Now that our CVT function is able to deal with non-standard modes, we
can safely use it for the fixed mode as well.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, Xwayland uses libxcvt to generate the mode info and then
passes that to RRModeGet() to generate a RRMode.
However, libxcvt may round down the width to match the horizontal
granularity (8), and that's a problem when the Wayland compositor is
running a non-standard size (like, e.g. running nested with a custom
size) because XRandR would report a width smaller than the actual size.
To avoid that, check whether the CVT computed size differs from the
expected size, and fallback to a simpler computation not doing any
rounding if that's the case.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1540
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Compositors may use XWAYLAND_ALLOW_COMMITS to communicate when Xwayland
may or may not commit new buffers to a wl_surface. If commits are
denied, then later allowed, we'll only get a buffer attached if there is
actual damage posted, which might be long after.
This fixes an issue where the window manager would reparent a window
while denying commits, then after reparenting, allow commits. The window
in question belonged to a game and took several seconds produce the next
frame, resulting in an empty window appearing as if it had just
disappeared.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
If the format and modifiers are from a tranche which supports scanout,
we can set the corresponding flag to gbm_bo_create_with_modifiers2() to
benefit from scanout buffers where applicable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Add a new API similar to xwl_glamor_get_drawable_modifiers() but also
returning whether the format and modifiers are from a tranche which
supports scanout.
This is preparation work for adding scanout support with
gbm_bo_create_with_modifiers2() when supported.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This allows us to pass flags to the function, avoiding the forced
implicit GBM_BO_USE_SCANOUT which happens with the older version.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The present code in Xwayland cannot be used without GBM, so if GBM is
not available (or too old), the build would fail.
Make sure we do not use the present code without GBM support.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The Wayland library may log warnings, we do not need to make that fatal
to the Xserver.
By killing the Xserver whenever a warning is raised, we hide other log
messages that might be also interesting.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Whenever the linux-dmabuf v4 feedback changes, we need to recreate the
existing buffers so they use the current linux-dmabuf v4 feedback.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
When creating the window buffer's backing pixmap, try the Xwayland
glamor hook first and fallback to the regular CreatePixmap() code path
otherwise.
That allows to enable direct scanout if possible, either through the
regular dmabuf v4 code path, or from the implicit fallback code path.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Before linux_dmabuf v4 support was added, the BO were created using
gbm_bo_create_with_modifiers() which incidentally creates scanout
capable buffers.
We now need to replicate that explicitly when using the fallback path,
with buffers window, otherwise direct scanout will not be possible in
that case.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1535
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Add the implementation for create_pixmap_for_window() in the GBM glamor
backend.
To do so, we just rename the existing xwl_glamor_gbm_create_pixmap() as
internal and add an optional drawable parameter, so that it can be used
either from the regular CreatePixmap code path, or from the new direct
Xwayland glamor's hook.
v2: Fallback to xwl_glamor_get_modifiers() if
xwl_glamor_get_drawable_modifiers() returned 0 modifiers. (Michel)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
With linux dmabuf v4 support, for direct scanout support, we need more
context that just what CreatePixmap() provides, as we need the actual
drawable to invoke xwl_glamor_get_drawable_modifiers().
Add a specific hook in Xwayland's glamor implementation that we can use
for that purpose.
This is preparation work for the direct scanout fixes.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
With implicit modifiers, DRM_FORMAT_MOD_INVALID is an allowed modifier,
to indicate that the server can support the format.
When looking for a scanout capable tranche with implicit modifiers, we
ought to check for the availability of a tranche with an invalid
modifier for the given format.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
The helper function xwl_feedback_is_modifier_supported() walks all the
formats of a feeedback tranche and checks for format/modifier support
availability.
Add scanout support to that so that a caller can easily restrict the
tranches to those which support scanout.
This is preparation work for the implicit scanout support, no functional
change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Separate the callbacks for the default's feedback from the one for
regular windows.
This is preparation work to recreate the window buffer of feedback
updates, no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
It could happen with the following call path:
frame_callback
xwl_present_frame_callback
xwl_present_msc_bump
xwl_present_execute
xwl_present_flip
xwl_window_create_frame_callback
The nested loop called xwl_present_reset_timer, which may end up calling
xorg_list_del for the entry after the one frame_callback started the
chain for. This resulted in the outer loop never terminating, because
its next element wasn't hooked up to the list anymore.
We avoid this by calling xwl_present_reset_timer as needed in
frame_callback, and bailing from xwl_window_create_frame_callback if it
was called from the former.
We also catch nested calls and FatalError if they ever happen again due
to another bug.
v2:
* Leave xwl_present_reset_timer call in xwl_present_frame_callback,
needed if xwl_present_msc_bump didn't hook up the window to the frame
callback list again.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1442
Commit 3c07a01c4 (xwayland: Use xdg-output name for XRandR) changed the
logic to use a fixed sized buffer allocated on the stack to pass to
RROutputCreate() which would then copy it.
Valgrind complains about this:
== Conditional jump or move depends on uninitialised value(s)
== at 0x49954B: MakeAtom (atom.c:87)
== by 0x5108B3: RRMonitorCrtcName (rrmonitor.c:33)
== by 0x510BBB: RRMonitorSetFromServer (rrmonitor.c:92)
== by 0x511882: RRMonitorMakeList (rrmonitor.c:373)
== by 0x512175: ProcRRGetMonitors (rrmonitor.c:634)
== by 0x508091: ProcRRDispatch (randr.c:748)
== by 0x4A860E: Dispatch (dispatch.c:546)
== by 0x4B692F: dix_main (main.c:271)
== by 0x431C90: main (stubmain.c:34)
== Uninitialised value was created by a stack allocation
== at 0x42122C: xwl_output_create (xwayland-output.c:816)
This is actually harmless, but also simple to avoid by just initializing
the content of the array with zeros, so let's just fix that.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: commit 3c07a01c4 - xwayland: Use xdg-output name for XRandR
If we allocated with implicit modifiers, then we shouldn't use the
modifier returned by gbm_bo when checking whether the modifier is
supported or not, since it won't be if the compositor only advertises
implicit modifiers, nor should we use the modifier when creating the
Wayland buffer object, as it wasn't explicitly advertised.
Fixes: c6f2598a4 ("xwayland: don't fall back to wl_drm with explicit modifier")
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
If we're using implicit modifiers, we'll pass NULL and zero modifiers.
Lets just use the legacy API directly instead.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
The linux_dmabuf_v1 protocol doesn't guarantee any DRM node type:
the compositor may send a primary node or a render node. Use
drmDevice so that device comparisons are node-type-insensitive.
Signed-off-by: Simon Ser <contact@emersion.fr>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1447
With wl_pointer.axis_v120 support, the wl_seat supported version has
been bumped to 8, but Xwayland is still using MAP_SHARED which is
prohibited, wl_seat version 7 and above enforces the use of MAP_PRIVATE
for keymaps.
Use MAP_PRIVATE for the keymaps mmap().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1512
Fixes: 3a02f56b4 - hook up wl_pointer.axis_v120 events
It's incorrect to strip an explicit modifier. Daniels' docs [1]
states:
> when importing a buffer, the user may supply `DRM_FORMAT_MOD_INVALID` as the
> buffer modifier (or not supply a modifier) to indicate that the modifier is
> unknown for whatever reason; this is only acceptable when the buffer has
> not been allocated with an explicit modifier
[1]: https://lore.kernel.org/dri-devel/20210905122742.86029-1-daniels@collabora.com/
Signed-off-by: Simon Ser <contact@emersion.fr>
When the modifier is not supported by the compositor, and the
DMA-BUF contains multiple planes, xwl_pixmap->buffer is NULL.
Avoid crashing when calling wl_buffer_add_listener().
Signed-off-by: Simon Ser <contact@emersion.fr>
With the addition of linux_dmabuf v4, the code adds dev_t in various
places but did not include <sys/types.h>.
While that works on glibc, it may fail to build on other libc
implementations such as musl libc.
Make sure to explicitly include <sys/types.h> where we use dev_t.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1445
Fixes: bddfe190de - Implement linux_dmabuf_feedback event handlers
This allows developers to setup Xwayland as a subproject of a
Wayland compositor, and have it correctly pick up the features
advertised in the dependency variables.
Signed-off-by: Simon Ser <contact@emersion.fr>
Remove the xwayland.pc.in file:
- This avoids writing down each pkg-config variable twice: once in
the Meson files to set the configuration data, once in the .pc.in
file to print it.
- We'll be able to re-use the same variables for use as a
subproject.
Signed-off-by: Simon Ser <contact@emersion.fr>
If wl_output provides us with an output name, use that as well.
If we have both xdg_output.name and wl_output.name (from version >= 4),
prefer the latter.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>#
See-also: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/189
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
With the wl_output protocol, the actual bind to the interface is done in
xwl_output_create().
Pass the version number from the registry so we can bind to the minimum
version.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, Xwayland assigns sequential output names for XRandR. When an
output is hotplugged, a new name is assigned sequentially (XWAYLAND0,
XWAYLAND1, etc.). This is a problem because if a monitor is unplugged
and plugged again, it will get a new name each time.
Luckily, xdg-output provides us with a name for the outputs.
Even though the protocol states that the name is not a reflection of the
underlying DRM connector name, it is to remain consistent across
sessions with the same hardware and software configuration.
So we could use the xdg-output name for the XRandR reported name for the
output.
Doing so is a bit tricky though, because the output name is set at
creation and is not supposed to change. The xdg-output event that
provides us with the name will come at a later time.
So we just allocate a default fixed size for the output name at creation
and just replace the default output name with the xdg-output name when
that is known.
Also, historically, some X11 clients were expecting output names in
Xwayland to be named XWAYLAND<x> and used that to check whether they
were running on Xwayland. Those clients should now use the Xwayland X11
extension which is designed specifically for that purpose.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1353
See-also: https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/954
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Since commit 204f10c2, we notify XRandR clients that the randr
configuration has changes as soon as an new output is created.
Yet, this might be premature, considering that at that point, we are
still to receive the wl_output and xdg-output events that will most
likely change the setup.
So instead of calling RRTellChanged() from xwl_output_create(), wait
until we get to call apply_output_change(), which occurs after the done
events from both xdg-output and wl_output are received.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Some drivers (e.g. AMD GFX8-) don't support explicit format
modifiers. On these drivers, gbm_bo_create_with_modifiers()
will fail. This results in "Error getting buffer" in the logs
later on with all X11 windows staying invisible.
Fallback to the modifier-less API gbm_bo_create() in that case.
Signed-off-by: Simon Ser <contact@emersion.fr>
The window might be retained in the damage list after
`xwl_screen_post_damage` in certain conditions. This means we need to
check if the window is already in the list to avoid adding the same
window twice which will lead to list corruption resulting in server freeze
in `xwl_screen_post_damage`.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
With Wayland 1.21 being our baseline, we do not need to compile
wl_pointer.axis_v120 conditionally.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
With libdecor, when the state changes (in the configure handler), we
need to commit the libdecor frame but also the wl_surface, otherwise
the surface is left in a uncommitted state until a wl_surface commit
eventually occurs later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: c74c6add3e - xwayland: add optional support for libdecor
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
If the dmabuf protocol's feedback object gave us a new list of
modifiers, send PresentCompleteModeSuboptimalCopy to the client
to inform them that they need to call GetSupportedModifiers.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This adds to xwl_glamor_is_modifier_supported, where if feedback
is in use we will check that the format/mod is allowed in any
device advertised by the compositor.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Move dev_formats declaration to where it's used in
xwl_feedback_is_modifier_supported
* Add curly braces around multi-line statement in
xwl_glamor_is_modifier_supported ]
If protocol version 4 of linux_dmabuf is in use, then the compositor
may not return anything with the modifiers event. We instead
will return the formats/mods reported for the main device.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Move main_dev declaration to where it's used in
xwl_glamor_get_formats
* Add empty line between variable declaration and comment ]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Sort protocol #includes lexically.
* memcpy to &xwl_feedback->main_dev directly in
xwl_dmabuf_feedback_main_device. ]
This creates xwl_add_format_and_mod_to_list, which is a helper
that adds a format/mod combo to a xwl_format* list. This will
be used by both the modifier event handling and the tranche
format handling.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Olivier Fourdan
Jonas Ådahl
Simon Ser
Michel Dänzer
Minh Phan
Austin Shafer