For details on the protocol itself see the Wayland merge request:
https://gitlab.freedesktop.org/wayland/wayland/-/merge_requests/72
The v120 event has a value base of 120, so one wheel detent is 120, half a
wheel is 60, etc. This is the API Windows has been using since Vista but it
requires HW support from the device. Logitech mice and many Microsoft mice of
the last decade or so have support and it's enabled in the kernel since v5.0.
The new events replace wl_pointer.axis_discrete events, once you bind to
wl_pointer >= 8 you only get the v120 events. So backwards compatibility
is simple, we just multiply the discrete events if we get them and
treat everything as 120 event internally.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This will allow us to remove build-time conditionalization on COMPOSITE
while still allowing XQuartz to disable it and use ROOTLESS.
This reverts commit 9c03733669.
Implements the xwayland_shell protocol which makes the surface
association happen via a shared serial, rather than sharing a wl_surface
resource ID across an X atom.
This solves a race that can happen if the wl_surface
associated with a WL_SURFACE_ID for a window was destroyed before the
update of the atom was processed by the compositor and another surface
(or other object) had taken its id due to recycling.
Closes: #1157
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
The only reason we still depend on xorg/font/utils is because we pull a
pkgconfig variable from that .pc file. Let's drop that dependency by
providing that option ourselves.
And where the option isn't specified and font-utils isn't found, default
to $datadir/fonts/X11, same path it's always been.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Current error:
ld: error: undefined symbol: xf86EnableIO
>>> referenced by xf86Configure.c
>>> libxorg_common.a.p/xf86Configure.c.o:(DoConfigure) in archive hw/xfree86/common/libxorg_common.a
>>> referenced by xf86Events.c
>>> libxorg_common.a.p/xf86Events.c.o:(xf86VTEnter) in archive hw/xfree86/common/libxorg_common.a
>>> referenced by xf86Init.c
>>> libxorg_common.a.p/xf86Init.c.o:(InitOutput) in archive hw/xfree86/common/libxorg_common.a
>>> referenced 1 more times
Xwayland uses API such as wl_proxy_set_tag()/wl_proxy_get_tag() which
appeared in Wayland 1.18, but the build system still requires Wayland
1.5 at least.
Bump the Wayland version to match the requirements.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This extension exists to serve one purpose: reliably identifying
Xwayland. Previous attempts at doing so included querying root window
properties, output names or input device names. All these attempts are
somewhat unreliable. Instead, let's use an extension - where that
extension is present we have an Xwayland server.
Clients should never need to do anything but check whether the extension
exists through XQueryExtension or search through XListExtensions.
This extension provides a single QueryVersion request only, and
that is only to provide future compatibility if we ever need anything
other than "this extension exists" functionality.
https://gitlab.freedesktop.org/xorg/proto/xorgproto/-/merge_requests/54
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bumped in response to warning from meson:
WARNING: Project specifies a minimum meson_version '>= 0.47.0' but uses features which were added in newer versions:
* 0.50.0: {'install arg in configure_file'}
Even though there is no warning, we need 0.52.0 for include_type (added in 8264b51e8e8b4c193dc8324cae4f9f675cfbf172) per:
https://mesonbuild.com/Reference-manual_functions.html#arguments17
When running rootful, the Xwayland window is not decorated (as all
Wayland surfaces), which makes it quite inconvenient to move on screen.
libdecor is "a client-side decorations library for Wayland clients"
which can be used precisely for adding decorations to Wayland surfaces.
Add optional support for libdecor in Xwayland to gain decorations when
running rootful and a new command line option "-decorate".
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1332
WARNING: Project specifies a minimum meson_version '>= 0.47.0' but uses features which were added in newer versions:
* 0.50.0: {'install arg in configure_file'}
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
libxcvt is a library providing a standalone version of the X server
implementation of the VESA CVT standard timing modelines generator.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1142
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
With Wayland compositors now being able to start Xwayland on demand, the
next logical step is to be able to stop Xwayland when there is no more
need for it.
The Xserver itself is capable of terminating itself once all X11 clients
are gone, yet in a typical full session, there are a number of X11
clients running continuously (e.g. the Xsettings daemon, IBus, etc.).
Those always-running clients will prevent the Xserver from terminating,
because the actual number of X11 clients will never drop to 0. Worse,
the X11 window manager of a Wayland compositor also counts as an X11
client, hence also preventing Xwayland from stopping.
Some compositors such as mutter use the XRes extension to query the X11
clients connected, match their PID with the actual executable name and
compare those with a list of executables that can be ignored when
deciding to kill the Xserver.
But that's not just clumsy, it is also racy, because a new X11 client
might initiate a connection the X11 server right when the compositor is
about to kill it.
To solve this issue directly at the Xserver level, this add new entries
to the XFixes extension to let the X11 clients themselves specify the
disconnect mode they expect.
Typically, those X11 daemon clients would specify the disconnect mode
XFixesClientDisconnectFlagTerminate to let the Xserver know that they
should not be accounted for when checking the remaining clients prior
to terminate.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Meson has a built-in facility to use bundled versions of dependencies
if system packages are too old. Enable for xorgproto after 8e504d8b36eb:
Run-time dependency xproto found: YES 7.0.33
Run-time dependency randrproto found: YES 1.6.0
Run-time dependency renderproto found: YES 0.11.1
Run-time dependency xextproto found: YES 7.3.0
Dependency inputproto found: NO found 2.3.2 but need: '>= 2.3.99.1'
Found CMake: /usr/local/bin/cmake (3.20.2)
Run-time dependency inputproto found: NO (tried pkgconfig and cmake)
Looking for a fallback subproject for the dependency inputproto
meson.build:73:0: ERROR: Neither a subproject directory nor a xorgproto.wrap file was found.
This bumps the minimum Wayland version to 1.5 (released in 2014).
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Peres <martin.peres@mupuf.org>
Kernel modesettings support also depends on dri2, see
./hw/xfree86/drivers/modesetting/meson.build
So update meson.build to reflect the changes made in configure.ac by
commit 9c81b8f5b5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Xwayland is usually spawned by the Wayland compositor which sets the
command line options.
If a command line option is not supported, Xwayland will fail to start.
That somehow makes the Xwayland command line option sort of ABI, the
Wayland compositor need to know if a particular option is supported by
Xwayland at build time.
Also, currently, Xwayland is being installed along with the rest of the
common executable programs that users may run, which is sub-optimal
because, well, Xwayland is not a common executable program, it's meant
to be a proxy between the Wayland compositor and the legacy X11 clients
which wouldn't be able to run on Wayland otherwise.
Xwayland would be better installed in `libexec` but that directory is
(purposedly) not in the user `PATH` and therefore the Wayland compositor
may not be able to find Xwayland in that case.
To solve both problems (which options are supported by Xwayland and
where to look for it), add a `pkg-config` file specifically for Xwayland
which gives the full path to Xwayland (`xwayland`) and which options it
supports (using `pkg-config` variables).
The `pkg-config` file also provides the `Version` so the build scripts
can check for a particular version if necessary.
Obviously, Wayland compositors are not required to use the `pkg-config`
file and can continue to use whatever mechanism they deem preferable.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently glamor depends on epoxy and gbm, even the autotools build
enforces that.
Follow suite and do the same for the meson build.
v1: Split out from larger patch (Pekka)
Signed-off-by: Emil Velikov <emil.velikov@collbora.com>
There's not really a good reason to keep these separate, the vbe code
requires int10 and is not very large. This change eliminates the
build-time options for vbe; if you build int10, you get vbe.
Gitlab: https://gitlab.freedesktop.org/xorg/xserver/issues/692
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This adds support for xdg-output-unstable-v1 version 3, added in [1].
This new version deprecates zxdg_output_v1.done and replaces it with
wl_output.done. If the version is high enough, there's no need to wait for both
an xdg_output.done event and a wl_output.done event -- we only care about
wl_output.done.
[1]: 962dd53537
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When building Xwayland with neither DRI nor GLamor support enabled with
the Meson build system, the resulting binary would still link against
libdrm and epoxy even though those are not used/needed.
Make sure we require and link against libdrm and epoxy only if needed.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Some modules are required in multiple places in the meson file.
Move the actual requirements to the top of the file as a variable so
that updating a version does not require changing the actual value in
multiple places.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Differences from autotools:
* Autotools defined NO_ALLOCA for OSX builds. I don't think we need
this anymore as Xalloc.h is no longer used anywhere in the xserver.
* X11.bin is linked with -u,miDCInitialize, and then libserver_mi
provided to satisfy (just) that. It's been that way since the commit
which added it. We can't write the equivalent in meson due to linker
argument ordering issues, but do we really need to?
* An explicit -Dsecure-rpc=false is required for OSX, since in meson we
don't do the checks that XTRANS_SECURE_RPC_FLAGS did for the existence
of the specific RPC functions required.
Promote the generated file containing the date & time build was
configured to top-level.
Rename it from xf86Build.h to buildDateTIme.h.
Use it as well in XQuartz, stringize BUILD_DATE when needed.
This has always been described as 'experimental'
We don't think this has any users: This mode has been disabled in Cygwin
packages since March 2016. We've never provided the xwinwm WM for x86_64
Cygwin. No one has even asked where the option has gone.
This leaves XQuartz as the only user of the rootless extension.
Remove --enable-windowswm configure option
Remove multiwindowextwm stuff from Makefiles
Remove -mwextwm option
Remove -mwextwm from man-page and help
Un-ifdef XWIN_MULTIWINDOWEXTWM
v2:
Remove rootless include paths
Remove windowswmproto from meson.build
Applying get_pkgconfig_variable() to a not-found dependency was always
documented as an error, but meson 0.49 now actually raises an error[1]:
meson.build:110:4: ERROR: 'xkbcomp' is not a pkgconfig dependency
Check xkbcomp_dep is a suitable dependency type before applying
get_pkgconfig_variable() to it.
[1] but this is more by accident than design (see the discusssion at [2]
et seq.), so who knows where things will come to rest...
[2] https://github.com/mesonbuild/meson/pull/4444#issuecomment-442443301
We were being naughty:
WARNING: Project specifies a minimum meson_version '>= 0.42.0' but uses features which were added in newer versions:
* 0.46.0: {'compiler.has_multi_link_argument', 'compiler.has_link_argument'}
We forget to assign a value to xf86dgaproto_dep if -Ddga=false, which
causes the meson build to fail:
meson.build:448:0: ERROR: Unknown variable "xf86dgaproto_dep".
A full log can be found at /home/lyudess/build/xserver/meson-logs/meson-log.txt
FAILED: build.ninja
So, just set it to an empty dependency to fix that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Dependencies are ported from the automake build.
v2: Make it a tristate defaulting to 'auto'. Use pkg-config for libaudit.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This is silly to have optional based on detection of the protocol
headers, particularly now that we have a single protocol header repo
to install.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
paths returned by get_option('foodir') are potentially relative to prefix
Noticed when comparing manpages generated by a meson build with those
generated by an autotools build
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead, substitute the same values as autotools does
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
meson.build has code to set the module_dir variable to
${libdir}/xorg/modules if the module_dir option string is empty.
However, this has several problems:
1. The variable is only used for an unused @moduledir@ substitution in
the man page. The rule for xorg-server.pc uses option('module_dir')
directly instead.
2. The 'module_dir' option has a default value of 'xorg/modules' so the
above rule doesn't do anything by default.
3. The xorg-server.pc rule uses ${exec_prefix}/option('module_dir'), so
the effect of #2 is that the default moduledir is different between
autoconf and meson. E.g. if ${prefix} is /X, then you get
autoconf: moduledir=/X/lib/xorg/modules
meson: moduledir=/X/xorg/modules
Fix this by using the module_dir variable when generating xorg-server.pc, and by
using join_paths() to assign module_dir unconditionally.
v2: Keep the 'xorg/modules' default path, but use join_paths() unconditionally (Thierry Reding)
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds initial support for displaying Xwayland applications through
the use of EGLStreams and nvidia's custom wayland protocol by adding
another egl_backend driver. This also adds some additional egl_backend
hooks that are required to make things work properly.
EGLStreams work a lot differently then the traditional way of handling
buffers with wayland. Unfortunately, there are also a LOT of various
pitfalls baked into it's design that need to be explained.
This has a very large and unfortunate implication: direct rendering is,
for the time being at least, impossible to do through EGLStreams. The
main reason being that the EGLStream spec mandates that we lose the
entire color buffer contents with each eglSwapBuffers(), which goes
against X's requirement of not losing data with pixmaps. no way to use
an allocated EGLSurface as the storage for glamor rendering like we do
with GBM, we have to rely on blitting each pixmap to it's respective
EGLSurface producer each frame. In order to pull this off, we add two
different additional egl_backend hooks that GBM opts out of
implementing:
- egl_backend.allow_commits for holding off displaying any EGLStream
backed pixmaps until the point where it's stream is completely
initialized and ready for use
- egl_backend.post_damage for blitting the content of the EGLStream
surface producer before Xwayland actually damages and commits the
wl_surface to the screen.
The other big pitfall here is that using nvidia's wayland-eglstreams
helper library is also not possible for the most part. All of it's API
for creating and destroying streams rely on being able to perform a
roundtrip in order to bring each stream to completion since the wayland
compositor must perform it's job of connecting a consumer to each
EGLstream. Because Xwayland has to potentially handle both responding to
the wayland compositor and it's own X clients, the situation of the
wayland compositor being one of our X clients must be considered. If we
perform a roundtrip with the Wayland compositor, it's possible that the
wayland compositor might currently be connected to us as an X client and
thus hang while both Xwayland and the wayland compositor await responses
from eachother. To avoid this, we work directly with the wayland
protocol and use wl_display_sync() events along with release() events to
set up and destroy EGLStreams asynchronously alongside handling X
clients.
Additionally, since setting up EGLStreams is not an atomic operation we
have to take into consideration the fact that an EGLStream can
potentially be created in response to a window resize, then immediately
deleted due to another pending window resize in the same X client's
pending reqests before Xwayland hits the part of it's event loop where
we read from the wayland compositor. To make this even more painful, we
also have to take into consideration that since EGLStreams are not
atomic that it's possible we could delete wayland resources for an
EGLStream before the compositor even finishes using them and thus run
into errors. So, we use quite a bit of tracking logic to keep EGLStream
objects alive until we know the compositor isn't using them (even if
this means the stream outlives the pixmap it backed).
While the default backend for glamor remains GBM, this patch exists for
users who have had to deal with the reprecussion of their GPU
manufacturers ignoring the advice of upstream and the standardization of
GBM across most major GPU manufacturers. It is not intended to be a
final solution to the GBM debate, but merely a baindaid so our users
don't have to suffer from the consequences of companies avoiding working
upstream. New drivers are strongly encouraged not to use this as a
backend, and use GBM like everyone else. We even spit this out as an
error from Xwayland when using the eglstream backend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Seems that while glxvnd relies on some of the hashtable functions in
Xext, we only build hashtable support for Xext if we're also building
the res extension. This leads to some errors if you try to build glx
without res enabled:
glx/liblibglxvnd.a(vndcmds.c.o): In function `LookupVendorPrivDispatch':
/home/lyudess/Projects/xserver/glx/vndcmds.c:65: undefined reference to `ht_find'
/home/lyudess/Projects/xserver/glx/vndcmds.c:67: undefined reference to `ht_add'
glx/liblibglxvnd.a(vndcmds.c.o): In function `GlxDispatchInit':
/home/lyudess/Projects/xserver/glx/vndcmds.c:405: undefined reference to `ht_generic_compare'
/home/lyudess/Projects/xserver/glx/vndcmds.c:405: undefined reference to `ht_generic_hash'
/home/lyudess/Projects/xserver/glx/vndcmds.c:405: undefined reference to `ht_create'
glx/liblibglxvnd.a(vndcmds.c.o): In function `GlxDispatchReset':
/home/lyudess/Projects/xserver/glx/vndcmds.c:468: undefined reference to `ht_destroy'
collect2: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
So, make sure that hashtable.c gets both for both glx and res
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
pixman headers will be included for builds of external modules against
the xorg-server SDK. Make sure pixman is listed as a required module so
that the correct CFLAGS will be added.
Note that the xorg-server.pc generated by the autotools-based build has
many more modules listed, but this seems to be enough to build at least
some of the external drivers against an X server built with Meson (I've
tested with xf86-input-libinput, xf86-video-nouveau and xf86-video-ati).
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Querying a pkg-config variable using the --variable option produces the
value of the given variable as stored in the pkg-config file and should
not be used to add directories to the include search path.
The reason for this is that it breaks cross-compilation, because header
files are installed relative to the host sysroot. pkg-config supports a
PKG_CONFIG_SYSROOT_DIR environment variable that points to this sysroot
and will prepend that to the path of directories in -I or -L options in
pkg-config's Cflags, Libs or Libs.private keywords. However, because no
context can be inferred from variable names, as opposed to the keywords
with fixed meaning, the sysroot path will not be prepended to them. The
build system is responsible for doing so if necessary since it is aware
of the context in which the variable is used.
Adding the include directory returned by pkg-config to the include path
leaks build system information into the cross-build and break with very
confusing errors such as this:
In file included from include/misc.h:82:0,
from dix/atom.c:55:
/usr/include/pthread.h:682:6: warning: '__regparm__' attribute directive ignored [-Wattributes]
__cleanup_fct_attribute;
^~~~~~~~~~~~~~~~~~~~~~~
or this:
In file included from include/misc.h:139:0,
from dix/atom.c:55:
/usr/include/stdlib.h:133:8: error: '_Float128' is not supported on this target
extern _Float128 strtof128 (const char *__restrict __nptr,
^~~~~~~~~
Fix this by replacing the include directory with the appropriate xproto
dependency required to add the correct include directory to the compile
command for subdirectories that are missing the dependency. As detailed
above, this gives pkg-config the opportunity to prepend the sysroot for
all paths in -I compiler options.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The newline in the middle of the awk expression confuses Meson and
causes it to pass only the string before the newline to awk, which will
subsequently fail because it encounters an unterminated string.
One fix would be to escape the newlines ('\\n'), but that causes the
newline to end up in the pkg-config file and separate the ABI version
lines by blank lines.
Instead, simply drop the newlines to make the generated pkg-config file
look more like the one generated as part of the autotools-based build.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Meson stores relative paths for includedir, libdir and friends. These
have to be concatenated with the ${prefix} or ${exec_prefix} variables
to create a working pkg-config file.
While at it, set a default value for the module_dir option so that it
points to the same location as used in the autotools-based build.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xdmcp is an optional dependency, so make sure the build succeeds if it
is missing.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The autotools build gets this from some macros in fontutil, but they're
just wrappers around pkgconfig.
v2: Use same default as autotools (Keith Packard)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
If dri1/2/3 are configured for auto-detection, libdrm is required, as well
as the corresponding proto. (Practically we will always have the
corresponding protos now, as they are part of xorgproto).
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Initial implementation for DRI3 v1.1. Only the DRI3 implementation
is there, backends need to implement the proper hooks.
Version is still set to 1.0 so clients shouldn't use the new
requests yet.
v2: Use depth/bpp instead of DRM formats in requests
v3: Remove DMA fence requests from v1.1
Add screen/drawable modifier sets
v4: Free array returned by 'get_drawable_modifiers()'
v5: Fix FD leak
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Both autotools and meson build systems had complicated logic around
what version of libdrm to require for various options. Remove that and
just check for a new enough version to support all of the options
which need libdrm.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Save any value of the kernel non-desktop property in the xf86Output
structure to avoid non-desktop outputs in the default configuration.
[Also bump randrproto requirement to a version that defines
RR_PROPERTY_NON_DESKTOP - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Just mimic autoconf file for xf86bigfont, screensaver,
xres, xace and xinerama extensions
Signed-off-by: Laurent Carlier <lordheavym@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Just mimic autoconf file, DPMS is disabled with Xquartz
Signed-off-by: Laurent Carlier <lordheavym@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The xdg-output protocol aims at describing outputs in way which is
more in line with the concept of an output on desktop oriented systems.
For now it just features the position and logical size which describe
the output position and size in the global compositor space.
This is however much useful for Xwayland to advertise the output size
and position to X11 clients which need this to configure their surfaces
in the global compositor space as the compositor may apply a different
scale from what is advertised by the output scaling property (to achieve
fractional scaling, for example).
This was added in wayland-protocols 1.10.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
For symmetry with the boolean options. I really do not want to care
whether an option is a tristate if I'm trying to set it explicitly.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
orbea
Peter Hutterer
Jeremy Huddleston Sequoia
Joshua Ashton
pkubaj
Olivier Fourdan
Xaver Hugl
Povilas Kanapickas
Simon Ser
Jon Turney
Jan Beich
Fabrice Fontaine
Adam Jackson
E5ten
Michel Dänzer
Emil Velikov
Alan Coopersmith
Lyude Paul
Eric Anholt
Aaron Plattner
Thierry Reding
Louis-Francis Ratté-Boulianne
Keith Packard
Laurent Carlier