It is possible for vblank events to run out of order with respect to one
another because the event which was queued to the kernel has the privilege
of running before all other events are handled. This allows kernel-queued
events to run before other, older events which should've run first.
Although this isn't a huge problem now, it will become more problematic
after the next change which ties DRI client notifications to TearFree page
flips. This increases the likelihood of DRI clients erroneously receiving
presentation-completion notifications out of order; i.e., a client could
receive a notification for a newer pixmap it submitted *before* receiving a
notification for an older pixmap.
Ensure vblank events always run in sequential order by removing the bias
towards kernel-queued events, and therefore forcing them to run at their
sequential position in the queue like other events.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
There is more than one place with the confusing TearFree state check for a
CRTC. Instead of open-coding the TearFree check everywhere, introduce a
helper, ms_tearfree_is_active_on_crtc, to cover the TearFree state checks.
Suggested-by: Martin Roukala <martin.roukala@mupuf.org>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Check that the VT is owned and that the CRTC is on before exporting info to
Present stating that TearFree is available. Also, since `trf->buf[0].px` is
checked, the `ms->drmmode.tearfree_enable` check is redundant and can
therefore be removed.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
The event allocation for ms_do_pageflip is leaked on error because callers
of ms_do_pageflip have no way of knowing whether or not a page flip
succeeded for any CRTCs. If a page flip succeeded for at least one CRTC,
then it's not safe for the caller to free the event allocation, and the
allocation won't be leaked. The event allocation is only leaked when not a
single CRTC's page flip succeeded.
Since all callers of ms_do_pageflip allocate the event pointer, and all of
them intentionally leak the event allocation when ms_do_pageflip returns an
error, just free the event pointer inside ms_do_pageflip when a page flip
doesn't succeed for any CRTC.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
The CRTC pointer will soon be needed in the TearFree flip handlers, so pass
it in instead of passing in drmmode_tearfree_ptr.
No functional change.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Rather than passing the reference CRTC's vblank pipe to ms_do_pageflip,
just pass the pointer to the reference CRTC directly instead. This is
clearer and more useful than the vblank pipe, since the vblank pipe is only
used to identify whether or not a given CRTC is the reference CRTC.
No functional change.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This #ifdef is redundant since ms_do_pageflip is already enclosed within a
larger GLAMOR_HAS_GBM #ifdef.
No functional change.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This moves lnx_platform.c to the shared directory and adds it to
the BSD build. This is needed for PRIME render offload.
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This allows developers to setup Xwayland as a subproject of a
Wayland compositor, and have it correctly pick up the features
advertised in the dependency variables.
Signed-off-by: Simon Ser <contact@emersion.fr>
Remove the xwayland.pc.in file:
- This avoids writing down each pkg-config variable twice: once in
the Meson files to set the configuration data, once in the .pc.in
file to print it.
- We'll be able to re-use the same variables for use as a
subproject.
Signed-off-by: Simon Ser <contact@emersion.fr>
If wl_output provides us with an output name, use that as well.
If we have both xdg_output.name and wl_output.name (from version >= 4),
prefer the latter.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>#
See-also: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/189
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
With the wl_output protocol, the actual bind to the interface is done in
xwl_output_create().
Pass the version number from the registry so we can bind to the minimum
version.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Currently, Xwayland assigns sequential output names for XRandR. When an
output is hotplugged, a new name is assigned sequentially (XWAYLAND0,
XWAYLAND1, etc.). This is a problem because if a monitor is unplugged
and plugged again, it will get a new name each time.
Luckily, xdg-output provides us with a name for the outputs.
Even though the protocol states that the name is not a reflection of the
underlying DRM connector name, it is to remain consistent across
sessions with the same hardware and software configuration.
So we could use the xdg-output name for the XRandR reported name for the
output.
Doing so is a bit tricky though, because the output name is set at
creation and is not supposed to change. The xdg-output event that
provides us with the name will come at a later time.
So we just allocate a default fixed size for the output name at creation
and just replace the default output name with the xdg-output name when
that is known.
Also, historically, some X11 clients were expecting output names in
Xwayland to be named XWAYLAND<x> and used that to check whether they
were running on Xwayland. Those clients should now use the Xwayland X11
extension which is designed specifically for that purpose.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1353
See-also: https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/954
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Since commit 204f10c2, we notify XRandR clients that the randr
configuration has changes as soon as an new output is created.
Yet, this might be premature, considering that at that point, we are
still to receive the wl_output and xdg-output events that will most
likely change the setup.
So instead of calling RRTellChanged() from xwl_output_create(), wait
until we get to call apply_output_change(), which occurs after the done
events from both xdg-output and wl_output are received.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Some drivers (e.g. AMD GFX8-) don't support explicit format
modifiers. On these drivers, gbm_bo_create_with_modifiers()
will fail. This results in "Error getting buffer" in the logs
later on with all X11 windows staying invisible.
Fallback to the modifier-less API gbm_bo_create() in that case.
Signed-off-by: Simon Ser <contact@emersion.fr>
The window might be retained in the damage list after
`xwl_screen_post_damage` in certain conditions. This means we need to
check if the window is already in the list to avoid adding the same
window twice which will lead to list corruption resulting in server freeze
in `xwl_screen_post_damage`.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
With Wayland 1.21 being our baseline, we do not need to compile
wl_pointer.axis_v120 conditionally.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
With libdecor, when the state changes (in the configure handler), we
need to commit the libdecor frame but also the wl_surface, otherwise
the surface is left in a uncommitted state until a wl_surface commit
eventually occurs later.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: c74c6add3e - xwayland: add optional support for libdecor
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
If the dmabuf protocol's feedback object gave us a new list of
modifiers, send PresentCompleteModeSuboptimalCopy to the client
to inform them that they need to call GetSupportedModifiers.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This adds to xwl_glamor_is_modifier_supported, where if feedback
is in use we will check that the format/mod is allowed in any
device advertised by the compositor.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Move dev_formats declaration to where it's used in
xwl_feedback_is_modifier_supported
* Add curly braces around multi-line statement in
xwl_glamor_is_modifier_supported ]
If protocol version 4 of linux_dmabuf is in use, then the compositor
may not return anything with the modifiers event. We instead
will return the formats/mods reported for the main device.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Move main_dev declaration to where it's used in
xwl_glamor_get_formats
* Add empty line between variable declaration and comment ]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
[ Michel Dänzer:
* Sort protocol #includes lexically.
* memcpy to &xwl_feedback->main_dev directly in
xwl_dmabuf_feedback_main_device. ]
This creates xwl_add_format_and_mod_to_list, which is a helper
that adds a format/mod combo to a xwl_format* list. This will
be used by both the modifier event handling and the tranche
format handling.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
There are systems where softpipe is the default renderer,
e.g. when llvmpipe is not is not available. Using glamor
on such systems is never a good idea.
This mirrors what commit 0a9415cf79
did for llvmpipe.
Closes: #1417
Signed-off-by: Ivan A. Melnikov <iv@altlinux.org>
For details on the protocol itself see the Wayland merge request:
https://gitlab.freedesktop.org/wayland/wayland/-/merge_requests/72
The v120 event has a value base of 120, so one wheel detent is 120, half a
wheel is 60, etc. This is the API Windows has been using since Vista but it
requires HW support from the device. Logitech mice and many Microsoft mice of
the last decade or so have support and it's enabled in the kernel since v5.0.
The new events replace wl_pointer.axis_discrete events, once you bind to
wl_pointer >= 8 you only get the v120 events. So backwards compatibility
is simple, we just multiply the discrete events if we get them and
treat everything as 120 event internally.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Leasable displays do not have any actual associated Wayland output and
are not available to regular X11 clients and left entirely to the
application who requests the lease.
As these are not actually managed by the Wayland compositor and left
entirely to the "lessee" application, the viewporter protocol required
for the XRandR emulation is not usable on such devices.
We should therefore not advertise the XRandR emulated modes for those
leasable displays.
This also solves a problem with implementations of glXGetMscRateOML()
which is used notably by Chromium/Electron. Applications using this
which will begin lagging/stuttering exponentially over
time, trying to look up a non-existent mode with 0x0 as returned by
XF86VidModeGetModeLine() with XRandR emulation for such devices.
See-also: https://github.com/labwc/labwc/issues/553
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Make sure info->active and info->vt_active are false after
dropping drm master.
Normally, this is done when pausing the first input device, so it
breaks when there are no input device at all.
Fixes: da9d012a9 ("xf86/logind: Fix drm_drop_master before vt_reldisp")
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1387
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
The X server swapping code is a huge attack surface, much of this code
is untested and prone to security issues. The use-case of byte-swapped
clients is very niche, so let's disable this by default and allow it
only when the respective config option or commandline flag is given.
For Xorg, this adds the ServerFlag "AllowByteSwappedClients" "on".
For all DDX, this adds the commandline options +byteswappedclients and
-byteswappedclients to enable or disable, respectively.
Fixes#1201https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1029
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 5145742fb6 accidentally bumped the videodrv ABI version from 26.0
to 26.6 in one go.
Change it back to 26.1 as per the documented process for minor additions.
Fixes: 5145742fb6 - randr: introduce rrCrtcGetInfo DDX function
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
This fixes an issue with GLFW-based games failing to set the resolution
when the user request to switch back to the native display mode.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
This allows rrCrtcGetInfo to override the values in the XRRCrtcGetInfo
reply. One use case is to allow Xwayland to return the current emulated
mode for the specific client instead of the global mode.
Signed-off-by: Minh Phan <phanquangminh217@gmail.com>
Acked-by: Olivier Fourdan <ofourdan@redhat.com>
Implements the xwayland_shell protocol which makes the surface
association happen via a shared serial, rather than sharing a wl_surface
resource ID across an X atom.
This solves a race that can happen if the wl_surface
associated with a WL_SURFACE_ID for a window was destroyed before the
update of the atom was processed by the compositor and another surface
(or other object) had taken its id due to recycling.
Closes: #1157
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
If atomic modesetting is to be enabled in the configuration file, log
whether this is supported and eventually enabled or disabled.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
The modesetting driver has atomic modesetting disabled by default but
can be enabled (if supported) using a configuration option.
Add this option in the man page.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
This adds support for TearFree page flips to eliminate tearing without the
use of a compositor. It allocates two shadow buffers for each CRTC, a back
buffer and a front buffer, and uses damage tracking to minimize excessive
copying between buffers and skip unnecessary flips when the screen's
contents remain unchanged. It works on transformed screens too, such as
rotated and scaled CRTCs.
When PageFlip is enabled, TearFree won't force fullscreen DRI clients to
synchronize their page flips to the vblank interval.
TearFree is disabled by default.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
The DRM event queue in the kernel is quite small and can be easily
exhausted by DRI clients. When the event queue is full, that means nothing
can be queued onto it anymore, which can lead to incorrect presentation
times for DRI clients and failure when attempting to queue a page flip.
To make matters worse, once an event is placed onto the kernel's event
queue, there's no straightforward way to prematurely remove it from the
kernel's event queue in userspace, which means that aborting a sequence
number doesn't free up space in the event queue.
Since vblank events from DRI clients are the largest consumers of the
event queue, and since it's often easy to know the desired target MSC of
their vblank events without querying the kernel for a CRTC's current MSC,
we can coalesce vblank events occurring at the same MSC such that only one
of them is placed onto the kernel's event queue, instead of allowing
duplicate vblank events to pollute the event queue.
This is achieved by tracking the next kernel-queued event's MSC on a
per-CRTC basis and then running all of that CRTC's vblank event handlers
which have reached their target MSC when the queued MSC is signaled.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
do_queue_flip_on_crtc() is about to be used to flip buffers other than the
primary scanout (`ms->drmmode.fb_id`), so make it generic to accept any
frame buffer ID, as well as x and y coordinates in the frame buffer, to
flip on a given CRTC. Move the retry logic from queue_flip_on_crtc() into
it as well, so that it's robust for all callers.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Shadow buffers are about to be used for TearFree, so make the shadow buffer
helpers generic such that they can be used to create arbitrary per-CRTC
shadows aside from just the per-CRTC rotated buffer.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
xf86RotateCrtcRedisplay() is about to be used outside of xf86Rotate.c in
order to copy transformed pixmaps, so fix up its interface by specifying
the source drawable and destination pixmap rather than assuming the root
drawable and rotated pixmap, respectively. In addition, add an argument to
make xf86RotateCrtcRedisplay() not perform any transformations, which is an
indicator that it should only copy a transformed pixmap rather than
actually transform a pixmap.
These changes make it possible to use xf86RotateCrtcRedisplay() to not
only copy transformed pixmaps, but also actually transform pixmaps, making
it very useful outside of xf86Rotate.c.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Updated the for-loop that iterates over the received EGLConfigs to
include the very first EGLConfig with index 0.
Signed-off-by: Doğukan Korkmaztürk <dkorkmazturk@nvidia.com>
Fixes: 8469241592 - xwayland: Add EGL-backed GLX provider
The virgl driver exposes the name of the host renderer which might be llvmpipe.
In this case we still need glamor to be initialized.
Only check if the renderer starts with llvmpipe (which is what llvmpipe exposes).
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The current X server infrastructure sets modesetting driver as default driver
to handle PCI-hotplug of a GPU device. This prevents the respective DDX driver
(like AMDGPU DDX driver) to take control of the card.
This patch:
- Adds a few functions and fine-tunes the GPU hotplug infrastructure to allow
the DDX driver to be loaded, if it is configured in the X config file
options as "hotplug-driver".
- Scans and updates the PCI device list before adding the new GPU device
in platform, so that the association of the platform device and PCI device
is in place (dev->pdev).
- Adds documentation of this new option
An example usage in the config file would look like:
Section "OutputClass"
Identifier "AMDgpu"
MatchDriver "amdgpu"
Driver "amdgpu"
HotplugDriver "amdgpu"
EndSection
V2:
Fixed typo in commit message (Martin)
Added R-B from Adam.
Added ACK from Alex and Martin.
V3:
Added an output class based approach for finding the DDX driver (Aaron)
Rebase
V4:
Addressed review comment from Aaron:
GPU hot-plug handling driver's name to be read from the DDX config file options.
In this way only the DDX drivers interested in handling GPU hot-plug will be
picked and loaded, for others modesetting driver will be used as usual.
V5:
Addressed review comments from Aaron:
- X config option to be listed in CamelCase.
- Indentation fix at one place.
- Code readability related optimization.
V6:
Addressed review comments from Aaron:
- Squash the doc in the same patch
- Doc formatting changes
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Aaron Plattner aplattner@nvidia.com (v3)
Acked-by: Martin Roukala martin.roukala@mupuf.org(v1)
Acked-by: Alex Deucher alexander.deucher@amd.com (v1)
Reviewed-by: Adam Jackson ajax@redhat.com(v1)
Signed-off-by: Shashank Sharma shashank.sharma@amd.com
Current error:
ld: error: undefined symbol: xf86EnableIO
>>> referenced by xf86Configure.c
>>> libxorg_common.a.p/xf86Configure.c.o:(DoConfigure) in archive hw/xfree86/common/libxorg_common.a
>>> referenced by xf86Events.c
>>> libxorg_common.a.p/xf86Events.c.o:(xf86VTEnter) in archive hw/xfree86/common/libxorg_common.a
>>> referenced by xf86Init.c
>>> libxorg_common.a.p/xf86Init.c.o:(InitOutput) in archive hw/xfree86/common/libxorg_common.a
>>> referenced 1 more times
Commit 8a5f3ddb2 ("set tag on our surface") introduced the use of tags
to differentiate our own surfaces, and commit a1d14aa8c ("Clear the
"xwl-window" tag on unrealize") removed the tags before the surfaces are
actually destroyed.
Xwayland would then rely on these tags on the surface to decide whether
to ignore or to process the Wayland event in various places.
However, in doing so, it also checked for the tag on keyboard leave
events.
As a result, if the keyboard leave events is received after the X11
window is unrealized, keyboard_handle_leave() would not queue the
LeaveNotify events for the DIX to proceed, and the key repeat would
kick in and repeat the key event indefinitely.
To avoid the issue, process events regardless of the tag as before
in keyboard_handle_leave().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 8a5f3ddb2 - "xwayland: set tag on our surface"
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1395
Tested-by: Renan Guilherme Lebre Ramos <japareaggae@gmail.com>
Tested-by: Stefan Dirsch <sndirsch@suse.de>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Multiplanar GBM buffers can point to different objects from each plane.
Use the _for_plane API when possible to retrieve the correct prime FD
for each plane.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Tested-by: Guido Günther <agx@sigxcpu.org>
Check the fd for validity before giving a success return code.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Tested-by: Guido Günther <agx@sigxcpu.org>
Now that we keep the Wayland surface around for longer than the
xwl_window, we might get events for that surface after the X11 window
is unrealized.
Make sure we untag the Wayland surface when the Wayland surface is
delayed, to break the wl_surface/xwl_window relationship, so that events
for that surface are discarded by Xwayland.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Fixes: e37f18ee9 - xwayland: Delay wl_surface destruction
a77d95af61 intended to do this, but the
check for “is this rootless or rootful XWayland” was inverted.
Fixes: a77d95af61 ("xwayland: Prevent Xserver grabs with rootless")
Signed-off-by: Demi Marie Obenour <demiobenour@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
hw/xwayland/xwayland.c:306:10: fatal error: 'X11/extensions/xwaylandproto.h' file not found
#include <X11/extensions/xwaylandproto.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 2700bc6045 ("xwayland: add support for the XWAYLAND extension")
X11 and Wayland requests are unordered, causing a race in the X11 window
and wl_surface association.
To mitigate that race, delay the wl_surface destruction by 1 second,
so that the compositor has time to establish the association before the
wl_surface is destroyed: to see both the wl_surface created and the
WL_SURFACE_ID X11 property set.
This is only a mitigation though, a more robust solution requires a
future dedicated Wayland protocol.
v2: Clean up pending wl_surface destroy on exit as well.
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1157
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Joshua Ashton <joshua@froggi.es>
Tested-by: Sterophonick <sterophonick@gmail.com>
See-also: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/163
Changes check for trying modesetting driver from if defined(__linux__)
to use meson check for if we built the driver for this platform.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Because of the design of most Wayland compositors, where the compositor
is both a Wayland server and an X11 window manager, any X11 client
issuing a server grab (i.e. XGrabServer()) can possibly hang the whole
desktop when Xwayland is running rootless.
This can happen with e.g. ImageMagick's import command with mutter.
1. "import" is launched and issues an XServerGrab(),
2. Xwayland restricts access to that "import" X11 client alone,
3. mutter continues to process events until it needs to sync with
Xwayland (there's variability in time before the hang occurs),
4. When mutter does an XSync() (explicitly or implicitly through some
other Xlib call), it will stop waiting for Xwayland to reply,
5. Xwayland waits for the XServerGrab() to be released by import,
6. "import" waits for a user input to release the XServerGrab(),
7. mutter is stuck waiting on Xwayland and does not process input
events...
To prevent this, re-route the GrabServer/UngrabServer requests and
pretend the grab works but actually does nothing at all for all clients
but the X11 window manager (which can still issue X11 server grabs, at
its own risks).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Closes: https://bugzilla.redhat.com/1914021
I wanted to simplify the logic, and thought this is a good opportunity
to eliminate local diffs.
I don't want to list OSes without wsfb, because I understand that is a
netbsd/openbsd driver, and always have it as a fallback for us.
Additionally, I understand "fbdev" is linux-specific, so have the logic
match this intent.
Fixes accidentally taking the WL_POINTER_AXIS_HORIZONTAL_SCROLL case as
well after the WL_POINTER_AXIS_VERTICAL_SCROLL case, which resulted in
vertical wheel events triggering both vertical and horizontal scrolling.
Fixes: e37eeb7af2 ("xwayland: Aggregate scroll axis events to fix kinetic scrolling")
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1367
This extension exists to serve one purpose: reliably identifying
Xwayland. Previous attempts at doing so included querying root window
properties, output names or input device names. All these attempts are
somewhat unreliable. Instead, let's use an extension - where that
extension is present we have an Xwayland server.
Clients should never need to do anything but check whether the extension
exists through XQueryExtension or search through XListExtensions.
This extension provides a single QueryVersion request only, and
that is only to provide future compatibility if we ever need anything
other than "this extension exists" functionality.
https://gitlab.freedesktop.org/xorg/proto/xorgproto/-/merge_requests/54
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not that it actually matters since the typedef is int32_t anyway, but
this theoretically avoids an erroneous call to wl_fixed_to_double() on
that value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 7cdcdfea0 introduced a new command line option
"-force-xrandr-emulation", however it is missing from the
ddxProcessArgument().
As a result, trying to use that command option would result in a error:
(EE) Unrecognized option: -force-xrandr-emulation
Make sure "-force-xrandr-emulation" is accounted for in Xwayland's
ddxProcessArgument().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: 7cdcdfea0 - xwayland: Add -force-xrandr-emulation switch
Pointer scroll events are collected in xwl_seat->pending_pointer_event
as they are received in the pointer_handle_axis and
pointer_handle_axis_discrete callbacks. They are dispatched together as a
single event when pointer_handle_frame is called which "Indicates the end of a
set of events that logically belong together" [1]. This patch also sends an
event with dx=0, dy=0 when pointer_handle_axis_stop is called, which is what
allows XWayland clients to recognise the end of a touchpad scroll.
[1] https://wayland.app/protocols/wayland#wl_pointer:event:frame
Signed-off-by: David Jacewicz <david.jacewicz27@protonmail.com>
Fixes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/926
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When running rootful, the Xwayland window is not decorated (as all
Wayland surfaces), which makes it quite inconvenient to move on screen.
libdecor is "a client-side decorations library for Wayland clients"
which can be used precisely for adding decorations to Wayland surfaces.
Add optional support for libdecor in Xwayland to gain decorations when
running rootful and a new command line option "-decorate".
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1332
That allows to differentiate Xwayland's own surfaces from others.
This is preparation work for optional libdecor support.
v2: Check for surface not being NULL (Jonas Ådahl <jadahl@gmail.com>)
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The app_id is used to identify applications (and group windows), some
desktops (such as GNOME Shell) use it in their top bar.
Set the XDG toplevel "app_id" to "org.freedesktop.Xwayland" and install
a desktop file for Xwayland rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
So that when running rootful, the compositor can close the Xwayland
window using the xdg-toplevel protocol.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Set a meaningful title for the xdg_surface, it's nicer when running
rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Currently, when running rootful, the toplevel root surface is created in
the same function as the rest of the Wayland surfaces.
Move it to its own function to improve readability - No function change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a new command line option "-host-grab" to disable the keyboard
shortcuts and confine the pointer on the host so that Xwayland can
receive all keyboard events.
This is useful when running a complete desktop environment within
Xwayland rootful.
Use [CTRL]+[SHIFT] to release the keyboard and pointer.
This option is not compatible with rootless mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland tries to be smart and guess the intention of the X11 clients
sometimes, like issuing a pointer lock when a client hides the pointer
when confined.
While this is a good thing when running rootless, this is problematic
when running rootful as the pointer will be automatically locked unless
the "retro" mode is used (which doesn't hide the cursor, unlike the
default).
Make sure we don't trigger the automatic pointer lock when the cursor is
hidden when running rootful.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a new command line option "-fullscreen" to make the rootful Xwayland
window appear fullscreen.
This requires viewport support in the compositor and when used with
"-geometry" can emulate the full range of XRandR resolutions.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When updating the overall screen size, Xwayland would first walk the
window tree then update both the xwl_screen and screen size.
As a result, if any ResizeWindow() handler tries to use the xwl_screen
size, it would get the old (wrong) size instead of the new one.
Make sure to update the xwl_screen size first, prior to traverse the
window tree.
This is preparation work for Xwayland fullscreen mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When using xrandr emulation, the emulated mode is passed as a pointer to
the XRandR mode from the xwl_output associated with the X11 client.
In preparation for fullscreen mode, we want to be able to reuse that
code but use a separate emulated mode.
Simply change the internal API to pass a reference to the emulated mode.
This introduces no functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The xdg_toplevel object was used solely when creating the window
surface, and the value of the object discarded.
To be able to make the surface fullscreen using the xdg_toplevel
protocol, we need to have access that object, so keep it around along
with the xwl_window.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of the output the surface enters/leaves.
This is fairly basic tracking though, we do not keep a full list of
outputs a surface may be covering partially, we just keep the output
the surface entered last.
This is sufficient as a preparation work for fullscreen though.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add a convenient function to get the xwl_output from a given wl_output.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
When running rootless as well as rootful, Xwayland gets its outputs
configuration from the Wayland compositor.
When running rootful, it means that we end up with a large black
surface the size of all monitors combined, that's not very convenient
and there is no way for set the desired size of the Xwayland window.
Add a new command line option "-geometry" to force a specific mode when
running rootful for the user to specify the root window size to use for
Xwayland.
That option has no effect when Xwayland is running rootless.
v2: Not using libxcvt as the mode may not be a valid CVT mode.
v3: Add a set of XRandR modes and the RR hooks to make that work.
Update the man page for Xwayland.
v4: Add RandR 1.0 support for older clients
v5: Fix XVidMode failing with a BadMatch
v6: Add a separate xwl_output specifically for fixed mode, instead of
using the existing output list - that will allow for further
improvements like a fullscreen mode eventually.
v7: Sort the RR modes
v8: Fix RandR 1.0
v9: Add physical size
v10: Cleanup
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1338
update_screen_size() takes an xwl_output argument, mostly for historical
reasons, whereas it actually applies to a screen (as its name implies).
Reshuffle the code to take an xwl_screen instead, in preparation for
the geometry mode in Xwayland - No functional change.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland uses an output serial number it increments each time a new
Wayland output is added.
On server regeneration, that static value is not cleared, and therfore
the output numbers keep increasing each time the Xserver restarts.
To avoid that issue, make the output serial part of the xwl_screen,
which gets recreated on server regeneration, so that index is reset to 0
automatically on server regeneration.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Xwayland's own SetWindowPixmap() handler would be ignored when running
rootful.
This is fine as long as we do not plan to resize the root window,
however this is becoming problematic if we plan to resize the root
window dynamically when running rootful.
Just add the xwl_window_set_window_pixmap() handler regardless of
rootful/rootless mode.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The function xwl_output_remove() is called when removing a monitor, but
the actual status of the RandR output does not change.
So, when RRTellChanged() is called from update_screen_size(), it won't
have the output connection status up to date in the RandR event
RROutputChangeNotifyEvent and X11 applications relying on that event
like Qt will fail to emit their signal QGuiApplication::screenRemoved.
To avoid that issue, make sure to mark the RandR output as disconnected
prior to call xwl_output_remove().
Fix commit 204f10c29 ("xwayland: Call RRTellChanged if the RandR configuration may have changed")
Signed-off-by: zhoulei <zhoulei@kylinos.cn>
Signed-off-by: Morose <chenlinxiang@kylinos.cn>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Move the xcb_aux_sync into the shm path, where we do still need it to
synchronize access with the host. In the non-shm path the image is
copied to the host anyway so the sync just adds latency and keeps you
from using all your network bandwidth.
Only the non-shm-putimage path benefits from this, but the benefit is
significant even on the local machine (here a 3.2GHz Core i7-8700, using
XEPHYR_NO_SHM=1):
before after Operation
------------ -------------------- -------------------------
228000000.0 225000000.0 (0.987) Dot
40900000.0 41600000.0 (1.017) 1x1 rectangle
10400000.0 10700000.0 (1.029) 10x10 rectangle
477000.0 471000.0 (0.987) 100x100 rectangle
30900.0 31800.0 (1.029) 500x500 rectangle
760000.0 981000.0 (1.291) PutImage 10x10 square
14700.0 19200.0 (1.306) PutImage 100x100 square
320.0 382.0 (1.194) PutImage 500x500 square
749000.0 984000.0 (1.314) ShmPutImage 10x10 square
268000.0 304000.0 (1.134) ShmPutImage 100x100 square
16600.0 18500.0 (1.114) ShmPutImage 500x500 square
Reviewed-by: Emma Anholt <emma@anholt.net>