When Xorg gets started directly from a wayland-gdm the crtc still has the
wayland hw cursor set. Combine this with Xorg immediately falling back to
a sw cursor because a slave-output has a monitor attached at startup; and
we end up with the wayland hardware cursor overlay fixed in its last
position + the Xorg sw cursor resulting in 2 cursors.
This commit fixes this by hiding any left-over cursors when initializing
the crtc.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The modesetting driver may be driving 2 screens (slave and master
gpu), which may have different behavior wrt hardware cursor support.
So stop using static variables and instead store the hw-cursor support
related data in a per screen struct. While at it actually make it per
crtc data as in theory different crtc's could have different hw-cursor
support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Embarassingly, it looks like I introduced this dead function in
commit 13c7d53df8 a year ago.
Nothing ever used it, not even then.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Commit 80e64dae: "modesetting: Implement PRIME syncing as a sink" originally was
supposed to have this line, but it was dropped as part of the merge process.
Foregoing the NULL assignment causes a ton of problems with dereferencing
uninitialized memory.
Signed-off-by: Alex Goins <agoins@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
In newer laptops with switchable graphics, the GPU may have 0 outputs,
in this case the modesetting driver should still load if the GPU is
SourceOffload capable, so that it can be used as an offload source provider.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Server GPUs often have a VNC feature attached to allow remote console.
The controller implementing this feature is usually not very powerful,
and we can easily swamp it with work. This is made somewhat worse by
damage over-reporting the size of the dirty region, and a whole lot
worse by applications (or shells) that update the screen with identical
pixel content as was already there.
Fix this by double-buffering the shadow fb, using memcmp to identify
dirty tiles on each update pass. Since both shadows are in host memory
the memcmp is cheap, and worth it given the win in network bandwidth.
The tile size is somewhat arbitrarily chosen to be one cacheline wide at
32bpp on Intel Core.
By default we enable this behaviour for (a subset of) known server GPUs;
the heuristic could use work.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
24bpp front buffers tend to be the least well tested path for client
rendering. On the qemu cirrus emulation, and on some Matrox G200 server
chips, the hardware can't do 32bpp at all. It's better to just allocate
a 32bpp shadow and downconvert in the upload hook than expose a funky
pixmap format to clients.
[ajax: Ported from RHEL and separate modesetting driver, lifted kbpp
into the drmmode struct, cleaned up commit message, fixed 16bpp]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlied <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
[hdegoede@redhat.com: rebase, also use kbpp for rotate shadow fb]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
With the previous patch, the modesetting driver can now return whether
the driver supports hw cursor. However, it alone doesn't suffice,
unfortunately. drmmode_load_cursor_argb_check() is called in the
following chain:
xf86CursorSetCursor()
-> xf86SetCursor()
-> xf86DriverLoadCursorARGB()
-> xf86_load_cursor_argb()
-> xf86_crtc_load_cursor_argb()
-> drmmode_load_cursor_argb_check()
*but* at first with drmmode_crtc->cursor_up = FALSE. Then the
function doesn't actually set the cursor but returns TRUE
unconditionally. The actual call of drmmode_set_cursor() is done at
first via the show_cursor callback, and there is no check of sw cursor
fallback any longer at this place. Since it's called only once per
cursor setup, so the xserver still thinks as if the hw cursor is
supported.
This patch is an ad hoc fix to correct the behavior somehow: it does
call drmmode_set_cursor() at the very first time even if cursor_up is
FALSE, then quickly hides again. In that way, whether the hw cursor
is supported is evaluated in the right place at the right time.
Of course, it might be more elegant if we have a more proper mechanism
to fall back to sw cursor at any call path. But it'd need more
rework, so I leave this workaround as is for now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The modesetting driver still has an everlasting bug of invisible
cursor on cirrus and other KMS drivers where no hardware cursor is
supported. This patch is a part of an attempt to address it.
This patch particularly converts the current load_cursor_argb callback
of modesetting driver to load_cursor_argb_check so that it can return
whether the driver handles the hw cursor or falls back to the sw
cursor.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
[hdegoede@redhat.com: Add extra comment suggested by Kenneth]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The error value isn't always -EINVAL, e.g. the kernel drm core returns
-ENXIO when the corresponding ops doesn't exist. Without this fix,
DRM_IOCTL_MODE_CURSOR2 would be dealt as success even if it
shouldn't.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
DPMS would prevent page flip / vblank events from being raised, freezing
the screen until PRIME flipping was reinitialized. To handle DPMS cleanly,
suspend PRIME page flipping when DPMS mode is not on, and resume it when
DPMS mode is on.
v1: Initial commit
v2: Moved flipping_active check from previous commit to here
v3: Unchanged
v4: Unchanged
v5: Move flipping_active check to sink support commit
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
Implements (Enable/Disable)SharedPixmapFlipping and
SharedPixmapNotifyDamage, the sink functions for PRIME synchronization and
double buffering. Allows modesetting driver to be used as a sink with PRIME
synchronization.
Changes dispatch_slave_dirty to flush damage from both scanout pixmaps.
Changes drmmode_set_scanout_pixmap*() functions to
drmmode_set_target_scanout_pixmap*() that take an additional parameter
PixmapPtr *target. Then, treat *target as it did prime_pixmap. This allows
me to use it to explicitly set both prime_pixmap and prime_pixmap_back
individually. drmmode_set_scanout_pixmap() without the extra parameter
remains to cover the single-buffered case, but only works if we aren't
already double buffered.
driver.c:
Add plumbing for rr(Enable/Disable)SharedPixmapFlipping and
SharedPixmapNotifyDamage.
Change dispatch_dirty_crtc to dispatch_dirty_pixmap, which functions the
same but flushes damage associated with a ppriv instead of the crtc, and
chanage dispatch_slave_dirty to use it on both scanout pixmaps if
applicable.
drmmode_display.h:
Add flip_seq field to msPixmapPrivRec to keep track of the event handler
associated with a given pixmap, if any.
Add wait_for_damage field to msPixmapPrivRec to keep track if we have
requested a damage notification from the source.
Add enable_flipping field to drmmode_crtc_private_rec to keep track if
flipping is enabled or disabled.
Add prime_pixmap_back to drmmode_crtc_private_rec to keep track of back
buffer internally.
Add declarations for drmmode_SetupPageFlipFence(),
drmmode_EnableSharedPixmapFlipping(),
drmmode_DisableSharedPixmapFlipping, drmmode_SharedPixmapFlip(), and
drmmode_SharedPixmapPresentOnVBlank().
Move slave damage from crtc to ppriv.
drmmode_display.c:
Change drmmode_set_scanout_pixmap*() functions to
drmmode_set_target_scanout_pixmap*() that take an additional parameter
PixmapPtr *target for explicitly setting different scanout pixmaps.
Add definitions for functions drmmode_SharedPixmapFlip(),
drmmode_SharedPixmapPresentOnVBlank(),
drmmode_SharedPixmapPresent(),
drmmode_SharedPixmapVBlankEventHandler(),
drmmode_SharedPixmapVBlankEventAbort(),
drmmode_EnableSharedPixmapFlipping(), and
drmmode_DisableSharedPixmapFlipping,
drmmode_InitSharedPixmapFlipping(), and
drmmode_FiniSharedPixmapFlipping, along with struct
vblank_event_args.
The control flow is as follows:
pScrPriv->rrEnableSharedPixmapFlipping() makes its way to
drmmode_EnableSharedPixmapFlipping(), which sets enable_flipping to
TRUE and sets both scanout pixmaps prime_pixmap and
prime_pixmap_back.
When setting a mode, if prime_pixmap is defined, modesetting
driver will call drmmode_InitSharedPixmapFlipping(), which if
flipping is enabled will call drmmode_SharedPixmapPresent() on
scanout_pixmap_back.
drmmode_SharedPixmapPresent() requests that for the source to
present on the given buffer using master->PresentSharedPixmap(). If
it succeeds, it will then attempt to flip to that buffer using
drmmode_SharedPixmapFlip(). Flipping shouldn't fail, but if it
does, it will raise a warning and try drmmode_SharedPixmapPresent()
again on the next vblank using
drmmode_SharedPixmapPresentOnVBlank().
master->PresentSharedPixmap() could fail, in most cases because
there is no outstanding damage on the mscreenpix tracked by the
shared pixmap. In this case, drmmode_SharedPixmapPresent() will
attempt to use master->RequestSharedPixmapNotifyDamage() to request
for the source driver to call slave->SharedPixmapNotifyDamage() in
response to damage on mscreenpix. This will ultimately call
into drmmode_SharedPixmapPresentOnVBlank() to retry
drmmode_SharedPixmapPresent() on the next vblank after
accumulating damage.
drmmode_SharedPixmapFlip() sets up page flip event handler by
packing struct vblank_event_args with the necessary parameters, and
registering drmmode_SharedPixmapVBlankEventHandler() and
drmmode_SharedPixmapVBlankEventAbort() with the modesetting DRM
event handler queue. Then, it uses the drmModePageFlip() to flip on
the next vblank and raise an event.
drmmode_SharedPixmapPresentOnVBlank() operates similarly to
drmmode_SharedPixmapFlip(), but uses drmWaitVBlank() instead of
drmModePageFlip() to raise the event without flipping.
On the next vblank, DRM will raise an event that will ultimately be
handled by drmmode_SharedPixmapVBlankEventHandler(). If we flipped,
it will update prime_pixmap and prime_pixmap_back to reflect that
frontTarget is now being displayed, and use
drmmode_SharedPixmapPresent(backTarget) to start the process again
on the now-hidden shared pixmap. If we didn't flip, it will just
use drmmode_SharedPixmapPresent(frontTarget) to start the process
again on the still-hidden shared pixmap.
Note that presentation generally happens asynchronously, so with
these changes alone tearing is reduced, but we can't always
guarantee that the present will finish before the flip. These
changes are meant to be paired with changes to the sink DRM driver
that makes flips wait on fences attached to dmabuf backed buffers.
The source driver is responsible for attaching the fences and
signaling them when presentation is finished.
Note that because presentation is requested in response to a
vblank, PRIME sources will now conform to the sink's refresh rate.
At teardown, pScrPriv->rrDisableSharedPixmapFlipping() will be
called, making its way to drmmode_FiniSharedPixmapFlipping().
There, the event handlers for prime_pixmap and prime_pixmap_back
are aborted, freeing the left over parameter structure. Then,
prime_pixmap and prime_pixmap back are unset as scanout pixmaps.
Register and tear down slave damage per-scanout pixmap instead of
per-crtc.
v1: Initial commit
v2: Renamed PresentTrackedFlippingPixmap to PresentSharedPixmap
Renamed flipSeq to flip_seq
Warn if flip failed
Use SharedPixmapNotifyDamage to retry on next vblank after damage
v3: Refactor to accomodate moving (rr)StartFlippingPixmapTracking and
(rr)(Enable/Disable)SharedPixmapFlipping to rrScrPrivRec from ScreenRec
Do damage tracking on both scanout pixmaps
v4: Tweaks to commit message
v5: Revise for internal storage of prime pixmap ptrs
Move disabling for reverse PRIME from source commit to here
Use drmmode_set_target_scanout_pixmap*() to set scanout pixmaps
internally to EnableSharedPixmapFlipping().
Don't support flipping if ms->drmmode.pageflip == FALSE.
Move flipping_active check to this commit
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
drmmode_set_scanout_pixmap_(cpu/gpu) would only do teardown if ppix ==
NULL. This meant that if there were consecutive calls to
SetScanoutPixmap(ppix != NULL) without calls to SetScanoutPixmap(ppix ==
NULL) in between, earlier calls would be leaked. RRReplaceScanoutPixmap()
does this today.
Instead, when setting a scanout pixmap, always do teardown of the existing
scanout pixmap before setting up the new one. Then, if there is no new one
to set up, stop there.
This maintains the previous behavior in all cases except those with
multiple consecutive calls to SetScanoutPixmap(ppix != NULL).
v1: N/A
v2: N/A
v3: N/A
v4: N/A
v5: Initial commit
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
modesetting relied on randr_crtc->scanout_pixmap being consistent with
calls to SetScanoutPixmap, which is very fragile and makes a lot of
assumptions about the caller's behavior.
For example, RRReplaceScanoutPixmap(), when dropping off with !size_fits,
will set randr_crtc->scanout_pixmap = NULL and then call SetScanoutPixmap.
Without this patch, drmmode_set_scanout_pixmap_(cpu/gpu) will think that
there is no scanout pixmap to tear down, because it's already been set to
NULL.
By keeping track of the scanout pixmap in its internal state, modesetting
can avoid these types of bugs and reduce constraints on calling
conventions.
v1: N/A
v2: N/A
v3: N/A
v4: N/A
v5: Initial commit
v6: Rebase onto ToT
v7: Unchanged
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Goins <agoins@nvidia.com>
If we're doing reverse-prime; or doing rotation the main fb is not used,
and there is no reason to add it in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
drmmode_set_mode_major() is the only user of drmmode->fb_id and will
create it if necessary.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This ensures the fb gets re-added when a shared pixmap is re-used for
a second drmmode_set_scanout_pixmap_cpu call.
Note currently the xserver never re-uses a shared pixmap in this way,
so this is mostly a sanity fix.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
drmmode_set_scanout_pixmap_gpu(pix) adds drmmod->fb_id through a call
to drmmode_xf86crtc_resize(), but on a subsequent
drmmode_set_scanout_pixmap_gpu(NULL) it would not remove the fb.
This keeps the crtc marked as busy, which causes the dgpu to not
being able to runtime suspend, after an output attached to the dgpu
has been used once. Which causes burning through an additional 10W
of power and the laptop to run quite hot.
This commit adds the missing remove fb call, allowing the dgpu to runtime
suspend after an external monitor has been plugged into the laptop.
Note this also makes drmmode_set_scanout_pixmap_gpu(NULL) match the
behavior of drmmode_set_scanout_pixmap_cpu(NULL) which was already
removing the fb.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This is an ABI break, in that we now pass NULL to a function that hasn't
accepted it before.
Alex Goins had a different patch for this but it wasn't symmetrical, it
freed something in a very different place than it allocated it, this
attempts to retain symmetry in the releasing of the backing bo.
v2: use a new toplevel API, though it still passes NULL to something
that wasn't expecting it.
v3: pass -1 instead of 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Goins <agoins at nvidia.com>
No longer needed now that xf86CursorResetCursor is getting called for
each CRTC configuration change.
v2: Keep xf86_reload_cursors as a deprecated empty inline function
until all drivers stop calling it. (Adam Jackson)
Reviewed-by: Adam Jackson <ajax@redhat.com>
Use this instead of the (now deprecated) cursor pointer in the
xf86CrtcConfigRec.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Fix build without --enable-glamor.
Caught by the arm tinderbox.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Both radeon and amdgpu don't set the mode until the first blockhandler,
this means everything should be rendered on the screen correctly by
then.
This ports this code, it also removes the tail call of EnterVT from
ScreenInit, it really isn't necessary and causes us to set a dirty mode
with -modesetting always anyways.
v2: reorder set desired modes vs block handler as done for amdgpu.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This adds support using glamor for background None.
loosely based off the amdgpu code. relies on the glamor_finish code.
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Setting crtc->transformPresent to FALSE was preventing the transform
from actually taking effect and putting RandR into a confused state.
Now that the RandR 1.2 cursor code handles transforms correctly, we can
allow them to properly take effect.
Reviewed-by: Keith Packard <keithp@keithp.com>
DestroyPixmap handles that just fine. This also lets us drop our use
of the manual image destruction function (Note that the radeon driver
still uses it in a similar fashion, though).
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The ifdef checks for XF86_CRTC_VERSION >= 3/5 are remnants from the
out-of-tree driver. Within the tree, we can rely on:
xf86Crtc.h:#define XF86_CRTC_VERSION 6
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
We calloc() output_ids. Let's free() it, too.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a bug where running the card out of PPLL's when hotplugging
another monitor would result in all of the displays going blank and
failing to work properly until X was restarted or the user switched to
another VT.
[Michel Dänzer: Pass errno instead of -ret to strerror()]
[Daniel Martin: Add \n to log message]
Picked from xf86-video-ati
7186a87 Handle failures in setting a CRTC to a DRM mode properly
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
A user on a nouveau-driven card ran into a problem where DVI-D-1 and
DVI-I-1 were aliasing. The simplest fix is to provide the full connector
names. While we're at it, rename the output names to match what is in
the kernel, and start counting the connectors from 1 rather than 0. The
only deviation is HDMI vs HDMI-A, which kept its original name.
This will break backwards compatibility with existing xorg.conf's that
reference output names, but the alternative is to create a separate
counting system, further disconnecting from the kernel names.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This adds zaphod and ZaphodHeads support
to the the in-server modesetting driver.
this is based on a request from Mario,
and on the current radeon driver, along
with some patches from Mario to bring things
up to the state of the art in Zaphod.
v2: fixup vblank fd registring.
v3: squash Mario's fixes.
modesetting: Allow/Fix use of multiple ZaphodHead outputs per x-screen.
modesetting: Take shift in crtc positions for ZaphodHeads configs into account.
modesetting: Add ZaphodHeads description to man page.
small cleanups (airlied).
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
glamor_name_from_pixmap and glamor_fd_from_pixmap return CARD16 and
CARD32 values via pointers. The current code uses uint16_t and
uint32_t which will probably be the same but it's safer to use the
datatypes as specified by the function.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
One of the lacking features with output offloading was
that screen rotation didn't work at all.
This patch makes 0/90/180/270 rotation work with USB output
and GPU outputs.
When it allocates the shared pixmap it allocates it rotated,
and any updates to the shared pixmap are done using a composite
path that does the rotation. The slave GPU then doesn't need
to know about the rotation and just displays the pixmap.
v2:
rewrite the sync dirty helper to use the dst pixmap, and
avoid any strange hobbits and rotations.
This breaks ABI in two places.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes modesetting when glamor is disabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Based on code by Keith Packard, Eric Anholt, and Jason Ekstrand.
v2:
- Fix double free and flip_count underrun (caught by Mario Kleiner).
- Don't leak flip_vblank_event on the error_out path (Mario).
- Use the updated ms_flush_drm_events API (Mario, Ken).
v3: Hack around DPMS shenanigans. If all monitors are DPMS off, then
there is no active framebuffer; attempting to pageflip will hit the
error_undo paths, causing us to drmModeRmFB with no framebuffer,
which confuses the kernel into doing full modesets and generally
breaks things. To avoid this, make ms_present_check_flip check that
some CRTCs are enabled and DPMS on. This is an ugly hack that would
get better with atomic modesetting, or some core Present work.
v4:
- Don't do pageflipping if CRTCs are rotated (caught by Jason Ekstrand).
- Make pageflipping optional (Option "PageFlip" in xorg.conf.d), but
enabled by default.
v5: Initialize num_crtcs_on to 0 (caught by Michel Dänzer).
[airlied: took over]
v6: merge async flip support from Mario Kleiner
free sequence after failed vblank queue
handle unflip while DPMS'ed off (Michel)
move flip tracking into its own structure, and
fix up reference counting issues, and add comments.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This adds support for reverse prime to the modesetting driver.
Reverse prime is where we have two GPUs in the display chain,
but the second GPU can't scanout from the shared pixmap, so needs
an extra copy to the on screen pixmap.
This allows modesetting to support this scenario while still
supporting the USB offload one.
v1.1:
fix comment + ret = bits (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The code in drmmode_set_cursor does not properly handle the case where
drmModeSetCursor2 returns any other error than EINVAL and silently fails to set
a cursor.
So only return when the drmModeSetCursor2 succeeds (i.e returns 0) and disable
the cursor2 usage on EINVAL.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1205725
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This adds tiling support to the server modesetting driver,
it retrieves the tile info from the kernel and translates
it into the server format and exposes the property.
v2.1: fix resetting tile property (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is ported from the same code in the ati and intel drivers,
It uses the same option name as nvidia and the other DDXes to
disable tearing down outputs as it is hard to avoid racing with clients.
v2: address two issues with DeleteUnusedDP12 enabled, reported
by Daniel Martin,
a) check we have a mode_output before destroying it
b) only delete *unused* displays (thanks Aaron for clarifying)
so we check if the output has a crtc and if it does we don't
delete it.
v3: drop the option to delete unused displays, just encode
behaviour into the randr spec.
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to cache the mode resources and with dynamic
connectors for mst support we don't want to. So first clean that
up before adding dynamic connector support.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This replaces the stubs for shadow buffer creation/allocation with actual
functions and adds a shadow_destroy function. With this, we actually get
shadow buffers and RandR now works properly. Most of this is copied from
the xf86-video-intel driver and modified for modesetting.
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Fix build with --disable-glamor
- Set the pixel data pointer in the pixmap header for dumb shadow bo's
- Call drmmode_create_bo with the right bpp
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Make shadow buffers per-crtc and leave shadow_enable alone
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The original drmmode_glamor_new_screen_pixmap function was specific to the
primary screen pixmap. This commit pulls the guts out into a new, more
general, drmmode_set_pixmap_bo function for setting a buffer on a pixmap.
The new function also properly tears down the glamor bits if the buffer
being set is NULL. The drmmode_glamor_new_screen_pixmap function is now
just a 3-line wrapper around drmmode_set_pixmap_bo.
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Re-arranged code in drmmode_set_pixmap_bo and
drmmode_glamor_handle_new_screen_pixmap so that glamor_set_screen_pixmap
only gets called for the screen pixmap
- Guard the call to glamor_set_screen_pixmapa with a drmmode->glamor check
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We basically want it throughout the driver.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't want to try to vblank synchronize to monitors which are off.
In order to handle that properly, we need to know the CRTC's DPMS mode.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Hidden cursors also have their image updated; re-enabling the cursor
each time the image is set will cause it to re-appear.
* Unifies the code that was in drmmode_load_cursor_argb and
drm_mode_show_cursor and moves it to a new drmmode_set_cursor
* Add a new boolean, 'cursor_up', to the per-crtc
private data to track whether the cursor should be displayed.
* Call drmmode_set_cursor from drm_mode_show_cursor and, if
the cursor should be displayed, from drm_mode_load_cursor_argb.
v2: Call drmModeSetCursor2 when loading a new cursor image if the
cursor should be displayed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
For performance, Glamor wants to render to tiled buffers, not linear
ones. Using GBM allows us to pick the 3D driver's preferred tiling
modes.
v2: Declare drmmode->gbm as void * if !GLAMOR_HAS_GBM.
v3: Just use a forward declaration of struct gbm_device.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This code is going to be extended to support GBM BOs soon. This small
abstraction removes a lot of direct dumb_bo access, so we can add that
support in one place, rather than putting conditionals at every
pitch/handle/etc access.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Hans De Goede
Kenneth Graunke
Alex Goins
Adam Jackson
Dave Airlie
Takashi Iwai
Dave Airlie
Michel Dänzer
Keith Packard
Eric Anholt
Daniel Martin
Ilia Mirkin
Robert Ancell
Adel Gadllah
Jason Ekstrand