Using a list of Present windows that need to be called back.
This prepares for the following change, there should be no change in
observed behaviour.
v2:
* Use xwl_window_create_frame_callback instead of making the
frame_listener struct non-static (Olivier Fourdan)
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Damage coordinates are relative to the drawable, (0,0) being the top
left corner inside the border.
Therefore, when applying damages or accumulating damages between window
buffers, we need to take the window border width into account as well,
otherwise the updates might be only partial or misplaced.
Related: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Right now, we would recycle the window buffers whenever the window the
window is resized.
This, however, is not sufficient to guarantee that the buffers are up
to date, since changing the window border width for example would not
trigger a `WindowResize` (the border being outside the window).
Make sure we recycle the buffers on `SetWindowPixmap` to ensure that
the buffers will be recycled whenever the pixmap size is changed.
Related: https://gitlab.freedesktop.org/xorg/xserver/issues/951
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The Present code sends the idle notification event to the client after
xwl_present_flush returns. If we don't flush our GPU work here, the
client may race to draw another frame to the same buffer, so we may end
up copying (parts of) that new frame instead of the one we meant to.
Fixes https://gitlab.freedesktop.org/xorg/xserver/issues/835
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Xwayland takes care of not attaching a new buffer if a frame callback is
pending.
Yet, the existing buffer (which was previously attached) may still be
updated from the X11 side, causing unexpected visual glitches to the
buffer.
Add multiple buffering to the xwl_window and alternate between buffers,
to leave the Wayland buffer untouched between frame callbacks and avoid
stuttering or tearing issues.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/835
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Add a mechanism to create, recycle and destroy window buffers when
needed.
Typically, this adds a new `xwl_window_buffer` structure which
represents a buffer for a given Xwayland window.
Each Xwayland window has two different pools of buffers:
- The available buffers pool:
Those are buffers which where created previously and that have either
not been submitted to the compositor or submitted and released.
- The unavailable buffers pool:
Those are typically the buffers which are being used by the
compositor, awaiting a release.
Initially, an Xwayland window starts with both pools empty. As soon as a
new buffer is needed, it's either created (if there is none available)
or picked from the pool of available buffers.
Once submitted to the compositor, the buffer is moved to the pool of
unavailable buffers. When the corresponding `wl_buffer` is released by
the compositor, it is moved back to pool of available buffers again to
be reused when needed.
To avoid keeping too many buffers around doing nothing, a garbage
collection of older, unused buffers also takes care of disposing the
buffers being unused for some time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The API `wl_buffer_add_listener` is misleading in the sense that there
can be only one `wl_buffer` release callback, and trying to add a new
listener when once is already in place will lead to a protocol error.
The Xwayland EGL backends may need to set up their own `wl_buffer`
release listener, meaning that there is no way to our own `wl_buffer`
release callback.
To avoid the problem, add our own callback API to be notified when the
`wl_buffer` associated with an `xwl_pixmap` is released, triggered from
the different `xwl_pixmap` implementations.
Also update the Present code to use the new buffer release callback API.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, when a X11 client (usually the X11 window manager from a
Wayland compositor) changes the value of the X11 property
`_XWAYLAND_ALLOW_COMMITS` from `false` to `true`, all pending frame
callbacks on the window are discarded so that the commit occurs
immediately.
Weston uses that mechanism to prevent the content of the window from
showing before it's ready when mapping the window initially, but
discarding the pending frame callbacks has no effect on the initial
mapping of the X11 window since at that point there cannot be any frame
callback on a surface which hasn't been committed yet anyway.
However, discarding pending frame callbacks can be problematic if we
were to use the same `_XWAYLAND_ALLOW_COMMITS` mechanism to prevent
damages to be posted before the X11 toplevel is updated completely
(including the window decorations from the X11 window manager).
Remove the portion of code discarding the pending frame callback,
Xwayland should always wait for a pending frame callback if there's one
before posting new damages.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/333
For some reason, indentation for EGL backend hooks was broken.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, Xwayland pixmap SHM code uses `malloc()` to allocate the
xwl_pixmap.
Use `calloc()` instead, as the EGLstream backend does, as it is safer
(initializing the allocated data to 0).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, glamor GBM backend uses `malloc()` to allocate the
xwl_pixmap.
Use `calloc()` instead, as the EGLstream backend does, as it is safer
(initializing the allocated data to 0).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The definition by the manual is `calloc(size_t nmemb, size_t size)`.
Swap the arguments of calloc() calls to match the definition.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When a pixmap is created with a backing FBO, the FBO should be cleared
to avoid rendering uninitialized memory. This could happen when the
pixmap is rendered without being filled in its entirety.
One example is when a top-level window without a background is
resized. The pixmap would be reallocated to prepare for more pixels,
but uninitialized memory would be rendered in the resize offset until
the client sends a frame that fills these additional pixels.
Another example is when a new top-level window is created without a
background. Uninitialized memory would be rendered after the pixmap is
allocated and before the client sends its first frame.
This issue is only apparent in OpenGL implementations that don't zero
the VRAM of allocated buffers by default, such as RadeonSI.
Signed-off-by: Dor Askayo <dor.askayo@gmail.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/636
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
`glGetString(GL_VERSION)` will return NULL without a current context.
Commit dabc7d8b (“xwayland: Fall back to GLES2 if we don't get at least
GL 2.1 in glamor”) would check the context is created, but it is made
current just after, so the call to `epoxy_gl_version()` would return 0,
hence defeating the version check.
Make the context current prior to call `epoxy_gl_version()`.
Fixes: dabc7d8b - xwayland: Fall back to GLES2 if we don't get at least
GL 2.1 in glamor
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/932https://gitlab.freedesktop.org/xorg/xserver/merge_requests/324
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Some particularly unfortunate hardware (Intel gen3, mostly) will give
you GLES2 but not GL 2.1. Fall back to GLES2 for such cases so you still
get accelerated GLX.
Define EGL_NO_X11 everywhere were we also define MESA_EGL_NO_X11_HEADERS,
EGL_NO_X11 is the MESA_EGL_NO_X11_HEADERS equivalent for the egl headers
shipped with libglvnd.
This fixes the xserver not building with the libglvnd-1.2.0 headers:
In file included from /usr/include/EGL/eglplatform.h:128,
from /usr/include/epoxy/egl_generated.h:11,
from /usr/include/epoxy/egl.h:46,
from glamor_priv.h:43,
from glamor_composite_glyphs.c:25:
/usr/include/X11/Xlib.h:222:2: error: conflicting types for 'GC'
222 | *GC;
| ^~
In file included from glamor.h:34,
from glamor_priv.h:32,
from glamor_composite_glyphs.c:25:
../include/gcstruct.h:282:3: note: previous declaration of 'GC' was here
282 | } GC;
| ^~
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Apps using randr to change the resolution when going fullscreen, in
combination with _NET_WM_STATE_FULLSCREEN to tell the window-manager (WM)
to make their window fullscreen, expect the WM to give the fullscreen window
the size of the emulated resolution as would happen when run under Xorg (*).
We need the WM to emulate this behavior for these apps to work correctly,
with Xwaylands resolution change emulation. For the WM to emulate this,
it needs to know about the emulated resolution for the Windows owning
client for each monitor.
This commit adds a _XWAYLAND_RANDR_EMU_MONITOR_RECTS property, which
contains 4 Cardinals (32 bit integers) per monitor with resolution
emulation info. Window-managers can use this to get the emulated
resolution for the client and size the window correctly.
*) Since under Xorg the resolution will actually be changed and after that
going fullscreen through NET_WM_STATE_FULLSCREEN will size the window to
be equal to the new resolution.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Games based on the allegro gaming library or on ClanLib-1.0 do not size
their window to match the fullscreen resolution, instead they use a
window covering the entire screen, drawing only the fullscreen resolution
part of it.
This commit adds a check for these games, so that we correctly apply a
viewport to them making fullscreen work properly for these games under
Xwayland.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for fake mode changes using viewport, for apps which want to
change the resolution when going fullscreen.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
crtc->mode reflects the mode set through the xrandr extension, once we
add support for also changing the mode through the vidmode extension this
will no longer correctly reflect the emulated resolution.
Add a new xwlVidModeGetCurrentRRMode helper which determines the mode by
looking at the emulated_mode instead.
Likewise add a xwlVidModeGetRRMode helper and use that in
xwlVidModeCheckModeForMonitor/xwlVidModeCheckModeForDriver to allow any
mode listed in the randr_output's mode list.
This is a preparation patch for adding emulated mode/resolution change
support to Xwayland's XF86 vidmode extension emulation.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for adding emulated mode/resolution change
support to Xwayland's XF86 vidmode extension emulation, using the
Wayland viewport extension.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for per client randr-resolution change emulation using viewport,
for apps which want to change the resolution when going fullscreen.
Partly based on earlier work on this by Robert Mader <robert.mader@posteo.de>
Note SDL2 and SFML do not restore randr resolution when going from
fullscreen -> windowed, I believe this is caused by us still reporting the
desktop resolution when they query the resolution. This is not a problem
because when windowed the toplevel window size includes the window-decorations
so it never matches the emulated resolution.
One exception would be the window being resizable in Windowed mode and the
user resizing the window so that including decorations it matches the
emulated resolution *and* the window being at pos 0x0. But this is an
extreme corner case. Still I will submit patches upstream to SDL2
and SFML to always restore the desktop resolution under Xwayland,
disabling resolution emulation all together when going windowed.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for storing per output randr/vidmode emulated resolution
into the per client data.
Since we do not have a free/delete callback for the client this uses
a simple static array. The entries are tied to a specific output by the
server_output_id, with a server_output_id of 0 indicating a free slot
(0 is the "None" Wayland object id).
Note that even if we were to store this in a linked list, we would still
need the server_output_id as this is *per client* *per output*.
This is a preparation patch for adding randr/vidmode resolution
change emulation.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add per client private data, which for now is empty.
This is a preparation patch for adding randr/vidmode resolution
change emulation.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds the RandR 1.2 interface to xwayland and allows modes
advertised by the compositor to be set in an undistructive manner.
With this patch, applications that try to set the resolution will usually
succeed and work while other apps using the same xwayland
instance are not affected at all.
The RandR 1.2 interface will be needed to implement fake-mode-setting and
already makes applications work much cleaner and predictive when a mode
was set.
[hdegoede@redhat.com: Make crtc_set only succeed if the mode matches
the desktop resolution]
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation patch for adding support for apps which want to
change the resolution when they go fullscreen because they are hardcoded
to render at a specific resolution, e.g. 640x480.
Follow up patches will fake the mode-switch these apps want by using
WPviewport to scale there pixmap to cover the entire output.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a viewport is set, damage will only work properly when using
wl_surface_damage_buffer instead of wl_surface_damage.
When no viewport is set, there should be no difference between
surface and buffer damage.
This is a preparation patch for using viewport to add support for fake
mode-changes through xrandr for apps which want to change the resolution
when going fullscreen.
Changes by Hans de Goede <hdegoede@redhat.com>:
-Split the damage changes out into their own patch
-Add xwl_surface_damage helper
-Also use buffer_damage / the new helper for the present and cursor code
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit adds support for the wayland wp_viewport extension, note
nothing uses this yet.
This is a preparation patch for adding support for fake mode-changes through
xrandr for apps which want to change the resolution when going fullscreen.
[hdegoede@redhat.com: Split the code for the extension out into its own patch]
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In non-rootless mode, not all pixmaps need a wl_buffer backing.
Suggested-by: Twaik Yont (@twaik) in #834
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The compositor may send DRM_FORMAT_MOD_INVALID instead of a list of
modifiers for various reasons. Handle this gracefully by ignoring it.
Without this, if a compositor would send DRM_FORMAT_MOD_INVALID, it'd
result in empty windows provided by Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This FD also triggers the "wait for WM_S0" paths, so that the
compositor may set up a "maintenance line" for Xwayland, for
services that are essential to run before any client (eg. xrdb).
Those services would use this FD, disguised as an extra display
connection.
This -initfd can be seen as a generalization of -wm, a Wayland
compositor may use -initfd to launch its WM and any other clients
that should start up, or it may use -wm as a dedicated connection for
the WM and optionally use -initfd for the misc. startup clients.
If either of -wm or -initfd is passed, Xwayland will expect a selection
notification on WM_S0 before incorporating the FDs in -listen to the
poll list.
Also, correct a minor typo in the listenfd argument output,
give → given.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
If Xwayland gets to realize a window meant for composition before the
compositor redirected windows (i.e. redirect mode is not RedirectDrawManual
yet), the window would stay "invisible" as we wouldn't create a
wl_surface/wl_shell_surface for it at any later point.
This scenario may happen if the wayland compositor sets up a X11 socket
upfront, but waits to raise Xwayland until there are X11 clients. In this
case the first data on the socket is the client's, the compositor can hardly
beat that in order to redirect subwindows before the client realizes a
Window.
In order to jump across this hurdle, allow the late creation of a matching
(shell) surface for the WindowPtr on SetWindowPixmapProc, so it is ensured
to be created after the compositor set up redirection.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This will be dissociated in future commits to handle the cases
where windows are being realized before there is a compositor
handling redirection.
In that case, we still want the DamagePtr to be registered upfront
on RealizeWindowProc before a corresponding xwl_window might be
created. Most notably, it cannot be lazily created on
SetWindowPixmapProc as damage accounting gets broken.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
This adds support for xdg-output-unstable-v1 version 3, added in [1].
This new version deprecates zxdg_output_v1.done and replaces it with
wl_output.done. If the version is high enough, there's no need to wait for both
an xdg_output.done event and a wl_output.done event -- we only care about
wl_output.done.
[1]: 962dd53537
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Some modules are required in multiple places in the meson file.
Move the actual requirements to the top of the file as a variable so
that updating a version does not require changing the actual value in
multiple places.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Building Xwayland without glamor support would raise a warning at build
time:
xwayland.c: In function ‘xwl_screen_init’:
xwayland.c:980:10: warning: unused variable ‘use_eglstreams’
980 | Bool use_eglstreams = FALSE;
| ^~~~~~~~~~~~~~
When building without glamor support, we cannot have EGL Streams support
either, the two being related. So we do not need to declare the variable
`use_eglstreams` if glamor is not enabled.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When building Xwayland without glamor support enabled using automake,
the build would fail at link time trying to find `glamor_block_handler`:
/usr/bin/ld: xwayland-glx.o: in function `egl_drawable_wait_x':
hw/xwayland/xwayland-glx.c:102: undefined reference to
`glamor_block_handler'
Make sure we don't try to build `xwayland-glx.c` without glamor in the
Xwayland Makefile.
Note: Meson build is fine because it's already build only with glamor
enabled.
Fixes: commit 8469241 - "xwayland: Add EGL-backed GLX provider"
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Both `gbm_bo_create()` and `gbm_bo_create_with_modifiers()` can fail and
return `NULL`.
If that occurs, `xwl_glamor_gbm_create_pixmap()` will not create a
pixmap for the (NULL) GBM bo, but would still try to free the bo which
leads to a crash in mesa:
[...]
#7 <signal handler called>
#8 in gbm_bo_destroy (bo=0x0) at ../src/gbm/main/gbm.c:439
#9 in xwl_glamor_gbm_create_pixmap () at xwayland-glamor-gbm.c:245
#10 in ProcCreatePixmap () at dispatch.c:1440
#11 in Dispatch () at dispatch.c:478
#12 in dix_main () at main.c:276
To avoid the crash, only free the GBM bo if not `NULL`.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1729925
There's not really a good way to query this from the wayland server, so
just set the maximum to the X11 protocol limits. While we're at it,
lower the minimum screen size to something implausibly small too, just
in case.
Fixes: xorg/xserver#850
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Running Xwayland non-rootless and resizing the output would lead to a
crash while trying to update the larger areas of the root window.
Make sure we resize the backing pixmap according to the new output size
to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/834
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Using the existing command line option "-listen" for passing file
descriptors between the Wayland compositor and Xwayland is misleading,
Xwayland should add is own command line option for that specific use.
As XWayland is spawned by the Wayland compositor, we cannot just change
the option, as that would break all existing Wayland compositors using
Xwayland, so we add a new options "-listenfd" and mark the previous one
as deprecated and log a warning, but it still works for backward
compatibility.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
https://gitlab.freedesktop.org/xorg/xserver/merge_requests/214
Xwayland uses the command line option “-listen” to pass file descriptors
from the Wayland compositor.
That breaks the traditional, documented behavior of the “-listen”
command line option which is to enable a transport type.
Checks if the given option starts with a digit, otherwise treat it as a
regular transport type.
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/817
Suggested-by: Rodrigo Exterckötter Tjäder
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
a2rgb10 configs would end up with channel masks corresponding to
argb8888. This would confuse the GLX core code into matching an a2rgb10
config to the root window visual, and that would make things look wrong
and bad.
Fix this by handling more cases. We're still not fully general here, and
this could still be wrong on big-endian. The XXX comment about doing
something less ugly still applies, ideally we would get this information
out of EGL instead of making lucky guesses. Still, better than it was.
Fixes: xorg/xserver#824
Hiding the tablet tool cursor results in it being hidden forever after.
This is due to the stale frame callback that will neither be disposed
or replaced. This can be reproduced in krita (X11) as the pointer
cursor is hidden while over the canvas.
Clearing the frame callback ensures the correct behavior in future
xwl_tablet_tool_set_cursor() calls (i.e. a new cursor surface being
displayed, and a new frame callback created), and is 1:1
with xwl_seat_set_cursor() for pointers.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
With `glamor_set_pixmap_texture()` returning its status, remove the hack
and use the return value.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The current code in `xwl_glamor_gbm_create_pixmap_for_bo()` may fail in
several cases that are not checked for:
- `eglCreateImageKHR()` may have failed to create the image,
- `glEGLImageTargetTexture2DOES()` may fail and set an error,
- `glamor_set_pixmap_texture()` may fail for very large pixmaps
because the corresponding FBO could not be created.
Trying to upload content to a pixmap with no texture will crash Mesa,
glamor and Xwayland, e.g.:
XXX fail to create fbo.
(EE)
(EE) Backtrace:
(EE) 0: Xwayland (OsSigHandler+0x29)
(EE) 1: libpthread.so.0 (funlockfile+0x50)
(EE) 2: libc.so.6 (__memmove_avx_unaligned_erms+0x215)
(EE) 3: dri/i965_dri.so (_mesa_format_convert+0xab3)
(EE) 4: dri/i965_dri.so (_mesa_texstore+0x205)
(EE) 5: dri/i965_dri.so (store_texsubimage+0x28c)
(EE) 6: dri/i965_dri.so (intel_upload_tex+0x13b)
(EE) 7: dri/i965_dri.so (texture_sub_image+0x134)
(EE) 8: dri/i965_dri.so (texsubimage_err+0x150)
(EE) 9: dri/i965_dri.so (_mesa_TexSubImage2D+0x48)
(EE) 10: Xwayland (glamor_upload_boxes+0x246)
(EE) 11: Xwayland (glamor_copy+0x4d1)
(EE) 12: Xwayland (miCopyRegion+0x96)
(EE) 13: Xwayland (miDoCopy+0x43c)
(EE) 14: Xwayland (glamor_copy_area+0x24)
(EE) 15: Xwayland (damageCopyArea+0xba)
(EE) 16: Xwayland (compCopyWindow+0x31c)
(EE) 17: Xwayland (damageCopyWindow+0xd3)
(EE) 18: Xwayland (miResizeWindow+0x7b7)
(EE) 19: Xwayland (compResizeWindow+0x3a)
(EE) 20: Xwayland (ConfigureWindow+0xa96)
(EE) 21: Xwayland (ProcConfigureWindow+0x7d)
(EE) 22: Xwayland (Dispatch+0x320)
(EE) 23: Xwayland (dix_main+0x366)
(EE) 24: libc.so.6 (__libc_start_main+0xf3)
(EE) 25: Xwayland (_start+0x2e)
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
Check for the possible cases of failure above and fallback to the
regular glamor pixmap creation when an error is detected.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/661
Without this we're using driswrast to set up GLX visuals. This is
unfortunate because llvmpipe does not expose multisample configs, so
various apps that expect them will fail. With this we just query the
capabilities of the EGL that's backing glamor, and reflect that to the
GLX clients. This also paves the way for xserver to stop being a DRI
driver loader, which is nice.
Fixes: xorg/xserver#640Fixes: xorg/xserver#643
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98272
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
On pointer enter notification, Xwayland checks for an existing pointer
warp with a `NULL` sprite.
In turn, `xwl_pointer_warp_emulator_maybe_lock()` checks for an existing
grab and the destination window using `XYToWindow()` which does not
check for the actual sprite not being `NULL`.
So, in some cases, when the pointer enters the surface and there is an
existing X11 grab which is not an ownerEvents grab, Xwayland would crash
trying to dereference the `NULL` sprite pointer:
#0 __GI_raise ()
#1 __GI_abort () at abort.c:79
#2 OsAbort () at utils.c:1351
#3 AbortServer () at log.c:879
#4 FatalError () at log.c:1017
#5 OsSigHandler () at osinit.c:156
#6 OsSigHandler () at osinit.c:110
#7 <signal handler called>
#8 XYToWindow (pSprite=0x0, x=0, y=0) at events.c:2880
#9 xwl_pointer_warp_emulator_maybe_lock () at xwayland-input.c:2673
#10 pointer_handle_enter () at xwayland-input.c:434
Avoid the crash by simply checking for the sprite being not `NULL` in
`xwl_pointer_warp_emulator_maybe_lock()`
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugzilla.redhat.com/1708119
Commit d8ec33fe05 added libglxvnd.la to
Xwayland_LDFLAGS but GLX can be disabled through --disable-glx.
In this case, build fails on:
make[3]: *** No rule to make target '../../glx/libglxvnd.la', needed by 'Xwayland'. Stop.
make[3]: *** Waiting for unfinished jobs....
Fixes:
- http://autobuild.buildroot.org/results/397f8098c57fc6c88aa12dc8d35ebb1b933d52ef
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
xwl_present_cleanup frees the struct xwl_present_window memory,
so if there's a pending callback, we have to destroy it to prevent
use-after-free in xwl_present_sync_callback.
Should fix issue #645.
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Xwayland creates and destroys the CRTC along with the Wayland outputs,
so there is possibly a case where the number of CRTC drops to 0.
However, `xwl_present_get_crtc()` always return `crtcs[0]` which is
invalid when `numCrtcs` is 0.
That leads to crash if a client queries the Present capabilities when
there is no CRTC, the backtrace looks like:
#0 raise() from libc.so
#1 abort() from libc.so
#2 OsAbort() at utils.c:1350
#3 AbortServer() at log.c:879
#4 FatalError() at log.c:1017
#5 OsSigHandler() at osinit.c:156
#6 OsSigHandler() at osinit.c:110
#7 <signal handler called>
#8 main_arena() from libc.so
#9 proc_present_query_capabilities() at present_request.c:236
#10 Dispatch() at dispatch.c:478
#11 dix_main() at main.c:276
To avoid returning an invalid pointer (`crtcs[0]`) in that case, simply
check for `numCrtcs` being 0 and return `NULL` in that case.
Thanks to Michel Dänzer <michel.daenzer@amd.com> for pointing this as a
possible cause of the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Bugzilla: https://bugzilla.redhat.com/1609181
Since 08843efc KWin was not able to start a Wayland session. Independently
of listen_fd_count add_client_fd must be called. Same holds for the
wm_selection_callback. Therefore just remove the condition.
Bugzilla: https://bugs.freedesktop.org/109220
Signed-off-by: Roman Gilg <subdiff@gmail.com>
The buffer release queue has two kinds of entries:
* Pending async flips.
* Completed flips waiting for their buffer to be released by the Wayland
compositor.
xwl_present_timer_callback neither completes async flips nor releases
buffers, so the timer isn't needed for the buffer release queue.
Fixes issue #12. Presumably the problem was that Present operations on
unmapped windows were executed immediately instead of only when reaching
the target MSC.
When a window is unrealized, a pending frame callback may never be
called, which could result in repeatedly freezing until the frame timer
fires after a second.
Fixes these symptoms when switching from fullscreen to windowed mode in
sauerbraten.
There's no need to keep track of the window which last performed a
Present flip. This fixes crashes due to the assertion in
xwl_present_flips_stop failing. Fixes issue #10.
The damage generated by a flip only needs to be ignored once, then
xwl_window::present_flipped can be cleared. This may fix freezing in
the (hypothetical) scenario where Present flips are performed on a
window, followed by other drawing requests using the window as the
destination, but nothing triggering xwl_present_flips_stop. The damage
from the latter drawing requests would continue being ignored.
There are logically server state not screen state. Not that multiple
screens works, at the moment, but that's no excuse to be sloppy.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Completing them from xwl_present_sync_callback had at least two issues:
* It was before the MSC was incremented in xwl_present_frame_callback,
so the MSC value in the completion event could be lower than the
target specified by the client. This could cause hangs with the Mesa
Vulkan drivers.
* It allowed clients to run at a frame-rate higher than the Wayland
compositor's frame-rate, wasting energy on generating frames which
were never displayed. This isn't expected to happen unless the client
specified PresentOptionAsync (in which case flips are still completed
from xwl_present_sync_callback, allowing higher frame-rates).
v2:
* Make xwl_present_has_events return true when there's a pending
"synchronous" flip, so those complete after at most ~1 second even if
the Wayland server doesn't send a frame event.
Bugzilla: https://bugs.freedesktop.org/106713
Apart from simplifying the code, this should also prevent a condition
(which might only be possible with the following fix) reported in
https://gitlab.freedesktop.org/wayland/weston/issues/115#note_52467:
1. xwl_present_timer_callback indirectly calls xwl_present_reset_timer
-> xwl_present_free_timer
2. xwl_present_timer_callback then returns a non-0 value, so DoTimer
calls TimerSet with the old xwl_present_window->frame_timer pointer
which was freed in step 1 => use after free
Calling xwl_present_reset_timer explicitly passes NULL to TimerSet if
step 1 freed xwl_present_window->frame_timer, and it will allocate a new
one.
The function `xwl_glamor_gbm_create_pixmap()` first creates a buffer
objects and then creates the xwl_pixmap from it.
However, `xwl_glamor_gbm_create_pixmap_for_bo()` is not called if the
buffer object creation fails, and `xwl_glamor_gbm_create_pixmap()`
simply returns `glamor_create_pixmap()`.
The problem with this is that if `xwl_glamor_gbm_create_pixmap_for_bo()`
is not called then neither is `xwl_pixmap_set_private()` and further
calls to `xwl_pixmap_get()` will return NULL and cause a NULL pointer
dereference if the return value is not checked:
#0 xwl_glamor_gbm_get_wl_buffer_for_pixmap ()
at hw/xwayland/xwayland-glamor-gbm.c:248
#1 xwl_window_post_damage () at hw/xwayland/xwayland.c:697
#2 xwl_display_post_damage () at hw/xwayland/xwayland.c:759
#3 block_handler () at hw/xwayland/xwayland.c:890
#4 BlockHandler () at dix/dixutils.c:388
#5 WaitForSomething () at os/WaitFor.c:201
#6 Dispatch () at dix/dispatch.c:421
#7 dix_main () at dix/main.c:276
#8 __libc_start_main () at ../csu/libc-start.c:308
#9 _start ()
(gdb) print xwl_pixmap
$1 = (struct xwl_pixmap *) 0x0
Make sure we check for `xwl_pixmap_get()` returned value where relevant
and fail gracefully if this is the case.
See also: https://gitlab.gnome.org/GNOME/mutter/issues/340
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marco Trevisan <mail@3v1n0.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
`xwl_present_timer_callback()` is initially marked a private and later
implemented as public.
Let's keep that private, shall we.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
0a9415cf apparently can tickle bugs in the GL stack where glGetString
returns NULL, presumably because the eglMakeCurrent() didn't manage to
actually install a dispatch table and you're hitting a stub function.
That's clearly not our bug, but if it happens we should at least not
crash. Notice this case and fail gently.
Signed-off-by: Adam Jackson <ajax@redhat.com>
wl_drm's protocol "device" event provides the path to the DRM device,
which may not be a render node, thus causing Xwayland to fall back to
DRM authentication which may fail if the user has switched to another
VT while Xwayland is starting.
Search for a render node corresponding to the given DRM device and try
to use it instead, as render nodes do not need DRM authentication and
Xwayland can make use of them if it can find one.
Closes: https://bugs.freedesktop.org/108038
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
These are so close to identical that most DDXes implement one in terms
of the other. All the relevant cases can be distinguished by the error
code, so merge the functions together to make things simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Mesa started supporting GL_OES_EGL_image on llvmpipe in 17.3, after this
commit:
commit bbdeddd5fd0b797e1e281f058338b3da4d98029d
Author: Gurchetan Singh <gurchetansingh@chromium.org>
Date: Tue Aug 1 14:49:33 2017 -0700
st/dri: add drisw image extension
That's pretty cool, but it means glamor now thinks it can initialize on
llvmpipe. This is almost certainly not what anyone wants, as glamor on
llvmpipe is pretty much uniformly slower than fb.
This fixes both Xorg and Xwayland to refuse glamor in such a setup.
Xephyr is left alone, both because glamor is not the default there and
because Xephyr+glamor+llvmpipe is one of the easier ways to get xts to
exercise glamor.
The (very small) downside of this change is that you lose DRI3 support.
This wouldn't have helped you very much (since an lp glamor blit is
slower than a pixman blit), but it would eliminate the PutImage overhead
for llvmpipe's glXSwapBuffers. A future change should add DRI3 support
for the fb-only case.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Xwayland's `xwl_destroy_window()` invokes `xwl_present_cleanup()`
before the common `DestroyWindow()`.
But then `DestroyWindow()` calls `present_destroy_window()` which will
possibly end up in `xwl_present_abort_vblank()` which will try to access
data that was previously freed by `xwl_present_cleanup()`:
Invalid read of size 8
at 0x434184: xwl_present_abort_vblank (xwayland-present.c:378)
by 0x53785B: present_wnmd_abort_vblank (present_wnmd.c:651)
by 0x53695A: present_free_window_vblank (present_screen.c:87)
by 0x53695A: present_destroy_window (present_screen.c:152)
by 0x42A90D: xwl_destroy_window (xwayland.c:653)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
Address 0x182abde0 is 80 bytes inside a block of size 112 free'd
at 0x4C2FDAC: free (vg_replace_malloc.c:530)
by 0x42A937: xwl_destroy_window (xwayland.c:647)
by 0x584298: compDestroyWindow (compwindow.c:613)
by 0x53CEE3: damageDestroyWindow (damage.c:1570)
by 0x4F1BB8: DbeDestroyWindow (dbe.c:1326)
by 0x46F7F6: FreeWindowResources (window.c:1031)
by 0x472847: DeleteWindow (window.c:1099)
by 0x46B54C: doFreeResource (resource.c:880)
by 0x46C706: FreeClientResources (resource.c:1146)
by 0x446ADE: CloseDownClient (dispatch.c:3473)
by 0x446DA5: ProcKillClient (dispatch.c:3279)
by 0x4476AF: Dispatch (dispatch.c:479)
Block was alloc'd at
at 0x4C30B06: calloc (vg_replace_malloc.c:711)
by 0x433F46: xwl_present_window_get_priv (xwayland-present.c:54)
by 0x434228: xwl_present_get_crtc (xwayland-present.c:302)
by 0x539728: proc_present_query_capabilities (present_request.c:227)
by 0x4476AF: Dispatch (dispatch.c:479)
by 0x44B5B5: dix_main (main.c:276)
by 0x75F611A: (below main) (libc-start.c:308)
This is because `xwl_present_cleanup()` frees the memory but does not
remove it from the window's privates, and `xwl_present_abort_vblank()`
will still find it and hence try to access that freed memory...
Remove `xwl_present_window` from window's privates on cleanup so that no
other function can find and reuse that data once it's freed.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1616269
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_output->randr_crtc is used in the update_screen_size() function :
==5331== Invalid read of size 4
==5331== at 0x15263D: update_screen_size (xwayland-output.c:190)
==5331== by 0x152C48: xwl_output_remove (xwayland-output.c:413)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
==5331== by 0x27574B: Dispatch (dispatch.c:421)
==5331== by 0x279945: dix_main (main.c:276)
==5331== Address 0x1aacb5f4 is 36 bytes inside a block of size 154 free'd
==5331== at 0x48369EB: free (vg_replace_malloc.c:530)
==5331== by 0x1F8AE8: RROutputDestroyResource (rroutput.c:421)
==5331== by 0x29A2AC: doFreeResource (resource.c:880)
==5331== by 0x29AE5B: FreeResource (resource.c:910)
==5331== by 0x152BE0: xwl_output_remove (xwayland-output.c:408)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== Block was alloc'd at
==5331== at 0x48357BF: malloc (vg_replace_malloc.c:299)
==5331== by 0x1F93E0: RROutputCreate (rroutput.c:83)
==5331== by 0x152A75: xwl_output_create (xwayland-output.c:361)
==5331== by 0x14BE59: registry_global (xwayland.c:764)
==5331== by 0x6570FCD: ffi_call_unix64 (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x657093E: ffi_call (in /usr/lib/x86_64-linux-gnu/libffi.so.6.0.4)
==5331== by 0x4DDB183: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD79D8: ??? (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x4DD8EA3: wl_display_dispatch_queue_pending (in /usr/lib/x86_64-linux-gnu/libwayland-client.so.0.3.0)
==5331== by 0x14BCCA: xwl_read_events (xwayland.c:814)
==5331== by 0x2AC0D0: ospoll_wait (ospoll.c:651)
==5331== by 0x2A5322: WaitForSomething (WaitFor.c:208)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This prevents multiple scroll events happening for wayland compositors
which send axis values other than 10. For example, libinput will
typically return 15 for each scroll wheel step, and if a wayland
compositor sends those to xwayland without normalising them, 2 scroll
wheel steps will end up as 3 xorg scroll events. By listening for the
discrete_axis event, this will now correctly send only 2 xorg scroll
events.
The wayland protocol gurantees that there will always be an axis event
following an axis_discrete event. However, it does not gurantee that
other events (including other axis_discrete+axis pairs) will not happen
in between them. So we must keep a list of outstanding axis_discrete
events.
Signed-off-by: Scott Anderson <scott@anderso.nz>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
glamor_fds_from_pixmap() will bail out early if DRI3 is not enabled,
unfortunately Xwayland's glamor code would not set it as enabled which
would lead to blank pixmaps when using texture from pixmap.
Make sure to mark DRI3 as enabled from glamor_egl_screen_init() in
Xwayland.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107287
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The logical size is the size of the output in the global compositor
space. The mode width/height should be scaled as in the logical
size, but shouldn't be transformed. Thus we need to rotate back
the logical size to be able to use it as the mode width/height.
This fixes issues with pointer input on transformed outputs.
Signed-Off-By: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When support for allocating GBM BOs with modifiers was added,
glamor_fd_from_pixmap() was changed so that it would return an error if
it got a bo with modifiers set from glamor_fds_from_pixmap(). The
problem is that on systems that support BOs with modifiers,
glamor_fds_from_pixmap() will always return BOs with modifiers.
This means that glamor_fd_from_pixmap() was broken entirely, which broke
a number of other things including glamor_shareable_fd_from_pixmap(),
which meant that modesetting using multiple GPUs with the modesetting
DDX was also broken. Easy reproducer:
- Find a laptop with DRI prime that has outputs connected to the
dedicated GPU and integrated GPU
- Try to enable one display on each using the modesetting DDX
- Fail
Since there isn't a way to ask for no modifiers from
glamor_fds_from_pixmap, we create a shared _glamor_fds_from_pixmap()
function used by both glamor_fds_from_pixmap() and
glamor_fd_from_pixmap() that calls down to the appropriate
glamor_egl_fd*_from_pixmap() function.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Fixes: c8c276c956 ("glamor: Implement PixmapFromBuffers and BuffersFromPixmap")
The API init_wl_registry() and has_wl_interfaces() are marked as being
optional, but both GBM And EGLStream backends implement them so there is
point in keeping those optional.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
When retrieving the Wayland buffer from a pixmap, if the buffer already
exists, the GBM backend will return that existing buffer.
However, as seen with the Present issues, if the call had previously
passed a wrong size, that buffer will remain at the wrong size for as
long as the buffer exists, which is error prone.
Considering that the width/height passed to get_wl_buffer() is always the
actual pixmap drawable size, and considering that the EGLStream backend
makes no use of the size either, there is really no point in passing the
width/height around.
Simplify the xwl_glamor_pixmap_get_wl_buffer() and EGL backends API by
removing the pixmap size, and use the drawable size instead.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
xwl_glamor_eglstream_init_egl() uses "EGL_IMG_context_priority"
extension, make sure it's actually available before using it.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Now that we have separate backends for EGLStream and GBM, we can
explicitly check for the EGLStream backend to disable present support
in that case.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
To be able to check for availability of the Wayland interfaces required
to run a given EGL backend (either GBM or EGLStream for now), we need
to have each backend structures and vfuncs in place before we enter the
Wayland registry dance.
That basically means that we should init all backends at first, connect
to the Wayland compositor and query the available interfaces and then
decide which backend is available and should be used (or none if either
the Wayland interfaces or the EGL extensions are not available).
For this purpose, hold an egl_backend struct for each backend we are to
consider prior to connect to the Wayland display so that, when we get to
query the Wayland interfaces, everything is in place for each backend to
handle the various Wayland interfaces.
Eventually, when we need to chose which EGL backend to use for glamor,
the available Wayland interfaces and EGL extensions available are all
known to Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Move EGL backends initialization to its own function in
xwayland-glamor.c
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Introduces a new egl_backend function to let the EGL backend check for
the presence of the required Wayland interfaces.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
EGL backend availability requires both EGL extensions and Wayland
interfaces to be present, so we will need to consider multiple backends
during initialization.
As a preliminary work, move the egl_backend to its own struct so that we
can have more than one backend at any given time.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
If using a render node, we can skip DRM authentication.
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Surely, we should fail to init GBM backend if "GL_OES_EGL_image" is
missing.
This seems to have been lost with commit 1545e2dba ("xwayland: Decouple
GBM from glamor").
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Both xwl_glamor_init_wl_registry() and the Wayland global registry
handler use the interface id/name in that order, using name/id in the
egl_backend vfunc makes things confusing and error prone.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Functions such as:
xwl_glamor_egl_supports_device_probing()
xwl_glamor_egl_get_devices()
xwl_glamor_egl_device_has_egl_extensions()
Are of no use outside of EGLStream support, move them to the relevant
source file.
Similarly, the other glamor functions such as:
xwl_glamor_init()
xwl_screen_set_drm_interface()
xwl_screen_set_dmabuf_interface()
xwl_glamor_pixmap_get_wl_buffer()
xwl_glamor_init_wl_registry()
xwl_glamor_post_damage()
xwl_glamor_allow_commits()
xwl_glamor_egl_make_current()
Are useless without glamor support enabled, move those within a
a "#ifdef XWL_HAS_GLAMOR" in xwayland.h
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Make xwl_output_get_xdg_output() private, it doesn't need to be
available elsewhere.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
EGLStream requires glamor, but the opposite is not true. So if someone
passes "-eglstream" with a GPU which does not support EGLStream, we
could maybe still try GBM and be lucky.
That allows Wayland compositors to pass "-eglstream" regardless of the
actual hardware, if they want to enable EGLStream on GPU which support
it.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
eglQueryDevicesEXT() would abort if the required extensions are not
available, meaning that enabling “-eglstream” on a non-EGLStream
capable hardware would lead to an abort().
Check that "EGL_EXT_device_base" extension is available and bail out
early if not, so we don't abort() later in eglQueryDevicesEXT().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Michel Dänzer
Olivier Fourdan
Dor Askayo
Adam Jackson
Hans de Goede
Robert Mader
Sven Joachim
Jonas Ådahl
Carlos Garnacho
Simon Ser
Fabrice Fontaine
Michel Dänzer
Alan Coopersmith
Roman Gilg
Peter Hutterer
Lionel Landwerlin
Scott Anderson
Lyude Paul