The previous check for AEI on left us with the possibility that AEI is forced
off in the config, but devices are added through evdev nonetheless. A keyboard
added this way can CTRL+C the server. Even when we use kbd, we can set the
mode to RAW, so it's safer alround to to so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Restoring it unconditionally means we restore to whatever tty_mode has as
default value (i.e. 0). K_RAW happens to be 0x00, so we always restore to raw
mode if allowEmptyInput is off.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
This is done to actually change DIX_CFLAGS, as not all "modules" use
XORG_CFLAGS.
Also export the symbols that are required by other modules after
the change.
The warnings corrected were only the ones that should correct
real problems. The most common one is 64 bit integers as
"printf %l" arguments.
Note that there is a patch related to this at:
http://bugs.freedesktop.org/show_bug.cgi?id=18204
These symbols were removed from the X Server, or never declared.
One symbol that may need special attention is XkbBuildCoreState(),
that doesn't have a prototype anywhere, but is called from
xkb/xkbEvents.c:XkbFilterEvents(), and also used by the macros
XkbStateFieldFromRec() and XkbGrabStateFromRec() defined in
include/xkbstr.h.
fb/wfbrename.h also may need some cleanup, as it makes several
"renames" of non existing symbols.
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
When the linux kernel sets the NX bit vm86 segfaults when it tries to execute
code in memory that is not marked EXEC. Such code gets called whenever
we return from a VBIOS call to signal the calling program that the call
is actually finished and that we are not trapping for other reasons (like
IO accesses).
Use mprotect(2) to set these memory ranges PROT_EXEC.
Works around a silly bug in the kernel that causes wakeup storms after
too many keypresses. Should fix the kernel bug too, but this at least
keeps the idle wakeup count below 1000/sec.
Also merge sun_bios.c into sun_vid.c and upstream Solaris patch to
keep aperture device open, to allow mappings to occur after X server
has given up uid 0.
Add automatic detection of the graphic driver to load for sbus devices.
This allows xorg to work on those devices without a "Device" section.
Debian bug#483942.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Usually, the console is set to RAW in the kbd driver. If we hotplug all input
devices (i.e. the evdev driver for keyboards) and the console is left as-is.
As a result, the evdev driver must put an EVIOCGRAB on the device to avoid
characters leaking onto the console. This again breaks many things, amongst
them lirc, in-kernel mouse button emulation and HAL.
This patch sets the console to RAW if AllowEmptyInput is on.
Use-cases:
1. AEI is off
1.1. Only kbd driver is used - behaviour as-is.
1.2. kbd and evdev driver is used: if evdev does not grab the device,
duplicate events are generated.
2. AEI is on
2.1. Only evdev driver is used - behaviour as-is, but evdev does not need
to grab the device anymore.
2.2. evdev and kbd are used: duplicate key events are generated if evdev
does not grab the device.
1.2 is a marginal use-case that can be fixed by adding a "grab" option to the
evdev driver (update of xorg.conf is needed).
2.2 is an issue. If we have no ServerLayout section, AEI is on, but devices
specified in the xorg.conf are still added [1], resulting in duplicate events.
This is a common configuration and needs sorting out.
[1] 2eaed4a10f
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
There is no way this code can have been building for anyone since pciaccess
was merged. BSD and Linux were already using OS code on sparc, the only
people who could want this are Solaris, who should be using pciaccess
anyway.
This code was effectively only used in ix86Pci.c to select PCI config
access type. Nobody should be using that path anymore, in the glorious
pciaccess world; kernel services should get it right for you.
Spiritual revert of 1fa4de80fc. Intel's C
compiler claims to be gcc-compatible; if they're not defining the same
macros as gcc then that's their bug, not ours. Even if we were to do
this aliasing we should do it once and for all in servermd.h.
GNU/kFreeBSD defines __FreeBSD_kernel__, but not __FreeBSD__.
Unify preprocessor conditionals between variable declaration and use.
Debian bug #482550.
Seeing as this code seems to be specific to OpenBSD I don't think
__x86_64__ should have been added there at all. It appears to have
been added wherever __amd64__ existed before which is wrong. I
think that part of the commit should be reverted but also all four of
the checks should be __OpenBSD__ && __amd64__ instead of two one
direction and two flipped.
The jstk code for Joysticks is not used by any module, was never actually compiled and uses an API
that is deprecated these days.
No reason to keep it.
xserver and libpciaccess both need to open /dev/xf86, which can only
be opened once. I implemented pci_system_init_dev_mem() like Ian
suggested. This requires some minor changes to the BSD-specific
os-support code. Since pci_system_init_dev_mem() is a no-op on
FreeBSD this should be no problem.
FindPCIVideoInfo() function isn't need anymore.
xf86scanpci() is being called only once so we don't need permanent
(static) variables there.
restorePciState() is not used for now (until we find why multiple
cards aren't working).
Matches linuxPci.c changes made in 8279444a54
Fixes compiler errors:
"ix86Pci.c", line 194: too many struct/union initializers
"ix86Pci.c", line 204: too many struct/union initializers
"ix86Pci.c", line 214: too many struct/union initializers
Note that pciaccess doesn't yet have Net/OpenBSD support, but the relevant
code should go there instead of disconnected code in the X Server.
While here, remove the now-disabled INCLUDE_XF86_NO_DOMAIN from the headers,
and un-disable xf8StdAccResFromOS for those OSes without domain support which
will need it.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
This was a bunch of poorly defined resource ranges per OS/platform combination
which were supposed to represent what regions could potentially have resources
allocated into them.
A bunch of CFLAGS had gone missing, so the build failed with errors like:
../../../../../hw/xfree86/os-support/linux/lnx_ev56.c:7:19: error: input.h: No such file or directory
../../../../../hw/xfree86/os-support/linux/lnx_ev56.c:8:24: error: scrnintstr.h: No such file or directory
The outport is most likely unnecessary on any currently used hardware,
the byte copy is necessary from what I know on IA64 and friends so leave it.
Add a new API entry point which lets a driver select the old behaviour if
such a needs is ever found.
This gives me ~20% speed up on startup on 945 hardware.
The code in hw/xfree86/os-support/bus/sparcPci.c:simbaCheckBus()
is trying to mimmick VGA routing by disabling I/O space responses
behind the Simba PCI-PCI controller.
Unfortunately, doing this also happens to disable access to the
IDE controller I/O space registers, thus crashing the system. The
granularity of the I/O disabling in the Simba controller is not
fine enough to disable VGA without also disabling the IDE controller
registers.
Formerly we sized an array with a compile time constant, then initialized
its size to the same constant, but the Linux PCI init code would increase
that "constant". So if you happened to have more than 128 PCI devices,
you'd happily scribble into whatever variables happened to be in .bss
after that array.
Only really fixed for Linux atm. Other OSes will simply (still) fail to
work on video devices above the 128th PCI device.
/sys/devices reflects the bus topology, and we don't care that much.
Easier (and more reliable) to just look in /sys/bus/pci/devices, which
is a flat view.
Currently, the call to linuxPciOpenFile() is always made for read
only access which causes the subsequent mmap call to fail when the
memory is mapped read/write.
Xorg #9692
xf86ReadLegacyBIOS is only used by one function in int10/generic.c.
Move a generic implementation of that function there, rename it to
read_legcay_BIOS, and delete all remnants of it from all other places.
Convert xf86GetPciHostConfigFromTag to a new function called
get_parent_bridge. This name better represents what
xf86GetPciHostConfigFromTag is used for: walking up the lists of PCI
bridges from a device.
Eliminate xf86GetPciDomain. The domain from libpciaccess is the
domain. Period. This means that 0 is a valid domain. Make sure that
INCLUDE_XF86_NO_DOMAIN is *not* set. Always run in "domain mode,"
even if the only domain possible is 0.
Convert all uses of PCITAG in int10 and vgaHW to 'struct pci_device'.
This allows the conversion of xf86ReadLegacyVideoBIOS and
xf86MapDomainMemory to 'struct pci_device' from PCITAG.
If we're mapping something in the "legacy range" (0-1Mb), we shouldn't
expand the requested range to the entire 0-1Mb range. Typically this
is for mapping the VGA frame buffer, and some platforms support mmap of
the frame buffer but not the entire 0-1Mb range.
For example, HP sx1000 and sx2000 ia64 platforms can have memory from
0-0x9ffff, VGA frame buffer from 0xa0000-0xbffff, and memory from
0xc0000-0xfffff. On these platforms, we can't map the entire 0-1Mb
range with the same attribute because the memory only supports WB,
while the frame buffer supports only UC. But an mmap of just the
frame buffer should work fine.
Mach64 driver bails out on ia64 because it cannot map device
memory. It turns out that some bogus and unneeded code attempts
to find the root bridge of the device and fails to do so proberly
as there this host-to-pci bridge is not existant. This code has
been around for years although it completely unclear what it had
been intended for. Fixing this by eliminating the bogus code.
Add a generic 'ring the bell' function (console bell on Linux and BSD,
/dev/audio on Solaris), and add DDX functions for this. Make this the
core keyboard's bell.
Port Xvfb and Xnest to this.
Port XFree86 to this, with OS-specific hooks for Linux, BSD, and Solaris
taken from foo_io.c in the old layer.
CFLAGS is a user variable, extracted from the environment at configure time
and settable by the user at build time. We must not override this variable.
broken for any 32 bit X server running on a 64 bit kernel) so #ifdef
them out for now. the PCI rework tree will make all this crap go away,
so I think we can tolerate the extra #ifdef for the next release.
Conflicts:
hw/xfree86/common/xf86Init.c
hw/xfree86/int10/pci.c
hw/xfree86/scanpci/xf86PciData.h
hw/xfree86/scanpci/xf86PciStdIds.h
hw/xfree86/scanpci/xf86PciStr.h
hw/xfree86/scanpci/xf86ScanPci.h
hw/xfree86/utils/pcitweak/pcitweak.c
hw/xfree86/utils/scanpci/scanpci.c
Re-removed most of the conflicting files.
okay? Since xf86MapLegacyIO is called from only one place, cut the
parameter list down to the one parameter that actually conveys some
information: the one that gives a PCI device. Change from using a
PCITAG to a pci_device.
Get rid of almost all uses of these definitions. They're still defined for
delinquent out-of-tree drivers, and also for the Mesa build. As well as
for miinitext.c. But largely gone.
xf86ExtendedInitInt10 to xf86int10GetBiosLocationType and
xf86int10GetBiosSegment.
These changes were tested on MGA hardware on x86-64 with various
combinations of InitPrimary and BiosLocation.
XFree86LOADER ifdefs, non-loadable hasn't been supported for a while
now. Remove completely gratuitious REMOVE_LOADER_CHECK_MODULE_INFO
ifdefs surrounding a call to a function added in XFree86 4.1 (!).
Miscellaneous static markings.
os-support/linux/lnx_KbdMap.c) we overrun the usefully-named global
array 'map', scribbling on other random static variables elsewhere.
This is fixed by changing the size of at2lnx. (David Woodhouse). Bug
#5169
This patch is from DragonFly developer Joerg Sonnenberger and the pkgsrc
collection.
I tested using /dev/sysmouse with moused using my serial /dev/cuaa0.
function pointers to implement a level of flexability that was never
used. The code also had unused support for extracting a single image
type from a larger expansion ROM.
Fix the spelling of PCI_BIOS_OPEN_FIRMWARE.
Fix a couple errors in #ifdef debug code.
These changes have been tested on x86 and x86-64 Linux.
Class information is not, and never has been, stored there. Therefore,
this is just a bunch of elaborate code to read 0x00000000.
This has received testing on x86 and x86-64 Linux.
Attempt to build xeglmodule.c, not xglxmodule.c.
Add xf86Sbus.h to EXTRA_DIST, as _HEADERS doesn't appear to get the same
treatment as _SOURCES in terms of automatically DISTing.
mappings (including left-handed mouse etc.). Fixed incorrect usage of
non-reversed, but ZAxisMapped buttons for state detection. Nuked unused
part of reverseMap.
hw/xfree86/utils/ioport/Makefile.am
Add ioport and pcitweak utils from monolith hw/xfree86/etc dir.
Generate xf86DefModeSet.c from vesamodes & extramodes
Add apSolaris.shar to EXTRA_DIST
LEDs match text console mode state. Move push of streams module earlier
so it's loaded before we start using kbd ioctls provided by the streams
module.
overridden at make install time.
Remove driverdir and inputdir from pkg-config file. The directory layout of
moduledir is fixed and well known by drivers.
programs/Xserver/hw/xfree86/os-support/linux/lnx_apm.c
programs/Xserver/hw/xfree86/os-support/linux/Imakefile Add basic ACPI Linux
support so that events can be passed to the driver. (Alan Hourihane)
Bugzilla #1068 <https://bugs.freedesktop.org/show_bug.cgi?id=1068> Port
Solaris keyboard code to work with kbd driver.
Also incorporated "audio bell" feature from Xsun keyboard DDX to play bell
tones via /dev/audio (specified via Option "BellDevice" "/dev/audio" in
keyboard device options).
Olli Helenius)
- Fix some distcheck problems for non-solaris systems
- Change server version number from the Xorg rev to an independent one
- _POSIX_SOURCE and _XOPEN_SOURCE defined to the right values
Fix the dri and drm build. Fix server-side DMX extension build. Make
xf4bpp use the correct version of mfbline.c for mfbseg.c. Add #ifndef
_HEADERNAME_H_/#define _HEADERNAME_H_/.../#endif to the headers.
- Use x86emu on Solaris instead of vm86
- Better per-OS control over which xf86Kbd*.c and *Pci.c files to build
- Set various #defines to be defined or not on Solaris as needed
Add XSERV_t, TRANS_SERVER, TRANS_REOPEN to quash warnings.
Add #include <dix-config.h> or <xorg-config.h>, as appropriate, to all
source files in the xserver/xorg tree, predicated on defines of
HAVE_{DIX,XORG}_CONFIG_H. Change all Xfont includes to
<X11/fonts/foo.h>.
- support for mouse-like devices that report absolute coordinates
- support for mouse-like devices that need to know screen size so they can
scale absolute coordinates to screen size
- fix 3-button emulation
change "foo.h" to <X11/foo.h> for core headers, e.g. X.h, Xpoll.h;
change "foo.h", "extensions/foo.h" and "X11/foo.h" to
<X11/extensions/foo.h> for extension headers, e.g. Xv.h;
change "foo.[ch]" to <X11/Xtrans/foo.[ch]> for Xtrans files.
(https://bugs.freedesktop.org/attachment.cgi?id=2434) Fix Solaris build
bustage caused by namespace collision between symbols defined in
<sys/kbd.h> and those in "xf86_OSlib.h". Patch by Alan Coopersmith
<alan.coopersmith@sun.com>.
Linux-only fixes: Fix case where a smaller write-combining region
blocks write-combining setting of the whole frame buffer. Fix bug in wc
setting code when regions are first splitted and setting of
write-combining then fails.
xc/programs/Xserver/hw/xfree86/os-support/linux/lnx_io.c
//bugs.freedesktop.org/show_bug.cgi?id=825) attachment #956
(https://bugs.freedesktop.org/attachment.cgi?id=956): Fix build
problems on Linux/SPARC. Patch by Jeremy Huddleston
<eradicator@gentoo.org>. Approved in the 2005-01-31 Xorg
release-wranglers phone call.
permissions when no access to HW registers is required. For API changes
which mostly involve the modifications to make the RRFunc (introduced
with 6.8) more flexible please check Bugzilla #2407. NOTE: This patch
applies changes to OS specific files for other OSes which I cannot
test.
relied on the generic VGA layer to restore text console fonts for us
when shutting down the server or VT switching back to the text console.
This has worked rather well but it has some downsides on Linux: a. Many
people use fbdev as console text mode. In this case it is not necessary
to save/restore console fonts as the console is running in graphics
mode anyway. b. Some architectures don't have a fbdev console but
require a full POST of even the primary card (ie. IA64). This posting
has to take place before we even have a chance to save anything.
Therefore the fonts we save are the once written to the chip by POST,
not what has been programmed by the user. c. Certain chipsets utilize
the BIOS to perform mode setting. This may interfer with the vga
save/restore font function in a strange way. It would therefore be
preferrable to let the OS - which has been used to set up the font in
the first place - take care of saving/restoring the data. I will attach
a patch which will do so for Linux. To make this fully functional a
small patch needs to be applied to the Linux kernel. To disable this
feature add: #define DoOSFontRestore NO to your host.def. (Bugzilla
#2277)
Avoid PIO access on IA64. Some IA64 machine check if legacy ports outside
the VGA range are accessed. The ATi driver however does this to probe
for ISA Mach8/32/64. Since no IA64 has ISA slots this restriction
should not be relevant to the user.
Avoid recursive calls of xf86scanpci(). This function normally detects that
it has been called before by checking if the PCI structure is filled
out. So far if this was not the case (because PCI probing has failed
for some reason) the function is traversed again. With the chipset
specific PCI bus probing this can lead to an endless recursive loop as
the post-probing code calls xf86scanpci() from within this function.
The OS specific PCI code for Linux worked only if bus 0 was populated as it
checked for the presence of /proc/bus/pci/00. Fixed to check for
/proc/bus/pci/<bus_to_look_for> instead.
update references to xf86site.def in comments (Bug #1827).
fix kbd driver for wskbd protocol and pure wscons console driver (Bug
#1825).
don't add '-4' to generated default file name (bug #1826).
typo in resource name (XFree86 bug #1300, X.org bug #1825)
XScreenSaverSetAttributes() followed by XScreenSaverUnsetAttributes().
Caused by missing FreeResource() in XScreenSaverUnsetAttributes().
Removing unused DDC sections that caused misinterpretation of DDC data due
to a missing break statement in a switch.
Fixed typo: #if <-> #ifdef.
#defines/-D options.
programs/Xserver/hw/xfree86/common/xf86DPMS.c Use defaultDPMSEnabled global
for the default state of DPMS if not set in any config files.
programs/Xserver/hw/xfree86/os-support/sunos/solaris-sparcv8plus.S Add
support for required assembly inline functions for Sun compilers on
Solaris/sparc.
Add support for Solaris/sparc libraries.
chipsets can be probed without OS support as probing them is only
possible using ACPI. One example of this are the HP ZX1/2 chipsets:
previously the code assumed that these chips were present when no other
of the known chipsets could be probed. This assumption brought SGI
Altrix machines with 64 CPUs to a grinding halt.
build fixes for AMD64.
Made shm* functions in the libc_wrapper more standard conformant by setting
errno correctly.
Use xf86ExendedInitInt10() in VBEExtendedInit() to be able to pass flags.
Improved support for Compose and Kana Lock LED's on Sun keyboards
Add event definitions for additional keys on Sun Japanese keyboards
VUID mouse protocol support for Solaris Make default mouse message clearer
on machines that use a default other than /dev/mouse.
(XFree86 Bugzilla #1438, John Heasley). "To fix this, I've added a
mouse buffer (Xisb buffer) "scale" value to the MouseDevPtr type. If
set, it is used as structure size of which we want space for a few."
IA64 (Egbert Eich).
Fixed wrong function prototype (Egbert Eich).
Don't test for generic VGA on IA64 (Egbert Eich).
Fixed a segfault when accessing a structure before verifying the pointer
exists (Egbert Eich).
Added a showcache option for debugging (Egbert Eich).
Increase default video RAM size to 16MB when DRI is enabled and more than
128MB are available (Egbert Eich). Fixed lockups during mode switch.
Problem was introduced when attempting to copy the behavior during
LeaveVT()/EnterVT() but but forgetting to call I810DRILeave() before
I810DRIEnter(). The entire DRILeave()/Enter() scenario has been
commented out as it didn't seem to be necessary (Egbert Eich).
Fix TweakMemorySize() (tested with i855/i865) (Egbert Eich).
increased MAX_DEVICES to 128 (Egbert Eich).
Use OS provided PCI config space access as default method (Egbert Eich).
Added support for Linux 2.6 proc file format.
Fixed unaligned accesses to pieces of the VBE info block. VESA did not
align elements to size (Egbert Eich).
builds with non-gcc compilers that refuse to let you do return
function_that_returns_void(...)
programs/Xserver/hw/xfree86/os-support/shared/sigiostubs.c Remove includes
of xf86drm.h that break non-DRI builds
xc/config/cf/Imake.rules Correct comment to match rule name for
InstallDriverSDKObjectModule
xc/programs/Xserver/hw/xfree86/os-support/sunos/sun_kbd.c Log results of
ioctls to probe keyboard type & layout
Peter Hutterer
Julien Cristau
Robert Noland
Keith Packard
Paulo Cesar Pereira de Andrade
Adam Jackson
Alan Coopersmith
Matthieu Herrb
Egbert Eich
Bernhard R. Link
Peter Hutterer
Mathieu Bérard
Michel Dänzer
Daniel Stone
Tiago Vignatti
Ian Romanick
Dave Airlie
Brad Smith
Kazuhiro Inaoka
Matt Turner
Sascha Hlusiak
Doug Chapman
Mark Kettenis
Coleman Kane
David S. Miller
Samuel Thibault
Eamon Walsh
Matthias Hopf
Ben Byer
Eric Anholt
Adam Jackson
Blair Sadewitz
Jeremy C. Reed
Jonathan Lim
Lennart Buytenhek
Matthieu Herrb
Bastian Blank
David Nusinow
Matthias Drochner
Jared D. McNeill
Jay Cotton
Jay Estabrook
Alan Hourihane
Bjorn Helgaas
George Sapountzis
Dave Airlie
Bram Verweij
Keith Packard
Bernhard Rosenkraenzer
Egbert Eich
Thomas Hellstrom
Myron Stowe
Donnie Berkholz
Keith Packard
Jesse Barnes
Ian Romanick
Adam Jackson
Kristian Høgsberg
Tilman Sauerbeck
Greg Kroah-Hartman
Eric Anholt
Martin Bochnig
Ian Romanick
Adam Jackson
Benjamin Herrenschmidt
Jeremy C. Reed
Kevin E Martin
Kean Johnson
Luc Verhaegen
Thomas Hellstrom
Roland Mainz
Egbert Eich
Markus Kuhn
Alex Deucher
Søren Sandmann Pedersen
Kaleb Keithley