prototypes]
generated_gl_shim.c:2880:6: warning: no previous prototype for 'glCompressedTexSubImage3DARB' [-Wmissing-prototypes]
generated_gl_shim.c:2887:6: warning: no previous prototype for 'glCompressedTexSubImage2DARB' [-Wmissing-prototypes]
generated_gl_shim.c:2894:6: warning: no previous prototype for 'glCompressedTexSubImage1DARB' [-Wmissing-prototypes]
generated_gl_shim.c:2901:6: warning: no previous prototype for 'glGetCompressedTexImageARB' [-Wmissing-prototypes]
Also, explicitly prototype glXGetProcAddressARB(), as glx/glxdri*.c does, as
it's not practical to include glx.h here...
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
xevents.c: In function 'winClipboardInitMonitoredSelections':
xevents.c:129:5: error: 'for' loop initial declarations are only allowed in C99 mode
for (int i = 0; i < CLIP_NUM_SELECTIONS; ++i)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winshadddnl.c: In function ‘winRedrawScreenShadowDDNL’:
winshadddnl.c:991:9: error: ‘return’ with no value, in function returning non-void [-Werror=return-type]
Just wrong in 1c34e774
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This existed to be passed to the bs recovery routine; since we back all
planes, we don't care.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
A careful read shows that it was always NULL. It hasn't always been; as
the DDX spec indicates, it was the "occluded region that has backing
store", but since that backing store code is long gone, we can nuke it.
mi{,Overlay}WindowExposures get slightly simpler here, and will get even
simpler in just a moment.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
By default modesetting now tries to enable X acceleration using
glamor, but falls back to normal shadowfb if GL fails to initialize.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
As I was editing code, the top-level .dir-locals.el was making my new
stuff conflict with the existing style. Make it consistently use the
xorg style, instead.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Again, as the documentation says, "unsupported, obsolete".
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
As the man page says, "unsupported, experimental, and barely
functional". The last even minor updates to any of this were back in
2004, presumably it's not getting better any time soon.
This is also the only GC ops implementation in the tree that actually
falls all the way down to the spans routines for everything, so that's
pretty nice to be rid of.
v2: Fix stray break statement (Jon)
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
We know we're atop fb which is atop micmap, the only thing we need to
hook is InstallColormap to handle the xwd colormap change.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Remove the error return path from the FLAG_PIXMAP path and leave the
default value in place. There's no point skipping the rest of this
function.
Signed-off-by: Keith Packard <keithp@keithp.com>
All references to modinit.h have been remove with:
a1d41e3 Move extension initialisation prototypes into extinit.h
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
No modern driver pays attention to this. Presumably there existed
hardware once where you couldn't just read the right values out of the
CRTC.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
POSIX requires that these be named correctly, no need to be clever.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
$ gcc --version
gcc (Gentoo 4.4.3-r2 p1.2) 4.4.3
/jhbuild/checkout/xorg/xserver/os/log.c: In function ‘LogInit’:
/jhbuild/checkout/xorg/xserver/os/log.c:199: error: #pragma GCC diagnostic not allowed inside functions
/jhbuild/checkout/xorg/xserver/os/log.c:201: warning: format not a string literal, argument types not checked
/jhbuild/checkout/xorg/xserver/os/log.c:212: error: #pragma GCC diagnostic not allowed inside functions
/jhbuild/checkout/xorg/xserver/os/log.c:214: warning: format not a string literal, argument types not checked
etc.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When dix hands us a new cursor we proxy it through to the host server;
since we keep the host XID on the cursor bits private we can switch
among them with just ChangeWindowAttributes.
v2:
Use xcb-renderutil for argb format lookup (Uli, Keith)
Fall back to core cursors for host RENDER < 0.5 (Keith)
Drop useless ephyrEnableCursor
Consistently create/destroy the cursor image GC on both paths
Treat null cursor from dix as invisible
v3:
Initialize the invisible cursor's image (Keith)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pretty sure I'm guilty of adding this. I think I was thinking of trying
to be compatible with some really old binary-only driver that I had
vague aspirations of reverse-engineering, but since I haven't gotten
around to it in the intervening decade...
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Move drm.xml out of the automake conditional so make dist includes it
even if glamor-egl is disabled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83960
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
v2: Fix libdrm version check, and use XORG_VERSION_* instead of a
static 1.0.0 version for the driver module.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Since the sparse stuff is gone none of these variables get used for
anything, they're just dead side-effect-less execution.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
pciaccess does this for us, and none of our internal hooks really
remain. This does remove a cleanup pass from the BSD code, but the case
it's covering (a previous server leaving MTRRs around) can't happen
anymore.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If the linux vm86 backend changes look somewhat horrifying to you,
that's because you have taste.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The only driver even pretending to check the result is mach64 anyway.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This API sucks. Fortunately it's mostly unused at this point. geode,
sis, and xgi need minor patches to use the corresponding pciaccess code,
neomagic will (more explicitly) lose its non-PCI support, and newport
will need to be ported to /dev/mem or the platform bus or something.
This should also make it pretty clear that alpha's sparse memory support
was basically not a thing anymore, very few tears shed.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The server will always have it.
v2: Clean up some weird formatting from the unifdeffing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Including any server header might define the macro _XSERVER64 on 64 bit
machines. That macro must _NOT_ be defined for Xlib client code, otherwise bad
things happen. So let's undef that macro if necessary.
Remove server directories from include path to ensure no server includes are
included
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Only use XSetIOErrorHandler() to add to the global XSetIOErrorHandler() chain
once. If we do it every restart, then we make a loop in the handler chain, and
we end up with a thread spinning in that loop when the server shuts down...
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove XOpenDisplay() retry code. This isn't a sensible thing for the
application to be doing, and XWin server needs to retry much more than just
XOpenDisplay().
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Check specially that setjmp() returned a value which we don't pass to longjmp()
seems a bit over-complex.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Also removing server headers we might clash with and no longer need. Make
a few adjustments to allow for this change:
- provide a prototype of ErrorF()
- use the MAX() macro provided by sys/param.h, not the max() macro provided by misc.h
- use the X 'Bool' type rather than the unwrapped Windows 'BOOL' type
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Add xwinclip test client, which includes stubs for winDebug(), ErrorF()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Consistently use ErrorF() rather than winErrorFVerb()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Look up all atoms of interest in clipboard code in winClipboardProc() and pass
them down.
This avoids the need to check serverGeneration to notice when we need to
invalidate cached atom values.
Also consistently use cached atom values everywhere, rather than sometimes just
doing XInternAtom() again.
Remove WIN_LOCAL_PROPERTY as unused now, as we only refer to CYGX_CUT_BUFFER
once and do that directly.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Add fUseUnicode as parameter to winClipboardProc()
Access g_fUseUnicode global when calling it
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Rename the libwinclipboard internal header from winclipboard.h to internal.h
Put libwinclipboard's public interface into winclipboard.h
This lets winclipboardinit.c partake of that public interface, and all X server
headers without clashes
winInitClipboard() prototype belongs in a server header
v2: Remove duplicate declaration of winClipboardWindowDestroy()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Return a shutdown flag from winClipboardProc(), and use it in
winClipboardThreadProc() to determine if we should stop.
Currently this is set if the clipboard messaging window received a WM_QUIT.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Move clipboard integration code down to a subdirectory and build as a
convenience library
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Move winFixClipboardChain() into winclipboardthread.c
Add winCLipboardWindowDestroy() function to access it for WM_DESTROY
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Eliminate the g_pClipboardDisplay and g_iClipboardWindow globals used to make
those values available to the clipboard wndproc, by passing them in via the
WM_CREATE message instead.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Move winClipboardCreateMessagingWindow() from winclipboardinit.c to
winclipboardthread.c, the only place that uses it, and make it static.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Use the XFixesSetSelectionNotify event instead of a SetSelectionOwner wrapper,
the completely equivalent client-side mechanism.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Hoist the setting of g_fClipboardStarted flag up one level.
Also move up the clearing of the g_fClipboardLaunched at the end of clipboard
function.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winProcEstablishConnection doesn't need to check if clipboard has already been
started.
It should be clear that we start the thread only once when the wrapper tells us
to, as the wrapper unhooks itself thereafter.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Hoist clipboard thread restart up one level.
Note that currently g_fClipboardLaunched is set the first time in the
winProcEstablishConnection wrapper, and subsequent times when the clipboard
thread restarts itself.
Try to clarify this and just set g_fClipboardLaunched before starting the
thread.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Push winClipboardShutdown() into winclipboardinit.c
This lets us make g_ptClipboardProc static
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Commit c1bf3baa44 removed all but one of the
pthread_exit() calls which used to call winClipboardThreadExit()
Fix the final remaining one to exit via done label on IOError instead.
Also fix a comment and report pre-flush failure to log, but do not exit
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Instead of sending every little rect. Lets x11perf run to completion,
makes 'while true; do gtkperf -a; done' take longer to crash.
This is effectively a resend of the same logic against the old
xfree86+xwayland branch:
http://lists.x.org/archives/xorg-devel/2013-October/038453.html
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This implements simple throttling that keeps us to one attach per
frame. There isn't really an active performance benefit, since the
buffers will be redrawn only once per frame anyway, but it does cut down
on the chatty network traffic. Since the Wayland sockets might fill
up as well, the cut down on the volume of data we send out also provides
us with a big stability benefit.
Namely, mutter is a lot more stable running gtkperf, a fairly intensive
X11 application, after this change.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
If something quickly maps and unmaps a window, then we'll immediately
create and destroy the Wayland surface that cooresponds to that
window. If our mouse pointer is over the window when the surface is
created, we'll receive a enter on the window.
Since resource creation and destruction is not synchronous, that
means that the compositor will queue up an event for a resource that's
eventually destroyed. On the client-side, when we receive this message,
we note that the resource isn't allocated, and get a NULL surface in our
enter handler. We immediately try to dereference this, and then crash.
This was caused by running gtkperf while moving the window a lot.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
The piglit test glx_make_current triggers this assertion, by making the context
current on a different drawable before issuing a glXSwapBuffers()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
It happens whenever a GLX client uses GL on a window before it's been mapped, so
don't log it like an error.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Keith Packard
William ML Leslie
Jon TURNEY
Adam Jackson
Eric Anholt
Daniel Martin
Julien Cristau
Jasper St. Pierre