If atomic modesetting is to be enabled in the configuration file, log
whether this is supported and eventually enabled or disabled.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
The modesetting driver has atomic modesetting disabled by default but
can be enabled (if supported) using a configuration option.
Add this option in the man page.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This adds support for TearFree page flips to eliminate tearing without the
use of a compositor. It allocates two shadow buffers for each CRTC, a back
buffer and a front buffer, and uses damage tracking to minimize excessive
copying between buffers and skip unnecessary flips when the screen's
contents remain unchanged. It works on transformed screens too, such as
rotated and scaled CRTCs.
When PageFlip is enabled, TearFree won't force fullscreen DRI clients to
synchronize their page flips to the vblank interval.
TearFree is disabled by default.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
The DRM event queue in the kernel is quite small and can be easily
exhausted by DRI clients. When the event queue is full, that means nothing
can be queued onto it anymore, which can lead to incorrect presentation
times for DRI clients and failure when attempting to queue a page flip.
To make matters worse, once an event is placed onto the kernel's event
queue, there's no straightforward way to prematurely remove it from the
kernel's event queue in userspace, which means that aborting a sequence
number doesn't free up space in the event queue.
Since vblank events from DRI clients are the largest consumers of the
event queue, and since it's often easy to know the desired target MSC of
their vblank events without querying the kernel for a CRTC's current MSC,
we can coalesce vblank events occurring at the same MSC such that only one
of them is placed onto the kernel's event queue, instead of allowing
duplicate vblank events to pollute the event queue.
This is achieved by tracking the next kernel-queued event's MSC on a
per-CRTC basis and then running all of that CRTC's vblank event handlers
which have reached their target MSC when the queued MSC is signaled.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
do_queue_flip_on_crtc() is about to be used to flip buffers other than the
primary scanout (`ms->drmmode.fb_id`), so make it generic to accept any
frame buffer ID, as well as x and y coordinates in the frame buffer, to
flip on a given CRTC. Move the retry logic from queue_flip_on_crtc() into
it as well, so that it's robust for all callers.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Shadow buffers are about to be used for TearFree, so make the shadow buffer
helpers generic such that they can be used to create arbitrary per-CRTC
shadows aside from just the per-CRTC rotated buffer.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
xf86RotateCrtcRedisplay() is about to be used outside of xf86Rotate.c in
order to copy transformed pixmaps, so fix up its interface by specifying
the source drawable and destination pixmap rather than assuming the root
drawable and rotated pixmap, respectively. In addition, add an argument to
make xf86RotateCrtcRedisplay() not perform any transformations, which is an
indicator that it should only copy a transformed pixmap rather than
actually transform a pixmap.
These changes make it possible to use xf86RotateCrtcRedisplay() to not
only copy transformed pixmaps, but also actually transform pixmaps, making
it very useful outside of xf86Rotate.c.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Updated the for-loop that iterates over the received EGLConfigs to
include the very first EGLConfig with index 0.
Signed-off-by: Doğukan Korkmaztürk <dkorkmazturk@nvidia.com>
Fixes: 8469241592 - xwayland: Add EGL-backed GLX provider
The virgl driver exposes the name of the host renderer which might be llvmpipe.
In this case we still need glamor to be initialized.
Only check if the renderer starts with llvmpipe (which is what llvmpipe exposes).
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The current X server infrastructure sets modesetting driver as default driver
to handle PCI-hotplug of a GPU device. This prevents the respective DDX driver
(like AMDGPU DDX driver) to take control of the card.
This patch:
- Adds a few functions and fine-tunes the GPU hotplug infrastructure to allow
the DDX driver to be loaded, if it is configured in the X config file
options as "hotplug-driver".
- Scans and updates the PCI device list before adding the new GPU device
in platform, so that the association of the platform device and PCI device
is in place (dev->pdev).
- Adds documentation of this new option
An example usage in the config file would look like:
Section "OutputClass"
Identifier "AMDgpu"
MatchDriver "amdgpu"
Driver "amdgpu"
HotplugDriver "amdgpu"
EndSection
V2:
Fixed typo in commit message (Martin)
Added R-B from Adam.
Added ACK from Alex and Martin.
V3:
Added an output class based approach for finding the DDX driver (Aaron)
Rebase
V4:
Addressed review comment from Aaron:
GPU hot-plug handling driver's name to be read from the DDX config file options.
In this way only the DDX drivers interested in handling GPU hot-plug will be
picked and loaded, for others modesetting driver will be used as usual.
V5:
Addressed review comments from Aaron:
- X config option to be listed in CamelCase.
- Indentation fix at one place.
- Code readability related optimization.
V6:
Addressed review comments from Aaron:
- Squash the doc in the same patch
- Doc formatting changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Aaron Plattner aplattner@nvidia.com (v3)
Acked-by: Martin Roukala martin.roukala@mupuf.org(v1)
Acked-by: Alex Deucher alexander.deucher@amd.com (v1)
Reviewed-by: Adam Jackson ajax@redhat.com(v1)
Signed-off-by: Shashank Sharma shashank.sharma@amd.com
Current error:
ld: error: undefined symbol: xf86EnableIO
>>> referenced by xf86Configure.c
>>> libxorg_common.a.p/xf86Configure.c.o:(DoConfigure) in archive hw/xfree86/common/libxorg_common.a
>>> referenced by xf86Events.c
>>> libxorg_common.a.p/xf86Events.c.o:(xf86VTEnter) in archive hw/xfree86/common/libxorg_common.a
>>> referenced by xf86Init.c
>>> libxorg_common.a.p/xf86Init.c.o:(InitOutput) in archive hw/xfree86/common/libxorg_common.a
>>> referenced 1 more times
Commit 8a5f3ddb2 ("set tag on our surface") introduced the use of tags
to differentiate our own surfaces, and commit a1d14aa8c ("Clear the
"xwl-window" tag on unrealize") removed the tags before the surfaces are
actually destroyed.
Xwayland would then rely on these tags on the surface to decide whether
to ignore or to process the Wayland event in various places.
However, in doing so, it also checked for the tag on keyboard leave
events.
As a result, if the keyboard leave events is received after the X11
window is unrealized, keyboard_handle_leave() would not queue the
LeaveNotify events for the DIX to proceed, and the key repeat would
kick in and repeat the key event indefinitely.
To avoid the issue, process events regardless of the tag as before
in keyboard_handle_leave().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 8a5f3ddb2 - "xwayland: set tag on our surface"
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1395
Tested-by: Renan Guilherme Lebre Ramos <japareaggae@gmail.com>
Tested-by: Stefan Dirsch <sndirsch@suse.de>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Multiplanar GBM buffers can point to different objects from each plane.
Use the _for_plane API when possible to retrieve the correct prime FD
for each plane.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Tested-by: Guido Günther <agx@sigxcpu.org>
Check the fd for validity before giving a success return code.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Tested-by: Guido Günther <agx@sigxcpu.org>
Now that we keep the Wayland surface around for longer than the
xwl_window, we might get events for that surface after the X11 window
is unrealized.
Make sure we untag the Wayland surface when the Wayland surface is
delayed, to break the wl_surface/xwl_window relationship, so that events
for that surface are discarded by Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Fixes: e37f18ee9 - xwayland: Delay wl_surface destruction
a77d95af61 intended to do this, but the
check for “is this rootless or rootful XWayland” was inverted.
Fixes: a77d95af61 ("xwayland: Prevent Xserver grabs with rootless")
Signed-off-by: Demi Marie Obenour <demiobenour@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
hw/xwayland/xwayland.c:306:10: fatal error: 'X11/extensions/xwaylandproto.h' file not found
#include <X11/extensions/xwaylandproto.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 2700bc6045 ("xwayland: add support for the XWAYLAND extension")
X11 and Wayland requests are unordered, causing a race in the X11 window
and wl_surface association.
To mitigate that race, delay the wl_surface destruction by 1 second,
so that the compositor has time to establish the association before the
wl_surface is destroyed: to see both the wl_surface created and the
WL_SURFACE_ID X11 property set.
This is only a mitigation though, a more robust solution requires a
future dedicated Wayland protocol.
v2: Clean up pending wl_surface destroy on exit as well.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1157
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Joshua Ashton <joshua@froggi.es>
Tested-by: Sterophonick <sterophonick@gmail.com>
See-also: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/163
Changes check for trying modesetting driver from if defined(__linux__)
to use meson check for if we built the driver for this platform.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Because of the design of most Wayland compositors, where the compositor
is both a Wayland server and an X11 window manager, any X11 client
issuing a server grab (i.e. XGrabServer()) can possibly hang the whole
desktop when Xwayland is running rootless.
This can happen with e.g. ImageMagick's import command with mutter.
1. "import" is launched and issues an XServerGrab(),
2. Xwayland restricts access to that "import" X11 client alone,
3. mutter continues to process events until it needs to sync with
Xwayland (there's variability in time before the hang occurs),
4. When mutter does an XSync() (explicitly or implicitly through some
other Xlib call), it will stop waiting for Xwayland to reply,
5. Xwayland waits for the XServerGrab() to be released by import,
6. "import" waits for a user input to release the XServerGrab(),
7. mutter is stuck waiting on Xwayland and does not process input
events...
To prevent this, re-route the GrabServer/UngrabServer requests and
pretend the grab works but actually does nothing at all for all clients
but the X11 window manager (which can still issue X11 server grabs, at
its own risks).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Closes: https://bugzilla.redhat.com/1914021
I wanted to simplify the logic, and thought this is a good opportunity
to eliminate local diffs.
I don't want to list OSes without wsfb, because I understand that is a
netbsd/openbsd driver, and always have it as a fallback for us.
Additionally, I understand "fbdev" is linux-specific, so have the logic
match this intent.
Fixes accidentally taking the WL_POINTER_AXIS_HORIZONTAL_SCROLL case as
well after the WL_POINTER_AXIS_VERTICAL_SCROLL case, which resulted in
vertical wheel events triggering both vertical and horizontal scrolling.
Fixes: e37eeb7af2 ("xwayland: Aggregate scroll axis events to fix kinetic scrolling")
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1367
This extension exists to serve one purpose: reliably identifying
Xwayland. Previous attempts at doing so included querying root window
properties, output names or input device names. All these attempts are
somewhat unreliable. Instead, let's use an extension - where that
extension is present we have an Xwayland server.
Clients should never need to do anything but check whether the extension
exists through XQueryExtension or search through XListExtensions.
This extension provides a single QueryVersion request only, and
that is only to provide future compatibility if we ever need anything
other than "this extension exists" functionality.
https://gitlab.freedesktop.org/xorg/proto/xorgproto/-/merge_requests/54
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not that it actually matters since the typedef is int32_t anyway, but
this theoretically avoids an erroneous call to wl_fixed_to_double() on
that value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 7cdcdfea0 introduced a new command line option
"-force-xrandr-emulation", however it is missing from the
ddxProcessArgument().
As a result, trying to use that command option would result in a error:
(EE) Unrecognized option: -force-xrandr-emulation
Make sure "-force-xrandr-emulation" is accounted for in Xwayland's
ddxProcessArgument().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 7cdcdfea0 - xwayland: Add -force-xrandr-emulation switch
Pointer scroll events are collected in xwl_seat->pending_pointer_event
as they are received in the pointer_handle_axis and
pointer_handle_axis_discrete callbacks. They are dispatched together as a
single event when pointer_handle_frame is called which "Indicates the end of a
set of events that logically belong together" [1]. This patch also sends an
event with dx=0, dy=0 when pointer_handle_axis_stop is called, which is what
allows XWayland clients to recognise the end of a touchpad scroll.
[1] https://wayland.app/protocols/wayland#wl_pointer:event:frame
Signed-off-by: David Jacewicz <david.jacewicz27@protonmail.com>
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/926
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When running rootful, the Xwayland window is not decorated (as all
Wayland surfaces), which makes it quite inconvenient to move on screen.
libdecor is "a client-side decorations library for Wayland clients"
which can be used precisely for adding decorations to Wayland surfaces.
Add optional support for libdecor in Xwayland to gain decorations when
running rootful and a new command line option "-decorate".
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1332
That allows to differentiate Xwayland's own surfaces from others.
This is preparation work for optional libdecor support.
v2: Check for surface not being NULL (Jonas Ådahl <jadahl@gmail.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The app_id is used to identify applications (and group windows), some
desktops (such as GNOME Shell) use it in their top bar.
Set the XDG toplevel "app_id" to "org.freedesktop.Xwayland" and install
a desktop file for Xwayland rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
So that when running rootful, the compositor can close the Xwayland
window using the xdg-toplevel protocol.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Set a meaningful title for the xdg_surface, it's nicer when running
rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Currently, when running rootful, the toplevel root surface is created in
the same function as the rest of the Wayland surfaces.
Move it to its own function to improve readability - No function change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a new command line option "-host-grab" to disable the keyboard
shortcuts and confine the pointer on the host so that Xwayland can
receive all keyboard events.
This is useful when running a complete desktop environment within
Xwayland rootful.
Use [CTRL]+[SHIFT] to release the keyboard and pointer.
This option is not compatible with rootless mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland tries to be smart and guess the intention of the X11 clients
sometimes, like issuing a pointer lock when a client hides the pointer
when confined.
While this is a good thing when running rootless, this is problematic
when running rootful as the pointer will be automatically locked unless
the "retro" mode is used (which doesn't hide the cursor, unlike the
default).
Make sure we don't trigger the automatic pointer lock when the cursor is
hidden when running rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a new command line option "-fullscreen" to make the rootful Xwayland
window appear fullscreen.
This requires viewport support in the compositor and when used with
"-geometry" can emulate the full range of XRandR resolutions.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When updating the overall screen size, Xwayland would first walk the
window tree then update both the xwl_screen and screen size.
As a result, if any ResizeWindow() handler tries to use the xwl_screen
size, it would get the old (wrong) size instead of the new one.
Make sure to update the xwl_screen size first, prior to traverse the
window tree.
This is preparation work for Xwayland fullscreen mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When using xrandr emulation, the emulated mode is passed as a pointer to
the XRandR mode from the xwl_output associated with the X11 client.
In preparation for fullscreen mode, we want to be able to reuse that
code but use a separate emulated mode.
Simply change the internal API to pass a reference to the emulated mode.
This introduces no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The xdg_toplevel object was used solely when creating the window
surface, and the value of the object discarded.
To be able to make the surface fullscreen using the xdg_toplevel
protocol, we need to have access that object, so keep it around along
with the xwl_window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of the output the surface enters/leaves.
This is fairly basic tracking though, we do not keep a full list of
outputs a surface may be covering partially, we just keep the output
the surface entered last.
This is sufficient as a preparation work for fullscreen though.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a convenient function to get the xwl_output from a given wl_output.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When running rootless as well as rootful, Xwayland gets its outputs
configuration from the Wayland compositor.
When running rootful, it means that we end up with a large black
surface the size of all monitors combined, that's not very convenient
and there is no way for set the desired size of the Xwayland window.
Add a new command line option "-geometry" to force a specific mode when
running rootful for the user to specify the root window size to use for
Xwayland.
That option has no effect when Xwayland is running rootless.
v2: Not using libxcvt as the mode may not be a valid CVT mode.
v3: Add a set of XRandR modes and the RR hooks to make that work.
Update the man page for Xwayland.
v4: Add RandR 1.0 support for older clients
v5: Fix XVidMode failing with a BadMatch
v6: Add a separate xwl_output specifically for fixed mode, instead of
using the existing output list - that will allow for further
improvements like a fullscreen mode eventually.
v7: Sort the RR modes
v8: Fix RandR 1.0
v9: Add physical size
v10: Cleanup
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1338
Jeremy Huddleston Sequoia
Olivier Fourdan
Sultan Alsawaf
John D Pell
Doğukan Korkmaztürk
Corentin Noël
Shashank Sharma
pkubaj
Lucas Stach
Demi Marie Obenour
Jan Beich
Alan Coopersmith
coypu@sdf.org
Michel Dänzer
Peter Hutterer
David Jacewicz